From a566912049722386478c075b83534fa9f7a1de45 Mon Sep 17 00:00:00 2001 From: Christian Heimes Date: Mon, 25 Jul 2022 15:50:46 +0200 Subject: [PATCH] gh-85454: Remove distutils documentation (#95239) Most places now refer to setuptools or link to setuptools documentation. Some examples like zipapp need to be updated later. --- Doc/contents.rst | 1 - Doc/distutils/_setuptools_disclaimer.rst | 5 - Doc/distutils/apiref.rst | 2041 ---------------------- Doc/distutils/builtdist.rst | 392 ----- Doc/distutils/commandref.rst | 105 -- Doc/distutils/configfile.rst | 144 -- Doc/distutils/examples.rst | 340 ---- Doc/distutils/extending.rst | 98 -- Doc/distutils/index.rst | 49 - Doc/distutils/introduction.rst | 203 --- Doc/distutils/packageindex.rst | 16 - Doc/distutils/setupscript.rst | 713 -------- Doc/distutils/sourcedist.rst | 245 --- Doc/distutils/uploading.rst | 8 - Doc/extending/building.rst | 126 +- Doc/extending/windows.rst | 8 +- Doc/install/index.rst | 6 +- Doc/library/distribution.rst | 1 - Doc/library/distutils.rst | 49 - Doc/library/sysconfig.rst | 2 +- Doc/library/venv.rst | 2 +- Doc/using/configure.rst | 2 +- Doc/using/windows.rst | 9 +- Doc/whatsnew/2.7.rst | 2 +- Doc/whatsnew/3.4.rst | 2 +- 25 files changed, 26 insertions(+), 4543 deletions(-) delete mode 100644 Doc/distutils/_setuptools_disclaimer.rst delete mode 100644 Doc/distutils/apiref.rst delete mode 100644 Doc/distutils/builtdist.rst delete mode 100644 Doc/distutils/commandref.rst delete mode 100644 Doc/distutils/configfile.rst delete mode 100644 Doc/distutils/examples.rst delete mode 100644 Doc/distutils/extending.rst delete mode 100644 Doc/distutils/index.rst delete mode 100644 Doc/distutils/introduction.rst delete mode 100644 Doc/distutils/packageindex.rst delete mode 100644 Doc/distutils/setupscript.rst delete mode 100644 Doc/distutils/sourcedist.rst delete mode 100644 Doc/distutils/uploading.rst delete mode 100644 Doc/library/distutils.rst diff --git a/Doc/contents.rst b/Doc/contents.rst index 8690de77bf3..464f93bdf85 100644 --- a/Doc/contents.rst +++ b/Doc/contents.rst @@ -27,5 +27,4 @@ .. toctree:: :hidden: - distutils/index.rst install/index.rst diff --git a/Doc/distutils/_setuptools_disclaimer.rst b/Doc/distutils/_setuptools_disclaimer.rst deleted file mode 100644 index cc75858326d..00000000000 --- a/Doc/distutils/_setuptools_disclaimer.rst +++ /dev/null @@ -1,5 +0,0 @@ -.. note:: - - This document is being retained solely until the ``setuptools`` documentation - at https://setuptools.readthedocs.io/en/latest/setuptools.html - independently covers all of the relevant information currently included here. diff --git a/Doc/distutils/apiref.rst b/Doc/distutils/apiref.rst deleted file mode 100644 index 87c92855555..00000000000 --- a/Doc/distutils/apiref.rst +++ /dev/null @@ -1,2041 +0,0 @@ -.. _api-reference: - -************* -API Reference -************* - -.. seealso:: - - `New and changed setup.py arguments in setuptools`_ - The ``setuptools`` project adds new capabilities to the ``setup`` function - and other APIs, makes the API consistent across different Python versions, - and is hence recommended over using ``distutils`` directly. - -.. _New and changed setup.py arguments in setuptools: https://web.archive.org/web/20210614192516/https://setuptools.pypa.io/en/stable/userguide/keywords.html - -.. include:: ./_setuptools_disclaimer.rst - -:mod:`distutils.core` --- Core Distutils functionality -====================================================== - -.. module:: distutils.core - :synopsis: The core Distutils functionality - - -The :mod:`distutils.core` module is the only module that needs to be installed -to use the Distutils. It provides the :func:`setup` (which is called from the -setup script). Indirectly provides the :class:`distutils.dist.Distribution` and -:class:`distutils.cmd.Command` class. - - -.. function:: setup(arguments) - - The basic do-everything function that does most everything you could ever ask - for from a Distutils method. - - The setup function takes a large number of arguments. These are laid out in the - following table. - - .. tabularcolumns:: |l|L|L| - - +--------------------+--------------------------------+-------------------------------------------------------------+ - | argument name | value | type | - +====================+================================+=============================================================+ - | *name* | The name of the package | a string | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *version* | The version number of the | a string | - | | package; see | | - | | :mod:`distutils.version` | | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *description* | A single line describing the | a string | - | | package | | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *long_description* | Longer description of the | a string | - | | package | | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *author* | The name of the package author | a string | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *author_email* | The email address of the | a string | - | | package author | | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *maintainer* | The name of the current | a string | - | | maintainer, if different from | | - | | the author. Note that if | | - | | the maintainer is provided, | | - | | distutils will use it as the | | - | | author in :file:`PKG-INFO` | | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *maintainer_email* | The email address of the | a string | - | | current maintainer, if | | - | | different from the author | | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *url* | A URL for the package | a string | - | | (homepage) | | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *download_url* | A URL to download the package | a string | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *packages* | A list of Python packages that | a list of strings | - | | distutils will manipulate | | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *py_modules* | A list of Python modules that | a list of strings | - | | distutils will manipulate | | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *scripts* | A list of standalone script | a list of strings | - | | files to be built and | | - | | installed | | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *ext_modules* | A list of Python extensions to | a list of instances of | - | | be built | :class:`distutils.core.Extension` | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *classifiers* | A list of categories for the | a list of strings; valid classifiers are listed on `PyPI | - | | package | `_. | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *distclass* | the :class:`Distribution` | a subclass of | - | | class to use | :class:`distutils.core.Distribution` | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *script_name* | The name of the setup.py | a string | - | | script - defaults to | | - | | ``sys.argv[0]`` | | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *script_args* | Arguments to supply to the | a list of strings | - | | setup script | | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *options* | default options for the setup | a dictionary | - | | script | | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *license* | The license for the package | a string | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *keywords* | Descriptive meta-data, see | a list of strings or a comma-separated string | - | | :pep:`314` | | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *platforms* | | a list of strings or a comma-separated string | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *cmdclass* | A mapping of command names to | a dictionary | - | | :class:`Command` subclasses | | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *data_files* | A list of data files to | a list | - | | install | | - +--------------------+--------------------------------+-------------------------------------------------------------+ - | *package_dir* | A mapping of package to | a dictionary | - | | directory names | | - +--------------------+--------------------------------+-------------------------------------------------------------+ - - - -.. function:: run_setup(script_name[, script_args=None, stop_after='run']) - - Run a setup script in a somewhat controlled environment, and return the - :class:`distutils.dist.Distribution` instance that drives things. This is - useful if you need to find out the distribution meta-data (passed as keyword - args from *script* to :func:`setup`), or the contents of the config files or - command-line. - - *script_name* is a file that will be read and run with :func:`exec`. ``sys.argv[0]`` - will be replaced with *script* for the duration of the call. *script_args* is a - list of strings; if supplied, ``sys.argv[1:]`` will be replaced by *script_args* - for the duration of the call. - - *stop_after* tells :func:`setup` when to stop processing; possible values: - - .. tabularcolumns:: |l|L| - - +---------------+---------------------------------------------+ - | value | description | - +===============+=============================================+ - | *init* | Stop after the :class:`Distribution` | - | | instance has been created and populated | - | | with the keyword arguments to :func:`setup` | - +---------------+---------------------------------------------+ - | *config* | Stop after config files have been parsed | - | | (and their data stored in the | - | | :class:`Distribution` instance) | - +---------------+---------------------------------------------+ - | *commandline* | Stop after the command-line | - | | (``sys.argv[1:]`` or *script_args*) have | - | | been parsed (and the data stored in the | - | | :class:`Distribution` instance.) | - +---------------+---------------------------------------------+ - | *run* | Stop after all commands have been run (the | - | | same as if :func:`setup` had been called | - | | in the usual way). This is the default | - | | value. | - +---------------+---------------------------------------------+ - -In addition, the :mod:`distutils.core` module exposed a number of classes that -live elsewhere. - -* :class:`~distutils.extension.Extension` from :mod:`distutils.extension` - -* :class:`~distutils.cmd.Command` from :mod:`distutils.cmd` - -* :class:`~distutils.dist.Distribution` from :mod:`distutils.dist` - -A short description of each of these follows, but see the relevant module for -the full reference. - - -.. class:: Extension - - The Extension class describes a single C or C++ extension module in a setup - script. It accepts the following keyword arguments in its constructor: - - .. tabularcolumns:: |l|L|l| - - +------------------------+--------------------------------+---------------------------+ - | argument name | value | type | - +========================+================================+===========================+ - | *name* | the full name of the | a string | - | | extension, including any | | - | | packages --- ie. *not* a | | - | | filename or pathname, but | | - | | Python dotted name | | - +------------------------+--------------------------------+---------------------------+ - | *sources* | list of source filenames, | a list of strings | - | | relative to the distribution | | - | | root (where the setup script | | - | | lives), in Unix form | | - | | (slash-separated) for | | - | | portability. | | - | | Source files may be C, C++, | | - | | SWIG (.i), platform-specific | | - | | resource files, or whatever | | - | | else is recognized by the | | - | | :command:`build_ext` command | | - | | as source for a Python | | - | | extension. | | - +------------------------+--------------------------------+---------------------------+ - | *include_dirs* | list of directories to search | a list of strings | - | | for C/C++ header files (in | | - | | Unix form for portability) | | - +------------------------+--------------------------------+---------------------------+ - | *define_macros* | list of macros to define; each | a list of tuples | - | | macro is defined using a | | - | | 2-tuple ``(name, value)``, | | - | | where *value* is | | - | | either the string to define it | | - | | to or ``None`` to define it | | - | | without a particular value | | - | | (equivalent of ``#define FOO`` | | - | | in source or :option:`!-DFOO` | | - | | on Unix C compiler command | | - | | line) | | - +------------------------+--------------------------------+---------------------------+ - | *undef_macros* | list of macros to undefine | a list of strings | - | | explicitly | | - +------------------------+--------------------------------+---------------------------+ - | *library_dirs* | list of directories to search | a list of strings | - | | for C/C++ libraries at link | | - | | time | | - +------------------------+--------------------------------+---------------------------+ - | *libraries* | list of library names (not | a list of strings | - | | filenames or paths) to link | | - | | against | | - +------------------------+--------------------------------+---------------------------+ - | *runtime_library_dirs* | list of directories to search | a list of strings | - | | for C/C++ libraries at run | | - | | time (for shared extensions, | | - | | this is when the extension is | | - | | loaded) | | - +------------------------+--------------------------------+---------------------------+ - | *extra_objects* | list of extra files to link | a list of strings | - | | with (eg. object files not | | - | | implied by 'sources', static | | - | | library that must be | | - | | explicitly specified, binary | | - | | resource files, etc.) | | - +------------------------+--------------------------------+---------------------------+ - | *extra_compile_args* | any extra platform- and | a list of strings | - | | compiler-specific information | | - | | to use when compiling the | | - | | source files in 'sources'. For | | - | | platforms and compilers where | | - | | a command line makes sense, | | - | | this is typically a list of | | - | | command-line arguments, but | | - | | for other platforms it could | | - | | be anything. | | - +------------------------+--------------------------------+---------------------------+ - | *extra_link_args* | any extra platform- and | a list of strings | - | | compiler-specific information | | - | | to use when linking object | | - | | files together to create the | | - | | extension (or to create a new | | - | | static Python interpreter). | | - | | Similar interpretation as for | | - | | 'extra_compile_args'. | | - +------------------------+--------------------------------+---------------------------+ - | *export_symbols* | list of symbols to be exported | a list of strings | - | | from a shared extension. Not | | - | | used on all platforms, and not | | - | | generally necessary for Python | | - | | extensions, which typically | | - | | export exactly one symbol: | | - | | ``init`` + extension_name. | | - +------------------------+--------------------------------+---------------------------+ - | *depends* | list of files that the | a list of strings | - | | extension depends on | | - +------------------------+--------------------------------+---------------------------+ - | *language* | extension language (i.e. | a string | - | | ``'c'``, ``'c++'``, | | - | | ``'objc'``). Will be detected | | - | | from the source extensions if | | - | | not provided. | | - +------------------------+--------------------------------+---------------------------+ - | *optional* | specifies that a build failure | a boolean | - | | in the extension should not | | - | | abort the build process, but | | - | | simply skip the extension. | | - +------------------------+--------------------------------+---------------------------+ - - .. versionchanged:: 3.8 - - On Unix, C extensions are no longer linked to libpython except on - Android and Cygwin. - - -.. class:: Distribution - - A :class:`Distribution` describes how to build, install and package up a Python - software package. - - See the :func:`setup` function for a list of keyword arguments accepted by the - Distribution constructor. :func:`setup` creates a Distribution instance. - - .. versionchanged:: 3.7 - :class:`~distutils.core.Distribution` now warns if ``classifiers``, - ``keywords`` and ``platforms`` fields are not specified as a list or - a string. - -.. class:: Command - - A :class:`Command` class (or rather, an instance of one of its subclasses) - implement a single distutils command. - - -:mod:`distutils.ccompiler` --- CCompiler base class -=================================================== - -.. module:: distutils.ccompiler - :synopsis: Abstract CCompiler class - - -This module provides the abstract base class for the :class:`CCompiler` -classes. A :class:`CCompiler` instance can be used for all the compile and -link steps needed to build a single project. Methods are provided to set -options for the compiler --- macro definitions, include directories, link path, -libraries and the like. - -This module provides the following functions. - - -.. function:: gen_lib_options(compiler, library_dirs, runtime_library_dirs, libraries) - - Generate linker options for searching library directories and linking with - specific libraries. *libraries* and *library_dirs* are, respectively, lists of - library names (not filenames!) and search directories. Returns a list of - command-line options suitable for use with some compiler (depending on the two - format strings passed in). - - -.. function:: gen_preprocess_options(macros, include_dirs) - - Generate C pre-processor options (:option:`!-D`, :option:`!-U`, :option:`!-I`) as - used by at least two types of compilers: the typical Unix compiler and Visual - C++. *macros* is the usual thing, a list of 1- or 2-tuples, where ``(name,)`` - means undefine (:option:`!-U`) macro *name*, and ``(name, value)`` means define - (:option:`!-D`) macro *name* to *value*. *include_dirs* is just a list of - directory names to be added to the header file search path (:option:`!-I`). - Returns a list of command-line options suitable for either Unix compilers or - Visual C++. - - -.. function:: get_default_compiler(osname, platform) - - Determine the default compiler to use for the given platform. - - *osname* should be one of the standard Python OS names (i.e. the ones returned - by ``os.name``) and *platform* the common value returned by ``sys.platform`` for - the platform in question. - - The default values are ``os.name`` and ``sys.platform`` in case the parameters - are not given. - - -.. function:: new_compiler(plat=None, compiler=None, verbose=0, dry_run=0, force=0) - - Factory function to generate an instance of some CCompiler subclass for the - supplied platform/compiler combination. *plat* defaults to ``os.name`` (eg. - ``'posix'``, ``'nt'``), and *compiler* defaults to the default compiler for - that platform. Currently only ``'posix'`` and ``'nt'`` are supported, and the - default compilers are "traditional Unix interface" (:class:`UnixCCompiler` - class) and Visual C++ (:class:`MSVCCompiler` class). Note that it's perfectly - possible to ask for a Unix compiler object under Windows, and a Microsoft - compiler object under Unix---if you supply a value for *compiler*, *plat* is - ignored. - - .. % Is the posix/nt only thing still true? macOS seems to work, and - .. % returns a UnixCCompiler instance. How to document this... hmm. - - -.. function:: show_compilers() - - Print list of available compilers (used by the :option:`!--help-compiler` options - to :command:`build`, :command:`build_ext`, :command:`build_clib`). - - -.. class:: CCompiler([verbose=0, dry_run=0, force=0]) - - The abstract base class :class:`CCompiler` defines the interface that must be - implemented by real compiler classes. The class also has some utility methods - used by several compiler classes. - - The basic idea behind a compiler abstraction class is that each instance can be - used for all the compile/link steps in building a single project. Thus, - attributes common to all of those compile and link steps --- include - directories, macros to define, libraries to link against, etc. --- are - attributes of the compiler instance. To allow for variability in how individual - files are treated, most of those attributes may be varied on a per-compilation - or per-link basis. - - The constructor for each subclass creates an instance of the Compiler object. - Flags are *verbose* (show verbose output), *dry_run* (don't actually execute the - steps) and *force* (rebuild everything, regardless of dependencies). All of - these flags default to ``0`` (off). Note that you probably don't want to - instantiate :class:`CCompiler` or one of its subclasses directly - use the - :func:`distutils.CCompiler.new_compiler` factory function instead. - - The following methods allow you to manually alter compiler options for the - instance of the Compiler class. - - - .. method:: CCompiler.add_include_dir(dir) - - Add *dir* to the list of directories that will be searched for header files. - The compiler is instructed to search directories in the order in which they are - supplied by successive calls to :meth:`add_include_dir`. - - - .. method:: CCompiler.set_include_dirs(dirs) - - Set the list of directories that will be searched to *dirs* (a list of strings). - Overrides any preceding calls to :meth:`add_include_dir`; subsequent calls to - :meth:`add_include_dir` add to the list passed to :meth:`set_include_dirs`. - This does not affect any list of standard include directories that the compiler - may search by default. - - - .. method:: CCompiler.add_library(libname) - - Add *libname* to the list of libraries that will be included in all links driven - by this compiler object. Note that *libname* should \*not\* be the name of a - file containing a library, but the name of the library itself: the actual - filename will be inferred by the linker, the compiler, or the compiler class - (depending on the platform). - - The linker will be instructed to link against libraries in the order they were - supplied to :meth:`add_library` and/or :meth:`set_libraries`. It is perfectly - valid to duplicate library names; the linker will be instructed to link against - libraries as many times as they are mentioned. - - - .. method:: CCompiler.set_libraries(libnames) - - Set the list of libraries to be included in all links driven by this compiler - object to *libnames* (a list of strings). This does not affect any standard - system libraries that the linker may include by default. - - - .. method:: CCompiler.add_library_dir(dir) - - Add *dir* to the list of directories that will be searched for libraries - specified to :meth:`add_library` and :meth:`set_libraries`. The linker will be - instructed to search for libraries in the order they are supplied to - :meth:`add_library_dir` and/or :meth:`set_library_dirs`. - - - .. method:: CCompiler.set_library_dirs(dirs) - - Set the list of library search directories to *dirs* (a list of strings). This - does not affect any standard library search path that the linker may search by - default. - - - .. method:: CCompiler.add_runtime_library_dir(dir) - - Add *dir* to the list of directories that will be searched for shared libraries - at runtime. - - - .. method:: CCompiler.set_runtime_library_dirs(dirs) - - Set the list of directories to search for shared libraries at runtime to *dirs* - (a list of strings). This does not affect any standard search path that the - runtime linker may search by default. - - - .. method:: CCompiler.define_macro(name[, value=None]) - - Define a preprocessor macro for all compilations driven by this compiler object. - The optional parameter *value* should be a string; if it is not supplied, then - the macro will be defined without an explicit value and the exact outcome - depends on the compiler used. - - .. XXX true? does ANSI say anything about this? - - - .. method:: CCompiler.undefine_macro(name) - - Undefine a preprocessor macro for all compilations driven by this compiler - object. If the same macro is defined by :meth:`define_macro` and - undefined by :meth:`undefine_macro` the last call takes precedence - (including multiple redefinitions or undefinitions). If the macro is - redefined/undefined on a per-compilation basis (ie. in the call to - :meth:`compile`), then that takes precedence. - - - .. method:: CCompiler.add_link_object(object) - - Add *object* to the list of object files (or analogues, such as explicitly named - library files or the output of "resource compilers") to be included in every - link driven by this compiler object. - - - .. method:: CCompiler.set_link_objects(objects) - - Set the list of object files (or analogues) to be included in every link to - *objects*. This does not affect any standard object files that the linker may - include by default (such as system libraries). - - The following methods implement methods for autodetection of compiler options, - providing some functionality similar to GNU :program:`autoconf`. - - - .. method:: CCompiler.detect_language(sources) - - Detect the language of a given file, or list of files. Uses the instance - attributes :attr:`language_map` (a dictionary), and :attr:`language_order` (a - list) to do the job. - - - .. method:: CCompiler.find_library_file(dirs, lib[, debug=0]) - - Search the specified list of directories for a static or shared library file - *lib* and return the full path to that file. If *debug* is true, look for a - debugging version (if that makes sense on the current platform). Return - ``None`` if *lib* wasn't found in any of the specified directories. - - - .. method:: CCompiler.has_function(funcname [, includes=None, include_dirs=None, libraries=None, library_dirs=None]) - - Return a boolean indicating whether *funcname* is supported on the current - platform. The optional arguments can be used to augment the compilation - environment by providing additional include files and paths and libraries and - paths. - - - .. method:: CCompiler.library_dir_option(dir) - - Return the compiler option to add *dir* to the list of directories searched for - libraries. - - - .. method:: CCompiler.library_option(lib) - - Return the compiler option to add *lib* to the list of libraries linked into the - shared library or executable. - - - .. method:: CCompiler.runtime_library_dir_option(dir) - - Return the compiler option to add *dir* to the list of directories searched for - runtime libraries. - - - .. method:: CCompiler.set_executables(**args) - - Define the executables (and options for them) that will be run to perform the - various stages of compilation. The exact set of executables that may be - specified here depends on the compiler class (via the 'executables' class - attribute), but most will have: - - +--------------+------------------------------------------+ - | attribute | description | - +==============+==========================================+ - | *compiler* | the C/C++ compiler | - +--------------+------------------------------------------+ - | *linker_so* | linker used to create shared objects and | - | | libraries | - +--------------+------------------------------------------+ - | *linker_exe* | linker used to create binary executables | - +--------------+------------------------------------------+ - | *archiver* | static library creator | - +--------------+------------------------------------------+ - - On platforms with a command-line (Unix, DOS/Windows), each of these is a string - that will be split into executable name and (optional) list of arguments. - (Splitting the string is done similarly to how Unix shells operate: words are - delimited by spaces, but quotes and backslashes can override this. See - :func:`distutils.util.split_quoted`.) - - The following methods invoke stages in the build process. - - - .. method:: CCompiler.compile(sources[, output_dir=None, macros=None, include_dirs=None, debug=0, extra_preargs=None, extra_postargs=None, depends=None]) - - Compile one or more source files. Generates object files (e.g. transforms a - :file:`.c` file to a :file:`.o` file.) - - *sources* must be a list of filenames, most likely C/C++ files, but in reality - anything that can be handled by a particular compiler and compiler class (eg. - :class:`MSVCCompiler` can handle resource files in *sources*). Return a list of - object filenames, one per source filename in *sources*. Depending on the - implementation, not all source files will necessarily be compiled, but all - corresponding object filenames will be returned. - - If *output_dir* is given, object files will be put under it, while retaining - their original path component. That is, :file:`foo/bar.c` normally compiles to - :file:`foo/bar.o` (for a Unix implementation); if *output_dir* is *build*, then - it would compile to :file:`build/foo/bar.o`. - - *macros*, if given, must be a list of macro definitions. A macro definition is - either a ``(name, value)`` 2-tuple or a ``(name,)`` 1-tuple. The former defines - a macro; if the value is ``None``, the macro is defined without an explicit - value. The 1-tuple case undefines a macro. Later - definitions/redefinitions/undefinitions take precedence. - - *include_dirs*, if given, must be a list of strings, the directories to add to - the default include file search path for this compilation only. - - *debug* is a boolean; if true, the compiler will be instructed to output debug - symbols in (or alongside) the object file(s). - - *extra_preargs* and *extra_postargs* are implementation-dependent. On platforms - that have the notion of a command-line (e.g. Unix, DOS/Windows), they are most - likely lists of strings: extra command-line arguments to prepend/append to the - compiler command line. On other platforms, consult the implementation class - documentation. In any event, they are intended as an escape hatch for those - occasions when the abstract compiler framework doesn't cut the mustard. - - *depends*, if given, is a list of filenames that all targets depend on. If a - source file is older than any file in depends, then the source file will be - recompiled. This supports dependency tracking, but only at a coarse - granularity. - - Raises :exc:`CompileError` on failure. - - - .. method:: CCompiler.create_static_lib(objects, output_libname[, output_dir=None, debug=0, target_lang=None]) - - Link a bunch of stuff together to create a static library file. The "bunch of - stuff" consists of the list of object files supplied as *objects*, the extra - object files supplied to :meth:`add_link_object` and/or - :meth:`set_link_objects`, the libraries supplied to :meth:`add_library` and/or - :meth:`set_libraries`, and the libraries supplied as *libraries* (if any). - - *output_libname* should be a library name, not a filename; the filename will be - inferred from the library name. *output_dir* is the directory where the library - file will be put. - - .. XXX defaults to what? - - *debug* is a boolean; if true, debugging information will be included in the - library (note that on most platforms, it is the compile step where this matters: - the *debug* flag is included here just for consistency). - - *target_lang* is the target language for which the given objects are being - compiled. This allows specific linkage time treatment of certain languages. - - Raises :exc:`LibError` on failure. - - - .. method:: CCompiler.link(target_desc, objects, output_filename[, output_dir=None, libraries=None, library_dirs=None, runtime_library_dirs=None, export_symbols=None, debug=0, extra_preargs=None, extra_postargs=None, build_temp=None, target_lang=None]) - - Link a bunch of stuff together to create an executable or shared library file. - - The "bunch of stuff" consists of the list of object files supplied as *objects*. - *output_filename* should be a filename. If *output_dir* is supplied, - *output_filename* is relative to it (i.e. *output_filename* can provide - directory components if needed). - - *libraries* is a list of libraries to link against. These are library names, - not filenames, since they're translated into filenames in a platform-specific - way (eg. *foo* becomes :file:`libfoo.a` on Unix and :file:`foo.lib` on - DOS/Windows). However, they can include a directory component, which means the - linker will look in that specific directory rather than searching all the normal - locations. - - *library_dirs*, if supplied, should be a list of directories to search for - libraries that were specified as bare library names (ie. no directory - component). These are on top of the system default and those supplied to - :meth:`add_library_dir` and/or :meth:`set_library_dirs`. *runtime_library_dirs* - is a list of directories that will be embedded into the shared library and used - to search for other shared libraries that \*it\* depends on at run-time. (This - may only be relevant on Unix.) - - *export_symbols* is a list of symbols that the shared library will export. - (This appears to be relevant only on Windows.) - - *debug* is as for :meth:`compile` and :meth:`create_static_lib`, with the - slight distinction that it actually matters on most platforms (as opposed to - :meth:`create_static_lib`, which includes a *debug* flag mostly for form's - sake). - - *extra_preargs* and *extra_postargs* are as for :meth:`compile` (except of - course that they supply command-line arguments for the particular linker being - used). - - *target_lang* is the target language for which the given objects are being - compiled. This allows specific linkage time treatment of certain languages. - - Raises :exc:`LinkError` on failure. - - - .. method:: CCompiler.link_executable(objects, output_progname[, output_dir=None, libraries=None, library_dirs=None, runtime_library_dirs=None, debug=0, extra_preargs=None, extra_postargs=None, target_lang=None]) - - Link an executable. *output_progname* is the name of the file executable, while - *objects* are a list of object filenames to link in. Other arguments are as for - the :meth:`link` method. - - - .. method:: CCompiler.link_shared_lib(objects, output_libname[, output_dir=None, libraries=None, library_dirs=None, runtime_library_dirs=None, export_symbols=None, debug=0, extra_preargs=None, extra_postargs=None, build_temp=None, target_lang=None]) - - Link a shared library. *output_libname* is the name of the output library, - while *objects* is a list of object filenames to link in. Other arguments are - as for the :meth:`link` method. - - - .. method:: CCompiler.link_shared_object(objects, output_filename[, output_dir=None, libraries=None, library_dirs=None, runtime_library_dirs=None, export_symbols=None, debug=0, extra_preargs=None, extra_postargs=None, build_temp=None, target_lang=None]) - - Link a shared object. *output_filename* is the name of the shared object that - will be created, while *objects* is a list of object filenames to link in. - Other arguments are as for the :meth:`link` method. - - - .. method:: CCompiler.preprocess(source[, output_file=None, macros=None, include_dirs=None, extra_preargs=None, extra_postargs=None]) - - Preprocess a single C/C++ source file, named in *source*. Output will be written - to file named *output_file*, or *stdout* if *output_file* not supplied. - *macros* is a list of macro definitions as for :meth:`compile`, which will - augment the macros set with :meth:`define_macro` and :meth:`undefine_macro`. - *include_dirs* is a list of directory names that will be added to the default - list, in the same way as :meth:`add_include_dir`. - - Raises :exc:`PreprocessError` on failure. - - The following utility methods are defined by the :class:`CCompiler` class, for - use by the various concrete subclasses. - - - .. method:: CCompiler.executable_filename(basename[, strip_dir=0, output_dir='']) - - Returns the filename of the executable for the given *basename*. Typically for - non-Windows platforms this is the same as the basename, while Windows will get - a :file:`.exe` added. - - - .. method:: CCompiler.library_filename(libname[, lib_type='static', strip_dir=0, output_dir='']) - - Returns the filename for the given library name on the current platform. On Unix - a library with *lib_type* of ``'static'`` will typically be of the form - :file:`liblibname.a`, while a *lib_type* of ``'dynamic'`` will be of the form - :file:`liblibname.so`. - - - .. method:: CCompiler.object_filenames(source_filenames[, strip_dir=0, output_dir='']) - - Returns the name of the object files for the given source files. - *source_filenames* should be a list of filenames. - - - .. method:: CCompiler.shared_object_filename(basename[, strip_dir=0, output_dir='']) - - Returns the name of a shared object file for the given file name *basename*. - - - .. method:: CCompiler.execute(func, args[, msg=None, level=1]) - - Invokes :func:`distutils.util.execute`. This method invokes a Python function - *func* with the given arguments *args*, after logging and taking into account - the *dry_run* flag. - - - .. method:: CCompiler.spawn(cmd) - - Invokes :func:`distutils.util.spawn`. This invokes an external process to run - the given command. - - - .. method:: CCompiler.mkpath(name[, mode=511]) - - Invokes :func:`distutils.dir_util.mkpath`. This creates a directory and any - missing ancestor directories. - - - .. method:: CCompiler.move_file(src, dst) - - Invokes :meth:`distutils.file_util.move_file`. Renames *src* to *dst*. - - - .. method:: CCompiler.announce(msg[, level=1]) - - Write a message using :func:`distutils.log.debug`. - - - .. method:: CCompiler.warn(msg) - - Write a warning message *msg* to standard error. - - - .. method:: CCompiler.debug_print(msg) - - If the *debug* flag is set on this :class:`CCompiler` instance, print *msg* to - standard output, otherwise do nothing. - -.. % \subsection{Compiler-specific modules} -.. % -.. % The following modules implement concrete subclasses of the abstract -.. % \class{CCompiler} class. They should not be instantiated directly, but should -.. % be created using \function{distutils.ccompiler.new_compiler()} factory -.. % function. - - -:mod:`distutils.unixccompiler` --- Unix C Compiler -================================================== - -.. module:: distutils.unixccompiler - :synopsis: UNIX C Compiler - - -This module provides the :class:`UnixCCompiler` class, a subclass of -:class:`CCompiler` that handles the typical Unix-style command-line C compiler: - -* macros defined with :option:`!-Dname[=value]` - -* macros undefined with :option:`!-Uname` - -* include search directories specified with :option:`!-Idir` - -* libraries specified with :option:`!-llib` - -* library search directories specified with :option:`!-Ldir` - -* compile handled by :program:`cc` (or similar) executable with :option:`!-c` - option: compiles :file:`.c` to :file:`.o` - -* link static library handled by :program:`ar` command (possibly with - :program:`ranlib`) - -* link shared library handled by :program:`cc` :option:`!-shared` - - -:mod:`distutils.msvccompiler` --- Microsoft Compiler -==================================================== - -.. module:: distutils.msvccompiler - :synopsis: Microsoft Compiler - -.. XXX: This is *waaaaay* out of date! - -This module provides :class:`MSVCCompiler`, an implementation of the abstract -:class:`CCompiler` class for Microsoft Visual Studio. Typically, extension -modules need to be compiled with the same compiler that was used to compile -Python. For Python 2.3 and earlier, the compiler was Visual Studio 6. For Python -2.4 and 2.5, the compiler is Visual Studio .NET 2003. - -:class:`MSVCCompiler` will normally choose the right compiler, linker etc. on -its own. To override this choice, the environment variables *DISTUTILS_USE_SDK* -and *MSSdk* must be both set. *MSSdk* indicates that the current environment has -been setup by the SDK's ``SetEnv.Cmd`` script, or that the environment variables -had been registered when the SDK was installed; *DISTUTILS_USE_SDK* indicates -that the distutils user has made an explicit choice to override the compiler -selection by :class:`MSVCCompiler`. - - -:mod:`distutils.bcppcompiler` --- Borland Compiler -================================================== - -.. module:: distutils.bcppcompiler - - -This module provides :class:`BorlandCCompiler`, a subclass of the abstract -:class:`CCompiler` class for the Borland C++ compiler. - - -:mod:`distutils.cygwincompiler` --- Cygwin Compiler -=================================================== - -.. module:: distutils.cygwinccompiler - - -This module provides the :class:`CygwinCCompiler` class, a subclass of -:class:`UnixCCompiler` that handles the Cygwin port of the GNU C compiler to -Windows. It also contains the Mingw32CCompiler class which handles the mingw32 -port of GCC (same as cygwin in no-cygwin mode). - - -:mod:`distutils.archive_util` --- Archiving utilities -====================================================== - -.. module:: distutils.archive_util - :synopsis: Utility functions for creating archive files (tarballs, zip files, ...) - - -This module provides a few functions for creating archive files, such as -tarballs or zipfiles. - - -.. function:: make_archive(base_name, format[, root_dir=None, base_dir=None, verbose=0, dry_run=0]) - - Create an archive file (eg. ``zip`` or ``tar``). *base_name* is the name of - the file to create, minus any format-specific extension; *format* is the - archive format: one of ``zip``, ``tar``, ``gztar``, ``bztar``, ``xztar``, or - ``ztar``. *root_dir* is a directory that will be the root directory of the - archive; ie. we typically ``chdir`` into *root_dir* before creating the - archive. *base_dir* is the directory where we start archiving from; ie. - *base_dir* will be the common prefix of all files and directories in the - archive. *root_dir* and *base_dir* both default to the current directory. - Returns the name of the archive file. - - .. versionchanged:: 3.5 - Added support for the ``xztar`` format. - - -.. function:: make_tarball(base_name, base_dir[, compress='gzip', verbose=0, dry_run=0]) - - 'Create an (optional compressed) archive as a tar file from all files in and - under *base_dir*. *compress* must be ``'gzip'`` (the default), - ``'bzip2'``, ``'xz'``, ``'compress'``, or ``None``. For the ``'compress'`` - method the compression utility named by :program:`compress` must be on the - default program search path, so this is probably Unix-specific. The output - tar file will be named :file:`base_dir.tar`, possibly plus the appropriate - compression extension (``.gz``, ``.bz2``, ``.xz`` or ``.Z``). Return the - output filename. - - .. versionchanged:: 3.5 - Added support for the ``xz`` compression. - - -.. function:: make_zipfile(base_name, base_dir[, verbose=0, dry_run=0]) - - Create a zip file from all files in and under *base_dir*. The output zip file - will be named *base_name* + :file:`.zip`. Uses either the :mod:`zipfile` Python - module (if available) or the InfoZIP :file:`zip` utility (if installed and - found on the default search path). If neither tool is available, raises - :exc:`DistutilsExecError`. Returns the name of the output zip file. - - -:mod:`distutils.dep_util` --- Dependency checking -================================================= - -.. module:: distutils.dep_util - :synopsis: Utility functions for simple dependency checking - - -This module provides functions for performing simple, timestamp-based -dependency of files and groups of files; also, functions based entirely on such -timestamp dependency analysis. - - -.. function:: newer(source, target) - - Return true if *source* exists and is more recently modified than *target*, or - if *source* exists and *target* doesn't. Return false if both exist and *target* - is the same age or newer than *source*. Raise :exc:`DistutilsFileError` if - *source* does not exist. - - -.. function:: newer_pairwise(sources, targets) - - Walk two filename lists in parallel, testing if each source is newer than its - corresponding target. Return a pair of lists (*sources*, *targets*) where - source is newer than target, according to the semantics of :func:`newer`. - - .. % % equivalent to a listcomp... - - -.. function:: newer_group(sources, target[, missing='error']) - - Return true if *target* is out-of-date with respect to any file listed in - *sources*. In other words, if *target* exists and is newer than every file in - *sources*, return false; otherwise return true. *missing* controls what we do - when a source file is missing; the default (``'error'``) is to blow up with an - :exc:`OSError` from inside :func:`os.stat`; if it is ``'ignore'``, we silently - drop any missing source files; if it is ``'newer'``, any missing source files - make us assume that *target* is out-of-date (this is handy in "dry-run" mode: - it'll make you pretend to carry out commands that wouldn't work because inputs - are missing, but that doesn't matter because you're not actually going to run - the commands). - - -:mod:`distutils.dir_util` --- Directory tree operations -======================================================= - -.. module:: distutils.dir_util - :synopsis: Utility functions for operating on directories and directory trees - - -This module provides functions for operating on directories and trees of -directories. - - -.. function:: mkpath(name[, mode=0o777, verbose=0, dry_run=0]) - - Create a directory and any missing ancestor directories. If the directory - already exists (or if *name* is the empty string, which means the current - directory, which of course exists), then do nothing. Raise - :exc:`DistutilsFileError` if unable to create some directory along the way (eg. - some sub-path exists, but is a file rather than a directory). If *verbose* is - true, print a one-line summary of each mkdir to stdout. Return the list of - directories actually created. - - -.. function:: create_tree(base_dir, files[, mode=0o777, verbose=0, dry_run=0]) - - Create all the empty directories under *base_dir* needed to put *files* there. - *base_dir* is just the name of a directory which doesn't necessarily exist - yet; *files* is a list of filenames to be interpreted relative to *base_dir*. - *base_dir* + the directory portion of every file in *files* will be created if - it doesn't already exist. *mode*, *verbose* and *dry_run* flags are as for - :func:`mkpath`. - - -.. function:: copy_tree(src, dst[, preserve_mode=1, preserve_times=1, preserve_symlinks=0, update=0, verbose=0, dry_run=0]) - - Copy an entire directory tree *src* to a new location *dst*. Both *src* and - *dst* must be directory names. If *src* is not a directory, raise - :exc:`DistutilsFileError`. If *dst* does not exist, it is created with - :func:`mkpath`. The end result of the copy is that every file in *src* is - copied to *dst*, and directories under *src* are recursively copied to *dst*. - Return the list of files that were copied or might have been copied, using their - output name. The return value is unaffected by *update* or *dry_run*: it is - simply the list of all files under *src*, with the names changed to be under - *dst*. - - *preserve_mode* and *preserve_times* are the same as for - :func:`distutils.file_util.copy_file`; note that they only apply to - regular files, not to - directories. If *preserve_symlinks* is true, symlinks will be copied as - symlinks (on platforms that support them!); otherwise (the default), the - destination of the symlink will be copied. *update* and *verbose* are the same - as for :func:`copy_file`. - - Files in *src* that begin with :file:`.nfs` are skipped (more information on - these files is available in answer D2 of the `NFS FAQ page - `_). - - .. versionchanged:: 3.3.1 - NFS files are ignored. - -.. function:: remove_tree(directory[, verbose=0, dry_run=0]) - - Recursively remove *directory* and all files and directories underneath it. Any - errors are ignored (apart from being reported to ``sys.stdout`` if *verbose* is - true). - - -:mod:`distutils.file_util` --- Single file operations -===================================================== - -.. module:: distutils.file_util - :synopsis: Utility functions for operating on single files - - -This module contains some utility functions for operating on individual files. - - -.. function:: copy_file(src, dst[, preserve_mode=1, preserve_times=1, update=0, link=None, verbose=0, dry_run=0]) - - Copy file *src* to *dst*. If *dst* is a directory, then *src* is copied there - with the same name; otherwise, it must be a filename. (If the file exists, it - will be ruthlessly clobbered.) If *preserve_mode* is true (the default), the - file's mode (type and permission bits, or whatever is analogous on the - current platform) is copied. If *preserve_times* is true (the default), the - last-modified and last-access times are copied as well. If *update* is true, - *src* will only be copied if *dst* does not exist, or if *dst* does exist but - is older than *src*. - - *link* allows you to make hard links (using :func:`os.link`) or symbolic links - (using :func:`os.symlink`) instead of copying: set it to ``'hard'`` or - ``'sym'``; if it is ``None`` (the default), files are copied. Don't set *link* - on systems that don't support it: :func:`copy_file` doesn't check if hard or - symbolic linking is available. It uses :func:`_copy_file_contents` to copy file - contents. - - Return a tuple ``(dest_name, copied)``: *dest_name* is the actual name of the - output file, and *copied* is true if the file was copied (or would have been - copied, if *dry_run* true). - - .. % XXX if the destination file already exists, we clobber it if - .. % copying, but blow up if linking. Hmmm. And I don't know what - .. % macostools.copyfile() does. Should definitely be consistent, and - .. % should probably blow up if destination exists and we would be - .. % changing it (ie. it's not already a hard/soft link to src OR - .. % (not update) and (src newer than dst)). - - -.. function:: move_file(src, dst[, verbose, dry_run]) - - Move file *src* to *dst*. If *dst* is a directory, the file will be moved into - it with the same name; otherwise, *src* is just renamed to *dst*. Returns the - new full name of the file. - - .. warning:: - - Handles cross-device moves on Unix using :func:`copy_file`. What about - other systems? - - -.. function:: write_file(filename, contents) - - Create a file called *filename* and write *contents* (a sequence of strings - without line terminators) to it. - - -:mod:`distutils.util` --- Miscellaneous other utility functions -=============================================================== - -.. module:: distutils.util - :synopsis: Miscellaneous other utility functions - - -This module contains other assorted bits and pieces that don't fit into any -other utility module. - - -.. function:: get_platform() - - Return a string that identifies the current platform. This is used mainly to - distinguish platform-specific build directories and platform-specific built - distributions. Typically includes the OS name and version and the - architecture (as supplied by 'os.uname()'), although the exact information - included depends on the OS; e.g., on Linux, the kernel version isn't - particularly important. - - Examples of returned values: - - * ``linux-i586`` - * ``linux-alpha`` - * ``solaris-2.6-sun4u`` - - For non-POSIX platforms, currently just returns ``sys.platform``. - - For macOS systems the OS version reflects the minimal version on which - binaries will run (that is, the value of ``MACOSX_DEPLOYMENT_TARGET`` - during the build of Python), not the OS version of the current system. - - For universal binary builds on macOS the architecture value reflects - the universal binary status instead of the architecture of the current - processor. For 32-bit universal binaries the architecture is ``fat``, - for 64-bit universal binaries the architecture is ``fat64``, and - for 4-way universal binaries the architecture is ``universal``. Starting - from Python 2.7 and Python 3.2 the architecture ``fat3`` is used for - a 3-way universal build (ppc, i386, x86_64) and ``intel`` is used for - a universal build with the i386 and x86_64 architectures - - Examples of returned values on macOS: - - * ``macosx-10.3-ppc`` - - * ``macosx-10.3-fat`` - - * ``macosx-10.5-universal`` - - * ``macosx-10.6-intel`` - - For AIX, Python 3.9 and later return a string starting with "aix", followed - by additional fields (separated by ``'-'``) that represent the combined - values of AIX Version, Release and Technology Level (first field), Build Date - (second field), and bit-size (third field). Python 3.8 and earlier returned - only a single additional field with the AIX Version and Release. - - Examples of returned values on AIX: - - * ``aix-5307-0747-32`` # 32-bit build on AIX ``oslevel -s``: 5300-07-00-0000 - - * ``aix-7105-1731-64`` # 64-bit build on AIX ``oslevel -s``: 7100-05-01-1731 - - * ``aix-7.2`` # Legacy form reported in Python 3.8 and earlier - - .. versionchanged:: 3.9 - The AIX platform string format now also includes the technology level, - build date, and ABI bit-size. - - -.. function:: convert_path(pathname) - - Return 'pathname' as a name that will work on the native filesystem, i.e. split - it on '/' and put it back together again using the current directory separator. - Needed because filenames in the setup script are always supplied in Unix style, - and have to be converted to the local convention before we can actually use them - in the filesystem. Raises :exc:`ValueError` on non-Unix-ish systems if - *pathname* either starts or ends with a slash. - - -.. function:: change_root(new_root, pathname) - - Return *pathname* with *new_root* prepended. If *pathname* is relative, this is - equivalent to ``os.path.join(new_root,pathname)`` Otherwise, it requires making - *pathname* relative and then joining the two, which is tricky on DOS/Windows. - - -.. function:: check_environ() - - Ensure that 'os.environ' has all the environment variables we guarantee that - users can use in config files, command-line options, etc. Currently this - includes: - - * :envvar:`HOME` - user's home directory (Unix only) - * :envvar:`PLAT` - description of the current platform, including hardware and - OS (see :func:`get_platform`) - - -.. function:: subst_vars(s, local_vars) - - Perform shell/Perl-style variable substitution on *s*. Every occurrence of - ``$`` followed by a name is considered a variable, and variable is substituted - by the value found in the *local_vars* dictionary, or in ``os.environ`` if it's - not in *local_vars*. *os.environ* is first checked/augmented to guarantee that - it contains certain values: see :func:`check_environ`. Raise :exc:`ValueError` - for any variables not found in either *local_vars* or ``os.environ``. - - Note that this is not a full-fledged string interpolation function. A valid - ``$variable`` can consist only of upper and lower case letters, numbers and an - underscore. No { } or ( ) style quoting is available. - - -.. function:: split_quoted(s) - - Split a string up according to Unix shell-like rules for quotes and backslashes. - In short: words are delimited by spaces, as long as those spaces are not escaped - by a backslash, or inside a quoted string. Single and double quotes are - equivalent, and the quote characters can be backslash-escaped. The backslash is - stripped from any two-character escape sequence, leaving only the escaped - character. The quote characters are stripped from any quoted string. Returns a - list of words. - - .. % Should probably be moved into the standard library. - - -.. function:: execute(func, args[, msg=None, verbose=0, dry_run=0]) - - Perform some action that affects the outside world (for instance, writing to the - filesystem). Such actions are special because they are disabled by the - *dry_run* flag. This method takes care of all that bureaucracy for you; all - you have to do is supply the function to call and an argument tuple for it (to - embody the "external action" being performed), and an optional message to print. - - -.. function:: strtobool(val) - - Convert a string representation of truth to true (1) or false (0). - - True values are ``y``, ``yes``, ``t``, ``true``, ``on`` and ``1``; false values - are ``n``, ``no``, ``f``, ``false``, ``off`` and ``0``. Raises - :exc:`ValueError` if *val* is anything else. - - -.. function:: byte_compile(py_files[, optimize=0, force=0, prefix=None, base_dir=None, verbose=1, dry_run=0, direct=None]) - - Byte-compile a collection of Python source files to :file:`.pyc` files in a - :file:`__pycache__` subdirectory (see :pep:`3147` and :pep:`488`). - *py_files* is a list of files to compile; any files that don't end in - :file:`.py` are silently skipped. *optimize* must be one of the following: - - * ``0`` - don't optimize - * ``1`` - normal optimization (like ``python -O``) - * ``2`` - extra optimization (like ``python -OO``) - - If *force* is true, all files are recompiled regardless of timestamps. - - The source filename encoded in each :term:`bytecode` file defaults to the filenames - listed in *py_files*; you can modify these with *prefix* and *basedir*. - *prefix* is a string that will be stripped off of each source filename, and - *base_dir* is a directory name that will be prepended (after *prefix* is - stripped). You can supply either or both (or neither) of *prefix* and - *base_dir*, as you wish. - - If *dry_run* is true, doesn't actually do anything that would affect the - filesystem. - - Byte-compilation is either done directly in this interpreter process with the - standard :mod:`py_compile` module, or indirectly by writing a temporary script - and executing it. Normally, you should let :func:`byte_compile` figure out to - use direct compilation or not (see the source for details). The *direct* flag - is used by the script generated in indirect mode; unless you know what you're - doing, leave it set to ``None``. - - .. versionchanged:: 3.2.3 - Create ``.pyc`` files with an :func:`import magic tag - ` in their name, in a :file:`__pycache__` subdirectory - instead of files without tag in the current directory. - - .. versionchanged:: 3.5 - Create ``.pyc`` files according to :pep:`488`. - - -.. function:: rfc822_escape(header) - - Return a version of *header* escaped for inclusion in an :rfc:`822` header, by - ensuring there are 8 spaces space after each newline. Note that it does no other - modification of the string. - - .. % this _can_ be replaced - -.. % \subsection{Distutils objects} - - -:mod:`distutils.dist` --- The Distribution class -================================================ - -.. module:: distutils.dist - :synopsis: Provides the Distribution class, which represents the module distribution being - built/installed/distributed - - -This module provides the :class:`~distutils.core.Distribution` class, which -represents the module distribution being built/installed/distributed. - - -:mod:`distutils.extension` --- The Extension class -================================================== - -.. module:: distutils.extension - :synopsis: Provides the Extension class, used to describe C/C++ extension modules in setup - scripts - - -This module provides the :class:`Extension` class, used to describe C/C++ -extension modules in setup scripts. - -.. % \subsection{Ungrouped modules} -.. % The following haven't been moved into a more appropriate section yet. - - -:mod:`distutils.debug` --- Distutils debug mode -=============================================== - -.. module:: distutils.debug - :synopsis: Provides the debug flag for distutils - - -This module provides the DEBUG flag. - - -:mod:`distutils.errors` --- Distutils exceptions -================================================ - -.. module:: distutils.errors - :synopsis: Provides standard distutils exceptions - - -Provides exceptions used by the Distutils modules. Note that Distutils modules -may raise standard exceptions; in particular, SystemExit is usually raised for -errors that are obviously the end-user's fault (eg. bad command-line arguments). - -This module is safe to use in ``from ... import *`` mode; it only exports -symbols whose names start with ``Distutils`` and end with ``Error``. - - -:mod:`distutils.fancy_getopt` --- Wrapper around the standard getopt module -=========================================================================== - -.. module:: distutils.fancy_getopt - :synopsis: Additional getopt functionality - - -This module provides a wrapper around the standard :mod:`getopt` module that -provides the following additional features: - -* short and long options are tied together - -* options have help strings, so :func:`fancy_getopt` could potentially create a - complete usage summary - -* options set attributes of a passed-in object - -* boolean options can have "negative aliases" --- eg. if :option:`!--quiet` is - the "negative alias" of :option:`!--verbose`, then :option:`!--quiet` on the - command line sets *verbose* to false. - -.. function:: fancy_getopt(options, negative_opt, object, args) - - Wrapper function. *options* is a list of ``(long_option, short_option, - help_string)`` 3-tuples as described in the constructor for - :class:`FancyGetopt`. *negative_opt* should be a dictionary mapping option names - to option names, both the key and value should be in the *options* list. - *object* is an object which will be used to store values (see the :meth:`getopt` - method of the :class:`FancyGetopt` class). *args* is the argument list. Will use - ``sys.argv[1:]`` if you pass ``None`` as *args*. - - -.. function:: wrap_text(text, width) - - Wraps *text* to less than *width* wide. - - -.. class:: FancyGetopt([option_table=None]) - - The option_table is a list of 3-tuples: ``(long_option, short_option, - help_string)`` - - If an option takes an argument, its *long_option* should have ``'='`` appended; - *short_option* should just be a single character, no ``':'`` in any case. - *short_option* should be ``None`` if a *long_option* doesn't have a - corresponding *short_option*. All option tuples must have long options. - -The :class:`FancyGetopt` class provides the following methods: - - -.. method:: FancyGetopt.getopt([args=None, object=None]) - - Parse command-line options in args. Store as attributes on *object*. - - If *args* is ``None`` or not supplied, uses ``sys.argv[1:]``. If *object* is - ``None`` or not supplied, creates a new :class:`OptionDummy` instance, stores - option values there, and returns a tuple ``(args, object)``. If *object* is - supplied, it is modified in place and :func:`getopt` just returns *args*; in - both cases, the returned *args* is a modified copy of the passed-in *args* list, - which is left untouched. - - .. % and args returned are? - - -.. method:: FancyGetopt.get_option_order() - - Returns the list of ``(option, value)`` tuples processed by the previous run of - :meth:`getopt` Raises :exc:`RuntimeError` if :meth:`getopt` hasn't been called - yet. - - -.. method:: FancyGetopt.generate_help([header=None]) - - Generate help text (a list of strings, one per suggested line of output) from - the option table for this :class:`FancyGetopt` object. - - If supplied, prints the supplied *header* at the top of the help. - - -:mod:`distutils.filelist` --- The FileList class -================================================ - -.. module:: distutils.filelist - :synopsis: The FileList class, used for poking about the file system and - building lists of files. - - -This module provides the :class:`FileList` class, used for poking about the -filesystem and building lists of files. - - -:mod:`distutils.log` --- Simple :pep:`282`-style logging -======================================================== - -.. module:: distutils.log - :synopsis: A simple logging mechanism, :pep:`282`-style - - -:mod:`distutils.spawn` --- Spawn a sub-process -============================================== - -.. module:: distutils.spawn - :synopsis: Provides the spawn() function - - -This module provides the :func:`spawn` function, a front-end to various -platform-specific functions for launching another program in a sub-process. -Also provides :func:`find_executable` to search the path for a given executable -name. - - -:mod:`distutils.sysconfig` --- System configuration information -=============================================================== - -.. module:: distutils.sysconfig - :synopsis: Low-level access to configuration information of the Python interpreter. -.. deprecated:: 3.10 - :mod:`distutils.sysconfig` has been merged into :mod:`sysconfig`. -.. moduleauthor:: Fred L. Drake, Jr. -.. moduleauthor:: Greg Ward -.. sectionauthor:: Fred L. Drake, Jr. - - -The :mod:`distutils.sysconfig` module provides access to Python's low-level -configuration information. The specific configuration variables available -depend heavily on the platform and configuration. The specific variables depend -on the build process for the specific version of Python being run; the variables -are those found in the :file:`Makefile` and configuration header that are -installed with Python on Unix systems. The configuration header is called -:file:`pyconfig.h` for Python versions starting with 2.2, and :file:`config.h` -for earlier versions of Python. - -Some additional functions are provided which perform some useful manipulations -for other parts of the :mod:`distutils` package. - - -.. data:: PREFIX - - The result of ``os.path.normpath(sys.prefix)``. - - -.. data:: EXEC_PREFIX - - The result of ``os.path.normpath(sys.exec_prefix)``. - - -.. function:: get_config_var(name) - - Return the value of a single variable. This is equivalent to - ``get_config_vars().get(name)``. - - -.. function:: get_config_vars(...) - - Return a set of variable definitions. If there are no arguments, this returns a - dictionary mapping names of configuration variables to values. If arguments are - provided, they should be strings, and the return value will be a sequence giving - the associated values. If a given name does not have a corresponding value, - ``None`` will be included for that variable. - - -.. function:: get_config_h_filename() - - Return the full path name of the configuration header. For Unix, this will be - the header generated by the :program:`configure` script; for other platforms the - header will have been supplied directly by the Python source distribution. The - file is a platform-specific text file. - - -.. function:: get_makefile_filename() - - Return the full path name of the :file:`Makefile` used to build Python. For - Unix, this will be a file generated by the :program:`configure` script; the - meaning for other platforms will vary. The file is a platform-specific text - file, if it exists. This function is only useful on POSIX platforms. - -The following functions are deprecated together with this module and they -have no direct replacement. - - -.. function:: get_python_inc([plat_specific[, prefix]]) - - Return the directory for either the general or platform-dependent C include - files. If *plat_specific* is true, the platform-dependent include directory is - returned; if false or omitted, the platform-independent directory is returned. - If *prefix* is given, it is used as either the prefix instead of - :const:`PREFIX`, or as the exec-prefix instead of :const:`EXEC_PREFIX` if - *plat_specific* is true. - - -.. function:: get_python_lib([plat_specific[, standard_lib[, prefix]]]) - - Return the directory for either the general or platform-dependent library - installation. If *plat_specific* is true, the platform-dependent include - directory is returned; if false or omitted, the platform-independent directory - is returned. If *prefix* is given, it is used as either the prefix instead of - :const:`PREFIX`, or as the exec-prefix instead of :const:`EXEC_PREFIX` if - *plat_specific* is true. If *standard_lib* is true, the directory for the - standard library is returned rather than the directory for the installation of - third-party extensions. - -The following function is only intended for use within the :mod:`distutils` -package. - - -.. function:: customize_compiler(compiler) - - Do any platform-specific customization of a - :class:`distutils.ccompiler.CCompiler` instance. - - This function is only needed on Unix at this time, but should be called - consistently to support forward-compatibility. It inserts the information that - varies across Unix flavors and is stored in Python's :file:`Makefile`. This - information includes the selected compiler, compiler and linker options, and the - extension used by the linker for shared objects. - -This function is even more special-purpose, and should only be used from -Python's own build procedures. - - -.. function:: set_python_build() - - Inform the :mod:`distutils.sysconfig` module that it is being used as part of - the build process for Python. This changes a lot of relative locations for - files, allowing them to be located in the build area rather than in an installed - Python. - - -:mod:`distutils.text_file` --- The TextFile class -================================================= - -.. module:: distutils.text_file - :synopsis: Provides the TextFile class, a simple interface to text files - - -This module provides the :class:`TextFile` class, which gives an interface to -text files that (optionally) takes care of stripping comments, ignoring blank -lines, and joining lines with backslashes. - - -.. class:: TextFile([filename=None, file=None, **options]) - - This class provides a file-like object that takes care of all the things you - commonly want to do when processing a text file that has some line-by-line - syntax: strip comments (as long as ``#`` is your comment character), skip blank - lines, join adjacent lines by escaping the newline (ie. backslash at end of - line), strip leading and/or trailing whitespace. All of these are optional and - independently controllable. - - The class provides a :meth:`warn` method so you can generate warning messages - that report physical line number, even if the logical line in question spans - multiple physical lines. Also provides :meth:`unreadline` for implementing - line-at-a-time lookahead. - - :class:`TextFile` instances are create with either *filename*, *file*, or both. - :exc:`RuntimeError` is raised if both are ``None``. *filename* should be a - string, and *file* a file object (or something that provides :meth:`readline` - and :meth:`close` methods). It is recommended that you supply at least - *filename*, so that :class:`TextFile` can include it in warning messages. If - *file* is not supplied, :class:`TextFile` creates its own using the - :func:`open` built-in function. - - The options are all boolean, and affect the values returned by :meth:`readline` - - .. tabularcolumns:: |l|L|l| - - +------------------+--------------------------------+---------+ - | option name | description | default | - +==================+================================+=========+ - | *strip_comments* | strip from ``'#'`` to | true | - | | end-of-line, as well as any | | - | | whitespace leading up to the | | - | | ``'#'``\ ---unless it is | | - | | escaped by a backslash | | - +------------------+--------------------------------+---------+ - | *lstrip_ws* | strip leading whitespace from | false | - | | each line before returning it | | - +------------------+--------------------------------+---------+ - | *rstrip_ws* | strip trailing whitespace | true | - | | (including line terminator!) | | - | | from each line before | | - | | returning it. | | - +------------------+--------------------------------+---------+ - | *skip_blanks* | skip lines that are empty | true | - | | \*after\* stripping comments | | - | | and whitespace. (If both | | - | | lstrip_ws and rstrip_ws are | | - | | false, then some lines may | | - | | consist of solely whitespace: | | - | | these will \*not\* be skipped, | | - | | even if *skip_blanks* is | | - | | true.) | | - +------------------+--------------------------------+---------+ - | *join_lines* | if a backslash is the last | false | - | | non-newline character on a | | - | | line after stripping comments | | - | | and whitespace, join the | | - | | following line to it to form | | - | | one logical line; if N | | - | | consecutive lines end with a | | - | | backslash, then N+1 physical | | - | | lines will be joined to form | | - | | one logical line. | | - +------------------+--------------------------------+---------+ - | *collapse_join* | strip leading whitespace from | false | - | | lines that are joined to their | | - | | predecessor; only matters if | | - | | ``(join_lines and not | | - | | lstrip_ws)`` | | - +------------------+--------------------------------+---------+ - - Note that since *rstrip_ws* can strip the trailing newline, the semantics of - :meth:`readline` must differ from those of the built-in file object's - :meth:`readline` method! In particular, :meth:`readline` returns ``None`` for - end-of-file: an empty string might just be a blank line (or an all-whitespace - line), if *rstrip_ws* is true but *skip_blanks* is not. - - - .. method:: TextFile.open(filename) - - Open a new file *filename*. This overrides any *file* or *filename* - constructor arguments. - - - .. method:: TextFile.close() - - Close the current file and forget everything we know about it (including the - filename and the current line number). - - - .. method:: TextFile.warn(msg[,line=None]) - - Print (to stderr) a warning message tied to the current logical line in the - current file. If the current logical line in the file spans multiple physical - lines, the warning refers to the whole range, such as ``"lines 3-5"``. If - *line* is supplied, it overrides the current line number; it may be a list or - tuple to indicate a range of physical lines, or an integer for a single - physical line. - - - .. method:: TextFile.readline() - - Read and return a single logical line from the current file (or from an internal - buffer if lines have previously been "unread" with :meth:`unreadline`). If the - *join_lines* option is true, this may involve reading multiple physical lines - concatenated into a single string. Updates the current line number, so calling - :meth:`warn` after :meth:`readline` emits a warning about the physical line(s) - just read. Returns ``None`` on end-of-file, since the empty string can occur - if *rstrip_ws* is true but *strip_blanks* is not. - - - .. method:: TextFile.readlines() - - Read and return the list of all logical lines remaining in the current file. - This updates the current line number to the last line of the file. - - - .. method:: TextFile.unreadline(line) - - Push *line* (a string) onto an internal buffer that will be checked by future - :meth:`readline` calls. Handy for implementing a parser with line-at-a-time - lookahead. Note that lines that are "unread" with :meth:`unreadline` are not - subsequently re-cleansed (whitespace stripped, or whatever) when read with - :meth:`readline`. If multiple calls are made to :meth:`unreadline` before a call - to :meth:`readline`, the lines will be returned most in most recent first order. - - -:mod:`distutils.version` --- Version number classes -=================================================== - -.. module:: distutils.version - :synopsis: Implements classes that represent module version numbers. - - -.. % todo -.. % \section{Distutils Commands} -.. % -.. % This part of Distutils implements the various Distutils commands, such -.. % as \code{build}, \code{install} \&c. Each command is implemented as a -.. % separate module, with the command name as the name of the module. - - -:mod:`distutils.cmd` --- Abstract base class for Distutils commands -=================================================================== - -.. module:: distutils.cmd - :synopsis: Provides the abstract base class :class:`~distutils.cmd.Command`. This class - is subclassed by the modules in the distutils.command subpackage. - - -This module supplies the abstract base class :class:`Command`. - - -.. class:: Command(dist) - - Abstract base class for defining command classes, the "worker bees" of the - Distutils. A useful analogy for command classes is to think of them as - subroutines with local variables called *options*. The options are declared - in :meth:`initialize_options` and defined (given their final values) in - :meth:`finalize_options`, both of which must be defined by every command - class. The distinction between the two is necessary because option values - might come from the outside world (command line, config file, ...), and any - options dependent on other options must be computed after these outside - influences have been processed --- hence :meth:`finalize_options`. The body - of the subroutine, where it does all its work based on the values of its - options, is the :meth:`run` method, which must also be implemented by every - command class. - - The class constructor takes a single argument *dist*, a - :class:`~distutils.core.Distribution` instance. - - -Creating a new Distutils command -================================ - -This section outlines the steps to create a new Distutils command. - -A new command lives in a module in the :mod:`distutils.command` package. There -is a sample template in that directory called :file:`command_template`. Copy -this file to a new module with the same name as the new command you're -implementing. This module should implement a class with the same name as the -module (and the command). So, for instance, to create the command -``peel_banana`` (so that users can run ``setup.py peel_banana``), you'd copy -:file:`command_template` to :file:`distutils/command/peel_banana.py`, then edit -it so that it's implementing the class :class:`peel_banana`, a subclass of -:class:`distutils.cmd.Command`. - -Subclasses of :class:`Command` must define the following methods. - -.. method:: Command.initialize_options() - - Set default values for all the options that this command supports. Note that - these defaults may be overridden by other commands, by the setup script, by - config files, or by the command-line. Thus, this is not the place to code - dependencies between options; generally, :meth:`initialize_options` - implementations are just a bunch of ``self.foo = None`` assignments. - - -.. method:: Command.finalize_options() - - Set final values for all the options that this command supports. This is - always called as late as possible, ie. after any option assignments from the - command-line or from other commands have been done. Thus, this is the place - to code option dependencies: if *foo* depends on *bar*, then it is safe to - set *foo* from *bar* as long as *foo* still has the same value it was - assigned in :meth:`initialize_options`. - - -.. method:: Command.run() - - A command's raison d'etre: carry out the action it exists to perform, controlled - by the options initialized in :meth:`initialize_options`, customized by other - commands, the setup script, the command-line, and config files, and finalized in - :meth:`finalize_options`. All terminal output and filesystem interaction should - be done by :meth:`run`. - - -.. attribute:: Command.sub_commands - - *sub_commands* formalizes the notion of a "family" of commands, - e.g. ``install`` as the parent with sub-commands ``install_lib``, - ``install_headers``, etc. The parent of a family of commands defines - *sub_commands* as a class attribute; it's a list of 2-tuples ``(command_name, - predicate)``, with *command_name* a string and *predicate* a function, a - string or ``None``. *predicate* is a method of the parent command that - determines whether the corresponding command is applicable in the current - situation. (E.g. ``install_headers`` is only applicable if we have any C - header files to install.) If *predicate* is ``None``, that command is always - applicable. - - *sub_commands* is usually defined at the *end* of a class, because - predicates can be methods of the class, so they must already have been - defined. The canonical example is the :command:`install` command. - - -:mod:`distutils.command` --- Individual Distutils commands -========================================================== - -.. module:: distutils.command - :synopsis: Contains one module for each standard Distutils command. - - -.. % \subsubsection{Individual Distutils commands} -.. % todo - - -:mod:`distutils.command.bdist` --- Build a binary installer -=========================================================== - -.. module:: distutils.command.bdist - :synopsis: Build a binary installer for a package - - -.. % todo - - -:mod:`distutils.command.bdist_packager` --- Abstract base class for packagers -============================================================================= - -.. module:: distutils.command.bdist_packager - :synopsis: Abstract base class for packagers - - -.. % todo - - -:mod:`distutils.command.bdist_dumb` --- Build a "dumb" installer -================================================================ - -.. module:: distutils.command.bdist_dumb - :synopsis: Build a "dumb" installer - a simple archive of files - - -.. % todo - - -:mod:`distutils.command.bdist_rpm` --- Build a binary distribution as a Redhat RPM and SRPM -=========================================================================================== - -.. module:: distutils.command.bdist_rpm - :synopsis: Build a binary distribution as a Redhat RPM and SRPM - - -.. % todo - - -:mod:`distutils.command.sdist` --- Build a source distribution -============================================================== - -.. module:: distutils.command.sdist - :synopsis: Build a source distribution - - -.. % todo - - -:mod:`distutils.command.build` --- Build all files of a package -=============================================================== - -.. module:: distutils.command.build - :synopsis: Build all files of a package - - -.. % todo - - -:mod:`distutils.command.build_clib` --- Build any C libraries in a package -========================================================================== - -.. module:: distutils.command.build_clib - :synopsis: Build any C libraries in a package - - -.. % todo - - -:mod:`distutils.command.build_ext` --- Build any extensions in a package -======================================================================== - -.. module:: distutils.command.build_ext - :synopsis: Build any extensions in a package - - -.. % todo - - -:mod:`distutils.command.build_py` --- Build the .py/.pyc files of a package -=========================================================================== - -.. module:: distutils.command.build_py - :synopsis: Build the .py/.pyc files of a package - - -.. class:: build_py - -.. class:: build_py_2to3 - - Alternative implementation of build_py which also runs the - 2to3 conversion library on each .py file that is going to be - installed. To use this in a setup.py file for a distribution - that is designed to run with both Python 2.x and 3.x, add:: - - try: - from distutils.command.build_py import build_py_2to3 as build_py - except ImportError: - from distutils.command.build_py import build_py - - to your setup.py, and later:: - - cmdclass = {'build_py': build_py} - - to the invocation of setup(). - - -:mod:`distutils.command.build_scripts` --- Build the scripts of a package -========================================================================= - -.. module:: distutils.command.build_scripts - :synopsis: Build the scripts of a package - - -.. % todo - - -:mod:`distutils.command.clean` --- Clean a package build area -============================================================= - -.. module:: distutils.command.clean - :synopsis: Clean a package build area - -This command removes the temporary files created by :command:`build` -and its subcommands, like intermediary compiled object files. With -the ``--all`` option, the complete build directory will be removed. - -Extension modules built :ref:`in place ` -will not be cleaned, as they are not in the build directory. - - -:mod:`distutils.command.config` --- Perform package configuration -================================================================= - -.. module:: distutils.command.config - :synopsis: Perform package configuration - - -.. % todo - - -:mod:`distutils.command.install` --- Install a package -====================================================== - -.. module:: distutils.command.install - :synopsis: Install a package - - -.. % todo - - -:mod:`distutils.command.install_data` --- Install data files from a package -=========================================================================== - -.. module:: distutils.command.install_data - :synopsis: Install data files from a package - - -.. % todo - - -:mod:`distutils.command.install_headers` --- Install C/C++ header files from a package -====================================================================================== - -.. module:: distutils.command.install_headers - :synopsis: Install C/C++ header files from a package - - -.. % todo - - -:mod:`distutils.command.install_lib` --- Install library files from a package -============================================================================= - -.. module:: distutils.command.install_lib - :synopsis: Install library files from a package - - -.. % todo - - -:mod:`distutils.command.install_scripts` --- Install script files from a package -================================================================================ - -.. module:: distutils.command.install_scripts - :synopsis: Install script files from a package - - -.. % todo - - -:mod:`distutils.command.register` --- Register a module with the Python Package Index -===================================================================================== - -.. module:: distutils.command.register - :synopsis: Register a module with the Python Package Index - - -The ``register`` command registers the package with the Python Package Index. -This is described in more detail in :pep:`301`. - -.. % todo - - -:mod:`distutils.command.check` --- Check the meta-data of a package -=================================================================== - -.. module:: distutils.command.check - :synopsis: Check the meta-data of a package - - -The ``check`` command performs some tests on the meta-data of a package. -For example, it verifies that all required meta-data are provided as -the arguments passed to the :func:`setup` function. - -.. % todo diff --git a/Doc/distutils/builtdist.rst b/Doc/distutils/builtdist.rst deleted file mode 100644 index c1d9ea533da..00000000000 --- a/Doc/distutils/builtdist.rst +++ /dev/null @@ -1,392 +0,0 @@ -.. _built-dist: - -**************************** -Creating Built Distributions -**************************** - -.. include:: ./_setuptools_disclaimer.rst - -A "built distribution" is what you're probably used to thinking of either as a -"binary package" or an "installer" (depending on your background). It's not -necessarily binary, though, because it might contain only Python source code -and/or byte-code; and we don't call it a package, because that word is already -spoken for in Python. (And "installer" is a term specific to the world of -mainstream desktop systems.) - -A built distribution is how you make life as easy as possible for installers of -your module distribution: for users of RPM-based Linux systems, it's a binary -RPM; for Windows users, it's an executable installer; for Debian-based Linux -users, it's a Debian package; and so forth. Obviously, no one person will be -able to create built distributions for every platform under the sun, so the -Distutils are designed to enable module developers to concentrate on their -specialty---writing code and creating source distributions---while an -intermediary species called *packagers* springs up to turn source distributions -into built distributions for as many platforms as there are packagers. - -Of course, the module developer could be their own packager; or the packager could -be a volunteer "out there" somewhere who has access to a platform which the -original developer does not; or it could be software periodically grabbing new -source distributions and turning them into built distributions for as many -platforms as the software has access to. Regardless of who they are, a packager -uses the setup script and the :command:`bdist` command family to generate built -distributions. - -As a simple example, if I run the following command in the Distutils source -tree:: - - python setup.py bdist - -then the Distutils builds my module distribution (the Distutils itself in this -case), does a "fake" installation (also in the :file:`build` directory), and -creates the default type of built distribution for my platform. The default -format for built distributions is a "dumb" tar file on Unix, and a simple -executable installer on Windows. (That tar file is considered "dumb" because it -has to be unpacked in a specific location to work.) - -Thus, the above command on a Unix system creates -:file:`Distutils-1.0.{plat}.tar.gz`; unpacking this tarball from the right place -installs the Distutils just as though you had downloaded the source distribution -and run ``python setup.py install``. (The "right place" is either the root of -the filesystem or Python's :file:`{prefix}` directory, depending on the options -given to the :command:`bdist_dumb` command; the default is to make dumb -distributions relative to :file:`{prefix}`.) - -Obviously, for pure Python distributions, this isn't any simpler than just -running ``python setup.py install``\ ---but for non-pure distributions, which -include extensions that would need to be compiled, it can mean the difference -between someone being able to use your extensions or not. And creating "smart" -built distributions, such as an RPM package or an executable installer for -Windows, is far more convenient for users even if your distribution doesn't -include any extensions. - -The :command:`bdist` command has a :option:`!--formats` option, similar to the -:command:`sdist` command, which you can use to select the types of built -distribution to generate: for example, :: - - python setup.py bdist --format=zip - -would, when run on a Unix system, create -:file:`Distutils-1.0.{plat}.zip`\ ---again, this archive would be unpacked -from the root directory to install the Distutils. - -The available formats for built distributions are: - -+-------------+------------------------------+---------+ -| Format | Description | Notes | -+=============+==============================+=========+ -| ``gztar`` | gzipped tar file | \(1) | -| | (:file:`.tar.gz`) | | -+-------------+------------------------------+---------+ -| ``bztar`` | bzipped tar file | | -| | (:file:`.tar.bz2`) | | -+-------------+------------------------------+---------+ -| ``xztar`` | xzipped tar file | | -| | (:file:`.tar.xz`) | | -+-------------+------------------------------+---------+ -| ``ztar`` | compressed tar file | \(3) | -| | (:file:`.tar.Z`) | | -+-------------+------------------------------+---------+ -| ``tar`` | tar file (:file:`.tar`) | | -+-------------+------------------------------+---------+ -| ``zip`` | zip file (:file:`.zip`) | (2),(4) | -+-------------+------------------------------+---------+ -| ``rpm`` | RPM | \(5) | -+-------------+------------------------------+---------+ -| ``pkgtool`` | Solaris :program:`pkgtool` | | -+-------------+------------------------------+---------+ -| ``sdux`` | HP-UX :program:`swinstall` | | -+-------------+------------------------------+---------+ -| ``msi`` | Microsoft Installer. | | -+-------------+------------------------------+---------+ - -.. versionchanged:: 3.5 - Added support for the ``xztar`` format. - - -Notes: - -(1) - default on Unix - -(2) - default on Windows - -(3) - requires external :program:`compress` utility. - -(4) - requires either external :program:`zip` utility or :mod:`zipfile` module (part - of the standard Python library since Python 1.6) - -(5) - requires external :program:`rpm` utility, version 3.0.4 or better (use ``rpm - --version`` to find out which version you have) - -You don't have to use the :command:`bdist` command with the :option:`!--formats` -option; you can also use the command that directly implements the format you're -interested in. Some of these :command:`bdist` "sub-commands" actually generate -several similar formats; for instance, the :command:`bdist_dumb` command -generates all the "dumb" archive formats (``tar``, ``gztar``, ``bztar``, -``xztar``, ``ztar``, and ``zip``), and :command:`bdist_rpm` generates both -binary and source RPMs. The :command:`bdist` sub-commands, and the formats -generated by each, are: - -+--------------------------+-------------------------------------+ -| Command | Formats | -+==========================+=====================================+ -| :command:`bdist_dumb` | tar, gztar, bztar, xztar, ztar, zip | -+--------------------------+-------------------------------------+ -| :command:`bdist_rpm` | rpm, srpm | -+--------------------------+-------------------------------------+ - -The following sections give details on the individual :command:`bdist_\*` -commands. - - -.. .. _creating-dumb: - -.. Creating dumb built distributions -.. ================================= - -.. XXX Need to document absolute vs. prefix-relative packages here, but first - I have to implement it! - - -.. _creating-rpms: - -Creating RPM packages -===================== - -The RPM format is used by many popular Linux distributions, including Red Hat, -SuSE, and Mandrake. If one of these (or any of the other RPM-based Linux -distributions) is your usual environment, creating RPM packages for other users -of that same distribution is trivial. Depending on the complexity of your module -distribution and differences between Linux distributions, you may also be able -to create RPMs that work on different RPM-based distributions. - -The usual way to create an RPM of your module distribution is to run the -:command:`bdist_rpm` command:: - - python setup.py bdist_rpm - -or the :command:`bdist` command with the :option:`!--format` option:: - - python setup.py bdist --formats=rpm - -The former allows you to specify RPM-specific options; the latter allows you to -easily specify multiple formats in one run. If you need to do both, you can -explicitly specify multiple :command:`bdist_\*` commands and their options:: - - python setup.py bdist_rpm --packager="John Doe " - -Creating RPM packages is driven by a :file:`.spec` file, much as using the -Distutils is driven by the setup script. To make your life easier, the -:command:`bdist_rpm` command normally creates a :file:`.spec` file based on the -information you supply in the setup script, on the command line, and in any -Distutils configuration files. Various options and sections in the -:file:`.spec` file are derived from options in the setup script as follows: - -+------------------------------------------+----------------------------------------------+ -| RPM :file:`.spec` file option or section | Distutils setup script option | -+==========================================+==============================================+ -| Name | ``name`` | -+------------------------------------------+----------------------------------------------+ -| Summary (in preamble) | ``description`` | -+------------------------------------------+----------------------------------------------+ -| Version | ``version`` | -+------------------------------------------+----------------------------------------------+ -| Vendor | ``author`` and ``author_email``, | -| | or --- & ``maintainer`` and | -| | ``maintainer_email`` | -+------------------------------------------+----------------------------------------------+ -| Copyright | ``license`` | -+------------------------------------------+----------------------------------------------+ -| Url | ``url`` | -+------------------------------------------+----------------------------------------------+ -| %description (section) | ``long_description`` | -+------------------------------------------+----------------------------------------------+ - -Additionally, there are many options in :file:`.spec` files that don't have -corresponding options in the setup script. Most of these are handled through -options to the :command:`bdist_rpm` command as follows: - -+-------------------------------+-----------------------------+-------------------------+ -| RPM :file:`.spec` file option | :command:`bdist_rpm` option | default value | -| or section | | | -+===============================+=============================+=========================+ -| Release | ``release`` | "1" | -+-------------------------------+-----------------------------+-------------------------+ -| Group | ``group`` | "Development/Libraries" | -+-------------------------------+-----------------------------+-------------------------+ -| Vendor | ``vendor`` | (see above) | -+-------------------------------+-----------------------------+-------------------------+ -| Packager | ``packager`` | (none) | -+-------------------------------+-----------------------------+-------------------------+ -| Provides | ``provides`` | (none) | -+-------------------------------+-----------------------------+-------------------------+ -| Requires | ``requires`` | (none) | -+-------------------------------+-----------------------------+-------------------------+ -| Conflicts | ``conflicts`` | (none) | -+-------------------------------+-----------------------------+-------------------------+ -| Obsoletes | ``obsoletes`` | (none) | -+-------------------------------+-----------------------------+-------------------------+ -| Distribution | ``distribution_name`` | (none) | -+-------------------------------+-----------------------------+-------------------------+ -| BuildRequires | ``build_requires`` | (none) | -+-------------------------------+-----------------------------+-------------------------+ -| Icon | ``icon`` | (none) | -+-------------------------------+-----------------------------+-------------------------+ - -Obviously, supplying even a few of these options on the command-line would be -tedious and error-prone, so it's usually best to put them in the setup -configuration file, :file:`setup.cfg`\ ---see section :ref:`setup-config`. If -you distribute or package many Python module distributions, you might want to -put options that apply to all of them in your personal Distutils configuration -file (:file:`~/.pydistutils.cfg`). If you want to temporarily disable -this file, you can pass the :option:`!--no-user-cfg` option to :file:`setup.py`. - -There are three steps to building a binary RPM package, all of which are -handled automatically by the Distutils: - -#. create a :file:`.spec` file, which describes the package (analogous to the - Distutils setup script; in fact, much of the information in the setup script - winds up in the :file:`.spec` file) - -#. create the source RPM - -#. create the "binary" RPM (which may or may not contain binary code, depending - on whether your module distribution contains Python extensions) - -Normally, RPM bundles the last two steps together; when you use the Distutils, -all three steps are typically bundled together. - -If you wish, you can separate these three steps. You can use the -:option:`!--spec-only` option to make :command:`bdist_rpm` just create the -:file:`.spec` file and exit; in this case, the :file:`.spec` file will be -written to the "distribution directory"---normally :file:`dist/`, but -customizable with the :option:`!--dist-dir` option. (Normally, the :file:`.spec` -file winds up deep in the "build tree," in a temporary directory created by -:command:`bdist_rpm`.) - -.. % \XXX{this isn't implemented yet---is it needed?!} -.. % You can also specify a custom \file{.spec} file with the -.. % \longprogramopt{spec-file} option; used in conjunction with -.. % \longprogramopt{spec-only}, this gives you an opportunity to customize -.. % the \file{.spec} file manually: -.. % -.. % \ begin{verbatim} -.. % > python setup.py bdist_rpm --spec-only -.. % # ...edit dist/FooBar-1.0.spec -.. % > python setup.py bdist_rpm --spec-file=dist/FooBar-1.0.spec -.. % \ end{verbatim} -.. % -.. % (Although a better way to do this is probably to override the standard -.. % \command{bdist\_rpm} command with one that writes whatever else you want -.. % to the \file{.spec} file.) - - -.. _cross-compile-windows: - -Cross-compiling on Windows -========================== - -Starting with Python 2.6, distutils is capable of cross-compiling between -Windows platforms. In practice, this means that with the correct tools -installed, you can use a 32bit version of Windows to create 64bit extensions -and vice-versa. - -To build for an alternate platform, specify the :option:`!--plat-name` option -to the build command. Valid values are currently 'win32', and 'win-amd64'. -For example, on a 32bit version of Windows, you could execute:: - - python setup.py build --plat-name=win-amd64 - -to build a 64bit version of your extension. - -would create a 64bit installation executable on your 32bit version of Windows. - -To cross-compile, you must download the Python source code and cross-compile -Python itself for the platform you are targeting - it is not possible from a -binary installation of Python (as the .lib etc file for other platforms are -not included.) In practice, this means the user of a 32 bit operating -system will need to use Visual Studio 2008 to open the -:file:`PCbuild/PCbuild.sln` solution in the Python source tree and build the -"x64" configuration of the 'pythoncore' project before cross-compiling -extensions is possible. - -Note that by default, Visual Studio 2008 does not install 64bit compilers or -tools. You may need to reexecute the Visual Studio setup process and select -these tools (using Control Panel->[Add/Remove] Programs is a convenient way to -check or modify your existing install.) - -.. _postinstallation-script: - -The Postinstallation script ---------------------------- - -Starting with Python 2.3, a postinstallation script can be specified with the -:option:`!--install-script` option. The basename of the script must be -specified, and the script filename must also be listed in the scripts argument -to the setup function. - -This script will be run at installation time on the target system after all the -files have been copied, with ``argv[1]`` set to :option:`!-install`, and again at -uninstallation time before the files are removed with ``argv[1]`` set to -:option:`!-remove`. - -The installation script runs embedded in the windows installer, every output -(``sys.stdout``, ``sys.stderr``) is redirected into a buffer and will be -displayed in the GUI after the script has finished. - -Some functions especially useful in this context are available as additional -built-in functions in the installation script. - - -.. function:: directory_created(path) - file_created(path) - - These functions should be called when a directory or file is created by the - postinstall script at installation time. It will register *path* with the - uninstaller, so that it will be removed when the distribution is uninstalled. - To be safe, directories are only removed if they are empty. - - -.. function:: get_special_folder_path(csidl_string) - - This function can be used to retrieve special folder locations on Windows like - the Start Menu or the Desktop. It returns the full path to the folder. - *csidl_string* must be one of the following strings:: - - "CSIDL_APPDATA" - - "CSIDL_COMMON_STARTMENU" - "CSIDL_STARTMENU" - - "CSIDL_COMMON_DESKTOPDIRECTORY" - "CSIDL_DESKTOPDIRECTORY" - - "CSIDL_COMMON_STARTUP" - "CSIDL_STARTUP" - - "CSIDL_COMMON_PROGRAMS" - "CSIDL_PROGRAMS" - - "CSIDL_FONTS" - - If the folder cannot be retrieved, :exc:`OSError` is raised. - - Which folders are available depends on the exact Windows version, and probably - also the configuration. For details refer to Microsoft's documentation of the - :c:func:`SHGetSpecialFolderPath` function. - - -.. function:: create_shortcut(target, description, filename[, arguments[, workdir[, iconpath[, iconindex]]]]) - - This function creates a shortcut. *target* is the path to the program to be - started by the shortcut. *description* is the description of the shortcut. - *filename* is the title of the shortcut that the user will see. *arguments* - specifies the command line arguments, if any. *workdir* is the working directory - for the program. *iconpath* is the file containing the icon for the shortcut, - and *iconindex* is the index of the icon in the file *iconpath*. Again, for - details consult the Microsoft documentation for the :class:`IShellLink` - interface. diff --git a/Doc/distutils/commandref.rst b/Doc/distutils/commandref.rst deleted file mode 100644 index 3e247e68d3a..00000000000 --- a/Doc/distutils/commandref.rst +++ /dev/null @@ -1,105 +0,0 @@ -.. _reference: - -***************** -Command Reference -***************** - -.. include:: ./_setuptools_disclaimer.rst - -.. % \section{Building modules: the \protect\command{build} command family} -.. % \label{build-cmds} -.. % \subsubsection{\protect\command{build}} -.. % \label{build-cmd} -.. % \subsubsection{\protect\command{build\_py}} -.. % \label{build-py-cmd} -.. % \subsubsection{\protect\command{build\_ext}} -.. % \label{build-ext-cmd} -.. % \subsubsection{\protect\command{build\_clib}} -.. % \label{build-clib-cmd} - - -.. _install-cmd: - -Installing modules: the :command:`install` command family -========================================================= - -The install command ensures that the build commands have been run and then runs -the subcommands :command:`install_lib`, :command:`install_data` and -:command:`install_scripts`. - -.. % \subsubsection{\protect\command{install\_lib}} -.. % \label{install-lib-cmd} - - -.. _install-data-cmd: - -:command:`install_data` ------------------------ - -This command installs all data files provided with the distribution. - - -.. _install-scripts-cmd: - -:command:`install_scripts` --------------------------- - -This command installs all (Python) scripts in the distribution. - -.. % \subsection{Cleaning up: the \protect\command{clean} command} -.. % \label{clean-cmd} - - -.. _sdist-cmd: - -Creating a source distribution: the :command:`sdist` command -============================================================ - -.. XXX fragment moved down from above: needs context! - -The manifest template commands are: - -+-------------------------------------------+-----------------------------------------------+ -| Command | Description | -+===========================================+===============================================+ -| :command:`include pat1 pat2 ...` | include all files matching any of the listed | -| | patterns | -+-------------------------------------------+-----------------------------------------------+ -| :command:`exclude pat1 pat2 ...` | exclude all files matching any of the listed | -| | patterns | -+-------------------------------------------+-----------------------------------------------+ -| :command:`recursive-include dir pat1 pat2 | include all files under *dir* matching any of | -| ...` | the listed patterns | -+-------------------------------------------+-----------------------------------------------+ -| :command:`recursive-exclude dir pat1 pat2 | exclude all files under *dir* matching any of | -| ...` | the listed patterns | -+-------------------------------------------+-----------------------------------------------+ -| :command:`global-include pat1 pat2 ...` | include all files anywhere in the source tree | -| | matching --- & any of the listed patterns | -+-------------------------------------------+-----------------------------------------------+ -| :command:`global-exclude pat1 pat2 ...` | exclude all files anywhere in the source tree | -| | matching --- & any of the listed patterns | -+-------------------------------------------+-----------------------------------------------+ -| :command:`prune dir` | exclude all files under *dir* | -+-------------------------------------------+-----------------------------------------------+ -| :command:`graft dir` | include all files under *dir* | -+-------------------------------------------+-----------------------------------------------+ - -The patterns here are Unix-style "glob" patterns: ``*`` matches any sequence of -regular filename characters, ``?`` matches any single regular filename -character, and ``[range]`` matches any of the characters in *range* (e.g., -``a-z``, ``a-zA-Z``, ``a-f0-9_.``). The definition of "regular filename -character" is platform-specific: on Unix it is anything except slash; on Windows -anything except backslash or colon. - -.. XXX Windows support not there yet - -.. % \section{Creating a built distribution: the -.. % \protect\command{bdist} command family} -.. % \label{bdist-cmds} - -.. % \subsection{\protect\command{bdist}} -.. % \subsection{\protect\command{bdist\_dumb}} -.. % \subsection{\protect\command{bdist\_rpm}} - - diff --git a/Doc/distutils/configfile.rst b/Doc/distutils/configfile.rst deleted file mode 100644 index 2a5c8329e31..00000000000 --- a/Doc/distutils/configfile.rst +++ /dev/null @@ -1,144 +0,0 @@ -.. _setup-config: - -************************************ -Writing the Setup Configuration File -************************************ - -.. include:: ./_setuptools_disclaimer.rst - -Often, it's not possible to write down everything needed to build a distribution -*a priori*: you may need to get some information from the user, or from the -user's system, in order to proceed. As long as that information is fairly -simple---a list of directories to search for C header files or libraries, for -example---then providing a configuration file, :file:`setup.cfg`, for users to -edit is a cheap and easy way to solicit it. Configuration files also let you -provide default values for any command option, which the installer can then -override either on the command-line or by editing the config file. - -The setup configuration file is a useful middle-ground between the setup -script---which, ideally, would be opaque to installers [#]_---and the command-line to -the setup script, which is outside of your control and entirely up to the -installer. In fact, :file:`setup.cfg` (and any other Distutils configuration -files present on the target system) are processed after the contents of the -setup script, but before the command-line. This has several useful -consequences: - -.. % (If you have more advanced needs, such as determining which extensions -.. % to build based on what capabilities are present on the target system, -.. % then you need the Distutils ``auto-configuration'' facility. This -.. % started to appear in Distutils 0.9 but, as of this writing, isn't mature -.. % or stable enough yet for real-world use.) - -* installers can override some of what you put in :file:`setup.py` by editing - :file:`setup.cfg` - -* you can provide non-standard defaults for options that are not easily set in - :file:`setup.py` - -* installers can override anything in :file:`setup.cfg` using the command-line - options to :file:`setup.py` - -The basic syntax of the configuration file is simple: - -.. code-block:: ini - - [command] - option=value - ... - -where *command* is one of the Distutils commands (e.g. :command:`build_py`, -:command:`install`), and *option* is one of the options that command supports. -Any number of options can be supplied for each command, and any number of -command sections can be included in the file. Blank lines are ignored, as are -comments, which run from a ``'#'`` character until the end of the line. Long -option values can be split across multiple lines simply by indenting the -continuation lines. - -You can find out the list of options supported by a particular command with the -universal :option:`!--help` option, e.g. - -.. code-block:: shell-session - - $ python setup.py --help build_ext - [...] - Options for 'build_ext' command: - --build-lib (-b) directory for compiled extension modules - --build-temp (-t) directory for temporary files (build by-products) - --inplace (-i) ignore build-lib and put compiled extensions into the - source directory alongside your pure Python modules - --include-dirs (-I) list of directories to search for header files - --define (-D) C preprocessor macros to define - --undef (-U) C preprocessor macros to undefine - --swig-opts list of SWIG command line options - [...] - -Note that an option spelled :option:`!--foo-bar` on the command-line is spelled -``foo_bar`` in configuration files. - -.. _distutils-build-ext-inplace: - -For example, say you want your extensions to be built "in-place"---that is, you -have an extension :mod:`pkg.ext`, and you want the compiled extension file -(:file:`ext.so` on Unix, say) to be put in the same source directory as your -pure Python modules :mod:`pkg.mod1` and :mod:`pkg.mod2`. You can always use the -:option:`!--inplace` option on the command-line to ensure this: - -.. code-block:: sh - - python setup.py build_ext --inplace - -But this requires that you always specify the :command:`build_ext` command -explicitly, and remember to provide :option:`!--inplace`. An easier way is to -"set and forget" this option, by encoding it in :file:`setup.cfg`, the -configuration file for this distribution: - -.. code-block:: ini - - [build_ext] - inplace=1 - -This will affect all builds of this module distribution, whether or not you -explicitly specify :command:`build_ext`. If you include :file:`setup.cfg` in -your source distribution, it will also affect end-user builds---which is -probably a bad idea for this option, since always building extensions in-place -would break installation of the module distribution. In certain peculiar cases, -though, modules are built right in their installation directory, so this is -conceivably a useful ability. (Distributing extensions that expect to be built -in their installation directory is almost always a bad idea, though.) - -Another example: certain commands take a lot of options that don't change from -run to run; for example, :command:`bdist_rpm` needs to know everything required -to generate a "spec" file for creating an RPM distribution. Some of this -information comes from the setup script, and some is automatically generated by -the Distutils (such as the list of files installed). But some of it has to be -supplied as options to :command:`bdist_rpm`, which would be very tedious to do -on the command-line for every run. Hence, here is a snippet from the Distutils' -own :file:`setup.cfg`: - -.. code-block:: ini - - [bdist_rpm] - release = 1 - packager = Greg Ward - doc_files = CHANGES.txt - README.txt - USAGE.txt - doc/ - examples/ - -Note that the ``doc_files`` option is simply a whitespace-separated string -split across multiple lines for readability. - - -.. seealso:: - - :ref:`inst-config-syntax` in "Installing Python Modules" - More information on the configuration files is available in the manual for - system administrators. - - -.. rubric:: Footnotes - -.. [#] This ideal probably won't be achieved until auto-configuration is fully - supported by the Distutils. - diff --git a/Doc/distutils/examples.rst b/Doc/distutils/examples.rst deleted file mode 100644 index e492b7f6057..00000000000 --- a/Doc/distutils/examples.rst +++ /dev/null @@ -1,340 +0,0 @@ -.. _distutils_examples: - -****************** -Distutils Examples -****************** - -.. include:: ./_setuptools_disclaimer.rst - -This chapter provides a number of basic examples to help get started with -distutils. Additional information about using distutils can be found in the -Distutils Cookbook. - - -.. seealso:: - - `Distutils Cookbook `_ - Collection of recipes showing how to achieve more control over distutils. - - -.. _pure-mod: - -Pure Python distribution (by module) -==================================== - -If you're just distributing a couple of modules, especially if they don't live -in a particular package, you can specify them individually using the -``py_modules`` option in the setup script. - -In the simplest case, you'll have two files to worry about: a setup script and -the single module you're distributing, :file:`foo.py` in this example:: - - / - setup.py - foo.py - -(In all diagrams in this section, ** will refer to the distribution root -directory.) A minimal setup script to describe this situation would be:: - - from distutils.core import setup - setup(name='foo', - version='1.0', - py_modules=['foo'], - ) - -Note that the name of the distribution is specified independently with the -``name`` option, and there's no rule that says it has to be the same as -the name of the sole module in the distribution (although that's probably a good -convention to follow). However, the distribution name is used to generate -filenames, so you should stick to letters, digits, underscores, and hyphens. - -Since ``py_modules`` is a list, you can of course specify multiple -modules, eg. if you're distributing modules :mod:`foo` and :mod:`bar`, your -setup might look like this:: - - / - setup.py - foo.py - bar.py - -and the setup script might be :: - - from distutils.core import setup - setup(name='foobar', - version='1.0', - py_modules=['foo', 'bar'], - ) - -You can put module source files into another directory, but if you have enough -modules to do that, it's probably easier to specify modules by package rather -than listing them individually. - - -.. _pure-pkg: - -Pure Python distribution (by package) -===================================== - -If you have more than a couple of modules to distribute, especially if they are -in multiple packages, it's probably easier to specify whole packages rather than -individual modules. This works even if your modules are not in a package; you -can just tell the Distutils to process modules from the root package, and that -works the same as any other package (except that you don't have to have an -:file:`__init__.py` file). - -The setup script from the last example could also be written as :: - - from distutils.core import setup - setup(name='foobar', - version='1.0', - packages=[''], - ) - -(The empty string stands for the root package.) - -If those two files are moved into a subdirectory, but remain in the root -package, e.g.:: - - / - setup.py - src/ foo.py - bar.py - -then you would still specify the root package, but you have to tell the -Distutils where source files in the root package live:: - - from distutils.core import setup - setup(name='foobar', - version='1.0', - package_dir={'': 'src'}, - packages=[''], - ) - -More typically, though, you will want to distribute multiple modules in the same -package (or in sub-packages). For example, if the :mod:`foo` and :mod:`bar` -modules belong in package :mod:`foobar`, one way to layout your source tree is -:: - - / - setup.py - foobar/ - __init__.py - foo.py - bar.py - -This is in fact the default layout expected by the Distutils, and the one that -requires the least work to describe in your setup script:: - - from distutils.core import setup - setup(name='foobar', - version='1.0', - packages=['foobar'], - ) - -If you want to put modules in directories not named for their package, then you -need to use the ``package_dir`` option again. For example, if the -:file:`src` directory holds modules in the :mod:`foobar` package:: - - / - setup.py - src/ - __init__.py - foo.py - bar.py - -an appropriate setup script would be :: - - from distutils.core import setup - setup(name='foobar', - version='1.0', - package_dir={'foobar': 'src'}, - packages=['foobar'], - ) - -Or, you might put modules from your main package right in the distribution -root:: - - / - setup.py - __init__.py - foo.py - bar.py - -in which case your setup script would be :: - - from distutils.core import setup - setup(name='foobar', - version='1.0', - package_dir={'foobar': ''}, - packages=['foobar'], - ) - -(The empty string also stands for the current directory.) - -If you have sub-packages, they must be explicitly listed in ``packages``, -but any entries in ``package_dir`` automatically extend to sub-packages. -(In other words, the Distutils does *not* scan your source tree, trying to -figure out which directories correspond to Python packages by looking for -:file:`__init__.py` files.) Thus, if the default layout grows a sub-package:: - - / - setup.py - foobar/ - __init__.py - foo.py - bar.py - subfoo/ - __init__.py - blah.py - -then the corresponding setup script would be :: - - from distutils.core import setup - setup(name='foobar', - version='1.0', - packages=['foobar', 'foobar.subfoo'], - ) - - -.. _single-ext: - -Single extension module -======================= - -Extension modules are specified using the ``ext_modules`` option. -``package_dir`` has no effect on where extension source files are found; -it only affects the source for pure Python modules. The simplest case, a -single extension module in a single C source file, is:: - - / - setup.py - foo.c - -If the :mod:`foo` extension belongs in the root package, the setup script for -this could be :: - - from distutils.core import setup - from distutils.extension import Extension - setup(name='foobar', - version='1.0', - ext_modules=[Extension('foo', ['foo.c'])], - ) - -If the extension actually belongs in a package, say :mod:`foopkg`, then - -With exactly the same source tree layout, this extension can be put in the -:mod:`foopkg` package simply by changing the name of the extension:: - - from distutils.core import setup - from distutils.extension import Extension - setup(name='foobar', - version='1.0', - ext_modules=[Extension('foopkg.foo', ['foo.c'])], - ) - -Checking a package -================== - -The ``check`` command allows you to verify if your package meta-data -meet the minimum requirements to build a distribution. - -To run it, just call it using your :file:`setup.py` script. If something is -missing, ``check`` will display a warning. - -Let's take an example with a simple script:: - - from distutils.core import setup - - setup(name='foobar') - -Running the ``check`` command will display some warnings: - -.. code-block:: shell-session - - $ python setup.py check - running check - warning: check: missing required meta-data: version, url - warning: check: missing meta-data: either (author and author_email) or - (maintainer and maintainer_email) should be supplied - - -If you use the reStructuredText syntax in the ``long_description`` field and -`docutils`_ is installed you can check if the syntax is fine with the -``check`` command, using the ``restructuredtext`` option. - -For example, if the :file:`setup.py` script is changed like this:: - - from distutils.core import setup - - desc = """\ - My description - ============== - - This is the description of the ``foobar`` package. - """ - - setup(name='foobar', version='1', author='tarek', - author_email='tarek@ziade.org', - url='http://example.com', long_description=desc) - -Where the long description is broken, ``check`` will be able to detect it -by using the :mod:`docutils` parser: - -.. code-block:: shell-session - - $ python setup.py check --restructuredtext - running check - warning: check: Title underline too short. (line 2) - warning: check: Could not finish the parsing. - -Reading the metadata -===================== - -The :func:`distutils.core.setup` function provides a command-line interface -that allows you to query the metadata fields of a project through the -``setup.py`` script of a given project: - -.. code-block:: shell-session - - $ python setup.py --name - distribute - -This call reads the ``name`` metadata by running the -:func:`distutils.core.setup` function. Although, when a source or binary -distribution is created with Distutils, the metadata fields are written -in a static file called :file:`PKG-INFO`. When a Distutils-based project is -installed in Python, the :file:`PKG-INFO` file is copied alongside the modules -and packages of the distribution under :file:`NAME-VERSION-pyX.X.egg-info`, -where ``NAME`` is the name of the project, ``VERSION`` its version as defined -in the Metadata, and ``pyX.X`` the major and minor version of Python like -``2.7`` or ``3.2``. - -You can read back this static file, by using the -:class:`distutils.dist.DistributionMetadata` class and its -:func:`read_pkg_file` method:: - - >>> from distutils.dist import DistributionMetadata - >>> metadata = DistributionMetadata() - >>> metadata.read_pkg_file(open('distribute-0.6.8-py2.7.egg-info')) - >>> metadata.name - 'distribute' - >>> metadata.version - '0.6.8' - >>> metadata.description - 'Easily download, build, install, upgrade, and uninstall Python packages' - -Notice that the class can also be instantiated with a metadata file path to -loads its values:: - - >>> pkg_info_path = 'distribute-0.6.8-py2.7.egg-info' - >>> DistributionMetadata(pkg_info_path).name - 'distribute' - - -.. % \section{Multiple extension modules} -.. % \label{multiple-ext} - -.. % \section{Putting it all together} - - -.. _docutils: http://docutils.sourceforge.net diff --git a/Doc/distutils/extending.rst b/Doc/distutils/extending.rst deleted file mode 100644 index 1075e81779a..00000000000 --- a/Doc/distutils/extending.rst +++ /dev/null @@ -1,98 +0,0 @@ -.. _extending-distutils: - -******************* -Extending Distutils -******************* - -.. include:: ./_setuptools_disclaimer.rst - -Distutils can be extended in various ways. Most extensions take the form of new -commands or replacements for existing commands. New commands may be written to -support new types of platform-specific packaging, for example, while -replacements for existing commands may be made to modify details of how the -command operates on a package. - -Most extensions of the distutils are made within :file:`setup.py` scripts that -want to modify existing commands; many simply add a few file extensions that -should be copied into packages in addition to :file:`.py` files as a -convenience. - -Most distutils command implementations are subclasses of the -:class:`distutils.cmd.Command` class. New commands may directly inherit from -:class:`Command`, while replacements often derive from :class:`Command` -indirectly, directly subclassing the command they are replacing. Commands are -required to derive from :class:`Command`. - -.. % \section{Extending existing commands} -.. % \label{extend-existing} - -.. % \section{Writing new commands} -.. % \label{new-commands} -.. % \XXX{Would an uninstall command be a good example here?} - - -Integrating new commands -======================== - -There are different ways to integrate new command implementations into -distutils. The most difficult is to lobby for the inclusion of the new features -in distutils itself, and wait for (and require) a version of Python that -provides that support. This is really hard for many reasons. - -The most common, and possibly the most reasonable for most needs, is to include -the new implementations with your :file:`setup.py` script, and cause the -:func:`distutils.core.setup` function use them:: - - from distutils.command.build_py import build_py as _build_py - from distutils.core import setup - - class build_py(_build_py): - """Specialized Python source builder.""" - - # implement whatever needs to be different... - - setup(cmdclass={'build_py': build_py}, - ...) - -This approach is most valuable if the new implementations must be used to use a -particular package, as everyone interested in the package will need to have the -new command implementation. - -Beginning with Python 2.4, a third option is available, intended to allow new -commands to be added which can support existing :file:`setup.py` scripts without -requiring modifications to the Python installation. This is expected to allow -third-party extensions to provide support for additional packaging systems, but -the commands can be used for anything distutils commands can be used for. A new -configuration option, ``command_packages`` (command-line option -:option:`!--command-packages`), can be used to specify additional packages to be -searched for modules implementing commands. Like all distutils options, this -can be specified on the command line or in a configuration file. This option -can only be set in the ``[global]`` section of a configuration file, or before -any commands on the command line. If set in a configuration file, it can be -overridden from the command line; setting it to an empty string on the command -line causes the default to be used. This should never be set in a configuration -file provided with a package. - -This new option can be used to add any number of packages to the list of -packages searched for command implementations; multiple package names should be -separated by commas. When not specified, the search is only performed in the -:mod:`distutils.command` package. When :file:`setup.py` is run with the option -``--command-packages distcmds,buildcmds``, however, the packages -:mod:`distutils.command`, :mod:`distcmds`, and :mod:`buildcmds` will be searched -in that order. New commands are expected to be implemented in modules of the -same name as the command by classes sharing the same name. Given the example -command line option above, the command :command:`bdist_openpkg` could be -implemented by the class :class:`distcmds.bdist_openpkg.bdist_openpkg` or -:class:`buildcmds.bdist_openpkg.bdist_openpkg`. - - -Adding new distribution types -============================= - -Commands that create distributions (files in the :file:`dist/` directory) need -to add ``(command, filename)`` pairs to ``self.distribution.dist_files`` so that -:command:`upload` can upload it to PyPI. The *filename* in the pair contains no -path information, only the name of the file itself. In dry-run mode, pairs -should still be added to represent what would have been created. - - diff --git a/Doc/distutils/index.rst b/Doc/distutils/index.rst deleted file mode 100644 index 2ccddc38b5f..00000000000 --- a/Doc/distutils/index.rst +++ /dev/null @@ -1,49 +0,0 @@ -.. _distutils-index: - -############################################## - Distributing Python Modules (Legacy version) -############################################## - -:Authors: Greg Ward, Anthony Baxter -:Email: distutils-sig@python.org - -.. seealso:: - - :ref:`distributing-index` - The up to date module distribution documentations - -.. note:: - - The entire ``distutils`` package has been deprecated and will be - removed in Python 3.12. This documentation is retained as a - reference only, and will be removed with the package. See the - :ref:`What's New ` entry for more information. - -.. include:: ./_setuptools_disclaimer.rst - -.. note:: - - This guide only covers the basic tools for building and distributing - extensions that are provided as part of this version of Python. Third party - tools offer easier to use and more secure alternatives. Refer to the `quick - recommendations section `__ - in the Python Packaging User Guide for more information. - -This document describes the Python Distribution Utilities ("Distutils") from -the module developer's point of view, describing the underlying capabilities -that ``setuptools`` builds on to allow Python developers to make Python modules -and extensions readily available to a wider audience. - -.. toctree:: - :maxdepth: 2 - :numbered: - - introduction.rst - setupscript.rst - configfile.rst - sourcedist.rst - builtdist.rst - examples.rst - extending.rst - commandref.rst - apiref.rst diff --git a/Doc/distutils/introduction.rst b/Doc/distutils/introduction.rst deleted file mode 100644 index 87ed178e52b..00000000000 --- a/Doc/distutils/introduction.rst +++ /dev/null @@ -1,203 +0,0 @@ -.. _distutils-intro: - -**************************** -An Introduction to Distutils -**************************** - -.. include:: ./_setuptools_disclaimer.rst - -This document covers using the Distutils to distribute your Python modules, -concentrating on the role of developer/distributor: if you're looking for -information on installing Python modules, you should refer to the -:ref:`install-index` chapter. - - -.. _distutils-concepts: - -Concepts & Terminology -====================== - -Using the Distutils is quite simple, both for module developers and for -users/administrators installing third-party modules. As a developer, your -responsibilities (apart from writing solid, well-documented and well-tested -code, of course!) are: - -* write a setup script (:file:`setup.py` by convention) - -* (optional) write a setup configuration file - -* create a source distribution - -* (optional) create one or more built (binary) distributions - -Each of these tasks is covered in this document. - -Not all module developers have access to a multitude of platforms, so it's not -always feasible to expect them to create a multitude of built distributions. It -is hoped that a class of intermediaries, called *packagers*, will arise to -address this need. Packagers will take source distributions released by module -developers, build them on one or more platforms, and release the resulting built -distributions. Thus, users on the most popular platforms will be able to -install most popular Python module distributions in the most natural way for -their platform, without having to run a single setup script or compile a line of -code. - - -.. _distutils-simple-example: - -A Simple Example -================ - -The setup script is usually quite simple, although since it's written in Python, -there are no arbitrary limits to what you can do with it, though you should be -careful about putting arbitrarily expensive operations in your setup script. -Unlike, say, Autoconf-style configure scripts, the setup script may be run -multiple times in the course of building and installing your module -distribution. - -If all you want to do is distribute a module called :mod:`foo`, contained in a -file :file:`foo.py`, then your setup script can be as simple as this:: - - from distutils.core import setup - setup(name='foo', - version='1.0', - py_modules=['foo'], - ) - -Some observations: - -* most information that you supply to the Distutils is supplied as keyword - arguments to the :func:`setup` function - -* those keyword arguments fall into two categories: package metadata (name, - version number) and information about what's in the package (a list of pure - Python modules, in this case) - -* modules are specified by module name, not filename (the same will hold true - for packages and extensions) - -* it's recommended that you supply a little more metadata, in particular your - name, email address and a URL for the project (see section :ref:`setup-script` - for an example) - -To create a source distribution for this module, you would create a setup -script, :file:`setup.py`, containing the above code, and run this command from a -terminal:: - - python setup.py sdist - -For Windows, open a command prompt window (:menuselection:`Start --> -Accessories`) and change the command to:: - - setup.py sdist - -:command:`sdist` will create an archive file (e.g., tarball on Unix, ZIP file on Windows) -containing your setup script :file:`setup.py`, and your module :file:`foo.py`. -The archive file will be named :file:`foo-1.0.tar.gz` (or :file:`.zip`), and -will unpack into a directory :file:`foo-1.0`. - -If an end-user wishes to install your :mod:`foo` module, all they have to do is -download :file:`foo-1.0.tar.gz` (or :file:`.zip`), unpack it, and---from the -:file:`foo-1.0` directory---run :: - - python setup.py install - -which will ultimately copy :file:`foo.py` to the appropriate directory for -third-party modules in their Python installation. - -This simple example demonstrates some fundamental concepts of the Distutils. -First, both developers and installers have the same basic user interface, i.e. -the setup script. The difference is which Distutils *commands* they use: the -:command:`sdist` command is almost exclusively for module developers, while -:command:`install` is more often for installers (although most developers will -want to install their own code occasionally). - -Other useful built distribution formats are RPM, implemented by the -:command:`bdist_rpm` command, Solaris :program:`pkgtool` -(:command:`bdist_pkgtool`), and HP-UX :program:`swinstall` -(:command:`bdist_sdux`). For example, the following command will create an RPM -file called :file:`foo-1.0.noarch.rpm`:: - - python setup.py bdist_rpm - -(The :command:`bdist_rpm` command uses the :command:`rpm` executable, therefore -this has to be run on an RPM-based system such as Red Hat Linux, SuSE Linux, or -Mandrake Linux.) - -You can find out what distribution formats are available at any time by running -:: - - python setup.py bdist --help-formats - - -.. _python-terms: - -General Python terminology -========================== - -If you're reading this document, you probably have a good idea of what modules, -extensions, and so forth are. Nevertheless, just to be sure that everyone is -operating from a common starting point, we offer the following glossary of -common Python terms: - -module - the basic unit of code reusability in Python: a block of code imported by some - other code. Three types of modules concern us here: pure Python modules, - extension modules, and packages. - -pure Python module - a module written in Python and contained in a single :file:`.py` file (and - possibly associated :file:`.pyc` files). Sometimes referred to as a - "pure module." - -extension module - a module written in the low-level language of the Python implementation: C/C++ - for Python, Java for Jython. Typically contained in a single dynamically - loadable pre-compiled file, e.g. a shared object (:file:`.so`) file for Python - extensions on Unix, a DLL (given the :file:`.pyd` extension) for Python - extensions on Windows, or a Java class file for Jython extensions. (Note that - currently, the Distutils only handles C/C++ extensions for Python.) - -package - a module that contains other modules; typically contained in a directory in the - filesystem and distinguished from other directories by the presence of a file - :file:`__init__.py`. - -root package - the root of the hierarchy of packages. (This isn't really a package, since it - doesn't have an :file:`__init__.py` file. But we have to call it something.) - The vast majority of the standard library is in the root package, as are many - small, standalone third-party modules that don't belong to a larger module - collection. Unlike regular packages, modules in the root package can be found in - many directories: in fact, every directory listed in ``sys.path`` contributes - modules to the root package. - - -.. _distutils-term: - -Distutils-specific terminology -============================== - -The following terms apply more specifically to the domain of distributing Python -modules using the Distutils: - -module distribution - a collection of Python modules distributed together as a single downloadable - resource and meant to be installed *en masse*. Examples of some well-known - module distributions are NumPy, SciPy, Pillow, - or mxBase. (This would be called a *package*, except that term is - already taken in the Python context: a single module distribution may contain - zero, one, or many Python packages.) - -pure module distribution - a module distribution that contains only pure Python modules and packages. - Sometimes referred to as a "pure distribution." - -non-pure module distribution - a module distribution that contains at least one extension module. Sometimes - referred to as a "non-pure distribution." - -distribution root - the top-level directory of your source tree (or source distribution); the - directory where :file:`setup.py` exists. Generally :file:`setup.py` will be - run from this directory. diff --git a/Doc/distutils/packageindex.rst b/Doc/distutils/packageindex.rst deleted file mode 100644 index ccb9a598b2b..00000000000 --- a/Doc/distutils/packageindex.rst +++ /dev/null @@ -1,16 +0,0 @@ -:orphan: - -.. _package-index: - -******************************* -The Python Package Index (PyPI) -******************************* - -The `Python Package Index (PyPI)`_ stores metadata describing distributions -packaged with distutils and other publishing tools, as well the distribution -archives themselves. - -References to up to date PyPI documentation can be found at -:ref:`publishing-python-packages`. - -.. _Python Package Index (PyPI): https://pypi.org diff --git a/Doc/distutils/setupscript.rst b/Doc/distutils/setupscript.rst deleted file mode 100644 index 4386a60b664..00000000000 --- a/Doc/distutils/setupscript.rst +++ /dev/null @@ -1,713 +0,0 @@ -.. _setup-script: - -************************ -Writing the Setup Script -************************ - -.. include:: ./_setuptools_disclaimer.rst - -The setup script is the centre of all activity in building, distributing, and -installing modules using the Distutils. The main purpose of the setup script is -to describe your module distribution to the Distutils, so that the various -commands that operate on your modules do the right thing. As we saw in section -:ref:`distutils-simple-example` above, the setup script consists mainly of a call to -:func:`setup`, and most information supplied to the Distutils by the module -developer is supplied as keyword arguments to :func:`setup`. - -Here's a slightly more involved example, which we'll follow for the next couple -of sections: the Distutils' own setup script. (Keep in mind that although the -Distutils are included with Python 1.6 and later, they also have an independent -existence so that Python 1.5.2 users can use them to install other module -distributions. The Distutils' own setup script, shown here, is used to install -the package into Python 1.5.2.) :: - - #!/usr/bin/env python - - from distutils.core import setup - - setup(name='Distutils', - version='1.0', - description='Python Distribution Utilities', - author='Greg Ward', - author_email='gward@python.net', - url='https://www.python.org/sigs/distutils-sig/', - packages=['distutils', 'distutils.command'], - ) - -There are only two differences between this and the trivial one-file -distribution presented in section :ref:`distutils-simple-example`: more metadata, and the -specification of pure Python modules by package, rather than by module. This is -important since the Distutils consist of a couple of dozen modules split into -(so far) two packages; an explicit list of every module would be tedious to -generate and difficult to maintain. For more information on the additional -meta-data, see section :ref:`meta-data`. - -Note that any pathnames (files or directories) supplied in the setup script -should be written using the Unix convention, i.e. slash-separated. The -Distutils will take care of converting this platform-neutral representation into -whatever is appropriate on your current platform before actually using the -pathname. This makes your setup script portable across operating systems, which -of course is one of the major goals of the Distutils. In this spirit, all -pathnames in this document are slash-separated. - -This, of course, only applies to pathnames given to Distutils functions. If -you, for example, use standard Python functions such as :func:`glob.glob` or -:func:`os.listdir` to specify files, you should be careful to write portable -code instead of hardcoding path separators:: - - glob.glob(os.path.join('mydir', 'subdir', '*.html')) - os.listdir(os.path.join('mydir', 'subdir')) - - -.. _listing-packages: - -Listing whole packages -====================== - -The ``packages`` option tells the Distutils to process (build, distribute, -install, etc.) all pure Python modules found in each package mentioned in the -``packages`` list. In order to do this, of course, there has to be a -correspondence between package names and directories in the filesystem. The -default correspondence is the most obvious one, i.e. package :mod:`distutils` is -found in the directory :file:`distutils` relative to the distribution root. -Thus, when you say ``packages = ['foo']`` in your setup script, you are -promising that the Distutils will find a file :file:`foo/__init__.py` (which -might be spelled differently on your system, but you get the idea) relative to -the directory where your setup script lives. If you break this promise, the -Distutils will issue a warning but still process the broken package anyway. - -If you use a different convention to lay out your source directory, that's no -problem: you just have to supply the ``package_dir`` option to tell the -Distutils about your convention. For example, say you keep all Python source -under :file:`lib`, so that modules in the "root package" (i.e., not in any -package at all) are in :file:`lib`, modules in the :mod:`foo` package are in -:file:`lib/foo`, and so forth. Then you would put :: - - package_dir = {'': 'lib'} - -in your setup script. The keys to this dictionary are package names, and an -empty package name stands for the root package. The values are directory names -relative to your distribution root. In this case, when you say ``packages = -['foo']``, you are promising that the file :file:`lib/foo/__init__.py` exists. - -Another possible convention is to put the :mod:`foo` package right in -:file:`lib`, the :mod:`foo.bar` package in :file:`lib/bar`, etc. This would be -written in the setup script as :: - - package_dir = {'foo': 'lib'} - -A ``package: dir`` entry in the ``package_dir`` dictionary implicitly -applies to all packages below *package*, so the :mod:`foo.bar` case is -automatically handled here. In this example, having ``packages = ['foo', -'foo.bar']`` tells the Distutils to look for :file:`lib/__init__.py` and -:file:`lib/bar/__init__.py`. (Keep in mind that although ``package_dir`` -applies recursively, you must explicitly list all packages in -``packages``: the Distutils will *not* recursively scan your source tree -looking for any directory with an :file:`__init__.py` file.) - - -.. _listing-modules: - -Listing individual modules -========================== - -For a small module distribution, you might prefer to list all modules rather -than listing packages---especially the case of a single module that goes in the -"root package" (i.e., no package at all). This simplest case was shown in -section :ref:`distutils-simple-example`; here is a slightly more involved example:: - - py_modules = ['mod1', 'pkg.mod2'] - -This describes two modules, one of them in the "root" package, the other in the -:mod:`pkg` package. Again, the default package/directory layout implies that -these two modules can be found in :file:`mod1.py` and :file:`pkg/mod2.py`, and -that :file:`pkg/__init__.py` exists as well. And again, you can override the -package/directory correspondence using the ``package_dir`` option. - - -.. _describing-extensions: - -Describing extension modules -============================ - -Just as writing Python extension modules is a bit more complicated than writing -pure Python modules, describing them to the Distutils is a bit more complicated. -Unlike pure modules, it's not enough just to list modules or packages and expect -the Distutils to go out and find the right files; you have to specify the -extension name, source file(s), and any compile/link requirements (include -directories, libraries to link with, etc.). - -.. XXX read over this section - -All of this is done through another keyword argument to :func:`setup`, the -``ext_modules`` option. ``ext_modules`` is just a list of -:class:`~distutils.core.Extension` instances, each of which describes a -single extension module. -Suppose your distribution includes a single extension, called :mod:`foo` and -implemented by :file:`foo.c`. If no additional instructions to the -compiler/linker are needed, describing this extension is quite simple:: - - Extension('foo', ['foo.c']) - -The :class:`Extension` class can be imported from :mod:`distutils.core` along -with :func:`setup`. Thus, the setup script for a module distribution that -contains only this one extension and nothing else might be:: - - from distutils.core import setup, Extension - setup(name='foo', - version='1.0', - ext_modules=[Extension('foo', ['foo.c'])], - ) - -The :class:`Extension` class (actually, the underlying extension-building -machinery implemented by the :command:`build_ext` command) supports a great deal -of flexibility in describing Python extensions, which is explained in the -following sections. - - -Extension names and packages ----------------------------- - -The first argument to the :class:`~distutils.core.Extension` constructor is -always the name of the extension, including any package names. For example, :: - - Extension('foo', ['src/foo1.c', 'src/foo2.c']) - -describes an extension that lives in the root package, while :: - - Extension('pkg.foo', ['src/foo1.c', 'src/foo2.c']) - -describes the same extension in the :mod:`pkg` package. The source files and -resulting object code are identical in both cases; the only difference is where -in the filesystem (and therefore where in Python's namespace hierarchy) the -resulting extension lives. - -If you have a number of extensions all in the same package (or all under the -same base package), use the ``ext_package`` keyword argument to -:func:`setup`. For example, :: - - setup(..., - ext_package='pkg', - ext_modules=[Extension('foo', ['foo.c']), - Extension('subpkg.bar', ['bar.c'])], - ) - -will compile :file:`foo.c` to the extension :mod:`pkg.foo`, and :file:`bar.c` to -:mod:`pkg.subpkg.bar`. - - -Extension source files ----------------------- - -The second argument to the :class:`~distutils.core.Extension` constructor is -a list of source -files. Since the Distutils currently only support C, C++, and Objective-C -extensions, these are normally C/C++/Objective-C source files. (Be sure to use -appropriate extensions to distinguish C++ source files: :file:`.cc` and -:file:`.cpp` seem to be recognized by both Unix and Windows compilers.) - -However, you can also include SWIG interface (:file:`.i`) files in the list; the -:command:`build_ext` command knows how to deal with SWIG extensions: it will run -SWIG on the interface file and compile the resulting C/C++ file into your -extension. - -.. XXX SWIG support is rough around the edges and largely untested! - -This warning notwithstanding, options to SWIG can be currently passed like -this:: - - setup(..., - ext_modules=[Extension('_foo', ['foo.i'], - swig_opts=['-modern', '-I../include'])], - py_modules=['foo'], - ) - -Or on the commandline like this:: - - > python setup.py build_ext --swig-opts="-modern -I../include" - -On some platforms, you can include non-source files that are processed by the -compiler and included in your extension. Currently, this just means Windows -message text (:file:`.mc`) files and resource definition (:file:`.rc`) files for -Visual C++. These will be compiled to binary resource (:file:`.res`) files and -linked into the executable. - - -Preprocessor options --------------------- - -Three optional arguments to :class:`~distutils.core.Extension` will help if -you need to specify include directories to search or preprocessor macros to -define/undefine: ``include_dirs``, ``define_macros``, and ``undef_macros``. - -For example, if your extension requires header files in the :file:`include` -directory under your distribution root, use the ``include_dirs`` option:: - - Extension('foo', ['foo.c'], include_dirs=['include']) - -You can specify absolute directories there; if you know that your extension will -only be built on Unix systems with X11R6 installed to :file:`/usr`, you can get -away with :: - - Extension('foo', ['foo.c'], include_dirs=['/usr/include/X11']) - -You should avoid this sort of non-portable usage if you plan to distribute your -code: it's probably better to write C code like :: - - #include - -If you need to include header files from some other Python extension, you can -take advantage of the fact that header files are installed in a consistent way -by the Distutils :command:`install_headers` command. For example, the Numerical -Python header files are installed (on a standard Unix installation) to -:file:`/usr/local/include/python1.5/Numerical`. (The exact location will differ -according to your platform and Python installation.) Since the Python include -directory---\ :file:`/usr/local/include/python1.5` in this case---is always -included in the search path when building Python extensions, the best approach -is to write C code like :: - - #include - -If you must put the :file:`Numerical` include directory right into your header -search path, though, you can find that directory using the Distutils -:mod:`distutils.sysconfig` module:: - - from distutils.sysconfig import get_python_inc - incdir = os.path.join(get_python_inc(plat_specific=1), 'Numerical') - setup(..., - Extension(..., include_dirs=[incdir]), - ) - -Even though this is quite portable---it will work on any Python installation, -regardless of platform---it's probably easier to just write your C code in the -sensible way. - -You can define and undefine pre-processor macros with the ``define_macros`` and -``undef_macros`` options. ``define_macros`` takes a list of ``(name, value)`` -tuples, where ``name`` is the name of the macro to define (a string) and -``value`` is its value: either a string or ``None``. (Defining a macro ``FOO`` -to ``None`` is the equivalent of a bare ``#define FOO`` in your C source: with -most compilers, this sets ``FOO`` to the string ``1``.) ``undef_macros`` is -just a list of macros to undefine. - -For example:: - - Extension(..., - define_macros=[('NDEBUG', '1'), - ('HAVE_STRFTIME', None)], - undef_macros=['HAVE_FOO', 'HAVE_BAR']) - -is the equivalent of having this at the top of every C source file:: - - #define NDEBUG 1 - #define HAVE_STRFTIME - #undef HAVE_FOO - #undef HAVE_BAR - - -Library options ---------------- - -You can also specify the libraries to link against when building your extension, -and the directories to search for those libraries. The ``libraries`` option is -a list of libraries to link against, ``library_dirs`` is a list of directories -to search for libraries at link-time, and ``runtime_library_dirs`` is a list of -directories to search for shared (dynamically loaded) libraries at run-time. - -For example, if you need to link against libraries known to be in the standard -library search path on target systems :: - - Extension(..., - libraries=['gdbm', 'readline']) - -If you need to link with libraries in a non-standard location, you'll have to -include the location in ``library_dirs``:: - - Extension(..., - library_dirs=['/usr/X11R6/lib'], - libraries=['X11', 'Xt']) - -(Again, this sort of non-portable construct should be avoided if you intend to -distribute your code.) - -.. XXX Should mention clib libraries here or somewhere else! - - -Other options -------------- - -There are still some other options which can be used to handle special cases. - -The ``optional`` option is a boolean; if it is true, -a build failure in the extension will not abort the build process, but -instead simply not install the failing extension. - -The ``extra_objects`` option is a list of object files to be passed to the -linker. These files must not have extensions, as the default extension for the -compiler is used. - -``extra_compile_args`` and ``extra_link_args`` can be used to -specify additional command line options for the respective compiler and linker -command lines. - -``export_symbols`` is only useful on Windows. It can contain a list of -symbols (functions or variables) to be exported. This option is not needed when -building compiled extensions: Distutils will automatically add ``initmodule`` -to the list of exported symbols. - -The ``depends`` option is a list of files that the extension depends on -(for example header files). The build command will call the compiler on the -sources to rebuild extension if any on this files has been modified since the -previous build. - -Relationships between Distributions and Packages -================================================ - -A distribution may relate to packages in three specific ways: - -#. It can require packages or modules. - -#. It can provide packages or modules. - -#. It can obsolete packages or modules. - -These relationships can be specified using keyword arguments to the -:func:`distutils.core.setup` function. - -Dependencies on other Python modules and packages can be specified by supplying -the *requires* keyword argument to :func:`setup`. The value must be a list of -strings. Each string specifies a package that is required, and optionally what -versions are sufficient. - -To specify that any version of a module or package is required, the string -should consist entirely of the module or package name. Examples include -``'mymodule'`` and ``'xml.parsers.expat'``. - -If specific versions are required, a sequence of qualifiers can be supplied in -parentheses. Each qualifier may consist of a comparison operator and a version -number. The accepted comparison operators are:: - - < > == - <= >= != - -These can be combined by using multiple qualifiers separated by commas (and -optional whitespace). In this case, all of the qualifiers must be matched; a -logical AND is used to combine the evaluations. - -Let's look at a bunch of examples: - -+-------------------------+----------------------------------------------+ -| Requires Expression | Explanation | -+=========================+==============================================+ -| ``==1.0`` | Only version ``1.0`` is compatible | -+-------------------------+----------------------------------------------+ -| ``>1.0, !=1.5.1, <2.0`` | Any version after ``1.0`` and before ``2.0`` | -| | is compatible, except ``1.5.1`` | -+-------------------------+----------------------------------------------+ - -Now that we can specify dependencies, we also need to be able to specify what we -provide that other distributions can require. This is done using the *provides* -keyword argument to :func:`setup`. The value for this keyword is a list of -strings, each of which names a Python module or package, and optionally -identifies the version. If the version is not specified, it is assumed to match -that of the distribution. - -Some examples: - -+---------------------+----------------------------------------------+ -| Provides Expression | Explanation | -+=====================+==============================================+ -| ``mypkg`` | Provide ``mypkg``, using the distribution | -| | version | -+---------------------+----------------------------------------------+ -| ``mypkg (1.1)`` | Provide ``mypkg`` version 1.1, regardless of | -| | the distribution version | -+---------------------+----------------------------------------------+ - -A package can declare that it obsoletes other packages using the *obsoletes* -keyword argument. The value for this is similar to that of the *requires* -keyword: a list of strings giving module or package specifiers. Each specifier -consists of a module or package name optionally followed by one or more version -qualifiers. Version qualifiers are given in parentheses after the module or -package name. - -The versions identified by the qualifiers are those that are obsoleted by the -distribution being described. If no qualifiers are given, all versions of the -named module or package are understood to be obsoleted. - -.. _distutils-installing-scripts: - -Installing Scripts -================== - -So far we have been dealing with pure and non-pure Python modules, which are -usually not run by themselves but imported by scripts. - -Scripts are files containing Python source code, intended to be started from the -command line. Scripts don't require Distutils to do anything very complicated. -The only clever feature is that if the first line of the script starts with -``#!`` and contains the word "python", the Distutils will adjust the first line -to refer to the current interpreter location. By default, it is replaced with -the current interpreter location. The :option:`!--executable` (or :option:`!-e`) -option will allow the interpreter path to be explicitly overridden. - -The ``scripts`` option simply is a list of files to be handled in this -way. From the PyXML setup script:: - - setup(..., - scripts=['scripts/xmlproc_parse', 'scripts/xmlproc_val'] - ) - -.. versionchanged:: 3.1 - All the scripts will also be added to the ``MANIFEST`` file if no template is - provided. See :ref:`manifest`. - - -.. _distutils-installing-package-data: - -Installing Package Data -======================= - -Often, additional files need to be installed into a package. These files are -often data that's closely related to the package's implementation, or text files -containing documentation that might be of interest to programmers using the -package. These files are called :dfn:`package data`. - -Package data can be added to packages using the ``package_data`` keyword -argument to the :func:`setup` function. The value must be a mapping from -package name to a list of relative path names that should be copied into the -package. The paths are interpreted as relative to the directory containing the -package (information from the ``package_dir`` mapping is used if appropriate); -that is, the files are expected to be part of the package in the source -directories. They may contain glob patterns as well. - -The path names may contain directory portions; any necessary directories will be -created in the installation. - -For example, if a package should contain a subdirectory with several data files, -the files can be arranged like this in the source tree:: - - setup.py - src/ - mypkg/ - __init__.py - module.py - data/ - tables.dat - spoons.dat - forks.dat - -The corresponding call to :func:`setup` might be:: - - setup(..., - packages=['mypkg'], - package_dir={'mypkg': 'src/mypkg'}, - package_data={'mypkg': ['data/*.dat']}, - ) - - -.. versionchanged:: 3.1 - All the files that match ``package_data`` will be added to the ``MANIFEST`` - file if no template is provided. See :ref:`manifest`. - - -.. _distutils-additional-files: - -Installing Additional Files -=========================== - -The ``data_files`` option can be used to specify additional files needed -by the module distribution: configuration files, message catalogs, data files, -anything which doesn't fit in the previous categories. - -``data_files`` specifies a sequence of (*directory*, *files*) pairs in the -following way:: - - setup(..., - data_files=[('bitmaps', ['bm/b1.gif', 'bm/b2.gif']), - ('config', ['cfg/data.cfg'])], - ) - -Each (*directory*, *files*) pair in the sequence specifies the installation -directory and the files to install there. - -Each file name in *files* is interpreted relative to the :file:`setup.py` -script at the top of the package source distribution. Note that you can -specify the directory where the data files will be installed, but you cannot -rename the data files themselves. - -The *directory* should be a relative path. It is interpreted relative to the -installation prefix (Python's ``sys.prefix`` for system installations; -``site.USER_BASE`` for user installations). Distutils allows *directory* to be -an absolute installation path, but this is discouraged since it is -incompatible with the wheel packaging format. No directory information from -*files* is used to determine the final location of the installed file; only -the name of the file is used. - -You can specify the ``data_files`` options as a simple sequence of files -without specifying a target directory, but this is not recommended, and the -:command:`install` command will print a warning in this case. To install data -files directly in the target directory, an empty string should be given as the -directory. - -.. versionchanged:: 3.1 - All the files that match ``data_files`` will be added to the ``MANIFEST`` - file if no template is provided. See :ref:`manifest`. - - -.. _meta-data: - -Additional meta-data -==================== - -The setup script may include additional meta-data beyond the name and version. -This information includes: - -+----------------------+---------------------------+-----------------+--------+ -| Meta-Data | Description | Value | Notes | -+======================+===========================+=================+========+ -| ``name`` | name of the package | short string | \(1) | -+----------------------+---------------------------+-----------------+--------+ -| ``version`` | version of this release | short string | (1)(2) | -+----------------------+---------------------------+-----------------+--------+ -| ``author`` | package author's name | short string | \(3) | -+----------------------+---------------------------+-----------------+--------+ -| ``author_email`` | email address of the | email address | \(3) | -| | package author | | | -+----------------------+---------------------------+-----------------+--------+ -| ``maintainer`` | package maintainer's name | short string | \(3) | -+----------------------+---------------------------+-----------------+--------+ -| ``maintainer_email`` | email address of the | email address | \(3) | -| | package maintainer | | | -+----------------------+---------------------------+-----------------+--------+ -| ``url`` | home page for the package | URL | \(1) | -+----------------------+---------------------------+-----------------+--------+ -| ``description`` | short, summary | short string | | -| | description of the | | | -| | package | | | -+----------------------+---------------------------+-----------------+--------+ -| ``long_description`` | longer description of the | long string | \(4) | -| | package | | | -+----------------------+---------------------------+-----------------+--------+ -| ``download_url`` | location where the | URL | | -| | package may be downloaded | | | -+----------------------+---------------------------+-----------------+--------+ -| ``classifiers`` | a list of classifiers | list of strings | (6)(7) | -+----------------------+---------------------------+-----------------+--------+ -| ``platforms`` | a list of platforms | list of strings | (6)(8) | -+----------------------+---------------------------+-----------------+--------+ -| ``keywords`` | a list of keywords | list of strings | (6)(8) | -+----------------------+---------------------------+-----------------+--------+ -| ``license`` | license for the package | short string | \(5) | -+----------------------+---------------------------+-----------------+--------+ - -Notes: - -(1) - These fields are required. - -(2) - It is recommended that versions take the form *major.minor[.patch[.sub]]*. - -(3) - Either the author or the maintainer must be identified. If maintainer is - provided, distutils lists it as the author in :file:`PKG-INFO`. - -(4) - The ``long_description`` field is used by PyPI when you publish a package, - to build its project page. - -(5) - The ``license`` field is a text indicating the license covering the - package where the license is not a selection from the "License" Trove - classifiers. See the ``Classifier`` field. Notice that - there's a ``licence`` distribution option which is deprecated but still - acts as an alias for ``license``. - -(6) - This field must be a list. - -(7) - The valid classifiers are listed on - `PyPI `_. - -(8) - To preserve backward compatibility, this field also accepts a string. If - you pass a comma-separated string ``'foo, bar'``, it will be converted to - ``['foo', 'bar']``, Otherwise, it will be converted to a list of one - string. - -'short string' - A single line of text, not more than 200 characters. - -'long string' - Multiple lines of plain text in reStructuredText format (see - http://docutils.sourceforge.net/). - -'list of strings' - See below. - -Encoding the version information is an art in itself. Python packages generally -adhere to the version format *major.minor[.patch][sub]*. The major number is 0 -for initial, experimental releases of software. It is incremented for releases -that represent major milestones in a package. The minor number is incremented -when important new features are added to the package. The patch number -increments when bug-fix releases are made. Additional trailing version -information is sometimes used to indicate sub-releases. These are -"a1,a2,...,aN" (for alpha releases, where functionality and API may change), -"b1,b2,...,bN" (for beta releases, which only fix bugs) and "pr1,pr2,...,prN" -(for final pre-release release testing). Some examples: - -0.1.0 - the first, experimental release of a package - -1.0.1a2 - the second alpha release of the first patch version of 1.0 - -``classifiers`` must be specified in a list:: - - setup(..., - classifiers=[ - 'Development Status :: 4 - Beta', - 'Environment :: Console', - 'Environment :: Web Environment', - 'Intended Audience :: End Users/Desktop', - 'Intended Audience :: Developers', - 'Intended Audience :: System Administrators', - 'License :: OSI Approved :: Python Software Foundation License', - 'Operating System :: MacOS :: MacOS X', - 'Operating System :: Microsoft :: Windows', - 'Operating System :: POSIX', - 'Programming Language :: Python', - 'Topic :: Communications :: Email', - 'Topic :: Office/Business', - 'Topic :: Software Development :: Bug Tracking', - ], - ) - -.. versionchanged:: 3.7 - :class:`~distutils.core.setup` now warns when ``classifiers``, ``keywords`` - or ``platforms`` fields are not specified as a list or a string. - -.. _debug-setup-script: - -Debugging the setup script -========================== - -Sometimes things go wrong, and the setup script doesn't do what the developer -wants. - -Distutils catches any exceptions when running the setup script, and print a -simple error message before the script is terminated. The motivation for this -behaviour is to not confuse administrators who don't know much about Python and -are trying to install a package. If they get a big long traceback from deep -inside the guts of Distutils, they may think the package or the Python -installation is broken because they don't read all the way down to the bottom -and see that it's a permission problem. - -On the other hand, this doesn't help the developer to find the cause of the -failure. For this purpose, the :envvar:`DISTUTILS_DEBUG` environment variable can be set -to anything except an empty string, and distutils will now print detailed -information about what it is doing, dump the full traceback when an exception -occurs, and print the whole command line when an external program (like a C -compiler) fails. diff --git a/Doc/distutils/sourcedist.rst b/Doc/distutils/sourcedist.rst deleted file mode 100644 index b55d01157f3..00000000000 --- a/Doc/distutils/sourcedist.rst +++ /dev/null @@ -1,245 +0,0 @@ -.. _source-dist: - -****************************** -Creating a Source Distribution -****************************** - -.. include:: ./_setuptools_disclaimer.rst - -As shown in section :ref:`distutils-simple-example`, you use the :command:`sdist` command -to create a source distribution. In the simplest case, :: - - python setup.py sdist - -(assuming you haven't specified any :command:`sdist` options in the setup script -or config file), :command:`sdist` creates the archive of the default format for -the current platform. The default format is a gzip'ed tar file -(:file:`.tar.gz`) on Unix, and ZIP file on Windows. - -You can specify as many formats as you like using the :option:`!--formats` -option, for example:: - - python setup.py sdist --formats=gztar,zip - -to create a gzipped tarball and a zip file. The available formats are: - -+-----------+-------------------------+-------------+ -| Format | Description | Notes | -+===========+=========================+=============+ -| ``zip`` | zip file (:file:`.zip`) | (1),(3) | -+-----------+-------------------------+-------------+ -| ``gztar`` | gzip'ed tar file | \(2) | -| | (:file:`.tar.gz`) | | -+-----------+-------------------------+-------------+ -| ``bztar`` | bzip2'ed tar file | \(5) | -| | (:file:`.tar.bz2`) | | -+-----------+-------------------------+-------------+ -| ``xztar`` | xz'ed tar file | \(5) | -| | (:file:`.tar.xz`) | | -+-----------+-------------------------+-------------+ -| ``ztar`` | compressed tar file | (4),(5) | -| | (:file:`.tar.Z`) | | -+-----------+-------------------------+-------------+ -| ``tar`` | tar file (:file:`.tar`) | \(5) | -+-----------+-------------------------+-------------+ - -.. versionchanged:: 3.5 - Added support for the ``xztar`` format. - -Notes: - -(1) - default on Windows - -(2) - default on Unix - -(3) - requires either external :program:`zip` utility or :mod:`zipfile` module (part - of the standard Python library since Python 1.6) - -(4) - requires the :program:`compress` program. Notice that this format is now - pending for deprecation and will be removed in the future versions of Python. -(5) - deprecated by `PEP 527 `_; - `PyPI `_ only accepts ``.zip`` and ``.tar.gz`` files. - -When using any ``tar`` format (``gztar``, ``bztar``, ``xztar``, ``ztar`` or -``tar``), under Unix you can specify the ``owner`` and ``group`` names -that will be set for each member of the archive. - -For example, if you want all files of the archive to be owned by root:: - - python setup.py sdist --owner=root --group=root - - -.. _manifest: - -Specifying the files to distribute -================================== - -If you don't supply an explicit list of files (or instructions on how to -generate one), the :command:`sdist` command puts a minimal default set into the -source distribution: - -* all Python source files implied by the ``py_modules`` and - ``packages`` options - -* all C source files mentioned in the ``ext_modules`` or - ``libraries`` options - - .. XXX getting C library sources currently broken---no - :meth:`get_source_files` method in :file:`build_clib.py`! - -* scripts identified by the ``scripts`` option - See :ref:`distutils-installing-scripts`. - -* anything that looks like a test script: :file:`test/test\*.py` (currently, the - Distutils don't do anything with test scripts except include them in source - distributions, but in the future there will be a standard for testing Python - module distributions) - -* Any of the standard README files (:file:`README`, :file:`README.txt`, - or :file:`README.rst`), :file:`setup.py` (or whatever you called your setup - script), and :file:`setup.cfg`. - -* all files that matches the ``package_data`` metadata. - See :ref:`distutils-installing-package-data`. - -* all files that matches the ``data_files`` metadata. - See :ref:`distutils-additional-files`. - -Sometimes this is enough, but usually you will want to specify additional files -to distribute. The typical way to do this is to write a *manifest template*, -called :file:`MANIFEST.in` by default. The manifest template is just a list of -instructions for how to generate your manifest file, :file:`MANIFEST`, which is -the exact list of files to include in your source distribution. The -:command:`sdist` command processes this template and generates a manifest based -on its instructions and what it finds in the filesystem. - -If you prefer to roll your own manifest file, the format is simple: one filename -per line, regular files (or symlinks to them) only. If you do supply your own -:file:`MANIFEST`, you must specify everything: the default set of files -described above does not apply in this case. - -.. versionchanged:: 3.1 - An existing generated :file:`MANIFEST` will be regenerated without - :command:`sdist` comparing its modification time to the one of - :file:`MANIFEST.in` or :file:`setup.py`. - -.. versionchanged:: 3.1.3 - :file:`MANIFEST` files start with a comment indicating they are generated. - Files without this comment are not overwritten or removed. - -.. versionchanged:: 3.2.2 - :command:`sdist` will read a :file:`MANIFEST` file if no :file:`MANIFEST.in` - exists, like it used to do. - -.. versionchanged:: 3.7 - :file:`README.rst` is now included in the list of distutils standard READMEs. - - -The manifest template has one command per line, where each command specifies a -set of files to include or exclude from the source distribution. For an -example, again we turn to the Distutils' own manifest template: - -.. code-block:: none - - include *.txt - recursive-include examples *.txt *.py - prune examples/sample?/build - -The meanings should be fairly clear: include all files in the distribution root -matching :file:`\*.txt`, all files anywhere under the :file:`examples` directory -matching :file:`\*.txt` or :file:`\*.py`, and exclude all directories matching -:file:`examples/sample?/build`. All of this is done *after* the standard -include set, so you can exclude files from the standard set with explicit -instructions in the manifest template. (Or, you can use the -:option:`!--no-defaults` option to disable the standard set entirely.) There are -several other commands available in the manifest template mini-language; see -section :ref:`sdist-cmd`. - -The order of commands in the manifest template matters: initially, we have the -list of default files as described above, and each command in the template adds -to or removes from that list of files. Once we have fully processed the -manifest template, we remove files that should not be included in the source -distribution: - -* all files in the Distutils "build" tree (default :file:`build/`) - -* all files in directories named :file:`RCS`, :file:`CVS`, :file:`.svn`, - :file:`.hg`, :file:`.git`, :file:`.bzr` or :file:`_darcs` - -Now we have our complete list of files, which is written to the manifest for -future reference, and then used to build the source distribution archive(s). - -You can disable the default set of included files with the -:option:`!--no-defaults` option, and you can disable the standard exclude set -with :option:`!--no-prune`. - -Following the Distutils' own manifest template, let's trace how the -:command:`sdist` command builds the list of files to include in the Distutils -source distribution: - -#. include all Python source files in the :file:`distutils` and - :file:`distutils/command` subdirectories (because packages corresponding to - those two directories were mentioned in the ``packages`` option in the - setup script---see section :ref:`setup-script`) - -#. include :file:`README.txt`, :file:`setup.py`, and :file:`setup.cfg` (standard - files) - -#. include :file:`test/test\*.py` (standard files) - -#. include :file:`\*.txt` in the distribution root (this will find - :file:`README.txt` a second time, but such redundancies are weeded out later) - -#. include anything matching :file:`\*.txt` or :file:`\*.py` in the sub-tree - under :file:`examples`, - -#. exclude all files in the sub-trees starting at directories matching - :file:`examples/sample?/build`\ ---this may exclude files included by the - previous two steps, so it's important that the ``prune`` command in the manifest - template comes after the ``recursive-include`` command - -#. exclude the entire :file:`build` tree, and any :file:`RCS`, :file:`CVS`, - :file:`.svn`, :file:`.hg`, :file:`.git`, :file:`.bzr` and :file:`_darcs` - directories - -Just like in the setup script, file and directory names in the manifest template -should always be slash-separated; the Distutils will take care of converting -them to the standard representation on your platform. That way, the manifest -template is portable across operating systems. - - -.. _manifest-options: - -Manifest-related options -======================== - -The normal course of operations for the :command:`sdist` command is as follows: - -* if the manifest file (:file:`MANIFEST` by default) exists and the first line - does not have a comment indicating it is generated from :file:`MANIFEST.in`, - then it is used as is, unaltered - -* if the manifest file doesn't exist or has been previously automatically - generated, read :file:`MANIFEST.in` and create the manifest - -* if neither :file:`MANIFEST` nor :file:`MANIFEST.in` exist, create a manifest - with just the default file set - -* use the list of files now in :file:`MANIFEST` (either just generated or read - in) to create the source distribution archive(s) - -There are a couple of options that modify this behaviour. First, use the -:option:`!--no-defaults` and :option:`!--no-prune` to disable the standard -"include" and "exclude" sets. - -Second, you might just want to (re)generate the manifest, but not create a source -distribution:: - - python setup.py sdist --manifest-only - -:option:`!-o` is a shortcut for :option:`!--manifest-only`. diff --git a/Doc/distutils/uploading.rst b/Doc/distutils/uploading.rst deleted file mode 100644 index 4c391cab072..00000000000 --- a/Doc/distutils/uploading.rst +++ /dev/null @@ -1,8 +0,0 @@ -:orphan: - -*************************************** -Uploading Packages to the Package Index -*************************************** - -References to up to date PyPI documentation can be found at -:ref:`publishing-python-packages`. diff --git a/Doc/extending/building.rst b/Doc/extending/building.rst index 53817074ab1..880bb33ee56 100644 --- a/Doc/extending/building.rst +++ b/Doc/extending/building.rst @@ -11,7 +11,7 @@ A C extension for CPython is a shared library (e.g. a ``.so`` file on Linux, To be importable, the shared library must be available on :envvar:`PYTHONPATH`, and must be named after the module name, with an appropriate extension. -When using distutils, the correct filename is generated automatically. +When using setuptools, the correct filename is generated automatically. The initialization function has the signature: @@ -45,122 +45,12 @@ See the *"Multiple modules in one library"* section in :pep:`489` for details. .. highlight:: c -Building C and C++ Extensions with distutils -============================================ +.. _setuptools-index: -.. sectionauthor:: Martin v. Löwis +Building C and C++ Extensions with setuptools +============================================= -Extension modules can be built using distutils, which is included in Python. -Since distutils also supports creation of binary packages, users don't -necessarily need a compiler and distutils to install the extension. - -A distutils package contains a driver script, :file:`setup.py`. This is a plain -Python file, which, in the most simple case, could look like this: - -.. code-block:: python3 - - from distutils.core import setup, Extension - - module1 = Extension('demo', - sources = ['demo.c']) - - setup (name = 'PackageName', - version = '1.0', - description = 'This is a demo package', - ext_modules = [module1]) - - -With this :file:`setup.py`, and a file :file:`demo.c`, running :: - - python setup.py build - -will compile :file:`demo.c`, and produce an extension module named ``demo`` in -the :file:`build` directory. Depending on the system, the module file will end -up in a subdirectory :file:`build/lib.system`, and may have a name like -:file:`demo.so` or :file:`demo.pyd`. - -In the :file:`setup.py`, all execution is performed by calling the ``setup`` -function. This takes a variable number of keyword arguments, of which the -example above uses only a subset. Specifically, the example specifies -meta-information to build packages, and it specifies the contents of the -package. Normally, a package will contain additional modules, like Python -source modules, documentation, subpackages, etc. Please refer to the distutils -documentation in :ref:`distutils-index` to learn more about the features of -distutils; this section explains building extension modules only. - -It is common to pre-compute arguments to :func:`setup`, to better structure the -driver script. In the example above, the ``ext_modules`` argument to -:func:`~distutils.core.setup` is a list of extension modules, each of which is -an instance of -the :class:`~distutils.extension.Extension`. In the example, the instance -defines an extension named ``demo`` which is build by compiling a single source -file, :file:`demo.c`. - -In many cases, building an extension is more complex, since additional -preprocessor defines and libraries may be needed. This is demonstrated in the -example below. - -.. code-block:: python3 - - from distutils.core import setup, Extension - - module1 = Extension('demo', - define_macros = [('MAJOR_VERSION', '1'), - ('MINOR_VERSION', '0')], - include_dirs = ['/usr/local/include'], - libraries = ['tcl83'], - library_dirs = ['/usr/local/lib'], - sources = ['demo.c']) - - setup (name = 'PackageName', - version = '1.0', - description = 'This is a demo package', - author = 'Martin v. Loewis', - author_email = 'martin@v.loewis.de', - url = 'https://docs.python.org/extending/building', - long_description = ''' - This is really just a demo package. - ''', - ext_modules = [module1]) - - -In this example, :func:`~distutils.core.setup` is called with additional -meta-information, which -is recommended when distribution packages have to be built. For the extension -itself, it specifies preprocessor defines, include directories, library -directories, and libraries. Depending on the compiler, distutils passes this -information in different ways to the compiler. For example, on Unix, this may -result in the compilation commands :: - - gcc -DNDEBUG -g -O3 -Wall -Wstrict-prototypes -fPIC -DMAJOR_VERSION=1 -DMINOR_VERSION=0 -I/usr/local/include -I/usr/local/include/python2.2 -c demo.c -o build/temp.linux-i686-2.2/demo.o - - gcc -shared build/temp.linux-i686-2.2/demo.o -L/usr/local/lib -ltcl83 -o build/lib.linux-i686-2.2/demo.so - -These lines are for demonstration purposes only; distutils users should trust -that distutils gets the invocations right. - - -.. _distributing: - -Distributing your extension modules -=================================== - -When an extension has been successfully built, there are three ways to use it. - -End-users will typically want to install the module, they do so by running :: - - python setup.py install - -Module maintainers should produce source packages; to do so, they run :: - - python setup.py sdist - -In some cases, additional files need to be included in a source distribution; -this is done through a :file:`MANIFEST.in` file; see :ref:`manifest` for details. - -If the source distribution has been built successfully, maintainers can also -create binary distributions. Depending on the platform, one of the following -commands can be used to do so. :: - - python setup.py bdist_rpm - python setup.py bdist_dumb +Python 3.12 and newer no longer come with distutils. Please refer to the +``setuptools`` documentation at +https://setuptools.readthedocs.io/en/latest/setuptools.html +to learn more about how build and distribute C/C++ extensions with setuptools. diff --git a/Doc/extending/windows.rst b/Doc/extending/windows.rst index 28d0350f6f1..1129b0968bc 100644 --- a/Doc/extending/windows.rst +++ b/Doc/extending/windows.rst @@ -34,10 +34,10 @@ A Cookbook Approach =================== There are two approaches to building extension modules on Windows, just as there -are on Unix: use the :mod:`distutils` package to control the build process, or -do things manually. The distutils approach works well for most extensions; -documentation on using :mod:`distutils` to build and package extension modules -is available in :ref:`distutils-index`. If you find you really need to do +are on Unix: use the ``setuptools`` package to control the build process, or +do things manually. The setuptools approach works well for most extensions; +documentation on using ``setuptools`` to build and package extension modules +is available in :ref:`setuptools-index`. If you find you really need to do things manually, it may be instructive to study the project file for the :source:`winsound ` standard library module. diff --git a/Doc/install/index.rst b/Doc/install/index.rst index 63b64b95fc7..0923267d066 100644 --- a/Doc/install/index.rst +++ b/Doc/install/index.rst @@ -23,7 +23,11 @@ The up to date module installation documentation. For regular Python usage, you almost certainly want that document rather than this one. -.. include:: ../distutils/_setuptools_disclaimer.rst +.. note:: + + This document is being retained solely until the ``setuptools`` documentation + at https://setuptools.readthedocs.io/en/latest/setuptools.html + independently covers all of the relevant information currently included here. .. note:: diff --git a/Doc/library/distribution.rst b/Doc/library/distribution.rst index 8d4befe41b3..bec1ca3cc39 100644 --- a/Doc/library/distribution.rst +++ b/Doc/library/distribution.rst @@ -9,7 +9,6 @@ with a local index server, or without any index server at all. .. toctree:: - distutils.rst ensurepip.rst venv.rst zipapp.rst diff --git a/Doc/library/distutils.rst b/Doc/library/distutils.rst deleted file mode 100644 index 31c4ae5b239..00000000000 --- a/Doc/library/distutils.rst +++ /dev/null @@ -1,49 +0,0 @@ -:mod:`distutils` --- Building and installing Python modules -=========================================================== - -.. module:: distutils - :synopsis: Support for building and installing Python modules into an - existing Python installation. - -.. sectionauthor:: Fred L. Drake, Jr. - --------------- - -:mod:`distutils` is deprecated with removal planned for Python 3.12. -See the :ref:`What's New ` entry for more information. - --------------- - -The :mod:`distutils` package provides support for building and installing -additional modules into a Python installation. The new modules may be either -100%-pure Python, or may be extension modules written in C, or may be -collections of Python packages which include modules coded in both Python and C. - -Most Python users will *not* want to use this module directly, but instead -use the cross-version tools maintained by the Python Packaging Authority. In -particular, -`setuptools `__ is an -enhanced alternative to :mod:`distutils` that provides: - -* support for declaring project dependencies -* additional mechanisms for configuring which files to include in source - releases (including plugins for integration with version control systems) -* the ability to declare project "entry points", which can be used as the - basis for application plugin systems -* the ability to automatically generate Windows command line executables at - installation time rather than needing to prebuild them -* consistent behaviour across all supported Python versions - -The recommended `pip `__ installer runs all -``setup.py`` scripts with ``setuptools``, even if the script itself only -imports ``distutils``. Refer to the -`Python Packaging User Guide `_ for more -information. - -For the benefits of packaging tool authors and users seeking a deeper -understanding of the details of the current packaging and distribution -system, the legacy :mod:`distutils` based user documentation and API -reference remain available: - -* :ref:`install-index` -* :ref:`distutils-index` diff --git a/Doc/library/sysconfig.rst b/Doc/library/sysconfig.rst index fa18d62d22a..02498877703 100644 --- a/Doc/library/sysconfig.rst +++ b/Doc/library/sysconfig.rst @@ -25,7 +25,7 @@ Configuration variables A Python distribution contains a :file:`Makefile` and a :file:`pyconfig.h` header file that are necessary to build both the Python binary itself and -third-party C extensions compiled using :mod:`distutils`. +third-party C extensions compiled using ``setuptools``. :mod:`sysconfig` puts all variables found in these files in a dictionary that can be accessed using :func:`get_config_vars` or :func:`get_config_var`. diff --git a/Doc/library/venv.rst b/Doc/library/venv.rst index 3cf143d552a..513a982c6ed 100644 --- a/Doc/library/venv.rst +++ b/Doc/library/venv.rst @@ -64,7 +64,7 @@ Creating virtual environments Python installation). When a virtual environment is active, any options that change the - installation path will be ignored from all :mod:`distutils` configuration + installation path will be ignored from all ``setuptools`` configuration files to prevent projects being inadvertently installed outside of the virtual environment. diff --git a/Doc/using/configure.rst b/Doc/using/configure.rst index 80c0dc08dae..580cbd814f7 100644 --- a/Doc/using/configure.rst +++ b/Doc/using/configure.rst @@ -599,7 +599,7 @@ Main files of the build system * :file:`pyconfig.h` (created by :file:`configure`); * :file:`Modules/Setup`: C extensions built by the Makefile using :file:`Module/makesetup` shell script; -* :file:`setup.py`: C extensions built using the :mod:`distutils` module. +* :file:`setup.py`: C extensions built using the ``setuptools`` package. Main build steps ---------------- diff --git a/Doc/using/windows.rst b/Doc/using/windows.rst index 7d2fcb586b3..1025c14e397 100644 --- a/Doc/using/windows.rst +++ b/Doc/using/windows.rst @@ -1187,11 +1187,10 @@ shipped with PyWin32. It is an embeddable IDE with a built-in debugger. cx_Freeze --------- -`cx_Freeze `_ is a :mod:`distutils` -extension (see :ref:`extending-distutils`) which wraps Python scripts into -executable Windows programs (:file:`{*}.exe` files). When you have done this, -you can distribute your application without requiring your users to install -Python. +`cx_Freeze `_ is a ``distutils`` +extension which wraps Python scripts into executable Windows programs +(:file:`{*}.exe` files). When you have done this, you can distribute your +application without requiring your users to install Python. Compiling Python on Windows diff --git a/Doc/whatsnew/2.7.rst b/Doc/whatsnew/2.7.rst index f753055c16e..59d68a192b8 100644 --- a/Doc/whatsnew/2.7.rst +++ b/Doc/whatsnew/2.7.rst @@ -2697,7 +2697,7 @@ projects. However, as this migration is currently still incomplete, the legacy versions of those guides remaining available as :ref:`install-index` -and :ref:`distutils-index`. +and :ref:`setuptools-index`. .. seealso:: diff --git a/Doc/whatsnew/3.4.rst b/Doc/whatsnew/3.4.rst index a09b60ffb33..95e86550bc0 100644 --- a/Doc/whatsnew/3.4.rst +++ b/Doc/whatsnew/3.4.rst @@ -247,7 +247,7 @@ projects. However, as this migration is currently still incomplete, the legacy versions of those guides remaining available as :ref:`install-index` -and :ref:`distutils-index`. +and :ref:`setuptools-index`. .. seealso::