bpo-37834: Normalise handling of reparse points on Windows
* ntpath.realpath() and nt.stat() will traverse all supported reparse points (previously was mixed)
* nt.lstat() will let the OS traverse reparse points that are not name surrogates (previously would not traverse any reparse point)
* nt.[l]stat() will only set S_IFLNK for symlinks (previous behaviour)
* nt.readlink() will read destinations for symlinks and junction points only
bpo-1311: os.path.exists('nul') now returns True on Windows
* nt.stat('nul').st_mode is now S_IFCHR (previously was an error)
Fix codecs.lookup() to normalize the encoding name the same way
than encodings.normalize_encoding(), except that codecs.lookup()
also converts the name to lower case.
The faulthandler module no longer allocates its alternative stack at
Python startup. Now the stack is only allocated at the first
faulthandler usage.
faulthandler no longer ignores memory allocation failure when
allocating the stack. sigaltstack() failure now raises an OSError
exception, rather than being ignored.
The alternative stack is no longer used if sigaction() is
not available. In practice, sigaltstack() should only be available
when sigaction() is avaialble, so this change should have no effect
in practice.
faulthandler.dump_traceback_later() internal locks are now only
allocated at the first dump_traceback_later() call, rather than
always being allocated at Python startup.
* Write a message when killing a worker process
* Put a timeout on the second popen.communicate() call
(after killing the process)
* Put a timeout on popen.wait() call
* Catch popen.kill() and popen.wait() exceptions
There are plenty of legitimate scripts in the tree that begin with a
`#!`, but also a few that seem to be marked executable by mistake.
Found them with this command -- it gets executable files known to Git,
filters to the ones that don't start with a `#!`, and then unmarks
them as executable:
$ git ls-files --stage \
| perl -lane 'print $F[3] if (!/^100644/)' \
| while read f; do
head -c2 "$f" | grep -qxF '#!' \
|| chmod a-x "$f"; \
done
Looking at the list by hand confirms that we didn't sweep up any
files that should have the executable bit after all. In particular
* The `.psd` files are images from Photoshop.
* The `.bat` files sure look like things that can be run.
But we have lots of other `.bat` files, and they don't have
this bit set, so it must not be needed for them.
Automerge-Triggered-By: @benjaminp
The fact that keyword names are strings is now part of the vectorcall and `METH_FASTCALL` protocols. The biggest concrete change is that `_PyStack_UnpackDict` now checks that and raises `TypeError` if not.
CC @markshannon @vstinner
https://bugs.python.org/issue37540
Base PR for other PRs that want to play with `type.__call__` such as #13930 and #14589.
The author is really @markshannon I just made the PR.
https://bugs.python.org/issue37207
Automerge-Triggered-By: @encukou
faulthandler now allocates a dedicated stack of SIGSTKSZ*2 bytes,
instead of just SIGSTKSZ bytes. Calling the previous signal handler
in faulthandler signal handler uses more than SIGSTKSZ bytes of stack
memory on some platforms.
FreeBSD implementation of poll(2) restricts the timeout argument to be
either zero, or positive, or equal to INFTIM (-1).
Unless otherwise overridden, socket timeout defaults to -1. This value
is then converted to milliseconds (-1000) and used as argument to the
poll syscall. poll returns EINVAL (22), and the connection fails.
This bug was discovered during the EINTR handling testing, and the
reproduction code can be found in
https://bugs.python.org/issue23618 (see connect_eintr.py,
attached). On GNU/Linux, the example runs as expected.
This change is trivial:
If the supplied timeout value is negative, truncate it to -1.
* bpo-37256: Wording in Request class docs
* 📜🤖 Added by blurb_it.
* Update Misc/NEWS.d/next/Documentation/2019-07-16-14-48-12.bpo-37256.qJTrBb.rst
Co-Authored-By: Kyle Stanley <aeros167@gmail.com>
- Remove use of replacement text in the script
- Make use of the pyvenv.cfg file for prompt value.
- Add parameters to allow more flexibility
- Make use of the current path, and assumptions about where env puts things, to compensate
- Make the script a bit more 'idiomatic' Powershell
- Add script documentation (Get-Help .\.venv\Scripts\Activate.ps1 shows PS help page now
This should fix the IndexError trying to retrieve `DisplayName.display_name` and `DisplayName.value` when the `value` is basically an empty string.
https://bugs.python.org/issue32178
DeprecationWarning will continue to be emitted for invalid escape
sequences in string and bytes literals just as it did in 3.7.
SyntaxWarning may be emitted in the future. But per mailing list
discussion, we don't yet know when because we haven't settled on how to
do so in a non-disruptive manner.
(Applies 4c5b6bac24 to the master branch).
(This is https://github.com/python/cpython/pull/15142 for master/3.9)
https://bugs.python.org/issue32912
Automerge-Triggered-By: @gpshead
This fixes an inconsistency between the Python and C implementations of
the datetime module. The pure python version of the code was not
accepting offsets greater than 23:59 but less than 24:00. This is an
accidental legacy of the original implementation, which was put in place
before tzinfo allowed sub-minute time zone offsets.
GH-14878
There was a discrepancy between the Python and C implementations.
Add singletons ALWAYS_EQ, LARGEST and SMALLEST in test.support
to test mixed type comparison.
Imports now raise `TypeError` instead of `ValueError` for relative import failures. This makes things consistent between `builtins.__import__` and `importlib.__import__` as well as using a more natural import for the failure.
https://bugs.python.org/issue37444
Automerge-Triggered-By: @brettcannon
Previously pdb checked the $HOME environmental variable
to find the user .pdbrc. If $HOME is not set, the user
.pdbrc would not be found.
Change pdb to use `os.path.expanduser('~')` to determine
the user's home directory. Thus, if $HOME is not set (as
in tox or on Windows), os.path.expanduser('~') falls
back on other techniques for locating the user's home
directory.
This follows pip's implementation for loading .piprc.
Co-authored-by: Dan Lidral-Porter <dlp@aperiodic.org>
Support for RFCOMM, L2CAP, HCI, SCO is based on the BTPROTO_* macros
being defined. Winsock only supports RFCOMM, even though it has a
BTHPROTO_L2CAP macro. L2CAP support would build on windows, but not
necessarily work.
This also adds some basic unittests for constants (all of which existed
prior to this commit, just not on windows) and creating sockets.
pair: Nate Duarte <slacknate@gmail.com>
* bpo-37742: Return the root logger when logging.getLogger('root') is called.
* Added type check guard on logger name in logging.getLogger() and refined a test.
BPO -16970: Adding error message for invalid args
Applied the patch argparse-v2 patch issue 16970, ran patch check and the test suite, test_argparse with 0 errors
https://bugs.python.org/issue16970
This changeset increases the default size of the stack
for threads on macOS to the size of the stack
of the main thread and reenables the relevant
recursion test.
Expose the CAN_BCM SocketCAN constants used in the bcm_msg_head struct
flags (provided by <linux/can/bcm.h>) under the socket library.
This adds the following constants with a CAN_BCM prefix:
* SETTIMER
* STARTTIMER
* TX_COUNTEVT
* TX_ANNOUNCE
* TX_CP_CAN_ID
* RX_FILTER_ID
* RX_CHECK_DLC
* RX_NO_AUTOTIMER
* RX_ANNOUNCE_RESUME
* TX_RESET_MULTI_IDX
* RX_RTR_FRAME
* CAN_FD_FRAME
The CAN_FD_FRAME flag was introduced in the 4.8 kernel, while the other
ones were present since SocketCAN drivers were mainlined in 2.6.25. As
such, it is probably unnecessary to guard against these constants being
missing.
Mark some individual tests to skip when --pgo is used. The tests
marked increase the PGO task time significantly and likely don't
help improve optimization of the final executable.
When scanning the string, most characters are valid, so
checking for invalid characters first means never needing
to check the value of strict on valid strings, and only
needing to check it on invalid characters when doing
non-strict parsing of invalid strings.
This provides a measurable reduction in per-character
processing time (~11% in the pre-merge patch testing).
Deprecate the parser module and add a deprecation warning triggered on import and a warning block in the documentation.
https://bugs.python.org/issue37268
Automerge-Triggered-By: @pablogsal
The boxes for the font and highlight samples are now constrained by the overall config dialog size. They gain scrollbars when the when a large font size makes the samples too large for the box.
Reduce the number of unit tests run for the PGO generation task. This
speeds up the task by a factor of about 15x. Running the full unit test
suite is slow. This change may result in a slightly less optimized build
since not as many code branches will be executed. If you are willing to
wait for the much slower build, the old behavior can be restored using
'./configure [..] PROFILE_TASK="-m test --pgo-extended"'. We make no
guarantees as to which PGO task set produces a faster build. Users who
care should run their own relevant benchmarks as results can depend on
the environment, workload, and compiler tool chain.
* Clear name and parent of mock in autospecced objects used with attach_mock
* Add NEWS entry
* Fix reversed order of comparison
* Test child and standalone function calls
* Use a helper function extracting mock to avoid code duplication and refactor tests.
Add two indent spec methods from editor and Rstrip to existing file.
Tests are not added for indent methods because they need change
in lights of 3.x's prohibition on mixing tabs and spaces.
* bpo-37461: Fix infinite loop in parsing of specially crafted email headers.
Some crafted email header would cause the get_parameter method to run in an
infinite loop causing a DoS attack surface when parsing those headers. This
patch fixes that by making sure the DQUOTE character is handled to prevent
going into an infinite loop.
PyObject_Malloc() and PyObject_Free() inlines pymalloc_alloc and
pymalloc_free partially.
But when PGO is not used, compiler don't know where is the hot part
in pymalloc_alloc and pymalloc_free.
* Only create CodeContext instances for "real" editors windows, but
not e.g. shell or output windows.
* Remove configuration update Tk event fired every second, by having
the editor window ask its code context widget to update when
necessary, i.e. upon font or highlighting updates.
* When code context isn't being shown, avoid having a Tk event fired
every 100ms to check whether the code context needs to be updated.
* Use the editor window's getlineno() method where applicable.
* Update font of the code context widget before the main text widget
As far as I can tell, this infinite loop would be triggered if:
1. The value being folded contains a single word (no spaces) longer than
max_line_length
2. The max_line_length is shorter than the encoding's name + 9
characters.
bpo-36564: https://bugs.python.org/issue36564
The `allow_abbrev` option for ArgumentParser is documented and intended to disable support for unique prefixes of --options, which may sometimes be ambiguous due to deferred parsing.
However, the initial implementation also broke parsing of grouped short flags, such as `-ab` meaning `-a -b` (or `-a=b`). Checking the argument for a leading `--` before rejecting it fixes this.
This was prompted by pytest-dev/pytest#5469, so a backport to at least 3.8 would be great 😄
And this is my first PR to CPython, so please let me know if I've missed anything!
https://bugs.python.org/issue26967
Hi,
I've faced an issue w/ `mailbox.Maildir()`. The case is following:
1. I create a folder with `tempfile.TemporaryDirectory()`, so it's empty
2. I pass that folder path as an argument when instantiating `mailbox.Maildir()`
3. Then I receive an exception happening because "there's no such file or directory" (namely `cur`, `tmp` or `new`) during interaction with Maildir
**Expected result:** subdirs are created during `Maildir()` instance creation.
**Actual result:** subdirs are assumed as existing which leads to exceptions during use.
**Workaround:** remove the actual dir before passing the path to `Maildir()`. It will be created automatically with all subdirs needed.
**Fix:** This PR. Basically it adds creation of subdirs regardless of whether the base dir existed before.
https://bugs.python.org/issue30088
Returns NotImplemented for timedelta and time in __eq__ for different types in Python implementation, which matches the C implementation.
This also adds tests to enforce that these objects will fall back to the right hand side's __eq__ and/or __ne__ implementation.
bpo-37579
Steve Dower
Anthony Sottile
Jordon Xu
Victor Stinner
Greg Price
Zackery Spytz
Joannah Nanjekye
Eric V. Smith
shireenrao
Jeroen Demeyer
Raymond Hettinger
Artem Khramov
Tal Einat
Ngalim Siregar
Hai Shi
Derek Keeler
Dong-hee Na
Abhilash Raj
Gregory P. Smith
Serhiy Storchaka
aiudirog
sweeneyde
Sergey Fedoseev
Terry Jan Reedy
Michael Felt
Timothy Hopper
Greg Bowser
Vinay Sajip
tmblweed
mental
Bernhard M. Wiedemann
Ronald Oussoren
yannvgn
karl ding
Min ho Kim
Neil Schemenauer
Marco Paolini
Pablo Galindo
Jason R. Coombs
Inada Naoki
Flavian Hautbois
Markus Mohrhard
Benjamin Peterson
Pradyun Gedam
Tal Einat
Xtreak
Walter Dörwald
jpic
Cheryl Sabella
Paul Ganssle
Giovanni Cappellotto
Zac Hatfield-Dodds
Sviatoslav Sydorenko
Minmin Gong
gescheit