cpython/Mac/Lib/macerrors.py

627 lines
35 KiB
Python
Raw Normal View History

svTempDisable = -32768 #Temporarily disable card but run primary init.
svDisabled = -32640 #Reserve range -32640 to -32768 for Apple temp disables.
fontNotOutlineErr = -32615 #bitmap font passed to routine that does outlines only
invalidIndexErr = -20002 #The recordIndex parameter is not valid.
recordDataTooBigErr = -20001 #The record data is bigger than buffer size (1024 bytes).
unknownInsertModeErr = -20000 #There is no such an insert mode.
pmRecvEndErr = -13005 #during receive, pmgr did not finish hs configured for this connection
pmRecvStartErr = -13004 #during receive, pmgr did not start hs
pmSendEndErr = -13003 #during send, pmgr did not finish hs
pmSendStartErr = -13002 #during send, pmgr did not start hs
pmReplyTOErr = -13001 #Timed out waiting for reply
pmBusyErr = -13000 #Power Mgr never ready to start handshake
pictureDataErr = -11005 #the picture data was invalid
colorsRequestedErr = -11004 #the number of colors requested was illegal
cantLoadPickMethodErr = -11003 #unable to load the custom pick proc
pictInfoVerbErr = -11002 #the passed verb was invalid
pictInfoIDErr = -11001 #the internal consistancy check for the PictInfoID is wrong
pictInfoVersionErr = -11000 #wrong version of the PictInfo structure
telNotEnoughdspBW = -10116 #not enough real-time for allocation
telBadSampleRate = -10115 #incompatible sample rate
telBadSWErr = -10114 #Software not installed properly
telDetAlreadyOn = -10113 #detection is already turned on
telAutoAnsNotOn = -10112 #autoAnswer in not turned on
telValidateFailed = -10111 #telValidate failed
telBadProcID = -10110 #invalid procID
telDeviceNotFound = -10109 #device not found
telBadCodeResource = -10108 #code resource not found
telInitFailed = -10107 #initialization failed
telNoCommFolder = -10106 #Communications/Extensions <20> not found
telUnknownErr = -10103 #unable to set config
telNoSuchTool = -10102 #unable to find tool with name specified
telBadFunction = -10091 #bad msgCode specified
telPBErr = -10090 #parameter block error, bad format
telCANotDeflectable = -10082 #CA not "deflectable"
telCANotRejectable = -10081 #CA not "rejectable"
telCANotAcceptable = -10080 #CA not "acceptable"
telTermNotOpen = -10072 #terminal not opened via TELOpenTerm
telStillNeeded = -10071 #terminal driver still needed by someone else
telAlreadyOpen = -10070 #terminal already open
telNoCallbackRef = -10064 #no call back reference was specified, but is required
telDisplayModeNotSupp = -10063 #display mode not supported by tool
telBadDisplayMode = -10062 #bad display mode specified
telFwdTypeNotSupp = -10061 #forward type not supported by tool
telDNTypeNotSupp = -10060 #DN type not supported by tool
telBadRate = -10059 #bad rate specified
telBadBearerType = -10058 #bad bearerType specified
telBadSelect = -10057 #unable to select or deselect DN
telBadParkID = -10056 #bad park id specified
telBadPickupGroupID = -10055 #bad pickup group ID specified
telBadFwdType = -10054 #bad fwdType specified
telBadFeatureID = -10053 #bad feature ID specified
telBadIntercomID = -10052 #bad intercom ID specified
telBadPageID = -10051 #bad page ID specified
telBadDNType = -10050 #DN type invalid
telConfLimitExceeded = -10047 #attempt to exceed switch conference limits
telCBErr = -10046 #call back feature not set previously
telTransferRej = -10045 #transfer request rejected
telTransferErr = -10044 #transfer not prepared
telConfRej = -10043 #conference request was rejected
telConfErr = -10042 #conference was not prepared
telConfNoLimit = -10041 #no limit was specified but required
telConfLimitErr = -10040 #limit specified is too high for this configuration
telFeatNotSupp = -10033 #feature program call not supported by this tool
telFeatActive = -10032 #feature already active
telFeatNotAvail = -10031 #feature subscribed but not available
telFeatNotSub = -10030 #feature not subscribed
telDNDTypeNotSupp = -10024 #DND type is not supported by this tool
telBadDNDType = -10023 #bad DND type specified
telIntExtNotSupp = -10022 #internal external type not supported by this tool
telBadIntExt = -10021 #bad internal external error
telStateNotSupp = -10020 #device state not supported by tool
telBadStateErr = -10019 #bad device state specified
telIndexNotSupp = -10018 #index not supported by this tool
telBadIndex = -10017 #bad index specified
telAPattNotSupp = -10016 #alerting pattern not supported by tool
telBadAPattErr = -10015 #bad alerting pattern specified
telVTypeNotSupp = -10014 #volume type not supported by this tool
telBadVTypeErr = -10013 #bad volume type error
telBadLevelErr = -10012 #bad volume level setting
telHTypeNotSupp = -10011 #hook type not supported by this tool
telBadHTypeErr = -10010 #bad hook type specified
telNoOpenErr = -10008 #unable to open terminal
telNoMemErr = -10007 #no memory to allocate handle
telCAUnavail = -10006 #a CA is not available
telBadProcErr = -10005 #bad msgProc specified
telBadHandErr = -10004 #bad handle specified
telBadCAErr = -10003 #TELCAHandle not found or invalid
telBadDNErr = -10002 #TELDNHandle not found or invalid
telBadTermErr = -10001 #invalid TELHandle or handle not found
kDMMainDisplayCannotMoveErr = -6231 #Trying to move main display (or a display mirrored to it)
kDMDisplayAlreadyInstalledErr = -6230 #Attempt to add an already installed display.
kDMDisplayNotFoundErr = -6229 #Could not find item (will someday remove).
kDMDriverNotDisplayMgrAwareErr = -6228 #Video Driver does not support display manager.
kDMSWNotInitializedErr = -6227 #Required software not initialized (eg windowmanager or display mgr).
kSysSWTooOld = -6226 #Missing critical pieces of System Software.
kDMMirroringNotOn = -6225 #Returned by all calls that need mirroring to be on to do their thing.
kDMCantBlock = -6224 #Mirroring is already on, can<61>t Block now (call DMUnMirror() first).
kDMMirroringBlocked = -6223 #DMBlockMirroring() has been called.
kDMWrongNumberOfDisplays = -6222 #Can only handle 2 displays for now.
kDMMirroringOnAlready = -6221 #Returned by all calls that need mirroring to be off to do their thing.
kDMGenErr = -6220 #Unexpected Error
gestaltLocationErr = -5553 #gestalt function ptr wasn't in sysheap
gestaltDupSelectorErr = -5552 #tried to add an entry that already existed
gestaltUndefSelectorErr = -5551 #undefined selector was passed to Gestalt
gestaltUnknownErr = -5550 #value returned if Gestalt doesn't know the answer
envVersTooBig = -5502 #Version bigger than call can handle
envBadVers = -5501 #Version non-positive
envNotPresent = -5500 #returned by glue.
afpInsideTrashErr = -5044 #the folder being shared is inside the trash folder OR the shared folder is being moved into the trash folder OR the folder is being moved to the trash and it contains a shared folder
afpInsideSharedErr = -5043 #the folder being shared is inside a shared folder OR the folder contains a shared folder and is being moved into a shared folder OR the folder contains a shared folder and is being moved into the descendent of a shared folder.
afpPwdExpiredErr = -5042 #the password being used is too old: this requires the user to change the password before log-in can continue
afpPwdTooShortErr = -5041 #the password being set is too short: there is a minimum length that must be met or exceeded
afpPwdSameErr = -5040 #someone tried to change their password to the same password on a mantadory password change
afpContainsSharedErr = -5033 #the folder being shared contains a shared folder
afpObjectLocked = -5032 #Object is M/R/D/W inhibited
afpVolLocked = -5031 #Volume is Read-Only
couldNotParseSourceFileErr = -3026 #Source document does not contain source type
invalidTranslationPathErr = -3025 #Source type to destination type not a valid path
fragLastErrCode = -2899 #last reserved error code number
fragInvalidFragmentUsage = -2824 #an application fragment or accellerated resource has no entry point or termination routine
fragArchError = -2823 #fragment targeted for an unacceptable architecture
fragAppNotFound = -2822 #no application found in cfrg (for Process Manager)
fragUserInitProcErr = -2821 #user intialization routine did not return noErr
fragCorruptErr = -2820 #fragment container corrupted (known format)
fragConstErr = -2819 #internal inconstistancy
fragMgrInitErr = -2818 #error in initailization of this manager
fragLibConnErr = -2817 #error connecting to library (error occured in sub prepare)
fragInitRtnUsageErr = -2816 #boot library has initialization routine
fragInitLoop = -2815 #circularity detected in mandatory initialization order
fragImportTooNew = -2814 #import library was too new and therefore incompatible
fragImportTooOld = -2813 #import library was too old and therefore incompatible
fragObjectInitSeqErr = -2812 #order error during user initialization function invocation
fragNoContextIDs = -2811 #no more context id<69>s
fragNoAddrSpace = -2810 #out of memory in user's address space for loadable section
fragNoMem = -2809 #out of memory for interal bookkeeping
fragUnused1 = -2808 #unused
fragHadUnresolveds = -2807 #loaded fragment had "hard" unresolved imports
fragFormatUnknown = -2806 #fragment container format unknown
fragDupRegLibName = -2805 #registered name already in use
fragLibNotFound = -2804 #library name not found in Frag registry
fragSectionNotFound = -2803 #section was not found
fragSymbolNotFound = -2802 #symbol was not found in connection
fragConnectionIDNotFound = -2801 #connecionID was not valid
fragContextNotFound = -2800 #contextID was not valid
nrPathBufferTooSmall = -2551 #buffer for path is too small
nrPathNotFound = -2550 #a path component lookup failed
tsmUnknownErr = -2519 #any other errors
tsmUnsupportedTypeErr = -2518 #unSupported interface type error
tsmScriptHasNoIMErr = -2517 #script has no imput method or is using old IM
tsmInputMethodIsOldErr = -2516 #returned by GetDefaultInputMethod
tsmComponentAlreadyOpenErr = -2515 #text service already opened for the document
tsmTSNotOpenErr = -2514 #text service is not open
tsmTSHasNoMenuErr = -2513 #the text service has no menu
tsmUseInputWindowErr = -2512 #not TSM aware because we are using input window
tsmDocumentOpenErr = -2511 #there are open documents
tsmTextServiceNotFoundErr = -2510 #no text service found
tsmCantOpenComponentErr = -2509 #can<61>t open the component
tsmNoOpenTSErr = -2508 #no open text service
tsmDocNotActiveErr = -2507 #document is NOT active
tsmTSMDocBusyErr = -2506 #document is still active
tsmInvalidDocIDErr = -2505 #invalid TSM documentation id
tsmNeverRegisteredErr = -2504 #app never registered error (not TSM aware)
tsmAlreadyRegisteredErr = -2503 #want to register again error
tsmNotAnAppErr = -2502 #not an application error
badCallOrderErr = -2209 #Usually due to a status call being called prior to being setup first
noDMAErr = -2208 #Can<61>t do DMA digitizing (i.e. can't go to requested dest
badDepthErr = -2207 #Can<61>t digitize into this depth
notExactSizeErr = -2206 #Can<61>t do exact size requested
noMoreKeyColorsErr = -2205 #all key indexes in use
notExactMatrixErr = -2204 #warning of bad matrix, digitizer did its best
matrixErr = -2203 #bad matrix, digitizer did nothing
qtParamErr = -2202 #bad input parameter (out of range, etc)
digiUnimpErr = -2201 #feature unimplemented
soundSupportNotAvailableErr = -2056 #QT for Windows error
noSoundTrackInMovieErr = -2055 #QT for Windows error
noVideoTrackInMovieErr = -2054 #QT for Windows error
cantCreateSingleForkFile = -2022 #happens when file already exists
dragNotAcceptedErr = -1857 #drag was not accepted by receiver
handlerNotFoundErr = -1856 #handler not found
duplicateHandlerErr = -1855 #handler already exists
cantGetFlavorErr = -1854 #error while trying to get flavor data
duplicateFlavorErr = -1853 #flavor type already exists
badDragFlavorErr = -1852 #unknown flavor type
badDragItemErr = -1851 #unknown drag item reference
badDragRefErr = -1850 #unknown drag reference
errOSACantOpenComponent = -1762 #Can't connect to scripting system with that ID
errOSAComponentMismatch = -1761 #Parameters are from 2 different components
errAERecordingIsAlreadyOn = -1732 #available only in version 1.0.1 or greater
errAEUnknownObjectType = -1731 #available only in version 1.0.1 or greater
errAEEmptyListContainer = -1730 #Attempt to pass empty list as container to accessor
errAENegativeCount = -1729 #CountProc returned negative value
errAENoSuchObject = -1728 #e.g.,: specifier asked for the 3rd, but there are only 2. Basically, this indicates a run-time resolution error.
errAENotAnObjSpec = -1727 #Param to AEResolve not of type 'obj '
errAEBadTestKey = -1726 #Test is neither typeLogicalDescriptor nor typeCompDescriptor
errAENoSuchLogical = -1725 #Something other than AND, OR, or NOT
errAEAccessorNotFound = -1723 #Accessor proc matching wantClass and containerType or wildcards not found
errAEWrongNumberArgs = -1721 #Logical op kAENOT used with other than 1 term
errAEImpossibleRange = -1720 #A range like 3rd to 2nd, or 1st to all.
errAEIllegalIndex = -1719 #index is out of range in a put operation
errAEReplyNotArrived = -1718 #the contents of the reply you are accessing have not arrived yet
errAEHandlerNotFound = -1717 #no handler in the dispatch tables fits the parameters to AEGetEventHandler or AEGetCoercionHandler
errAEUnknownAddressType = -1716 #the target address type is not known
errAEParamMissed = -1715 #a required parameter was not accessed
errAENotASpecialFunction = -1714 #there is no special function for/with this keyword
errAENoUserInteraction = -1713 #no user interaction is allowed
errAETimeout = -1712 #the AppleEvent timed out
errAEWaitCanceled = -1711 #in AESend, the user cancelled out of wait loop for reply or receipt
errAEUnknownSendMode = -1710 #mode wasn't NoReply, WaitReply, or QueueReply or Interaction level is unknown
errAEReplyNotValid = -1709 #AEResetTimer was passed an invalid reply parameter
errAEEventNotHandled = -1708 #the AppleEvent was not handled by any handler
errAENotAppleEvent = -1707 #the event is not in AppleEvent format
errAENewerVersion = -1706 #need newer version of the AppleEvent manager
errAEBadListItem = -1705 #the specified list item does not exist
errAECoercionFail = -1700 #bad parameter data or unable to coerce the data supplied
fsDataTooBigErr = -1310 #file or volume is too big for system
fileBoundsErr = -1309 #file's EOF, offset, mark or size is too big
notARemountErr = -1308 #when _Mount allows only remounts and doesn't get one
badFidErr = -1307 #file id is dangling or doesn't match with the file number
sameFileErr = -1306 #can't exchange a file with itself
desktopDamagedErr = -1305 #desktop database files are corrupted
catChangedErr = -1304 #the catalog has been modified
diffVolErr = -1303 #files on different volumes
notAFileErr = -1302 #directory specified
fidExists = -1301 #file id already exists
fidNotFound = -1300 #no file thread exists.
errRefNum = -1280 #bad connection refNum
errAborted = -1279 #control call was aborted
errState = -1278 #bad connection state for this operation
errOpening = -1277 #open connection request failed
errAttention = -1276 #attention message too long
errFwdReset = -1275 #read terminated by forward reset
errDSPQueueSize = -1274 #DSP Read/Write Queue Too small
errOpenDenied = -1273 #open connection request was denied
aspNoAck = -1075 #No ack on attention request (server err)
aspTooMany = -1074 #Too many clients (server error)
aspSizeErr = -1073 #Command block too big
aspSessClosed = -1072 #Session closed
aspServerBusy = -1071 #Server cannot open another session
aspParamErr = -1070 #Parameter error
aspNoServers = -1069 #No servers at that address
aspNoMoreSess = -1068 #No more sessions on server
aspBufTooSmall = -1067 #Buffer too small
aspBadVersNum = -1066 #Server cannot support this ASP version
nbpNISErr = -1029 #Error trying to open the NIS
nbpNotFound = -1028 #Name not found on remove
nbpDuplicate = -1027 #Duplicate name exists already
nbpConfDiff = -1026 #Name confirmed at different socket
nbpBuffOvr = -1024 #Buffer overflow in LookupName
noMaskFoundErr = -1000 #Icon Utilties Error
guestNotAllowedErr = -932 #destination port requires authentication
badLocNameErr = -931 #location name malformed
badServiceMethodErr = -930 #illegal service type, or not supported
noUserRecErr = -928 #Invalid user reference number
authFailErr = -927 #unable to authenticate user at destination
noInformErr = -926 #PPCStart failed because destination did not have inform pending
networkErr = -925 #An error has occured in the network, not too likely
noUserRefErr = -924 #unable to create a new userRefNum
notLoggedInErr = -923 #The default userRefNum does not yet exist
noDefaultUserErr = -922 #user hasn't typed in owners name in Network Setup Control Pannel
badPortNameErr = -919 #PPCPortRec malformed
sessClosedErr = -917 #session was closed
portClosedErr = -916 #port was closed
noResponseErr = -915 #unable to contact destination
noToolboxNameErr = -914 #A system resource is missing, not too likely
noMachineNameErr = -913 #user hasn't named his Macintosh in the Network Setup Control Panel
userRejectErr = -912 #Destination rejected the session request
noUserNameErr = -911 #user name unknown on destination machine
portNameExistsErr = -910 #port is already open (perhaps in another app)
badReqErr = -909 #bad parameter or invalid state for operation
noSessionErr = -908 #Invalid session reference number
sessTableErr = -907 #Out of session tables, try again later
destPortErr = -906 #Port does not exist at destination
localOnlyErr = -905 #Network activity is currently disabled
noGlobalsErr = -904 #The system is hosed, better re-boot
noPortErr = -903 #Unable to open port or bad portRefNum
nameTypeErr = -902 #Invalid or inappropriate locationKindSelector in locationName
notInitErr = -900 #PPCToolBox not initialized
hmCloseViewActive = -863 #Returned from HMRemoveBalloon if CloseView was active
hmNoBalloonUp = -862 #Returned from HMRemoveBalloon if no balloon was visible when call was made
hmOperationUnsupported = -861 #Returned from HMShowBalloon call if bad method passed to routine
hmUnknownHelpType = -859 #Returned if help msg record contained a bad type
hmWrongVersion = -858 #Returned if help mgr resource was the wrong version
hmSkippedBalloon = -857 #Returned from calls if helpmsg specified a skip balloon
hmHelpManagerNotInited = -855 #Returned from HMGetHelpMenuHandle if help menu not setup
hmSameAsLastBalloon = -854 #Returned from HMShowMenuBalloon if menu & item is same as last time
hmBalloonAborted = -853 #Returned if mouse was moving or mouse wasn't in window port rect
hmHelpDisabled = -850 #Show Balloons mode was off, call to routine ignored
rcDBPackNotInited = -813 #attempt to call other routine before InitDBPack
rcDBWrongVersion = -812 #incompatible versions
rcDBNoHandler = -811 #no app handler for specified data type
rcDBBadAsyncPB = -810 #tried to kill a bad pb
rcDBAsyncNotSupp = -809 #ddev does not support async calls
rcDBBadDDEV = -808 #bad ddev specified on DBInit
rcDBBadSessNum = -807 #bad session number for DBGetConnInfo
noMMUErr = -626 #no MMU present
cannotDeferErr = -625 #unable to defer additional functions
interruptsMaskedErr = -624 #don<6F>t call with interrupts masked
notLockedErr = -623 #specified range of memory is not locked
cannotMakeContiguousErr = -622 #cannot make specified range contiguous
notHeldErr = -621 #specified range of memory is not held
notEnoughMemoryErr = -620 #insufficient physical memory
noUserInteractionAllowed = -610 #no user interaction allowed
bufferIsSmall = -607 #error returns from Post and Accept
appIsDaemon = -606 #app is BG-only, and launch flags disallow this
appMemFullErr = -605 #application SIZE not big enough for launch
hardwareConfigErr = -604 #hardware configuration not correct for call
protocolErr = -603 #app made module calls in improper order
appModeErr = -602 #memory mode is 32-bit, but app not 32-bit clean
memFragErr = -601 #not enough room to launch app w/special requirements
procNotFound = -600 #no eligible process with specified descriptor
hwParamErr = -502 #bad selector for _HWPriv
teScrapSizeErr = -501 #scrap item too big for text edit record
exUserBreak = -492 #user debugger break; execute debugger commands on stack
strUserBreak = -491 #user debugger break; display string on stack
userBreak = -490 #user debugger break
notThePublisherWrn = -463 #not the first registered publisher for that container
containerAlreadyOpenWrn = -462 #container already opened by this section
containerNotFoundWrn = -461 #could not find editionContainer at this time
multiplePublisherWrn = -460 #A Publisher is already registered for that container
badSubPartErr = -454 #can not use sub parts in this release
badEditionFileErr = -453 #edition file is corrupt
notRegisteredSectionErr = -452 #not a registered SectionRecord
badSectionErr = -451 #not a valid SectionRecord
editionMgrInitErr = -450 #edition manager not inited by this app
btKeyAttrErr = -417 #There is no such a key attribute.
btKeyLenErr = -416 #Maximum key length is too long or equal to zero.
btRecNotFnd = -415 #Record cannot be found.
btDupRecErr = -414 #Record already exists.
btNoSpace = -413 #Can't allocate disk space.
notBTree = -410 #The file is not a dictionary.
gcrOnMFMErr = -400 #gcr format on high density media error
slotNumErr = -360 #invalid slot # error
smRecNotFnd = -351 #Record not found in the SRT.
smSRTOvrFlErr = -350 #SRT over flow.
smNoGoodOpens = -349 #No opens were successfull in the loop.
smOffsetErr = -348 #Offset was too big (temporary error
smByteLanesErr = -347 #NumByteLanes was determined to be zero.
smBadsPtrErr = -346 #Bad pointer was passed to sCalcsPointer
smsGetDrvrErr = -345 #Error occurred during _sGetDriver.
smNoMoresRsrcs = -344 #No more sResources
smDisDrvrNamErr = -343 #Error occured during _sDisDrvrName.
smGetDrvrNamErr = -342 #Error occured during _sGetDrvrName.
smCkStatusErr = -341 #Status of slot = fail.
smBlkMoveErr = -340 #_BlockMove error
smNewPErr = -339 #_NewPtr error
smSelOOBErr = -338 #Selector out of bounds error
smSlotOOBErr = -337 #Slot out of bounds error
smNilsBlockErr = -336 #Nil sBlock error (Dont allocate and try to use a nil sBlock)
smsPointerNil = -335 #LPointer is nil From sOffsetData. If this error occurs; check sInfo rec for more information.
smCPUErr = -334 #Code revision is wrong
smCodeRevErr = -333 #Code revision is wrong
smReservedErr = -332 #Reserved field not zero
smBadsList = -331 #Bad sList: Id1 < Id2 < Id3 ...format is not followed.
smBadRefId = -330 #Reference Id not found in List
smBusErrTO = -320 #BusError time out.
smBadBoardId = -319 #BoardId was wrong; re-init the PRAM record.
smNoJmpTbl = -318 #SDM jump table could not be created.
smInitTblVErr = -317 #An error occured while trying to initialize the Slot Resource Table.
smInitStatVErr = -316 #The InitStatusV field was negative after primary or secondary init.
smNoBoardId = -315 #No Board Id.
smGetPRErr = -314 #Error occured during _sGetPRAMRec (See SIMStatus).
smNoBoardSRsrc = -313 #No Board sResource.
smDisposePErr = -312 #_DisposePointer error
smFHBlkDispErr = -311 #Error occured during _sDisposePtr (Dispose of FHeader block).
smFHBlockRdErr = -310 #Error occured during _sGetFHeader.
smBLFieldBad = -309 #ByteLanes field was bad.
smUnExBusErr = -308 #Unexpected BusError
smResrvErr = -307 #Fatal reserved error. Resreved field <> 0.
smNosInfoArray = -306 #No sInfoArray. Memory Mgr error.
smDisabledSlot = -305 #This slot is disabled (-305 use to be smLWTstBad)
smNoDir = -304 #Directory offset is Nil
smRevisionErr = -303 #Wrong revison level
smFormatErr = -302 #FHeader Format is not Apple's
smCRCFail = -301 #CRC check failed for declaration data
smEmptySlot = -300 #No card in slot
nmTypErr = -299 #wrong queue type
smPriInitErr = -293 #Error; Cards could not be initialized.
smPRAMInitErr = -292 #Error; Slot Resource Table could not be initialized.
smSRTInitErr = -291 #Error; Slot Resource Table could not be initialized.
smSDMInitErr = -290 #Error; SDM could not be initialized.
midiInvalidCmdErr = -261 #command not supported for port type
midiDupIDErr = -260 #duplicate client ID
midiNameLenErr = -259 #name supplied is longer than 31 characters
midiWriteErr = -258 #MIDIWritePacket couldn't write to all connected ports
midiNoConErr = -257 #no connection exists between specified ports
midiVConnectRmvd = -256 #pending virtual connection removed
midiVConnectMade = -255 #pending virtual connection resolved
midiVConnectErr = -254 #pending virtual connection created
midiTooManyConsErr = -253 #too many connections made
midiTooManyPortsErr = -252 #too many ports already installed in the system
midiNoPortErr = -251 #no port with that ID found
midiNoClientErr = -250 #no client with that ID found
siUnknownQuality = -232 #invalid quality selector (returned by driver)
siUnknownInfoType = -231 #invalid info type selector (returned by driver)
siInputDeviceErr = -230 #input device hardware failure
siBadRefNum = -229 #invalid input device reference number
siBadDeviceName = -228 #input device could not be opened
siDeviceBusyErr = -227 #input device already in use
siInvalidSampleSize = -226 #invalid sample size
siInvalidSampleRate = -225 #invalid sample rate
siHardDriveTooSlow = -224 #hard drive too slow to record to disk
siInvalidCompression = -223 #invalid compression type
siNoBufferSpecified = -222 #returned by synchronous SPBRecord if nil buffer passed
siBadSoundInDevice = -221 #invalid index passed to SoundInGetIndexedDevice
siNoSoundInHardware = -220 #no Sound Input hardware
noMoreRealTime = -212 #not enough CPU cycles left to add another task
buffersTooSmall = -210 #can not operate in the memory allowed
channelBusy = -209 #the Channel is being used for a PFD already
badFileFormat = -208 #was not type AIFF or was of bad format,corrupt
notEnoughBufferSpace = -207 #could not allocate enough memory
badFormat = -206 #Sound Manager Error Returns
badChannel = -205 #Sound Manager Error Returns
resProblem = -204 #Sound Manager Error Returns
queueFull = -203 #Sound Manager Error Returns
notEnoughHardwareErr = -201 #Sound Manager Error Returns
noHardwareErr = -200 #Sound Manager Error Returns
mapReadErr = -199 #map inconsistent with operation
resAttrErr = -198 #attribute inconsistent with operation
rmvRefFailed = -197 #RmveReference failed
rmvResFailed = -196 #RmveResource failed
addRefFailed = -195 #AddReference failed
addResFailed = -194 #AddResource failed
resFNotFound = -193 #Resource file not found
resNotFound = -192 #Resource not found
inputOutOfBounds = -190 #Offset of Count out of bounds
writingPastEnd = -189 #Writing past end of file
resourceInMemory = -188 #Resource already in memory
CantDecompress = -186 #resource bent ("the bends") - can't decompress a compressed resource
badExtResource = -185 #extended resource has a bad format.
cDepthErr = -157 #invalid pixel depth
cResErr = -156 #invalid resolution for MakeITable
cDevErr = -155 #invalid type of graphics device
cProtectErr = -154 #colorTable entry protection violation
cRangeErr = -153 #range error on colorTable request
cNoMemErr = -152 #failed to allocate memory for structure
cTempMemErr = -151 #failed to allocate memory for temporary structures
cMatchErr = -150 #Color2Index failed to find an index
hMenuFindErr = -127 #could not find HMenu's parent in MenuKey
mBarNFnd = -126 #system error code for MBDF not found
updPixMemErr = -125 #insufficient memory to update a pixmap
volGoneErr = -124 #Server volume has been disconnected.
wrgVolTypErr = -123 #Wrong volume type error [operation not supported for MFS]
badMovErr = -122 #Move into offspring error
tmwdoErr = -121 #No free WDCB available
dirNFErr = -120 #Directory not found
memLockedErr = -117 #trying to move a locked block (MoveHHi)
memSCErr = -116 #Size Check failed
memBCErr = -115 #Block Check failed
memPCErr = -114 #Pointer Check failed
memAZErr = -113 #Address in zone check failed
memPurErr = -112 #trying to purge a locked or non-purgeable block
memWZErr = -111 #WhichZone failed (applied to free block)
memAdrErr = -110 #address was odd; or out of range
nilHandleErr = -109 #Master Pointer was NIL in HandleZone or other
memFullErr = -108 #Not enough room in heap zone
noTypeErr = -102 #No object of that type in scrap
noScrapErr = -100 #No scrap exists error
memROZWarn = -99 #soft error in ROZ
portNotCf = -98 #driver Open error code (parameter RAM not configured for this connection)
portInUse = -97 #driver Open error code (port is in use)
portNotPwr = -96 #serial port not currently powered
excessCollsns = -95 #excessive collisions on write
lapProtErr = -94 #error in attaching/detaching protocol
noBridgeErr = -93 #no network bridge for non-local send
ddpLenErr = -92 #data length too big
ddpSktErr = -91 #error in soket number
breakRecd = -90 #Break received (SCC)
rcvrErr = -89 #SCC receiver error (framing; parity; OR)
prInitErr = -88 #InitUtil found the parameter ram uninitialized
prWrErr = -87 #parameter ram written didn't read-verify
clkWrErr = -86 #time written did not verify
clkRdErr = -85 #unable to read same clock value twice
firstDskErr = -84 #I/O System Errors
fmt2Err = -83 #can't get enough sync
fmt1Err = -82 #can't find sector 0 after track format
sectNFErr = -81 #sector number never found on a track
seekErr = -80 #track number wrong on address mark
spdAdjErr = -79 #unable to correctly adjust disk speed
twoSideErr = -78 #tried to read 2nd side on a 1-sided drive
initIWMErr = -77 #unable to initialize IWM
tk0BadErr = -76 #track 0 detect doesn't change
cantStepErr = -75 #step handshake failed
wrUnderrun = -74 #write underrun occurred
badDBtSlp = -73 #bad data mark bit slip nibbles
badDCksum = -72 #bad data mark checksum
noDtaMkErr = -71 #couldn't find a data mark header
badBtSlpErr = -70 #bad addr mark bit slip nibbles
badCksmErr = -69 #addr mark checksum didn't check
dataVerErr = -68 #read verify compare failed
noAdrMkErr = -67 #couldn't find valid addr mark
fontSubErr = -66 #font substitution occured
fontNotDeclared = -65 #font not declared
fontDecError = -64 #error during font declaration
wrPermErr = -61 #write permissions error
badMDBErr = -60 #bad master directory block
fsRnErr = -59 #file system internal error:during rename the old entry was deleted but could not be restored.
extFSErr = -58 #volume in question belongs to an external fs
noMacDskErr = -57 #not a mac diskette (sig bytes are wrong)
nsDrvErr = -56 #no such drive (tried to mount a bad drive num)
volOnLinErr = -55 #drive volume already on-line at MountVol
permErr = -54 #permissions error (on file open)
volOffLinErr = -53 #volume not on line error (was Ejected)
gfpErr = -52 #get file position error
rfNumErr = -51 #refnum error
paramErr = -50 #error in user parameter list
opWrErr = -49 #file already open with with write permission
dupFNErr = -48 #duplicate filename (rename)
fBsyErr = -47 #File is busy (delete)
vLckdErr = -46 #volume is locked
fLckdErr = -45 #file is locked
wPrErr = -44 #diskette is write protected.
fnfErr = -43 #File not found
tmfoErr = -42 #too many files open
mFulErr = -41 #memory full (open) or file won't fit (load)
posErr = -40 #tried to position to before start of file (r/w)
eofErr = -39 #End of file
fnOpnErr = -38 #File not open
bdNamErr = -37 #there may be no bad names in the final system!
ioErr = -36 #I/O error (bummers)
nsvErr = -35 #no such volume
dskFulErr = -34 #disk full
dirFulErr = -33 #Directory full
dceExtErr = -30 #dce extension error
unitTblFullErr = -29 #unit table has no more entries
notOpenErr = -28 #Couldn't rd/wr/ctl/sts cause driver not opened
abortErr = -27 #IO call aborted by KillIO
dInstErr = -26 #DrvrInstall couldn't find driver in resources
dRemovErr = -25 #tried to remove an open driver
closErr = -24 #I/O System Errors
openErr = -23 #I/O System Errors
unitEmptyErr = -22 #I/O System Errors
badUnitErr = -21 #I/O System Errors
writErr = -20 #I/O System Errors
readErr = -19 #I/O System Errors
statusErr = -18 #I/O System Errors
controlErr = -17 #I/O System Errors
dsExtensionsDisabled = -13 #say <20>Extensions Disabled<65>
dsHD20Installed = -12 #say <20>HD20 Startup<75>
dsDisassemblerInstalled = -11 #say <20>Disassembler Installed<65>
dsMacsBugInstalled = -10 #say <20>MacsBug Installed<65>
seNoDB = -8 #no debugger installed to handle debugger command
SlpTypeErr = -5 #invalid queue element
unimpErr = -4 #unimplemented core routine
corErr = -3 #core routine number out of range
vTypErr = -2 #invalid queue element
qErr = -1 #queue element not found during deletion
tsmComponentNoErr = 0 #component result = no error
EPERM = 1 #Operation not permitted
ENOENT = 2 #No such file or directory
ESRCH = 3 #No such process
EINTR = 4 #Interrupted system call
EIO = 5 #Input/output error
ENXIO = 6 #Device not configured
E2BIG = 7 #Argument list too long
ENOEXEC = 8 #Exec format error
EBADF = 9 #Bad file descriptor
ECHILD = 10 #No child processes
EDEADLK = 11 #Resource deadlock avoided
ENOMEM = 12 #Cannot allocate memory
EACCES = 13 #Permission denied
EFAULT = 14 #Bad address
ENOTBLK = 15 #Block device required
EBUSY = 16 #Device busy
EEXIST = 17 #File exists
EXDEV = 18 #Cross-device link
ENODEV = 19 #Operation not supported by device
ENOTDIR = 20 #Not a directory
EISDIR = 21 #Is a directory
EINVAL = 22 #Invalid argument
ENFILE = 23 #Too many open files in system
EMFILE = 24 #Too many open files
ENOTTY = 25 #Inappropriate ioctl for device
ETXTBSY = 26 #Text file busy
EFBIG = 27 #File too large
ENOSPC = 28 #No space left on device
ESPIPE = 29 #Illegal seek
EROFS = 30 #Read-only file system
EMLINK = 31 #Too many links
EPIPE = 32 #Broken pipe
EDOM = 33 #Numerical argument out of domain
ERANGE = 34 #Result too large
EAGAIN = 35 #Resource temporarily unavailable
EINPROGRESS = 36 #Operation now in progress
EALREADY = 37 #Operation already in progress
ENOTSOCK = 38 #Socket operation on non-socket
EDESTADDRREQ = 39 #Destination address required
EMSGSIZE = 40 #Message too long
EPROTOTYPE = 41 #Protocol wrong type for socket
ENOPROTOOPT = 42 #Protocol not available
EPROTONOSUPPORT = 43 #Protocol not supported
ESOCKTNOSUPPORT = 44 #Socket type not supported
EOPNOTSUPP = 45 #Operation not supported on socket
EPFNOSUPPORT = 46 #Protocol family not supported
EAFNOSUPPORT = 47 #Address family not supported by protocol family
EADDRINUSE = 48 #Address already in use
EADDRNOTAVAIL = 49 #Can't assign requested address
ENETDOWN = 50 #Network is down
ENETUNREACH = 51 #Network is unreachable
ENETRESET = 52 #Network dropped connection on reset
ECONNABORTED = 53 #Software caused connection abort
ECONNRESET = 54 #Connection reset by peer
ENOBUFS = 55 #No buffer space available
EISCONN = 56 #Socket is already connected
ENOTCONN = 57 #Socket is not connected
ESHUTDOWN = 58 #Can't send after socket shutdown
ETOOMANYREFS = 59 #Too many references: can't splice
ETIMEDOUT = 60 #Connection timed out
ECONNREFUSED = 61 #Connection refused
ELOOP = 62 #Too many levels of symbolic links
ENAMETOOLONG = 63 #File name too long
EHOSTDOWN = 64 #Host is down
EHOSTUNREACH = 65 #No route to host
ENOTEMPTY = 66 #Directory not empty
EPROCLIM = 67 #Too many processes
EUSERS = 68 #Too many users
EDQUOT = 69 #Disc quota exceeded
ESTALE = 70 #Stale NFS file handle
EREMOTE = 71 #Too many levels of remote in path
EBADRPC = 72 #RPC struct is bad
ERPCMISMATCH = 73 #RPC version wrong
EPROGUNAVAIL = 74 #RPC prog. not avail
EPROGMISMATCH = 75 #Program version wrong
EPROCUNAVAIL = 76 #Bad procedure for program
ENOLCK = 77 #No locks available
ENOSYS = 78 #Function not implemented
EFTYPE = 79 #Inappropriate file type or format