that have taken me "too long" to reverse-engineer over the years.
Vastly reduced the nesting level and redundancy of #ifdef-ery.
Took a light stab at repairing comments that are no longer true.
sys_gettotalrefcount(): Changed to enable under Py_REF_DEBUG.
It was enabled under Py_TRACE_REFS, which was much heavier than
necessary. sys.gettotalrefcount() is now available in a
Py_REF_DEBUG-only build.
mechanism is no longer evil: it no longer plays dangerous games with
the type pointer or refcounts, and objects in extension modules can play
along too without needing to edit the core first.
Rewrote all the comments to explain this, and (I hope) give clear
guidance to extension authors who do want to play along. Documented
all the functions. Added more asserts (it may no longer be evil, but
it's still dangerous <0.9 wink>). Rearranged the generated code to
make it clearer, and to tolerate either the presence or absence of a
semicolon after the macros. Rewrote _PyTrash_destroy_chain() to call
tp_dealloc directly; it was doing a Py_DECREF again, and that has all
sorts of obscure distorting effects in non-release builds (Py_DECREF
was already called on the object!). Removed Christian's little "embedded
change log" comments -- that's what checkin messages are for, and since
it was impossible to correlate the comments with the code that changed,
I found them merely distracting.
In the past, an object's tp_compare could return any value. In 2.2
the docs were tightened to require it to return -1, 0 or 1; and -1 for
an error.
We now issue a warning if the value is not in this range. When an
exception is raised, we allow -1 or -2 as return value, since -2 will
the recommended return value for errors in the future. (Eventually
tp_compare will also be allowed to return +2, to indicate
NotImplemented; but that can only be implemented once we know all
extensions return a value in [-2...1]. Or perhaps it will require the
type to set a flag bit.)
I haven't decided yet whether to backport this to 2.2.x. The patch
applies fine. But is it fair to start warning in 2.2.2 about code
that worked flawlessly in 2.2.1?
for 'str' and 'unicode', and can be used instead of
types.StringTypes, e.g. to test whether something is "a string":
isinstance(x, string) is True for Unicode and 8-bit strings. This
is an abstract base class and cannot be instantiated directly.
returned a proxy for __class__ whose __bases__ was also a proxy. The
merge_class_dict() helper for dir() assumed incorrectly that __bases__
would always be a tuple and used the in-line tuple API on the proxy.
I will backport this to 2.2 as well.
left and right type were of the same type and not classic instances.
This shortcut is dangerous for proxy types, because it means that
coerce(Proxy(1), Proxy(2.1)) leaves Proxy(1) unchanged rather than
turning it into Proxy(1.0).
In an ever-so-slight change of semantics, I now only take the shortcut
when the left and right types are of the same type and don't have the
CHECKTYPES feature. It so happens that classic instances have this
flag, so the shortcut is still skipped in this case (i.e. nothing
changes for classic instances). Proxies also have this flag set
(otherwise implementing numeric operations on proxies would become
nightmarish) and this means that the shortcut is also skipped there,
as desired. It so happens that int, long and float also have this
flag set; that means that e.g. coerce(1, 1) will now invoke
int_coerce(). This is fine: int_coerce() can deal with this, and I'm
not worried about the performance; int_coerce() is only invoked when
the user explicitly calls coerce(), which should be rarer than rare.
PyMem_{Del, DEL} doesn't work yet (compilation problems).
pyport.h: _PyMem_EXTRA is gone.
pmem.h: Repaired comments. PyMem_{Malloc, MALLOC} and
PyMem_{Realloc, REALLOC} now make the same x-platform guarantees when
asking for 0 bytes, and when passing a NULL pointer to the latter.
object.c: PyMem_{Malloc, Realloc} just call their macro versions
now, since the latter take care of the x-platform 0 and NULL stuff
by themselves now.
pypcre.c, grow_stack(): So sue me. On two lines, this called
PyMem_RESIZE to grow a "const" area. It's not legit to realloc a
const area, so the compiler warned given the new expansion of
PyMem_RESIZE. It would have gotten the same warning before if it
had used PyMem_Resize() instead; the older macro version, but not the
function version, silently cast away the constness. IMO that was a wrong
thing to do, and the docs say the macro versions of PyMem_xyz are
deprecated anyway. If somebody else is resizing const areas with the
macro spelling, they'll get a warning when they recompile now too.
PEP 285. Everything described in the PEP is here, and there is even
some documentation. I had to fix 12 unit tests; all but one of these
were printing Boolean outcomes that changed from 0/1 to False/True.
(The exception is test_unicode.py, which did a type(x) == type(y)
style comparison. I could've fixed that with a single line using
issubtype(x, type(y)), but instead chose to be explicit about those
places where a bool is expected.
Still to do: perhaps more documentation; change standard library
modules to return False/True from predicates.
Also move all _PyMalloc_XXX entry points into obmalloc.c.
The Windows build works fine.
The Unix build is changed here (Makefile.pre.in), but not tested.
No other platform's build process has been fiddled.
platform realloc(p, 0) returns NULL, so MALLOC_ZERO_RETURNS_NULL can
be correctly undefined yet realloc(p, 0) can return NULL anyway.
Prevent realloc(p, 0) doing free(p) and returning NULL via a different
hack. Would probably be better to get rid of MALLOC_ZERO_RETURNS_NULL
entirely.
Bugfix candidate.
Due to the bizarre definition of _PyLong_Copy(), creating an instance
of a subclass of long with a negative value could cause core dumps
later on. Unfortunately it looks like the behavior of _PyLong_Copy()
is quite intentional, so the fix is more work than feels comfortable.
This fix is almost, but not quite, the code that Naofumi Honda added;
in addition, I added a test case.
string object (or a Unicode that's trivially converted to ASCII).
PyObject_GetAttr(): add an 'else' to the Unicode test like
PyObject_SetAttr() already has.
helping for types that defined tp_richcmp but not tp_compare, although
that's when it's most valuable, and strings moved into that category
since the fast path was first introduced. Now it helps for same-type
non-Instance objects that define rich or 3-way compares.
For all the edits here, the rest just amounts to moving the fast path from
do_richcmp into PyObject_RichCompare, saving a layer of function call
(measurable on my box!). This loses when NESTING_LIMIT is exceeded, but I
don't care about that (fast-paths are for normal cases, not pathologies).
Also added a tasteful <wink> label to get out of PyObject_RichCompare, as
the if/else nesting in this routine was getting incomprehensible.
This patch implements what we have discussed on python-dev late in
September: str(obj) and unicode(obj) should behave similar, while
the old behaviour is retained for unicode(obj, encoding, errors).
The patch also adds a new feature with which objects can provide
unicode(obj) with input data: the __unicode__ method. Currently no
new tp_unicode slot is implemented; this is left as option for the
future.
Note that PyUnicode_FromEncodedObject() no longer accepts Unicode
objects as input. The API name already suggests that Unicode
objects do not belong in the list of acceptable objects and the
functionality was only needed because
PyUnicode_FromEncodedObject() was being used directly by
unicode(). The latter was changed in the discussed way:
* unicode(obj) calls PyObject_Unicode()
* unicode(obj, encoding, errors) calls PyUnicode_FromEncodedObject()
One thing left open to discussion is whether to leave the
PyUnicode_FromObject() API as a thin API extension on top of
PyUnicode_FromEncodedObject() or to turn it into a (macro) alias
for PyObject_Unicode() and deprecate it. Doing so would have some
surprising consequences though, e.g. u"abc" + 123 would turn out
as u"abc123"...
[Marc-Andre didn't have time to check this in before the deadline. I
hope this is OK, Marc-Andre! You can still make changes and commit
them on the trunk after the branch has been made, but then please mail
Barry a context diff if you want the change to be merged into the
2.2b1 release branch. GvR]
object.c, PyObject_Str: Don't try to optimize anything except exact
string objects here; in particular, let str subclasses go thru tp_str,
same as non-str objects. This allows overrides of tp_str to take
effect.
stringobject.c:
+ string_print (str's tp_print): If the argument isn't an exact string
object, get one from PyObject_Str.
+ string_str (str's tp_str): Make a genuine-string copy of the object if
it's of a proper str subclass type. str() applied to a str subclass
that doesn't override __str__ ends up here.
test_descr.py: New str_of_str_subclass() test.
This simplifies the rounding in _PyObject_VAR_SIZE, allows to restore the
pre-rounding calling sequence, and allows some nice little simplifications
in its callers. I'm still making it return a size_t, though.
As Guido suggested, this makes the new subclassing code substantially
simpler. But the mechanics of doing it w/ C macro semantics are a mess,
and _PyObject_VAR_SIZE has a new calling sequence now.
Question: The PyObject_NEW_VAR macro appears to be part of the public API.
Regardless of what it expands to, the notion that it has to round up the
memory it allocates is new, and extensions containing the old
PyObject_NEW_VAR macro expansion (which was embedded in the
PyObject_NEW_VAR expansion) won't do this rounding. But the rounding
isn't actually *needed* except for new-style instances with dict pointers
after a variable-length blob of embedded data. So my guess is that we do
not need to bump the API version for this (as the rounding isn't needed
for anything an extension can do unless it's recompiled anyway). What's
your guess?
+ Use the _PyObject_VAR_SIZE macro to compute object size.
+ Break the computation into lines convenient for debugger inspection.
+ Speed the round-up-to-pointer-size computation.
hack, and it's even more disgusting than a PyInstance_Check() call.
If the tp_compare slot is the slot used for overrides in Python,
it's always called.
Add some tests that show what should work too.
and are lists, and then just the string elements (if any)).
There are good and bad reasons for this. The good reason is to support
dir() "like before" on objects of extension types that haven't migrated
to the class introspection API yet. The bad reason is that Python's own
method objects are such a type, and this is the quickest way to get their
im_self etc attrs to "show up" via dir(). It looks much messier to move
them to the new scheme, as their current getattr implementation presents
a view of their attrs that's a untion of their own attrs plus their
im_func's attrs. In particular, methodobject.__dict__ actually returns
methodobject.im_func.__dict__, and if that's important to preserve it
doesn't seem to fit the class introspection model at all.
- use PyModule_Check() instead of PyObject_TypeCheck(), now we can.
- don't assert that the __dict__ gotten out of a module is always
a dictionary; check its type, and raise an exception if it's not.
PEP 238. Changes:
- add a new flag variable Py_DivisionWarningFlag, declared in
pydebug.h, defined in object.c, set in main.c, and used in
{int,long,float,complex}object.c. When this flag is set, the
classic division operator issues a DeprecationWarning message.
- add a new API PyRun_SimpleStringFlags() to match
PyRun_SimpleString(). The main() function calls this so that
commands run with -c can also benefit from -Dnew.
- While I was at it, I changed the usage message in main() somewhat:
alphabetized the options, split it in *four* parts to fit in under
512 bytes (not that I still believe this is necessary -- doc strings
elsewhere are much longer), and perhaps most visibly, don't display
the full list of options on each command line error. Instead, the
full list is only displayed when -h is used, and otherwise a brief
reminder of -h is displayed. When -h is used, write to stdout so
that you can do `python -h | more'.
Notes:
- I don't want to use the -W option to control whether the classic
division warning is issued or not, because the machinery to decide
whether to display the warning or not is very expensive (it involves
calling into the warnings.py module). You can use -Werror to turn
the warnings into exceptions though.
- The -Dnew option doesn't select future division for all of the
program -- only for the __main__ module. I don't know if I'll ever
change this -- it would require changes to the .pyc file magic
number to do it right, and a more global notion of compiler flags.
- You can usefully combine -Dwarn and -Dnew: this gives the __main__
module new division, and warns about classic division everywhere
else.
- Do not compile unicodeobject, unicodectype, and unicodedata if Unicode is disabled
- check for Py_USING_UNICODE in all places that use Unicode functions
- disables unicode literals, and the builtin functions
- add the types.StringTypes list
- remove Unicode literals from most tests.
types -- currently Type, List, None and NotImplemented. To be called
from Py_Initialize() instead of accumulating calls there.
Also rename type(None) to NoneType and type(NotImplemented) to
NotImplementedType -- naming the type identical to the object was
confusing.
returns that. (This fix is also by MvL; checkin it in because I want
to make more changes here. I'm still not 100% satisfied -- see
comments attached to the patch.)
- Add an explicit call to PyType_Ready(&PyList_Type) to pythonrun.c
(just for the heck of it, really -- we should either explicitly
ready all types, or none).
And remove all the extern decls in the middle of .c files.
Apparently, it was excluded from the header file because it is
intended for internal use by the interpreter. It's still intended for
internal use and documented as such in the header file.
case of objects with equal types which support tp_compare. Give
type objects a tp_compare function.
Also add c<0 tests before a few PyErr_Occurred tests.
NEEDS DOC CHANGES
A few more AttributeErrors turned into TypeErrors, but in test_contains
this time.
The full story for instance objects is pretty much unexplainable, because
instance_contains() tries its own flavor of iteration-based containment
testing first, and PySequence_Contains doesn't get a chance at it unless
instance_contains() blows up. A consequence is that
some_complex_number in some_instance
dies with a TypeError unless some_instance.__class__ defines __iter__ but
does not define __getitem__.
the code necessary to accomplish this is simpler and faster if confined to
the object implementations, so we only do this there.
This causes no behaviorial changes beyond a (very slight) speedup.
object's type didn't define tp_print, there were still cases where the
full "print uses str() which falls back to repr()" semantics weren't
honored. This resulted in
>>> print None
<None object at 0x80bd674>
>>> print type(u'')
<type object at 0x80c0a80>
Fixed this by always using the appropriate PyObject_Repr() or
PyObject_Str() call, rather than trying to emulate what they would do.
Also simplified PyObject_Str() to always fall back on PyObject_Repr()
when tp_str is not defined (rather than making an extra check for
instances with a __str__ method). And got rid of the special case for
strings.
Fix a very old flaw in PyObject_Print(). Amazing! When an object
type defines tp_str but not tp_repr, 'print x' to a real file
object would not call the tp_str slot but rather print a default style
representation: <foo object at 0x....>. This even though 'print x' to
a file-like-object would correctly call the tp_str slot.
and the test for errors, so that an error in the default compare
doesn't go undetected. This fixes SF Bug #132933 (submitted by
effbot) -- list.sort doesn't detect comparision errors.
PyObject_Dump(): New function that is useful when debugging Python's C
runtime. In something like gdb it can be a pain to get some useful
information out of PyObject*'s. This function prints the str() of the
object to stderr, along with the object's refcount and hex address.
PyGC_Dump(): Similar to PyObject_Dump() but knows how to cast from the
garbage collector prefix back to the PyObject* structure.
[See Misc/gdbinit for some useful gdb hooks]
none_dealloc(): Rather than SEGV if we accidentally decref None out of
existance, we assign None's and NotImplemented's destructor slot to
this function, which just calls abort().
Barry, that comment belongs in the code, not in the checkin msg.
The code *used* to do this correctly (as you well know, since you
& I went thru considerable pain to fix this the first time).
However, because the *reason* for the convolution wasn't recorded
in the code as a comment, somebody threw it all away the first
time it got reworked.
c-code-isn't-often-self-explanatory-ly y'rs - tim
default_3way_compare(): Stick the checkin message from 2.110 in a
comment.
to integer types (i.e. Py_uintptr_t, our spelling of C9X's uintptr_t).
ANSI specifies that pointer compares other than == and != to
non-related structures are undefined. This quiets an Insure
portability warning.
I found where rich comparison of unequal recursive objects gave
unintuituve results. In a discussion with Tim, where we discovered
that our intuition on when a<=b should be true was failing, we decided
to outlaw ordering comparisons on recursive objects. (Once we have
fixed our intuition and designed a matching algorithm that's practical
and reasonable to implement, we can allow such orderings again.)
- Refactored the recursive-object comparison framework; more is now
done in the support routines so less needs to be done in the calling
routines (even at the expense of slowing it down a bit -- this
should normally never be invoked, it's mostly just there to avoid
blowing up the interpreter).
- Changed the framework so that the comparison operator used is also
stored. (The dictionary now stores triples (v, w, op) instead of
pairs (v, w).)
- Changed the nesting limit to a more reasonable small 20; this only
slows down comparisons of very deeply nested objects (unlikely to
occur in practice), while speeding up comparisons of recursive
objects (previously, this would first waste time and space on 500
nested comparisons before it would start detecting recursion).
- Changed rich comparisons for recursive objects to raise a ValueError
exception when recursion is detected for ordering oprators (<, <=,
>, >=).
Unrelated change:
- Moved PyObject_Unicode() to just under PyObject_Str(), where it
belongs. MAL's patch must've inserted in a random spot between two
functions in the file -- between two helpers for rich comparison...
- Use the compare nesting level and in-progress dictionary properly in
PyObject_RichCompare().
- Change the in-progress code to use static variables instead of
globals (both the nesting level and the key for the thread dict were
globals but have no reason to be globals; the key can even be a
function-static variable in get_inprogress_dict()).
- Rewrote try_rich_to_3way_compare() to benefit from the similarity of
the three cases, making it table-driven.
- In try_rich_to_3way_compare(), test for EQ before LT and GT. This
turns out essential when comparing recursive UserList instances;
with the old code, these would recurse into rich comparison three
times for each nesting level up to NESTING_LIMIT/2, making the total
number of calls in the order of 3**(NESTING_LIMIT/2)!
NOTE: I'm not 100% comfortable with this. It works for the standard
test suite (which compares a few trivial recursive data structures
only), but I'm not sure that the in-progress dictionary is used
properly by the rich comparison code. Jeremy suggested that maybe the
operation should be included in the dict. Currently I presume that
objects in the dict are equal unless proven otherwise, and I set the
outcome for the rich comparison accordingly: true for operators EQ,
LE, GE, and false for the other three. But Jeremy seems to think that
there may be counter-examples where this doesn't do the right thing.
except that it always returns Unicode objects.
A new C API PyObject_Unicode() is also provided.
This closes patch #101664.
Written by Marc-Andre Lemburg. Copyright assigned to Guido van Rossum.
PyObject_RichCompare() and PyObject_RichCompareBool().
XXX Note: the code that checks for deeply nested rich comparisons is
bogus -- it assumes the two objects are always identical, rather than
using the same logic as PyObject_Compare(). I'll fix that later.
Add definitions of INT_MAX and LONG_MAX to pyport.h.
Remove includes of limits.h and conditional definitions of INT_MAX
and LONG_MAX elsewhere.
This closes SourceForge patch #101659 and bug #115323.
objects for the attribute name. Unicode objects are converted to
a string using the default encoding before trying the lookup.
Note that previously it was allowed to pass arbitrary objects as
attribute name in case the tp_getattro/setattro slots were defined.
This patch fixes this by applying an explicit string check first:
all uses of these slots expect string objects and do not check
for the type resulting in a core dump. The tp_getattro/setattro
are still useful as optimization for lookups using interned
string objects though.
This patch fixes bug #113829.
types (i.e. Py_uintptr_t, our spelling of C9X's uintptr_t). ANSI
specifies that pointer compares other than == and != to non-related
structures are undefined. This quiets an Insure portability warning.
This was a misleading bug -- the true "bug" was that hash(x) gave an error
return when x is an infinity. Fixed that. Added new Py_IS_INFINITY macro to
pyport.h. Rearranged code to reduce growing duplication in hashing of float and
complex numbers, pushing Trent's earlier stab at that to a logical conclusion.
Fixed exceedingly rare bug where hashing of floats could return -1 even if there
wasn't an error (didn't waste time trying to construct a test case, it was simply
obvious from the code that it *could* happen). Improved complex hash so that
hash(complex(x, y)) doesn't systematically equal hash(complex(y, x)) anymore.
comments, docstrings or error messages. I fixed two minor things in
test_winreg.py ("didn't" -> "Didn't" and "Didnt" -> "Didn't").
There is a minor style issue involved: Guido seems to have preferred English
grammar (behaviour, honour) in a couple places. This patch changes that to
American, which is the more prominent style in the source. I prefer English
myself, so if English is preferred, I'd be happy to supply a patch myself ;)
The common technique for printing out a pointer has been to cast to a long
and use the "%lx" printf modifier. This is incorrect on Win64 where casting
to a long truncates the pointer. The "%p" formatter should be used instead.
The problem as stated by Tim:
> Unfortunately, the C committee refused to define what %p conversion "looks
> like" -- they explicitly allowed it to be implementation-defined. Older
> versions of Microsoft C even stuck a colon in the middle of the address (in
> the days of segment+offset addressing)!
The result is that the hex value of a pointer will maybe/maybe not have a 0x
prepended to it.
Notes on the patch:
There are two main classes of changes:
- in the various repr() functions that print out pointers
- debugging printf's in the various thread_*.h files (these are why the
patch is large)
Closes SourceForge patch #100505.
errors in some of the hash algorithms. For exmaple, in float_hash and
complex_hash a certain part of the value is not included in the hash
calculation. See Tim's, Guido's, and my discussion of this on
python-dev in May under the title "fix float_hash and complex_hash for
64-bit *nix"
(2) The hash algorithms that use pointers (e.g. func_hash, code_hash)
are universally not correct on Win64 (they assume that sizeof(long) ==
sizeof(void*))
As well, this patch significantly cleans up the hash code. It adds the
two function _Py_HashDouble and _PyHash_VoidPtr that the various
hashing routine are changed to use.
These help maintain the hash function invariant: (a==b) =>
(hash(a)==hash(b))) I have added Lib/test/test_hash.py and
Lib/test/output/test_hash to test this for some cases.
For more comments, read the patches@python.org archives.
For documentation read the comments in mymalloc.h and objimpl.h.
(This is not exactly what Vladimir posted to the patches list; I've
made a few changes, and Vladimir sent me a fix in private email for a
problem that only occurs in debug mode. I'm also holding back on his
change to main.c, which seems unnecessary to me.)
Improvements:
- does no longer need any extra memory
- has no relationship to tstate
- works in debug mode
- can easily be modified for free threading (hi Greg:)
Side effects:
Trashcan does change the order of object destruction.
Prevending that would be quite an immense effort, as
my attempts have shown. This version works always
the same, with debug mode or not. The slightly
changed destruction order should therefore be no problem.
Algorithm:
While the old idea of delaying the destruction of some
obejcts at a certain recursion level was kept, we now
no longer aloocate an object to hold these objects.
The delayed objects are instead chained together
via their ob_type field. The type is encoded via
ob_refcnt. When it comes to the destruction of the
chain of waiting objects, the topmost object is popped
off the chain and revived with type and refcount 1,
then it gets a normal Py_DECREF.
I am confident that this solution is near optimum
for minimizing side effects and code bloat.
Added wrapping macros to dictobject.c, listobject.c, tupleobject.c,
frameobject.c, traceback.c that safely prevends core dumps
on stack overflow. Macros and functions in object.c, object.h.
The method is an "elevator destructor" that turns cascading
deletes into tail recursive behavior when some limit is hit.
before calling it. This check was there when the objects were of the
same type *before* coercion, but not if they initially differed but
became the same *after* coercion.
PyNumber_Coerce() except that when the coercion can't be done and no
other exceptions happen, it returns 1 instead of raising an
exception.
Use this function in PyObject_Compare() to avoid raising an exception
simply because two objects with numeric behavior can't be coerced to a
common type; instead, proceed with the non-numeric default comparison.
Note that this is a somewhat questionable practice -- comparisons for
numeric objects shouldn't default to random behavior like this, but it
is required for backward compatibility. (Case in point, it broke
comparison of kjDict objects to integers in Aaron Watters' kjbuckets
extension.) A correct fix (for python 2.0) should involve a different
definiton of comparison altogether.
In _Py_PrintReferences(), no longer suppress once-referenced string.
Add Py_Malloc and friends and PyMem_Malloc and friends (malloc
wrappers for third parties).
getcounts() returns a list of counts of allocations and
deallocations for all different object types.
getobjects(n [, type ]) returns a list of recently allocated
and not-yet-freed objects of the given type (all
objects if no type given). Only the n most recent
(all if n==0) objects are returned.
getcounts is only available if compiled with -DCOUNT_ALLOCS,
getobjects is only available if compiled with -DTRACE_REFS. Note that
everything must be compiled with these options!
Tim Peters
Neal Norwitz
Guido van Rossum
Neil Schemenauer
Martin v. Löwis
Jeremy Hylton
Fred Drake
Barry Warsaw
Marc-André Lemburg
Jack Jansen
Andrew M. Kuchling
Vladimir Marangozov
Moshe Zadka
Peter Schneider-Kamp
Thomas Wouters
Fredrik Lundh
Skip Montanaro
Sjoerd Mullender