complexity saved much any more. A simple benchmark (grail) showed
that there were 3 times as many misses as hits, and the same number of
times again the code was bypassed altogether due to the existence of
setattro/getattro.
this many bytes have been read, readlines stops. Because of
buffering, the amount of bytes read is usually at least 8K more than
the hint.
Also changed read() and readline() to use PyArg_ParseTuple().
(Note that the *previous* checkin also fixed error handling and
narrowed the range of thread unblocking for all methods using
fread().)
see if we can guess the #bytes until the end of the file. If we
can't, increment the buffer size increments up to 0.5Meg to avoid
realloc'ing too much.
The table size is now constrained to be a power of two, and we use a
variable increment based on GF(2^n)-{0} (not that I have the faintest
idea what that is :-) which helps avoid the expensive '%' operation.
Some of the entries in the table of polynomials have been modified
according to a post by Tim Peters.
Rather than allocating a list object for the fast locals and another
(extensible one) for the value stack and allocating the block stack
dynamically, allocate the block stack with a fixed size (CO_MAXBLOCKS
from compile.h), and stick the locals and value stack at the end of
the object (this is now possible since the stack size is known
beforehand). Get rid of the owner field and the nvalues argument --
it is available in the code object, like nlocals.
This requires small changes in ceval.c only.
sequence, otherwise
operator.indexOf([4, 3, 2, 1], 9) would raise a SystemError!
Note: it might be wise to double check all these functions. I haven't
done that yet.
object pointers. Should be a bit faster than the C library's qsort(),
and doesn't have the prohibition on recursion that Solaris qsort() has
in the threaded version of their C library.
Thanks to discussions with Tim Peters.
defines that a shorter dictionary is always smaller than a longer one.
For dictionaries of the same size, the smallest differing element
determines the outcome (which yields the same results as before,
without explicit sorting).
be Ellipsis!).
Bumped the API version because a linker-visible symbol is affected.
Old C code will still compile -- there's a b/w compat macro.
Similarly, old Python code will still run, builtin exports both
Ellipses and Ellipsis.
Removed im_doc attribute; __name__ and __doc__ are now handled by
special casing in instancemethodgetattr(). This saves a few bytes and
INCREF/DECREF calls per i.m. object allocation/deallocation.
getcounts() returns a list of counts of allocations and
deallocations for all different object types.
getobjects(n [, type ]) returns a list of recently allocated
and not-yet-freed objects of the given type (all
objects if no type given). Only the n most recent
(all if n==0) objects are returned.
getcounts is only available if compiled with -DCOUNT_ALLOCS,
getobjects is only available if compiled with -DTRACE_REFS. Note that
everything must be compiled with these options!
entirely redone operator overloading. The rules for class
instances are now much more relaxed than for other built-in types
(whose coerce must still return two objects of the same type)
* Objects/floatobject.c: add overflow check when converting float
to int and implement truncation towards zero using ceil/float
* Objects/longobject.c: change ValueError to OverflowError when
converting to int
* Objects/rangeobject.c: modernized
* Objects/stringobject.c: use HAVE_LIMITS instead of __STDC__
* Objects/xxobject.c: changed to use new style (not finished?)
and __setattr__ support to override getattr(x, name) and
setattr(x, name, value) for class instances. This uses a special
hack whereby the class is supposed to be static: the __getattr__
and __setattr__ methods are looked up only once and saved in the
instance structure for speed
* funcobject.c (func_repr): don't call getstringvalue(None) for anonymous
functions.
* bltinmodule.c: removed lambda (which is now a built-in function);
removed implied lambda for string arg to filter/map/reduce.
* Grammar, graminit.[ch], compile.[ch]: replaced lambda as built-in
function by lambda as grammar entity: instead of "lambda('x: x+1')" you
write "lambda x: x+1".
* Xtmodule.c (checkargdict): return 0, not NULL, for error.
* posixmodule.c: don't prototype getcwd() -- it's not portable...
* mappingobject.c: double-check validity of last_name_char in
dict{lookup,insert,remove}.
* arraymodule.c: need memmove only for non-STDC Suns.
* Makefile: comment out HTML_LIBS and XT_USE by default
* pythonmain.c: don't prototype getopt() -- it's not standardized
* socketmodule.c: cast flags arg to {get,set}sockopt() and addrbuf arg to
recvfrom() to (ANY*).
* pythonrun.c (initsigs): fix prototype, make it static
* intobject.c (LONG_BIT): only #define it if not already defined
* classobject.[ch]: remove all references to unused instance_convert()
* mappingobject.c (getmappingsize): Don't return NULL in int function.
each dir in sys.path, try each possible extension. (Note: C extensions
are loaded before Python modules in the same directory, to allow having
a C version used when dynamic loading is supported and a Python version
as a back-up.)
* import.c (reload_module): test for error from getmodulename()
* moduleobject.c: implement module name as dict entry '__name__' instead
of special-casing it in module_getattr(); this way a module (or
function!) can access its own module name, and programs that know what
they are doing can rename modules.
* stdwinmodule.c (initstdwin): strip ".py" suffix of argv[0].
* {tuple,list,mapping,array}object.c: call printobject with 0 for flags
* compile.c (parsestr): use quote instead of '\'' at one crucial point
* arraymodule.c (array_getattr): Added __members__ attribute
* object.[ch], bltinmodule.c, fileobject.c: changed str() to call
strobject() which calls an object's __str__ method if it has one.
strobject() is also called by writeobject() when PRINT_RAW is passed.
* ceval.c: rationalize code for PRINT_ITEM (no change in function!)
* funcobject.c, codeobject.c: added compare and hash functionality.
Functions with identical code objects and the same global dictionary are
equal. Code objects are equal when their code, constants list and names
list are identical (i.e. the filename and code name don't count).
(hash doesn't work yet since the constants are in a list and lists can't
be hashed -- suppose this should really be done with a tuple now we have
resizetuple!)
setlistslice() can be used to cut the unused part out of a freshly made
slice (as done by bagof()). [needed by the next mod!]
* structural changes to bagof(), map() etc.
* PROTO.h, mymalloc.h: added #ifdefs for TURBOC and GNUC.
* allobjects.h: added #include "rangeobject.h"
* Grammar: added lambda_input; relaxed syntax for exec.
* bltinmodule.c: added bagof, map, reduce, lambda, xrange.
* tupleobject.[ch]: added resizetuple().
* rangeobject.[ch]: new object type to speed up range operations (not
convinced this is needed!!!)
* Grammar: add exec statement; allow testlist in expr statement.
* ceval.c, compile.c, opcode.h: support exec statement;
avoid optimizing locals when it is used
* fileobject.{c,h}: add getfilename() internal function.
shared. The default is to save references to the integers in
the range -1..99. The lower limit can be set by defining
NSMALLNEGINTS (absolute value of smallest integer to be saved)
and NSMALLPOSINTS (1 more than the largest integer to be
saved).
tupleobject.c: Save a reference to the empty tuple to be returned
whenever a tuple of size 0 is requested. Tuples of size 1
upto, but not including, MAXSAVESIZE (default 20) are put in
free lists when deallocated. When MAXSAVESIZE equals 1, only
share references to the empty tuple, when MAXSAVESIZE equals
0, don't include the code at all and revert to the old
behavior.
object.c: Print some more statistics when COUNT_ALLOCS is defined.
without .py file); Bill's dynamic loading for SunOS using shared
libraries.
pwdmodule.c (mkgrent): remove DECREF of uninitialized variable.
classobject.c (instance_getattr): Fix case when class lookup returns
unbound method instead of function.
image objects, and lots of new methods.
* Added counting of allocations and deallocations of builtin types if
COUNT_ALLOCS is defined. Had to move calls to NEWREF down in some
files.
* Bug fix in sorting lists.
objects of its derived classes; allow anything that has an attribute
named "__privileged__" access to anything.
* object.[ch]: added hasattr() -- test whether getattr() will succeed.
* many files: made some functions static; removed "extern int errno;".
* frozenmain.c: fixed bugs introduced on 24 June...
* flmodule.c: remove 1.5 bw compat hacks, add new functions in 2.2a
(and some old functions that were omitted).
* timemodule.c: added MSDOS floatsleep version .
* pgenmain.c: changed exit() to goaway() and added defn of goaway().
* intrcheck.c: add hack (to UNIX only) so interrupting 3 times
will exit from a hanging program. The second interrupt prints
a message explaining this to the user.
Added $(SYSDEF) to its build rule in Makefile.
* cgensupport.[ch], modsupport.[ch]: removed some old stuff. Also
changed files that still used it... And made several things static
that weren't but should have been... And other minor cleanups...
* listobject.[ch]: add external interfaces {set,get}listslice
* socketmodule.c: fix bugs in new send() argument parsing.
* sunaudiodevmodule.c: added flush() and close().
function found as instance data.
* socketmodule.c: added 'flags' argument sendto/recvfrom, rewrite
argument parsing in send/recv.
* More changes related to access (terminology change: owner instead of
class; allow any object as owner; local/global variables are owned
by their dictionary, only class/instance data is owned by the class;
"from...import *" now only imports objects with public access; etc.)
* Added "access *: ...", made access work for class methods.
* Introduced subclass check: make sure that when calling
ClassName.methodname(instance, ...), the instance is an instance of
ClassName or of a subclass thereof (this might break some old code!)
yet). The class is now passed to eval_code and stored in the current
frame. It is also stored in instance method objects. An "unbound"
instance method is now returned when a function is retrieved through
"classname.funcname", which when called passes the class to eval_code.
(1) dictionaries/mappings now have attributes values() and items() as
well as keys(); at the C level, use the new function mappinggetnext()
to iterate over a dictionary.
(2) "class C(): ..." is now illegal; you must write "class C: ...".
(3) Class objects now know their own name (finally!); and minor
improvements to the way how classes, functions and methods are
represented as strings.
(4) Added an "access" statement and semantics. (This is still
experimental -- as long as you don't use the keyword 'access' nothing
should be changed.)
before it.
* ceval.c, object.c: moved testbool() to object.c (now extern visible)
* stringobject.c: fix bugs in and rationalize string resize in formatstring()
* tokenizer.[ch]: fix non-working code for lines longer than BUFSIZ
f_fastlocals in a traceback object (this is a core dump hazard
if there are <nil> entries), but instead eval_code() merges the fast
locals back into the locals dictionary if it looks like the local
variables will be retained. Also, the merge routines save
exceptions since this is sometimes needed (alas!).
* Added id() to bltinmodule.c, which returns an object's address
(identity). Useful to walk arbitrary data structures containing
cycles.
* Added compile() to bltinmodule.c and compile_string() to
pythonrun.[ch]: support to exec/eval arbitrary code objects. The
code that defaults globals and locals is moved from run_node in
pythonrun.c (which is now identical to eval_node) to eval_code in
ceval.c. [XXX For elegance a clean-up session is necessary.]
lookup (opcode.h, ceval.[ch], compile.c, frameobject.[ch],
pythonrun.c, import.c). The .pyc MAGIC number is changed again.
Added get_menu_text to flmodule.
* Stubs for faster implementation of local variables (not yet finished)
* Added function name to code object. Print it for code and function
objects. THIS MAKES THE .PYC FILE FORMAT INCOMPATIBLE (the version
number has changed accordingly)
* Print address of self for built-in methods
* New internal functions getattro and setattro (getattr/setattr with
string object arg)
* Replaced "dictobject" with more powerful "mappingobject"
* New per-type functio tp_hash to implement arbitrary object hashing,
and hashobject() to interface to it
* Added built-in functions hash(v) and hasattr(v, 'name')
* classobject: made some functions static that accidentally weren't;
added __hash__ special instance method to implement hash()
* Added proper comparison for built-in methods and functions
* Fixcprt.py: added [-y file] option, do only files younger than file.
* modsupport.[ch]: added vmkvalue().
* intobject.c: use mkvalue().
* stringobject.c: added "formatstring"; renamed string* to string_*;
ceval.c: call formatstring for string % value.
* longobject.c: close memory leak in divmod.
* parsetok.c: set result node to NULL when returning an error.
Guido van Rossum
Barry Warsaw
Jack Jansen
Sjoerd Mullender