scripts without modifying either the distutils installation or the
setup.py scripts of packages with which the new commands will be used.
Specifically, an option is added to distutils that allows additional
packages to be searched for command implementations in addition to
distutils.command. The additional packages can be specified on the
command line or via the installation or personal configuration files
already loaded by distutils.
For discussion, see the thread starting with:
http://mail.python.org/pipermail/distutils-sig/2004-August/004112.html
This closes SF patch #102241.
Patch from Mark Hammond:
bdist_wininst attempts to use the correct MSVC runtime for the current
version of Python. This doesn't work correctly when --target-version
is set. In that case, bdist_wininst still uses the *current*
sys.version (ie, 2.4) rather than the version specified as
--target-version. Thus, the msvc7 runtime based executable stub is
*always* used.
This patch "hard-codes" knowledge of earlier Python versions,
providing the correct result when Python 2.4 is used to build Python
2.3 and earlier distributions.
Remove the short variant (-v) of the --target-version command line
options, it conflicts with the --verbose/-v standard distutils switch.
This is basically the support for package data from Phillip Eby's
setuptools package. I've changed it only to fit it into the core
implementation rather than to live in subclasses, and added
documentation.
of hard linking against the framework).
If $MACOSX_DEPLOYMENT_TARGET is set, and >= 10.3, during configure we
setup extensions to link with dynamic lookup. We also record the
value in the Makefile.
Distutils checks whether a value for MACOSX_DEPLOYMENT_TARGET was
recorded in the Makefile, and if it was insists that the current
value matches.
This is only a partial fix because it only applies to 2.4, and the
"two python problem" exists with Python 2.3 shipped with MacOSX 10.3,
which we have no influence over.
requires and provides. requires is a sequence of strings, of the
form 'packagename-version'. The dependency checking so far merely
does an '__import__(packagename)' and checks for packagename.__version__
You can also leave off the version, and any version of the package
will be installed.
There's a special case for the package 'python' - sys.version_info
is used, so
requires= ( 'python-2.3', )
just works.
Provides is of the same format as requires - but if it's not supplied,
a provides is generated by adding the version to each entry in packages,
or modules if packages isn't there.
Provides is currently only used in the PKG-INFO file. Shortly, PyPI
will grow the ability to accept these lines, and register will be
updated to send them.
There's a new command 'checkdep' command that runs these checks.
For this version, only greater-than-or-equal checking is done. We'll
add the ability to specify an optional operator later.
msvccompiler.get_build_version().
Distributions without a pre-install-script didn't work any longer, we
must at least provide the terminating NUL character.
included in Python distributions for systems other than Windows.
Windows installers can be build on non-Windows systems as long as they
only include pure python module distributions.
Patch #892660 from Mark Hammond, for distutils bdist_wininst command.
install.c: support for a 'pre-install-script', run before anything has
been installed. Provides a 'message_box' module function for use by
either the pre-install or post-install scripts.
bdist_wininst.py: support for pre-install script. Typo (build->built),
fixes so that --target-version can still work, even when the
distribution has extension modules - in this case, we insist on
--skip-build, as we still can't actually build other versions.
install.c: support for a 'pre-install-script', run before anything has
been installed. Provides a 'message_box' module function for use by
either the pre-install or post-install scripts.
bdist_wininst.py: support for pre-install script. Typo (build->built),
fixes so that --target-version can still work, even when the
distribution has extension modules - in this case, we insist on
--skip-build, as we still can't actually build other versions.
Use case: Sometimes 'compiling' source files (with SWIG, for example)
creates additionl files which included by later sources. The win32all
setup script requires this.
There is no SF item for this, but it was discussed on distutils-sig:
http://mail.python.org/pipermail/distutils-sig/2003-November/003514.html
distutils now looks for the compiler version in sys.version, falling
back to MSVC 6 if the version isn't listed (Python 2.2 and lower).
Add helper routines for reading the registry. Refactor many
module functions into methods of the compiler to avoid passing
lots of state as arguments.
On cygwin, the setup.py script uses unixccompiler.py for compiling and linking
C extensions. The unixccompiler.py script assumes that executables do not get
special extensions, which makes sense for Unix. However, on Cygwin,
executables get an .exe extension.
This causes a problem during the configuration step (python setup.py config),
in which some temporary executables may be generated. As unixccompiler.py does
not know about the .exe extension, distutils fails to clean up after itself: it
does not remove _configtest.exe but tries to remove _configtest instead.
The attached patch to unixccompiler.py sets the correct exe_extension for
cygwin by checking if sys.platform is 'cygwin'. With this patch, distutils
cleans up after itself correctly.
Michiel de Hoon
University of Tokyo, Human Genome Center.
After some more reflection (and no negative feedback), I am reverting the
original patch and applying my version, cygwinccompiler.py-shared.diff,
instead.
My reasons are the following:
1. support for older toolchains is retained
2. support for new toolchains (i.e., ld -shared) is added
The goal of my approach is to avoid breaking older toolchains while adding
better support for newer ones.
The cygwinccompiler.get_versions() function only handles versions numbers of
the form "x.y.z". The attached patch enhances get_versions() to handle "x.y"
too (i.e., the ".z" is optional).
This change causes the unnecessary "--entry _DllMain@12" link option to be
suppressed for recent Cygwin and Mingw toolchains. Additionally, it directs
recent Mingw toolchains to use gcc instead of dllwrap during linking.
Currently, the cygwinccompiler.py compiler handling in
distutils is invoking the cygwin and mingw compilers
with the -static option.
Logically, this means that the linker should choose to
link to static libraries instead of shared/dynamically
linked libraries.
Current win32 binutils expect import libraries to have
a .dll.a suffix and static libraries to have .a suffix.
If -static is passed, it will skip the .dll.a
libraries. This is pain if one has a tree with both
static and dynamic libraries using this naming
convention, and wish to use the dynamic libraries.
The -static option being passed in distutils is to get
around a bug in old versions of binutils where it would
get confused when it found the DLLs themselves.
The decision to use static or shared libraries is site
or package specific, and should be left to the setup
script or to command line options.
specified with an absolute path, the object file is also
written to an absolute path. The patch drops the drive and
leading '/' from the source path, so a path like /path/to/foo.c
results in an object file like build/temp.i686linux/path/to/foo.o.
bdist_wininst.py we will see.)
Removed the base64 encoded binary contents, wininst.exe must be in the
same directory as this file now.
wininst.exe must be recompiled and commited each time the sources in
PC/bdist_wininst are changed.
Previously archive_util.py attempted to spawn an
external 'zip' program for the zip action, if this fails, an
attempt to import zipfile.py is made...
This bites folks who have 'old' or non-conforming zip
programs on windows platforms. This change tries the 'zipfile'
module first, falling back to spawning a zip process if
the module isn't available.
If you have source files srcdir1/foo.c and srcdir2/foo.c, the
temporary .o for both files is written to build/temp.<platform>/foo.o.
This patch sets strip_dir to false for both calls to object_filename,
so now the object files are written to temp.<platform>/srcdir1/foo.o
and .../srcdir2/foo.o.
2.2 bugfix candidate
The two long lines have been reflowed differently; hopefully someone on
BeOS can test them. Rev. 1.53 also converted string.atoi() to int(); I've
left that alone.
Fixed by catching all exceptions that are subclasses of DistutilsError,
so only the error message will be printed. You can still get the
whole traceback by enabling the Distutils debugging mode.
always available on Windows NT. When the function cannot be loaded,
get_special_folder_path raises OSError, "function not available".
Compiled the exe, and rebuilt bdist_wininst.py.
* Lib/distutils/command/bdist_rpm.py
(bdist_rpm.initialize_options): Included verify_script attribute.
(bdist_rpm.finalize_package_data): Ensure that verify_script is a filename.
(bdist_rpm._make_spec_file): Included verify_script in script_options
tuple.
* Misc/NEWS
Mention change.
[#413582] g++ must be called for c++ extensions
[#454030] distutils cannot link C++ code with GCC
topdir = "Lib/distutils"
* bcppcompiler.py
(BCPPCompiler.create_static_lib): Fixed prototype, removing extra_preargs
and extra_postargs parameters. Included target_lang parameter.
(BCPPCompiler.link): Included target_lang parameter.
* msvccompiler.py
(MSVCCompiler.create_static_lib): Fixed prototype, removing extra_preargs
and extra_postargs parameters. Included target_lang parameter.
(MSVCCompiler.link): Included target_lang parameter.
* ccompiler.py
(CCompiler): New language_map and language_order attributes, used by
CCompiler.detect_language().
(CCompiler.detect_language): New method, will return the language of
a given source, or list of sources. Individual source language is
detected using the language_map dict. When mixed sources are used,
language_order will stablish the language precedence.
(CCompiler.create_static_lib, CCompiler.link, CCompiler.link_executable,
CCompiler.link_shared_object, CCompiler.link_shared_lib):
Inlcuded target_lang parameter.
* cygwinccompiler.py
(CygwinCCompiler.link): Included target_lang parameter.
* emxccompiler.py
(EMXCCompiler.link): Included target_lang parameter.
* mwerkscompiler.py
(MWerksCompiler.link): Included target_lang parameter.
* extension.py
(Extension.__init__): New 'language' parameter/attribute, initialized
to None by default. If provided will overlap the automatic detection
made by CCompiler.detect_language(), in build_ext command.
* sysconfig.py
(customize_compiler): Check Makefile for CXX option, and also the
environment variable CXX. Use the resulting value in the 'compiler_cxx'
parameter of compiler.set_executables().
* unixccompiler.py
(UnixCCompiler): Included 'compiler_cxx' in executables dict, defaulting
to 'cc'.
(UnixCCompiler.create_static_lib): Included target_lang parameter.
(UnixCCompiler.link): Included target_lang parameter, and made
linker command use compiler_cxx, if target_lang is 'c++'.
* command/build_ext.py
(build_ext.build_extension): Pass new ext.language attribute
to compiler.link_shared_object()'s target_lang parameter. If
ext.language is not provided, detect language using
compiler.detect_language(sources) instead.
* command/config.py
(config._link): Pass already available lang parameter as target_lang
parameter of compiler.link_executable().
customize_compiler() now looks at various environment variables and uses
their values to override the configured C compiler/preprocessor/linker
binary and flags.
whether the Distutils being used supports a particularly capability.
(This idea was originally suggested by Juergen Hermann as a method
on the Distribution class. I think it makes more sense as a
function in core.py, and that's what this patch implements.)
arguments, triggering a warning instead of raising an exception. (In
1.5.2/2.0, it will print to stderr.)
Bugfix candidate for all previous versions. This changes behaviour,
but the old behaviour wasn't very useful. If Distutils version X+1
adds a new keyword argument, using the new keyword means your setup.py
file won't work with Distutils version X any more.
Strangely, two out of three patches there seem already committed; but
the essential one (get rid of the assert in object_filenames in
ccompiler.py) was not yet applied.
This makes the build procedure for Twisted work again.
This is *not* a backport candidate despite the fact that identical
code appears to exist in 2.2.2; Twisted builds fine there, so there
must have been a change elsewhere.
The default implementation calls _compile() to compile individual
files. This method must be implemented by the subclass. This change
factors out most of the remaining common code in all the compilers
except mwerks.
Two new tests are needed:
Don't skip building an extension if any of the depends files are newer
than the target.
Pass ext.depends to compiler.compile() so that it can track individual
files.
Always use _setup_compile() to do the grunt work of processing
arguments, figuring out which files to compile, and emitting debug
messages for files that are up-to-date.
Use _get_cc_args() when possible.
This change is not backwards compatible. If a compiler subclass
exists outside the distutils package, it may get called with the
unexpected keyword arg. It's easy to extend that compiler by having
it ignore the argument, and not much harder to do the right thing. If
this ends up being burdensome, we can change it before 2.3 final to
work harder at compatibility.
Also add _setup_compile() and _get_cc_args() helper functions that
factor out much of the boilerplate for each concrete compiler class.
Remove __init__ that just called base class __init__ with same args.
Fold long argument lists into fewer, shorter lines.
Remove parens in tuple unpacks.
Don't put multiple statements on one line with a semicolon.
In find_library_file() compute the library_filename() upfront.
This is a conservative version of SF patch 504889. It uses the log
module instead of calling print in various places, and it ignores the
verbose argument passed to many functions and set as an attribute on
some objects. Instead, it uses the verbosity set on the logger via
the command line.
The log module is now preferred over announce() and warn() methods
that exist only for backwards compatibility.
XXX This checkin changes a lot of modules that have no test suite and
aren't exercised by the Python build process. It will need
substantial testing.
# XXX this isn't used anywhere, and worse, it has the same name as a method
# in Command with subtly different semantics. (This one just has one
# source -> one dest; that one has many sources -> one dest.) Nuke it?
Yes. Nuke it.
modules, distutils does not understand that the build version of the
source tree is needed.
This patch fixes distutils.sysconfig to understand that the running
Python is part of the build tree and needs to use the appropriate
"shape" of the tree. This does not assume anything about the current
directory, so can be used to build 3rd-party modules using Python's
build tree as well.
This is useful since it allows us to use a non-installed debug-mode
Python with 3rd-party modules for testing. It as the side-effect that
set_python_build() is no longer needed (the hack which was added to
allow distutils to be used to build the "standard" extension modules).
This closes SF patch #547734.
--install-script ... command line option to bdist_wininst) at the end
of the installation and at the start of deinstallation. Output
(stdout, stderr) of the script (if any) is displayed in the last
screen at installation, or in a simple message box at deinstallation.
sys.argv[1] for the script will contain '-install' at installation
time or '-remove' at deinstallation time.
The installation script runs in an environment (embedded by the
bdist_wininst runtime) where an additional function is available as
builtin:
create_shortcut(path, description, filename,
[arguments[, workdir[, iconpath, iconindex]]])
Recreated this file after source changes.
installations are present, by always unlinking the destination file
before copying to it. Without the unlink(), the copied file remains
owned by its previous UID, causing the subsequent chmod() to fail.
Bugfix candidate, though it may cause changes on platforms where
file ownership behaves differently.
contain the type of the file (regular file, socket, link, &c.).
This means that install_scripts will now print
"changing mode of <file> to 775" instead of "... to 100775".
2.2 bugfix candidate, I suppose, though this isn't actually fixing a bug.
present - at least the swigged file should be named <name>_wrap.c as
this is also SWIG's default. (Even better would be to generate the
wrapped sources in a different location, but I'll leave this for
later).
Newer versions of SWIG don't accept the -dnone flag any more.
Since virtually nobody uses SWIG with distutils, this should do no
harm.
Suggested be Martin Bless on c.l.p.
crashes.
If no external zip-utility is found, the archive is created by the
zipfile module, which behaves different now than in 2.1: if the
zip-file is created in the root directory if the distribution, it will
contain an (empty) version of itself.
This triggered the above bug - so it's better to create the zip-file
far away in the TMP directory.
>
> When using 'distutils' (shipped with Python 2.1) I've found that my
> Python scripts installed with a first line of:
>
> #!/usr/bin/python2.1None
>
> This is caused by distutils trying to patch the first line of the python
> script to use the current interpreter.
distutils for the library modules built as shared objects. A better solution
appears possible, but with the threat that the distutils becomes more
magical ("complex").
This closes SF bug #458343.
bdist_wininst doesn't use the NT SCHEME any more, instead
a custom SCHEME is used, which is exchanged at installation
time, depending on the python version used.
Avoid a bogus warning frpom install_lib about installing
into a directory not on sys.path.
modules and extensions on Windows is now $PREFIX/Lib/site-packages.
Includes backwards compatibility code for pre-2.2 Pythons. Contributed
by Paul Moore.
libraries. This is done by adding a .get_source_files() method,
contributed by Rene Liebscher and slightly modified.
Remove an unused local variable spotted by PyChecker
though 'licence' is still supported for backward-compatibility
(Should I add a warning to get_licence(), or not bother?)
Also fixes an UnboundLocalError noticed by PyChecker
to the current Python interpreter (ie. the one used for
building/installation), even (especially!) if "/usr/bin/env" appears in
the #! line.
Rationale: installing scripts with "#!/usr/bin/env python" is asking for
trouble, because
1) it might pick the wrong interpreter (not the one used to
build/install the script)
2) it doesn't work on all platforms (try it on IRIX 5, or on Linux
with command-line options for python)
3) "env" might not be in /usr/bin
- compile() didn't return a (empty) list of objects. Fixed.
- the various _fix_xxx_args() methods weren't called (are they new or did I overlook them?). Fixed.
along with options to print them.
Add a finalize_options() method to Distribution to do final processing
on the platform and keyword attributes
Add DistributionMetadata.write_pkg_info() method to write a PKG-INFO file
into the release tree.
before this get forgotten again.
Should probably be set to 1.0.2 before final release of python 2.1
Does someone still release distutils separate from python?
has been changed to include an uninstaller.
I forgot to mention in the uninstaller checkin that the logfile
name (used for uninstalling) has been changed from
<module>.log to <module>-wininst.log. This should prevent
conflicts with a distutils logfile serving the same purpose.
The short form of the --bdist-dir (-d) option has been removed
because it caused conflicts with the short form of the --dist-dir
option.
the Cygwin-specific compiler class.
(According to Jason Tishler, cygwinccompiler needs some work to
handle the differences in Cygwin- and MSVC-Python. Makefile and
config files are currently ignored by cygwinccompiler, as it was
written to support cygwin for extensions which are intended to be
used with the standard MSVC built Python.)
--bitmap command line option allows to use a different bitmap file instead
of the build-in python powered logo.
--title lets you specify the text to display on the background.
The editbox in the first screen now longer is
selected (highlighted), it had the WS_TABSTOP flag.
This is the patch
http://sourceforge.net/patch/?func=detailpatch&patch_id=103687&group_id=5470
with two changes:
1. No messagebox displayed when the compilation to .pyc or .pyo files
failes, this will only confuse the user (and it will fail under certain
cases, where sys.path contains garbage).
2. A debugging print statement was removed from bdist_wininst.py.
and also takes the sys.platform name into account. This helps on
platforms where there are multiple possible compiler backends (the
one with which Python itself was compiled is preferred over others
in this case).
The patch uses this new technique to enable using cygwin compiler
per default for cygwin compiled Pythons.
Written by Marc-Andre Lemburg. Copyright assigned to Guido van Rossum.
prevent binding for str from masking use of builtin str in nested
function.
(This is the only case I found in the standard library where a local
shadows a global or builtin. There may be others, but the regression
test doesn't catch them.)
Lib/distutils/command/build_ext.py(build_ext.finalize_options): Add
Cygwin specific code to append Python's library directory to the
extension's list of library directories.
(build_ext.get_libraries): Add Cygwin specific code to append Python's
(import) library to the extension's list of libraries.
This patch adds support for Cygwin to util.get_platform(). A Cygwin
specific case is needed due to the format of Cygwin's uname command,
which contains '/' characters.
sys.prefix + 'config/Makefile'. When building Python for the first
time, these files aren't there, so the files from the build tree have
to be used instead; this file adds an entry point for specifying that
the build tree files should be used. (Perhaps 'set_python_build' should
should be preceded with an underscore?)
for done[n] can be integers as well as strings, but the code
concatenates them with strings (fixed by adding a str()) and calls
string.strip() on them (fixed by rearranging the logic)
(Presumably this wasn't noticed previously because parse_makefile()
was only called on Modules/Makefile, which contains no integer-valued
variables.)
produce a list of unique filenames:
"While attempting to build an RPM using distutils on Python 2.0,
rpm complained about duplicate files. The following patch fixed
that problem.
about how it would be nice to write absolute paths to the temporary
byte-compilation script, but this doesn't work because it screws up the
trailing-slash trickery done to 'prefix' in build_py's 'byte_compile()'
method.
Fixed to use 'execute()' instead of 'os.remove()' to remove the temporary
script: now it doesn't blow up in dry-run mode!
by default (since compiling at install time works just fine). Details:
- added 'compile' and 'optimize' options
- added 'byte_compile()' method
- changed 'get_outputs()' so it includes bytecode files
A lot of the code added is very similar to code in install_lib.py;
would be nice to factor it out further.
choice between (compile, no-compile) * (optimize=0, optimize=1,
optimize=2). Details:
- added --no-compile option to complement --compile, which has
been there for ages
- changed --optimize (which never worked) to a value option, which
expects 0, 1, or 2
- renamed 'bytecompile()' method to 'byte_compile()', and beefed
it up to handle both 'compile' and 'optimize' options
- fix '_bytecode_filenames()' to respect the new options
standard 'py_compile.compile()' function. Laundry list of features:
- handles standard Distutils 'force', 'verbose', 'dry_run' flags
- handles various levels of optimization: can compile directly in
this interpreter process, or write a temporary script that is
then executed by a new interpreter with the appropriate flags
- can rewrite the source filename by stripping an optional prefix
and preprending an optional base dir.
- added 'sub_commands' class attr
- added 'has_*()' predicates referenced by the sub-command list
- rewrote 'run()' so it's a trivial loop over relevant sub-commands
They are unneeded: All this stuff is already done by the
install command which is run by bdist_wininst.
One bug has been fixed:
The root of the fake install tree is install.install_purelib,
not install.install_lib!
They are different if the extra_path option is used in
the setup function.
Rebuild after the changes to wininst.exe.
Removed get_ext_libname() because it is unused.
Fixed get_libraries() to append an '_d' to the python debug
import library. If MSVC is used, do not add 'pythonxx.lib' to
the list of libraries, because this is handled better
by a pragma in config.h.
This should fix bug #115595, but it needs some more testing.
implementations. Details:
* replace 'link_shared_object()', 'link_shared_lib()', and
'link_executable()' with 'link()', which is (roughly)
the union of the three methods it replaces
* in all implementation classes (UnixCCompiler, MSVCCompiler, etc.),
ditch the old 'link_*()' methods and replace them with 'link()'
* in the abstract base class (CCompiler), add the old 'link_*()'
methods as wrappers around the new 'link()' (they also print
a warning of the deprecated interface)
Also increases consistency between MSVCCompiler and BCPPCompiler,
hopefully to make it easier to factor out the mythical WindowsCCompiler
class. Details:
* use 'self.linker' instead of 'self.link'
* add ability to compile resource files to BCPPCompiler
* added (redundant?) 'object_filename()' method to BCPPCompiler
* only generate a .def file if 'export_symbols' defined
* options can now be spelled "foo-bar" or "foo_bar" (handled in
'parse_config_files()', just after we parse a file)
* added a "[global]" section so there's a place to set global
options like verbose/quiet and dry-run
* respect the "negative alias" dictionary so (eg.) "quiet=1" is
the same as "verbose=0" (this had to be done twice: once in
'parse_config_file()' for global options, and once in
'_set_command_options()' for per-command options)
* the other half of handling boolean options correctly: allow
commands to list their boolean options in a 'boolean_options'
class attribute, and use it to translate strings (like "yes", "1",
"no", "0", etc) to true or false
'convert_paths()' method to convert them all to the local syntax (backslash
or colon or whatever) at the appropriate time.
Added SCHEME_KEYS to get rid of one hard-coded list of attributes (in
'select_scheme()').
Default 'install_path_file' to true, and never set it false (it's just
there in case some outsider somewhere wants to disable installation of the
.pth file for whatever reason).
Toned down the warning emitted when 'install_path_file' is false, since we
no longer know why it might be false.
Added 'warn_dir' flag to suppress warning when installing to a directory
not in sys.path (again, we never set this false -- it's there for outsiders
to use, specifically the "bdist_*" commands).
Pulled the loop of 'change_root()' calls out to new method 'change_roots()'.
Comment updates/deletions/additions.
resource files. The gist of the patch is to treat ".rc" and ".mc"
files as source files; ".mc" files are compiled to ".rc" and then
".res", and ".rc" files are compiled to ".res". Wish I knew what
all these things stood for...
in a string (gives you something to do with the dictionary returned
by 'parse_makefile()').
Pulled the regexes in 'parse_makefile()' out -- they're now globals,
as 'expand_makefile_vars()' needs (two of) them.
Cosmetic tweaks to 'parse_makefile()'.
easier for people porting Makefile.pre.in-based extensions to Distutils.
Also loosened argument-checking in Extension constructor to make life
easier for 'read_setup_file()'.
are completely skipped, rather than being treated as blank lines
(and then subject to the 'skip_blanks' flag). This allows us
to process old-style Setup files, which rely on
hello \\
# boo!
there
coming out as "hello there".
Dropped the 'collapse_ws' option and replaced it with 'collapse_join' --
it's *much* faster (no 're.sub()') and this is the reason I really added
'collapse_ws', ie. to remove leading whitespace from a line being joined
to the previous line.
(eg. "bdist_dumb", to generate both ZIP and tar archives in the same
run), tell all but the last run to keep temp files -- this just gets
rid of the need to pseudo-install the same files multiple times.
Martin v. Löwis
Thomas Heller
Tim Peters
Fred Drake
Sjoerd Mullender
Anthony Baxter
Hye-Shik Chang
Jack Jansen
Walter Dörwald
Andrew MacIntyre
Jeremy Hylton
Gustavo Niemeyer
Marc-André Lemburg
Skip Montanaro
Jason Tishler
Andrew M. Kuchling
Guido van Rossum
Just van Rossum
Neal Norwitz
Michael W. Hudson
Barry Warsaw
Neil Schemenauer
Greg Ward
unknown
Ka-Ping Yee
Eric S. Raymond