cpython/Objects/dictobject.c

1694 lines
40 KiB
C
Raw Normal View History

/* Dictionary object implementation using a hash table */
1997-05-02 00:12:38 -03:00
#include "Python.h"
/*
* MINSIZE is the minimum size of a dictionary.
*/
#define MINSIZE 4
/* define this out if you don't want conversion statistics on exit */
#undef SHOW_CONVERSION_COUNTS
/*
Table of irreducible polynomials to efficiently cycle through
GF(2^n)-{0}, 2<=n<=30. A table size is always a power of 2.
*/
static long polys[] = {
4 + 3,
8 + 3,
16 + 3,
32 + 5,
64 + 3,
128 + 3,
256 + 29,
512 + 17,
1024 + 9,
2048 + 5,
4096 + 83,
8192 + 27,
16384 + 43,
32768 + 3,
65536 + 45,
131072 + 9,
262144 + 39,
524288 + 39,
1048576 + 9,
2097152 + 5,
4194304 + 3,
8388608 + 33,
16777216 + 27,
33554432 + 9,
67108864 + 71,
134217728 + 39,
268435456 + 9,
536870912 + 5,
1073741824 + 83,
0
};
/* Object used as dummy key to fill deleted entries */
static PyObject *dummy; /* Initialized by first call to newdictobject() */
/*
There are three kinds of slots in the table:
1. Unused. me_key == me_value == NULL
Does not hold an active (key, value) pair now and never did. Unused can
transition to Active upon key insertion. This is the only case in which
me_key is NULL, and is each slot's initial state.
2. Active. me_key != NULL and me_key != dummy and me_value != NULL
Holds an active (key, value) pair. Active can transition to Dummy upon
key deletion. This is the only case in which me_value != NULL.
3. Dummy. me_key == dummy and me_value == NULL
Previously held an active (key, value) pair, but that was deleted and an
active pair has not yet overwritten the slot. Dummy can transition to
Active upon key insertion. Dummy slots cannot be made Unused again
(cannot have me_key set to NULL), else the probe sequence in case of
collision would have no way to know they were once active.
Note: .popitem() abuses the me_hash field of an Unused or Dummy slot to
hold a search finger. The me_hash field of Unused or Dummy slots has no
meaning otherwise.
*/
typedef struct {
long me_hash; /* cached hash code of me_key */
1997-05-02 00:12:38 -03:00
PyObject *me_key;
PyObject *me_value;
#ifdef USE_CACHE_ALIGNED
long aligner;
#endif
} dictentry;
/*
To ensure the lookup algorithm terminates, there must be at least one Unused
slot (NULL key) in the table.
The value ma_fill is the number of non-NULL keys (sum of Active and Dummy);
ma_used is the number of non-NULL, non-dummy keys (== the number of non-NULL
values == the number of Active items).
To avoid slowing down lookups on a near-full table, we resize the table when
it's two-thirds full.
*/
typedef struct dictobject dictobject;
struct dictobject {
1997-05-02 00:12:38 -03:00
PyObject_HEAD
int ma_fill; /* # Active + # Dummy */
int ma_used; /* # Active */
int ma_size; /* total # slots in ma_table */
int ma_poly; /* appopriate entry from polys vector */
dictentry *ma_table;
dictentry *(*ma_lookup)(dictobject *mp, PyObject *key, long hash);
};
/* forward declarations */
static dictentry *
lookdict_string(dictobject *mp, PyObject *key, long hash);
#ifdef SHOW_CONVERSION_COUNTS
static long created = 0L;
static long converted = 0L;
static void
show_counts(void)
{
fprintf(stderr, "created %ld string dicts\n", created);
fprintf(stderr, "converted %ld to normal dicts\n", converted);
fprintf(stderr, "%.2f%% conversion rate\n", (100.0*converted)/created);
}
#endif
1997-05-02 00:12:38 -03:00
PyObject *
PyDict_New(void)
{
register dictobject *mp;
if (dummy == NULL) { /* Auto-initialize dummy */
1997-05-02 00:12:38 -03:00
dummy = PyString_FromString("<dummy key>");
if (dummy == NULL)
return NULL;
#ifdef SHOW_CONVERSION_COUNTS
Py_AtExit(show_counts);
#endif
}
mp = PyObject_NEW(dictobject, &PyDict_Type);
if (mp == NULL)
return NULL;
mp->ma_size = 0;
mp->ma_poly = 0;
mp->ma_table = NULL;
mp->ma_fill = 0;
mp->ma_used = 0;
mp->ma_lookup = lookdict_string;
#ifdef SHOW_CONVERSION_COUNTS
++created;
#endif
PyObject_GC_Init(mp);
1997-05-02 00:12:38 -03:00
return (PyObject *)mp;
}
/*
The basic lookup function used by all operations.
This is based on Algorithm D from Knuth Vol. 3, Sec. 6.4.
Open addressing is preferred over chaining since the link overhead for
chaining would be substantial (100% with typical malloc overhead).
However, instead of going through the table at constant steps, we cycle
through the values of GF(2^n). This avoids modulo computations, being
much cheaper on RISC machines, without leading to clustering.
The initial probe index is computed as hash mod the table size.
Subsequent probe indices use the values of x^i in GF(2^n)-{0} as an offset,
where x is a root. The initial offset is derived from hash, too.
All arithmetic on hash should ignore overflow.
(This version is due to Reimer Behrends, some ideas are also due to
Jyrki Alakuijala and Vladimir Marangozov.)
This function must never return NULL; failures are indicated by returning
a dictentry* for which the me_value field is NULL. Exceptions are never
reported by this function, and outstanding exceptions are maintained.
*/
static dictentry *
lookdict(dictobject *mp, PyObject *key, register long hash)
{
register int i;
register unsigned incr;
register dictentry *freeslot;
register unsigned int mask = mp->ma_size-1;
dictentry *ep0 = mp->ma_table;
register dictentry *ep;
register int restore_error = 0;
register int checked_error = 0;
register int cmp;
PyObject *err_type, *err_value, *err_tb;
/* We must come up with (i, incr) such that 0 <= i < ma_size
and 0 < incr < ma_size and both are a function of hash.
i is the initial table index and incr the initial probe offset. */
Get rid of the superstitious "~" in dict hashing's "i = (~hash) & mask". The comment following used to say: /* We use ~hash instead of hash, as degenerate hash functions, such as for ints <sigh>, can have lots of leading zeros. It's not really a performance risk, but better safe than sorry. 12-Dec-00 tim: so ~hash produces lots of leading ones instead -- what's the gain? */ That is, there was never a good reason for doing it. And to the contrary, as explained on Python-Dev last December, it tended to make the *sum* (i + incr) & mask (which is the first table index examined in case of collison) the same "too often" across distinct hashes. Changing to the simpler "i = hash & mask" reduced the number of string-dict collisions (== # number of times we go around the lookup for-loop) from about 6 million to 5 million during a full run of the test suite (these are approximate because the test suite does some random stuff from run to run). The number of collisions in non-string dicts also decreased, but not as dramatically. Note that this may, for a given dict, change the order (wrt previous releases) of entries exposed by .keys(), .values() and .items(). A number of std tests suffered bogus failures as a result. For dicts keyed by small ints, or (less so) by characters, the order is much more likely to be in increasing order of key now; e.g., >>> d = {} >>> for i in range(10): ... d[i] = i ... >>> d {0: 0, 1: 1, 2: 2, 3: 3, 4: 4, 5: 5, 6: 6, 7: 7, 8: 8, 9: 9} >>> Unfortunately. people may latch on to that in small examples and draw a bogus conclusion. test_support.py Moved test_extcall's sortdict() into test_support, made it stronger, and imported sortdict into other std tests that needed it. test_unicode.py Excluced cp875 from the "roundtrip over range(128)" test, because cp875 doesn't have a well-defined inverse for unicode("?", "cp875"). See Python-Dev for excruciating details. Cookie.py Chaged various output functions to sort dicts before building strings from them. test_extcall Fiddled the expected-result file. This remains sensitive to native dict ordering, because, e.g., if there are multiple errors in a keyword-arg dict (and test_extcall sets up many cases like that), the specific error Python complains about first depends on native dict ordering.
2001-05-12 21:19:31 -03:00
i = hash & mask;
ep = &ep0[i];
if (ep->me_key == NULL || ep->me_key == key)
return ep;
if (ep->me_key == dummy)
freeslot = ep;
else {
if (ep->me_hash == hash) {
/* error can't have been checked yet */
checked_error = 1;
if (PyErr_Occurred()) {
restore_error = 1;
PyErr_Fetch(&err_type, &err_value, &err_tb);
}
cmp = PyObject_RichCompareBool(ep->me_key, key, Py_EQ);
if (cmp > 0) {
if (restore_error)
PyErr_Restore(err_type, err_value,
err_tb);
return ep;
}
else if (cmp < 0)
PyErr_Clear();
}
freeslot = NULL;
1997-01-18 03:55:05 -04:00
}
/* Derive incr from hash, just to make it more arbitrary. Note that
incr must not be 0, or we will get into an infinite loop.*/
incr = (hash ^ ((unsigned long)hash >> 3)) & mask;
if (!incr)
incr = mask;
/* In the loop, me_key == dummy is by far (factor of 100s) the
least likely outcome, so test for that last. */
for (;;) {
ep = &ep0[(i+incr)&mask];
if (ep->me_key == NULL) {
if (restore_error)
PyErr_Restore(err_type, err_value, err_tb);
return freeslot == NULL ? ep : freeslot;
}
if (ep->me_key == key) {
if (restore_error)
PyErr_Restore(err_type, err_value, err_tb);
return ep;
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
}
else if (ep->me_hash == hash && ep->me_key != dummy) {
if (!checked_error) {
checked_error = 1;
if (PyErr_Occurred()) {
restore_error = 1;
PyErr_Fetch(&err_type, &err_value,
&err_tb);
}
}
cmp = PyObject_RichCompareBool(ep->me_key, key, Py_EQ);
if (cmp > 0) {
if (restore_error)
PyErr_Restore(err_type, err_value,
err_tb);
return ep;
}
else if (cmp < 0)
PyErr_Clear();
}
else if (ep->me_key == dummy && freeslot == NULL)
freeslot = ep;
/* Cycle through GF(2^n)-{0} */
incr <<= 1;
if (incr > mask)
incr ^= mp->ma_poly; /* clears the highest bit */
}
}
/*
* Hacked up version of lookdict which can assume keys are always strings;
* this assumption allows testing for errors during PyObject_Compare() to
* be dropped; string-string comparisons never raise exceptions. This also
* means we don't need to go through PyObject_Compare(); we can always use
* the tp_compare slot of the string type object directly.
*
* This really only becomes meaningful if proper error handling in lookdict()
* is too expensive.
*/
static dictentry *
lookdict_string(dictobject *mp, PyObject *key, register long hash)
{
register int i;
register unsigned incr;
register dictentry *freeslot;
register unsigned int mask = mp->ma_size-1;
dictentry *ep0 = mp->ma_table;
register dictentry *ep;
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
cmpfunc compare = PyString_Type.tp_compare;
/* make sure this function doesn't have to handle non-string keys */
if (!PyString_Check(key)) {
#ifdef SHOW_CONVERSION_COUNTS
++converted;
#endif
mp->ma_lookup = lookdict;
return lookdict(mp, key, hash);
}
/* We must come up with (i, incr) such that 0 <= i < ma_size
and 0 < incr < ma_size and both are a function of hash */
Get rid of the superstitious "~" in dict hashing's "i = (~hash) & mask". The comment following used to say: /* We use ~hash instead of hash, as degenerate hash functions, such as for ints <sigh>, can have lots of leading zeros. It's not really a performance risk, but better safe than sorry. 12-Dec-00 tim: so ~hash produces lots of leading ones instead -- what's the gain? */ That is, there was never a good reason for doing it. And to the contrary, as explained on Python-Dev last December, it tended to make the *sum* (i + incr) & mask (which is the first table index examined in case of collison) the same "too often" across distinct hashes. Changing to the simpler "i = hash & mask" reduced the number of string-dict collisions (== # number of times we go around the lookup for-loop) from about 6 million to 5 million during a full run of the test suite (these are approximate because the test suite does some random stuff from run to run). The number of collisions in non-string dicts also decreased, but not as dramatically. Note that this may, for a given dict, change the order (wrt previous releases) of entries exposed by .keys(), .values() and .items(). A number of std tests suffered bogus failures as a result. For dicts keyed by small ints, or (less so) by characters, the order is much more likely to be in increasing order of key now; e.g., >>> d = {} >>> for i in range(10): ... d[i] = i ... >>> d {0: 0, 1: 1, 2: 2, 3: 3, 4: 4, 5: 5, 6: 6, 7: 7, 8: 8, 9: 9} >>> Unfortunately. people may latch on to that in small examples and draw a bogus conclusion. test_support.py Moved test_extcall's sortdict() into test_support, made it stronger, and imported sortdict into other std tests that needed it. test_unicode.py Excluced cp875 from the "roundtrip over range(128)" test, because cp875 doesn't have a well-defined inverse for unicode("?", "cp875"). See Python-Dev for excruciating details. Cookie.py Chaged various output functions to sort dicts before building strings from them. test_extcall Fiddled the expected-result file. This remains sensitive to native dict ordering, because, e.g., if there are multiple errors in a keyword-arg dict (and test_extcall sets up many cases like that), the specific error Python complains about first depends on native dict ordering.
2001-05-12 21:19:31 -03:00
i = hash & mask;
ep = &ep0[i];
if (ep->me_key == NULL || ep->me_key == key)
return ep;
if (ep->me_key == dummy)
freeslot = ep;
else {
if (ep->me_hash == hash
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
&& compare(ep->me_key, key) == 0) {
return ep;
}
freeslot = NULL;
}
/* Derive incr from hash, just to make it more arbitrary. Note that
incr must not be 0, or we will get into an infinite loop.*/
incr = (hash ^ ((unsigned long)hash >> 3)) & mask;
if (!incr)
incr = mask;
/* In the loop, me_key == dummy is by far (factor of 100s) the
least likely outcome, so test for that last. */
for (;;) {
ep = &ep0[(i+incr)&mask];
if (ep->me_key == NULL)
return freeslot == NULL ? ep : freeslot;
if (ep->me_key == key
|| (ep->me_hash == hash
&& ep->me_key != dummy
&& compare(ep->me_key, key) == 0))
return ep;
else if (ep->me_key == dummy && freeslot == NULL)
freeslot = ep;
/* Cycle through GF(2^n)-{0} */
incr <<= 1;
if (incr > mask)
incr ^= mp->ma_poly; /* clears the highest bit */
}
}
/*
Internal routine to insert a new item into the table.
Used both by the internal resize routine and by the public insert routine.
Eats a reference to key and one to value.
*/
static void
insertdict(register dictobject *mp, PyObject *key, long hash, PyObject *value)
{
1997-05-02 00:12:38 -03:00
PyObject *old_value;
register dictentry *ep;
ep = (mp->ma_lookup)(mp, key, hash);
if (ep->me_value != NULL) {
old_value = ep->me_value;
ep->me_value = value;
1997-05-02 00:12:38 -03:00
Py_DECREF(old_value); /* which **CAN** re-enter */
Py_DECREF(key);
}
else {
if (ep->me_key == NULL)
mp->ma_fill++;
else
1997-05-02 00:12:38 -03:00
Py_DECREF(ep->me_key);
ep->me_key = key;
ep->me_hash = hash;
ep->me_value = value;
mp->ma_used++;
}
}
/*
Restructure the table by allocating a new table and reinserting all
items again. When entries have been deleted, the new table may
actually be smaller than the old one.
*/
static int
dictresize(dictobject *mp, int minused)
{
register int oldsize = mp->ma_size;
register int newsize, newpoly;
register dictentry *oldtable = mp->ma_table;
register dictentry *newtable;
register dictentry *ep;
register int i;
for (i = 0, newsize = MINSIZE; ; i++, newsize <<= 1) {
if (i > sizeof(polys)/sizeof(polys[0])) {
/* Ran out of polynomials */
1997-05-02 00:12:38 -03:00
PyErr_NoMemory();
1994-08-30 05:27:36 -03:00
return -1;
}
1997-05-28 16:15:28 -03:00
if (newsize > minused) {
newpoly = polys[i];
break;
}
}
newtable = PyMem_NEW(dictentry, newsize);
if (newtable == NULL) {
1997-05-02 00:12:38 -03:00
PyErr_NoMemory();
return -1;
}
memset(newtable, '\0', sizeof(dictentry) * newsize);
mp->ma_size = newsize;
mp->ma_poly = newpoly;
mp->ma_table = newtable;
mp->ma_fill = 0;
mp->ma_used = 0;
/* Copy the data over; this is refcount-neutral for active entries;
dummy entries aren't copied over, of course */
for (i = 0, ep = oldtable; i < oldsize; i++, ep++) {
if (ep->me_value != NULL) /* active entry */
insertdict(mp, ep->me_key, ep->me_hash, ep->me_value);
else if (ep->me_key != NULL) { /* dummy entry */
assert(ep->me_key == dummy);
Py_DECREF(ep->me_key);
}
/* else key == value == NULL: nothing to do */
}
if (oldtable != NULL)
PyMem_DEL(oldtable);
return 0;
}
1997-05-02 00:12:38 -03:00
PyObject *
PyDict_GetItem(PyObject *op, PyObject *key)
{
long hash;
dictobject *mp = (dictobject *)op;
1997-05-02 00:12:38 -03:00
if (!PyDict_Check(op)) {
return NULL;
}
if (mp->ma_table == NULL)
return NULL;
#ifdef CACHE_HASH
1997-05-02 00:12:38 -03:00
if (!PyString_Check(key) ||
(hash = ((PyStringObject *) key)->ob_shash) == -1)
#endif
{
1997-05-02 00:12:38 -03:00
hash = PyObject_Hash(key);
if (hash == -1) {
PyErr_Clear();
return NULL;
}
}
return (mp->ma_lookup)(mp, key, hash)->me_value;
}
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
/* CAUTION: PyDict_SetItem() must guarantee that it won't resize the
* dictionary if it is merely replacing the value for an existing key.
* This is means that it's safe to loop over a dictionary with
* PyDict_Next() and occasionally replace a value -- but you can't
* insert new keys or remove them.
*/
int
PyDict_SetItem(register PyObject *op, PyObject *key, PyObject *value)
{
register dictobject *mp;
register long hash;
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
register int n_used;
1997-05-02 00:12:38 -03:00
if (!PyDict_Check(op)) {
PyErr_BadInternalCall();
return -1;
}
mp = (dictobject *)op;
#ifdef CACHE_HASH
1997-05-02 00:12:38 -03:00
if (PyString_Check(key)) {
1997-01-18 03:55:05 -04:00
#ifdef INTERN_STRINGS
1997-05-02 00:12:38 -03:00
if (((PyStringObject *)key)->ob_sinterned != NULL) {
key = ((PyStringObject *)key)->ob_sinterned;
hash = ((PyStringObject *)key)->ob_shash;
1997-01-18 03:55:05 -04:00
}
else
#endif
1997-01-18 03:55:05 -04:00
{
1997-05-02 00:12:38 -03:00
hash = ((PyStringObject *)key)->ob_shash;
1997-01-18 03:55:05 -04:00
if (hash == -1)
1997-05-02 00:12:38 -03:00
hash = PyObject_Hash(key);
1997-01-18 03:55:05 -04:00
}
}
else
#endif
{
1997-05-02 00:12:38 -03:00
hash = PyObject_Hash(key);
1997-01-18 03:55:05 -04:00
if (hash == -1)
return -1;
}
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
if (mp->ma_fill >= mp->ma_size) {
/* No room for a new key.
* This only happens when the dict is empty.
* Let dictresize() create a minimal dict.
*/
assert(mp->ma_used == 0);
if (dictresize(mp, 0) != 0)
return -1;
assert(mp->ma_fill < mp->ma_size);
}
n_used = mp->ma_used;
Py_INCREF(value);
Py_INCREF(key);
insertdict(mp, key, hash, value);
/* If we added a key, we can safely resize. Otherwise skip this!
* If fill >= 2/3 size, adjust size. Normally, this doubles the
* size, but it's also possible for the dict to shrink (if ma_fill is
* much larger than ma_used, meaning a lot of dict keys have been
* deleted).
*/
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
if (mp->ma_used > n_used && mp->ma_fill*3 >= mp->ma_size*2) {
if (dictresize(mp, mp->ma_used*2) != 0)
return -1;
}
return 0;
}
int
PyDict_DelItem(PyObject *op, PyObject *key)
{
register dictobject *mp;
register long hash;
register dictentry *ep;
1997-05-02 00:12:38 -03:00
PyObject *old_value, *old_key;
1997-05-02 00:12:38 -03:00
if (!PyDict_Check(op)) {
PyErr_BadInternalCall();
return -1;
}
#ifdef CACHE_HASH
1997-05-02 00:12:38 -03:00
if (!PyString_Check(key) ||
(hash = ((PyStringObject *) key)->ob_shash) == -1)
#endif
{
1997-05-02 00:12:38 -03:00
hash = PyObject_Hash(key);
if (hash == -1)
return -1;
}
mp = (dictobject *)op;
if (((dictobject *)op)->ma_table == NULL)
goto empty;
ep = (mp->ma_lookup)(mp, key, hash);
if (ep->me_value == NULL) {
empty:
1997-05-02 00:12:38 -03:00
PyErr_SetObject(PyExc_KeyError, key);
return -1;
}
old_key = ep->me_key;
1997-05-02 00:12:38 -03:00
Py_INCREF(dummy);
ep->me_key = dummy;
old_value = ep->me_value;
ep->me_value = NULL;
mp->ma_used--;
Py_DECREF(old_value);
Py_DECREF(old_key);
return 0;
}
void
PyDict_Clear(PyObject *op)
{
int i, n;
register dictentry *table;
dictobject *mp;
1997-05-02 00:12:38 -03:00
if (!PyDict_Check(op))
return;
mp = (dictobject *)op;
table = mp->ma_table;
if (table == NULL)
return;
n = mp->ma_size;
mp->ma_size = mp->ma_used = mp->ma_fill = 0;
mp->ma_table = NULL;
for (i = 0; i < n; i++) {
1997-05-02 00:12:38 -03:00
Py_XDECREF(table[i].me_key);
Py_XDECREF(table[i].me_value);
}
1997-05-02 00:12:38 -03:00
PyMem_DEL(table);
}
/* CAUTION: In general, it isn't safe to use PyDict_Next in a loop that
* mutates the dict. One exception: it is safe if the loop merely changes
* the values associated with the keys (but doesn't insert new keys or
* delete keys), via PyDict_SetItem().
*/
int
PyDict_Next(PyObject *op, int *ppos, PyObject **pkey, PyObject **pvalue)
{
int i;
register dictobject *mp;
1997-05-02 00:12:38 -03:00
if (!PyDict_Check(op))
return 0;
mp = (dictobject *)op;
i = *ppos;
if (i < 0)
return 0;
while (i < mp->ma_size && mp->ma_table[i].me_value == NULL)
i++;
*ppos = i+1;
if (i >= mp->ma_size)
return 0;
if (pkey)
*pkey = mp->ma_table[i].me_key;
if (pvalue)
*pvalue = mp->ma_table[i].me_value;
return 1;
}
/* Methods */
static void
dict_dealloc(register dictobject *mp)
{
register int i;
register dictentry *ep;
Py_TRASHCAN_SAFE_BEGIN(mp)
PyObject_GC_Fini(mp);
for (i = 0, ep = mp->ma_table; i < mp->ma_size; i++, ep++) {
if (ep->me_key != NULL) {
1997-05-02 00:12:38 -03:00
Py_DECREF(ep->me_key);
}
if (ep->me_value != NULL) {
1997-05-02 00:12:38 -03:00
Py_DECREF(ep->me_value);
}
}
if (mp->ma_table != NULL)
PyMem_DEL(mp->ma_table);
2000-06-30 22:00:38 -03:00
mp = (dictobject *) PyObject_AS_GC(mp);
PyObject_DEL(mp);
Py_TRASHCAN_SAFE_END(mp)
}
static int
dict_print(register dictobject *mp, register FILE *fp, register int flags)
{
register int i;
register int any;
register dictentry *ep;
i = Py_ReprEnter((PyObject*)mp);
if (i != 0) {
if (i < 0)
return i;
fprintf(fp, "{...}");
return 0;
}
fprintf(fp, "{");
any = 0;
for (i = 0, ep = mp->ma_table; i < mp->ma_size; i++, ep++) {
if (ep->me_value != NULL) {
if (any++ > 0)
fprintf(fp, ", ");
if (PyObject_Print((PyObject *)ep->me_key, fp, 0)!=0) {
Py_ReprLeave((PyObject*)mp);
return -1;
}
fprintf(fp, ": ");
if (PyObject_Print(ep->me_value, fp, 0) != 0) {
Py_ReprLeave((PyObject*)mp);
return -1;
}
}
}
fprintf(fp, "}");
Py_ReprLeave((PyObject*)mp);
return 0;
}
1997-05-02 00:12:38 -03:00
static PyObject *
dict_repr(dictobject *mp)
{
1997-05-02 00:12:38 -03:00
auto PyObject *v;
PyObject *sepa, *colon;
register int i;
register int any;
register dictentry *ep;
i = Py_ReprEnter((PyObject*)mp);
if (i != 0) {
if (i > 0)
return PyString_FromString("{...}");
return NULL;
}
1997-05-02 00:12:38 -03:00
v = PyString_FromString("{");
sepa = PyString_FromString(", ");
colon = PyString_FromString(": ");
any = 0;
1994-08-30 05:27:36 -03:00
for (i = 0, ep = mp->ma_table; i < mp->ma_size && v; i++, ep++) {
if (ep->me_value != NULL) {
if (any++)
1997-05-02 00:12:38 -03:00
PyString_Concat(&v, sepa);
PyString_ConcatAndDel(&v, PyObject_Repr(ep->me_key));
PyString_Concat(&v, colon);
PyString_ConcatAndDel(&v, PyObject_Repr(ep->me_value));
}
}
1997-05-02 00:12:38 -03:00
PyString_ConcatAndDel(&v, PyString_FromString("}"));
Py_ReprLeave((PyObject*)mp);
1997-05-02 00:12:38 -03:00
Py_XDECREF(sepa);
Py_XDECREF(colon);
return v;
}
static int
dict_length(dictobject *mp)
{
return mp->ma_used;
}
1997-05-02 00:12:38 -03:00
static PyObject *
dict_subscript(dictobject *mp, register PyObject *key)
{
1997-05-02 00:12:38 -03:00
PyObject *v;
long hash;
if (mp->ma_table == NULL) {
1997-05-02 00:12:38 -03:00
PyErr_SetObject(PyExc_KeyError, key);
return NULL;
}
#ifdef CACHE_HASH
1997-05-02 00:12:38 -03:00
if (!PyString_Check(key) ||
(hash = ((PyStringObject *) key)->ob_shash) == -1)
#endif
{
1997-05-02 00:12:38 -03:00
hash = PyObject_Hash(key);
if (hash == -1)
return NULL;
}
v = (mp->ma_lookup)(mp, key, hash) -> me_value;
if (v == NULL)
1997-05-02 00:12:38 -03:00
PyErr_SetObject(PyExc_KeyError, key);
else
1997-05-02 00:12:38 -03:00
Py_INCREF(v);
return v;
}
static int
dict_ass_sub(dictobject *mp, PyObject *v, PyObject *w)
{
if (w == NULL)
1997-05-02 00:12:38 -03:00
return PyDict_DelItem((PyObject *)mp, v);
else
1997-05-02 00:12:38 -03:00
return PyDict_SetItem((PyObject *)mp, v, w);
}
static PyMappingMethods dict_as_mapping = {
(inquiry)dict_length, /*mp_length*/
(binaryfunc)dict_subscript, /*mp_subscript*/
(objobjargproc)dict_ass_sub, /*mp_ass_subscript*/
};
1997-05-02 00:12:38 -03:00
static PyObject *
dict_keys(register dictobject *mp, PyObject *args)
{
1997-05-02 00:12:38 -03:00
register PyObject *v;
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
register int i, j, n;
1997-05-02 00:12:38 -03:00
if (!PyArg_NoArgs(args))
return NULL;
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
again:
n = mp->ma_used;
v = PyList_New(n);
if (v == NULL)
return NULL;
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
if (n != mp->ma_used) {
/* Durnit. The allocations caused the dict to resize.
* Just start over, this shouldn't normally happen.
*/
Py_DECREF(v);
goto again;
}
for (i = 0, j = 0; i < mp->ma_size; i++) {
if (mp->ma_table[i].me_value != NULL) {
1997-05-02 00:12:38 -03:00
PyObject *key = mp->ma_table[i].me_key;
Py_INCREF(key);
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
PyList_SET_ITEM(v, j, key);
j++;
}
}
return v;
}
1997-05-02 00:12:38 -03:00
static PyObject *
dict_values(register dictobject *mp, PyObject *args)
{
1997-05-02 00:12:38 -03:00
register PyObject *v;
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
register int i, j, n;
1997-05-02 00:12:38 -03:00
if (!PyArg_NoArgs(args))
return NULL;
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
again:
n = mp->ma_used;
v = PyList_New(n);
if (v == NULL)
return NULL;
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
if (n != mp->ma_used) {
/* Durnit. The allocations caused the dict to resize.
* Just start over, this shouldn't normally happen.
*/
Py_DECREF(v);
goto again;
}
for (i = 0, j = 0; i < mp->ma_size; i++) {
if (mp->ma_table[i].me_value != NULL) {
1997-05-02 00:12:38 -03:00
PyObject *value = mp->ma_table[i].me_value;
Py_INCREF(value);
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
PyList_SET_ITEM(v, j, value);
j++;
}
}
return v;
}
1997-05-02 00:12:38 -03:00
static PyObject *
dict_items(register dictobject *mp, PyObject *args)
{
1997-05-02 00:12:38 -03:00
register PyObject *v;
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
register int i, j, n;
PyObject *item, *key, *value;
1997-05-02 00:12:38 -03:00
if (!PyArg_NoArgs(args))
return NULL;
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
/* Preallocate the list of tuples, to avoid allocations during
* the loop over the items, which could trigger GC, which
* could resize the dict. :-(
*/
again:
n = mp->ma_used;
v = PyList_New(n);
if (v == NULL)
return NULL;
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
for (i = 0; i < n; i++) {
item = PyTuple_New(2);
if (item == NULL) {
Py_DECREF(v);
return NULL;
}
PyList_SET_ITEM(v, i, item);
}
if (n != mp->ma_used) {
/* Durnit. The allocations caused the dict to resize.
* Just start over, this shouldn't normally happen.
*/
Py_DECREF(v);
goto again;
}
/* Nothing we do below makes any function calls. */
for (i = 0, j = 0; i < mp->ma_size; i++) {
if (mp->ma_table[i].me_value != NULL) {
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
key = mp->ma_table[i].me_key;
value = mp->ma_table[i].me_value;
item = PyList_GET_ITEM(v, j);
1997-05-02 00:12:38 -03:00
Py_INCREF(key);
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
PyTuple_SET_ITEM(item, 0, key);
1997-05-02 00:12:38 -03:00
Py_INCREF(value);
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
PyTuple_SET_ITEM(item, 1, value);
j++;
}
}
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
assert(j == n);
return v;
}
1997-05-28 16:15:28 -03:00
static PyObject *
dict_update(register dictobject *mp, PyObject *args)
1997-05-28 16:15:28 -03:00
{
register int i;
dictobject *other;
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
dictentry *entry;
1997-05-28 16:15:28 -03:00
if (!PyArg_Parse(args, "O!", &PyDict_Type, &other))
return NULL;
if (other == mp || other->ma_used == 0)
goto done; /* a.update(a) or a.update({}); nothing to do */
1997-05-28 16:15:28 -03:00
/* Do one big resize at the start, rather than incrementally
resizing as we insert new items. Expect that there will be
no (or few) overlapping keys. */
if ((mp->ma_fill + other->ma_used)*3 >= mp->ma_size*2) {
if (dictresize(mp, (mp->ma_used + other->ma_used)*3/2) != 0)
return NULL;
}
for (i = 0; i < other->ma_size; i++) {
entry = &other->ma_table[i];
if (entry->me_value != NULL) {
Py_INCREF(entry->me_key);
Py_INCREF(entry->me_value);
insertdict(mp, entry->me_key, entry->me_hash,
entry->me_value);
}
}
done:
Py_INCREF(Py_None);
return Py_None;
}
static PyObject *
dict_copy(register dictobject *mp, PyObject *args)
1997-05-28 16:15:28 -03:00
{
if (!PyArg_Parse(args, ""))
return NULL;
return PyDict_Copy((PyObject*)mp);
}
PyObject *
PyDict_Copy(PyObject *o)
{
register dictobject *mp;
1997-05-28 16:15:28 -03:00
register int i;
dictobject *copy;
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
dictentry *entry;
if (o == NULL || !PyDict_Check(o)) {
PyErr_BadInternalCall();
1997-05-28 16:15:28 -03:00
return NULL;
}
mp = (dictobject *)o;
1997-05-28 16:15:28 -03:00
copy = (dictobject *)PyDict_New();
if (copy == NULL)
return NULL;
if (mp->ma_used > 0) {
if (dictresize(copy, mp->ma_used*3/2) != 0)
return NULL;
for (i = 0; i < mp->ma_size; i++) {
entry = &mp->ma_table[i];
if (entry->me_value != NULL) {
Py_INCREF(entry->me_key);
Py_INCREF(entry->me_value);
insertdict(copy, entry->me_key, entry->me_hash,
entry->me_value);
}
}
}
return (PyObject *)copy;
}
int
PyDict_Size(PyObject *mp)
{
1997-05-02 00:12:38 -03:00
if (mp == NULL || !PyDict_Check(mp)) {
PyErr_BadInternalCall();
return 0;
}
return ((dictobject *)mp)->ma_used;
}
1997-05-02 00:12:38 -03:00
PyObject *
PyDict_Keys(PyObject *mp)
{
1997-05-02 00:12:38 -03:00
if (mp == NULL || !PyDict_Check(mp)) {
PyErr_BadInternalCall();
return NULL;
}
return dict_keys((dictobject *)mp, (PyObject *)NULL);
}
1997-05-02 00:12:38 -03:00
PyObject *
PyDict_Values(PyObject *mp)
{
1997-05-02 00:12:38 -03:00
if (mp == NULL || !PyDict_Check(mp)) {
PyErr_BadInternalCall();
return NULL;
}
return dict_values((dictobject *)mp, (PyObject *)NULL);
}
1997-05-02 00:12:38 -03:00
PyObject *
PyDict_Items(PyObject *mp)
{
1997-05-02 00:12:38 -03:00
if (mp == NULL || !PyDict_Check(mp)) {
PyErr_BadInternalCall();
return NULL;
}
return dict_items((dictobject *)mp, (PyObject *)NULL);
}
/* Subroutine which returns the smallest key in a for which b's value
is different or absent. The value is returned too, through the
pval argument. Both are NULL if no key in a is found for which b's status
differs. The refcounts on (and only on) non-NULL *pval and function return
values must be decremented by the caller (characterize() increments them
to ensure that mutating comparison and PyDict_GetItem calls can't delete
them before the caller is done looking at them). */
1997-05-02 00:12:38 -03:00
static PyObject *
characterize(dictobject *a, dictobject *b, PyObject **pval)
{
PyObject *akey = NULL; /* smallest key in a s.t. a[akey] != b[akey] */
PyObject *aval = NULL; /* a[akey] */
int i, cmp;
for (i = 0; i < a->ma_size; i++) {
PyObject *thiskey, *thisaval, *thisbval;
if (a->ma_table[i].me_value == NULL)
continue;
thiskey = a->ma_table[i].me_key;
Py_INCREF(thiskey); /* keep alive across compares */
if (akey != NULL) {
cmp = PyObject_RichCompareBool(akey, thiskey, Py_LT);
if (cmp < 0) {
Py_DECREF(thiskey);
goto Fail;
}
if (cmp > 0 ||
i >= a->ma_size ||
a->ma_table[i].me_value == NULL)
1997-05-02 00:12:38 -03:00
{
/* Not the *smallest* a key; or maybe it is
* but the compare shrunk the dict so we can't
* find its associated value anymore; or
* maybe it is but the compare deleted the
* a[thiskey] entry.
*/
Py_DECREF(thiskey);
continue;
}
}
/* Compare a[thiskey] to b[thiskey]; cmp <- true iff equal. */
thisaval = a->ma_table[i].me_value;
assert(thisaval);
Py_INCREF(thisaval); /* keep alive */
thisbval = PyDict_GetItem((PyObject *)b, thiskey);
if (thisbval == NULL)
cmp = 0;
else {
/* both dicts have thiskey: same values? */
cmp = PyObject_RichCompareBool(
thisaval, thisbval, Py_EQ);
if (cmp < 0) {
Py_DECREF(thiskey);
Py_DECREF(thisaval);
goto Fail;
}
}
if (cmp == 0) {
/* New winner. */
Py_XDECREF(akey);
Py_XDECREF(aval);
akey = thiskey;
aval = thisaval;
}
else {
Py_DECREF(thiskey);
Py_DECREF(thisaval);
}
}
*pval = aval;
return akey;
Fail:
Py_XDECREF(akey);
Py_XDECREF(aval);
*pval = NULL;
return NULL;
}
static int
dict_compare(dictobject *a, dictobject *b)
{
1997-05-02 00:12:38 -03:00
PyObject *adiff, *bdiff, *aval, *bval;
int res;
/* Compare lengths first */
if (a->ma_used < b->ma_used)
return -1; /* a is shorter */
else if (a->ma_used > b->ma_used)
return 1; /* b is shorter */
/* Same length -- check all keys */
bdiff = bval = NULL;
adiff = characterize(a, b, &aval);
if (adiff == NULL) {
assert(!aval);
2001-05-10 15:58:31 -03:00
/* Either an error, or a is a subset with the same length so
* must be equal.
*/
res = PyErr_Occurred() ? -1 : 0;
goto Finished;
}
bdiff = characterize(b, a, &bval);
if (bdiff == NULL && PyErr_Occurred()) {
assert(!bval);
res = -1;
goto Finished;
}
res = 0;
if (bdiff) {
/* bdiff == NULL "should be" impossible now, but perhaps
* the last comparison done by the characterize() on a had
* the side effect of making the dicts equal!
*/
res = PyObject_Compare(adiff, bdiff);
}
if (res == 0 && bval != NULL)
1997-05-02 00:12:38 -03:00
res = PyObject_Compare(aval, bval);
Finished:
Py_XDECREF(adiff);
Py_XDECREF(bdiff);
Py_XDECREF(aval);
Py_XDECREF(bval);
return res;
}
/* Return 1 if dicts equal, 0 if not, -1 if error.
* Gets out as soon as any difference is detected.
* Uses only Py_EQ comparison.
*/
static int
dict_equal(dictobject *a, dictobject *b)
{
int i;
if (a->ma_used != b->ma_used)
/* can't be equal if # of entries differ */
return 0;
/* Same # of entries -- check all of 'em. Exit early on any diff. */
for (i = 0; i < a->ma_size; i++) {
PyObject *aval = a->ma_table[i].me_value;
if (aval != NULL) {
int cmp;
PyObject *bval;
PyObject *key = a->ma_table[i].me_key;
/* temporarily bump aval's refcount to ensure it stays
alive until we're done with it */
Py_INCREF(aval);
bval = PyDict_GetItem((PyObject *)b, key);
if (bval == NULL) {
Py_DECREF(aval);
return 0;
}
cmp = PyObject_RichCompareBool(aval, bval, Py_EQ);
Py_DECREF(aval);
if (cmp <= 0) /* error or not equal */
return cmp;
}
}
return 1;
}
static PyObject *
dict_richcompare(PyObject *v, PyObject *w, int op)
{
int cmp;
PyObject *res;
if (!PyDict_Check(v) || !PyDict_Check(w)) {
res = Py_NotImplemented;
}
else if (op == Py_EQ || op == Py_NE) {
cmp = dict_equal((dictobject *)v, (dictobject *)w);
if (cmp < 0)
return NULL;
res = (cmp == (op == Py_EQ)) ? Py_True : Py_False;
}
else
res = Py_NotImplemented;
Py_INCREF(res);
return res;
}
1997-05-02 00:12:38 -03:00
static PyObject *
dict_has_key(register dictobject *mp, PyObject *args)
{
1997-05-02 00:12:38 -03:00
PyObject *key;
long hash;
register long ok;
if (!PyArg_ParseTuple(args, "O:has_key", &key))
return NULL;
#ifdef CACHE_HASH
1997-05-02 00:12:38 -03:00
if (!PyString_Check(key) ||
(hash = ((PyStringObject *) key)->ob_shash) == -1)
#endif
{
1997-05-02 00:12:38 -03:00
hash = PyObject_Hash(key);
if (hash == -1)
return NULL;
}
ok = (mp->ma_size != 0
&& (mp->ma_lookup)(mp, key, hash)->me_value != NULL);
1997-05-02 00:12:38 -03:00
return PyInt_FromLong(ok);
}
static PyObject *
dict_get(register dictobject *mp, PyObject *args)
{
PyObject *key;
PyObject *failobj = Py_None;
PyObject *val = NULL;
long hash;
if (!PyArg_ParseTuple(args, "O|O:get", &key, &failobj))
return NULL;
if (mp->ma_table == NULL)
goto finally;
#ifdef CACHE_HASH
if (!PyString_Check(key) ||
(hash = ((PyStringObject *) key)->ob_shash) == -1)
#endif
{
hash = PyObject_Hash(key);
if (hash == -1)
return NULL;
}
val = (mp->ma_lookup)(mp, key, hash)->me_value;
finally:
if (val == NULL)
val = failobj;
Py_INCREF(val);
return val;
}
static PyObject *
dict_setdefault(register dictobject *mp, PyObject *args)
{
PyObject *key;
PyObject *failobj = Py_None;
PyObject *val = NULL;
long hash;
if (!PyArg_ParseTuple(args, "O|O:setdefault", &key, &failobj))
return NULL;
if (mp->ma_table == NULL)
goto finally;
#ifdef CACHE_HASH
if (!PyString_Check(key) ||
(hash = ((PyStringObject *) key)->ob_shash) == -1)
#endif
{
hash = PyObject_Hash(key);
if (hash == -1)
return NULL;
}
val = (mp->ma_lookup)(mp, key, hash)->me_value;
finally:
if (val == NULL) {
val = failobj;
if (PyDict_SetItem((PyObject*)mp, key, failobj))
val = NULL;
}
Py_XINCREF(val);
return val;
}
1997-05-02 00:12:38 -03:00
static PyObject *
dict_clear(register dictobject *mp, PyObject *args)
{
1997-05-02 00:12:38 -03:00
if (!PyArg_NoArgs(args))
return NULL;
1997-05-02 00:12:38 -03:00
PyDict_Clear((PyObject *)mp);
Py_INCREF(Py_None);
return Py_None;
}
2000-12-12 18:02:18 -04:00
static PyObject *
dict_popitem(dictobject *mp, PyObject *args)
{
int i = 0;
dictentry *ep;
PyObject *res;
if (!PyArg_NoArgs(args))
return NULL;
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
/* Allocate the result tuple first. Believe it or not,
* this allocation could trigger a garbage collection which
* could resize the dict, which would invalidate the pointer
* (ep) into the dict calculated below.
* So we have to do this first.
*/
res = PyTuple_New(2);
if (res == NULL)
return NULL;
if (mp->ma_used == 0) {
Py_DECREF(res);
PyErr_SetString(PyExc_KeyError,
"popitem(): dictionary is empty");
return NULL;
}
2000-12-12 18:02:18 -04:00
/* Set ep to "the first" dict entry with a value. We abuse the hash
* field of slot 0 to hold a search finger:
* If slot 0 has a value, use slot 0.
* Else slot 0 is being used to hold a search finger,
* and we use its hash value as the first index to look.
*/
ep = &mp->ma_table[0];
if (ep->me_value == NULL) {
i = (int)ep->me_hash;
/* The hash field may be uninitialized trash, or it
* may be a real hash value, or it may be a legit
* search finger, or it may be a once-legit search
* finger that's out of bounds now because it
* wrapped around or the table shrunk -- simply
* make sure it's in bounds now.
*/
if (i >= mp->ma_size || i < 1)
i = 1; /* skip slot 0 */
while ((ep = &mp->ma_table[i])->me_value == NULL) {
i++;
if (i >= mp->ma_size)
i = 1;
}
}
Tentative fix for a problem that Tim discovered at the last moment, and reported to python-dev: because we were calling dict_resize() in PyDict_Next(), and because GC's dict_traverse() uses PyDict_Next(), and because PyTuple_New() can cause GC, and because dict_items() calls PyTuple_New(), it was possible for dict_items() to have the dict resized right under its nose. The solution is convoluted, and touches several places: keys(), values(), items(), popitem(), PyDict_Next(), and PyDict_SetItem(). There are two parts to it. First, we no longer call dict_resize() in PyDict_Next(), which seems to solve the immediate problem. But then PyDict_SetItem() must have a different policy about when *it* calls dict_resize(), because we want to guarantee (e.g. for an algorithm that Jeremy uses in the compiler) that you can loop over a dict using PyDict_Next() and make changes to the dict as long as those changes are only value replacements for existing keys using PyDict_SetItem(). This is done by resizing *after* the insertion instead of before, and by remembering the size before we insert the item, and if the size is still the same, we don't bother to even check if we might need to resize. An additional detail is that if the dict starts out empty, we must still resize it before the insertion. That was the first part. :-) The second part is to make keys(), values(), items(), and popitem() safe against side effects on the dict caused by allocations, under the assumption that if the GC can cause arbitrary Python code to run, it can cause other threads to run, and it's not inconceivable that our dict could be resized -- it would be insane to write code that relies on this, but not all code is sane. Now, I have this nagging feeling that the loops in lookdict probably are blissfully assuming that doing a simple key comparison does not change the dict's size. This is not necessarily true (the keys could be class instances after all). But that's a battle for another day.
2001-04-15 19:16:26 -03:00
PyTuple_SET_ITEM(res, 0, ep->me_key);
PyTuple_SET_ITEM(res, 1, ep->me_value);
Py_INCREF(dummy);
ep->me_key = dummy;
ep->me_value = NULL;
mp->ma_used--;
assert(mp->ma_table[0].me_value == NULL);
mp->ma_table[0].me_hash = i + 1; /* next place to start */
2000-12-12 18:02:18 -04:00
return res;
}
static int
dict_traverse(PyObject *op, visitproc visit, void *arg)
{
int i = 0, err;
PyObject *pk;
PyObject *pv;
while (PyDict_Next(op, &i, &pk, &pv)) {
err = visit(pk, arg);
if (err)
return err;
err = visit(pv, arg);
if (err)
return err;
}
return 0;
}
static int
dict_tp_clear(PyObject *op)
{
PyDict_Clear(op);
return 0;
}
staticforward PyObject *dictiter_new(dictobject *, binaryfunc);
static PyObject *
select_key(PyObject *key, PyObject *value)
{
Py_INCREF(key);
return key;
}
static PyObject *
select_value(PyObject *key, PyObject *value)
{
Py_INCREF(value);
return value;
}
static PyObject *
select_item(PyObject *key, PyObject *value)
{
PyObject *res = PyTuple_New(2);
if (res != NULL) {
Py_INCREF(key);
Py_INCREF(value);
PyTuple_SET_ITEM(res, 0, key);
PyTuple_SET_ITEM(res, 1, value);
}
return res;
}
static PyObject *
dict_iterkeys(dictobject *dict, PyObject *args)
{
if (!PyArg_ParseTuple(args, ""))
return NULL;
return dictiter_new(dict, select_key);
}
static PyObject *
dict_itervalues(dictobject *dict, PyObject *args)
{
if (!PyArg_ParseTuple(args, ""))
return NULL;
return dictiter_new(dict, select_value);
}
static PyObject *
dict_iteritems(dictobject *dict, PyObject *args)
{
if (!PyArg_ParseTuple(args, ""))
return NULL;
return dictiter_new(dict, select_item);
}
static char has_key__doc__[] =
"D.has_key(k) -> 1 if D has a key k, else 0";
static char get__doc__[] =
"D.get(k[,d]) -> D[k] if D.has_key(k), else d. d defaults to None.";
static char setdefault_doc__[] =
"D.setdefault(k[,d]) -> D.get(k,d), also set D[k]=d if not D.has_key(k)";
static char popitem__doc__[] =
"D.popitem() -> (k, v), remove and return some (key, value) pair as a\n\
2-tuple; but raise KeyError if D is empty";
static char keys__doc__[] =
"D.keys() -> list of D's keys";
static char items__doc__[] =
"D.items() -> list of D's (key, value) pairs, as 2-tuples";
static char values__doc__[] =
"D.values() -> list of D's values";
static char update__doc__[] =
"D.update(E) -> None. Update D from E: for k in E.keys(): D[k] = E[k]";
static char clear__doc__[] =
"D.clear() -> None. Remove all items from D.";
static char copy__doc__[] =
"D.copy() -> a shallow copy of D";
static char iterkeys__doc__[] =
"D.iterkeys() -> an iterator over the keys of D";
static char itervalues__doc__[] =
"D.itervalues() -> an iterator over the values of D";
static char iteritems__doc__[] =
"D.iteritems() -> an iterator over the (key, value) items of D";
1997-05-02 00:12:38 -03:00
static PyMethodDef mapp_methods[] = {
{"has_key", (PyCFunction)dict_has_key, METH_VARARGS,
has_key__doc__},
{"get", (PyCFunction)dict_get, METH_VARARGS,
get__doc__},
{"setdefault", (PyCFunction)dict_setdefault, METH_VARARGS,
setdefault_doc__},
{"popitem", (PyCFunction)dict_popitem, METH_OLDARGS,
popitem__doc__},
{"keys", (PyCFunction)dict_keys, METH_OLDARGS,
keys__doc__},
{"items", (PyCFunction)dict_items, METH_OLDARGS,
items__doc__},
{"values", (PyCFunction)dict_values, METH_OLDARGS,
values__doc__},
{"update", (PyCFunction)dict_update, METH_OLDARGS,
update__doc__},
{"clear", (PyCFunction)dict_clear, METH_OLDARGS,
clear__doc__},
{"copy", (PyCFunction)dict_copy, METH_OLDARGS,
copy__doc__},
{"iterkeys", (PyCFunction)dict_iterkeys, METH_VARARGS,
iterkeys__doc__},
{"itervalues", (PyCFunction)dict_itervalues, METH_VARARGS,
itervalues__doc__},
{"iteritems", (PyCFunction)dict_iteritems, METH_VARARGS,
iteritems__doc__},
{NULL, NULL} /* sentinel */
};
1997-05-02 00:12:38 -03:00
static PyObject *
dict_getattr(dictobject *mp, char *name)
{
1997-05-02 00:12:38 -03:00
return Py_FindMethod(mapp_methods, (PyObject *)mp, name);
}
static int
dict_contains(dictobject *mp, PyObject *key)
{
long hash;
#ifdef CACHE_HASH
if (!PyString_Check(key) ||
(hash = ((PyStringObject *) key)->ob_shash) == -1)
#endif
{
hash = PyObject_Hash(key);
if (hash == -1)
return -1;
}
return (mp->ma_size != 0
&& (mp->ma_lookup)(mp, key, hash)->me_value != NULL);
}
/* Hack to implement "key in dict" */
static PySequenceMethods dict_as_sequence = {
0, /* sq_length */
0, /* sq_concat */
0, /* sq_repeat */
0, /* sq_item */
0, /* sq_slice */
0, /* sq_ass_item */
0, /* sq_ass_slice */
(objobjproc)dict_contains, /* sq_contains */
0, /* sq_inplace_concat */
0, /* sq_inplace_repeat */
};
static PyObject *
dict_iter(dictobject *dict)
{
return dictiter_new(dict, select_key);
}
1997-05-02 00:12:38 -03:00
PyTypeObject PyDict_Type = {
PyObject_HEAD_INIT(&PyType_Type)
0,
"dictionary",
sizeof(dictobject) + PyGC_HEAD_SIZE,
0,
(destructor)dict_dealloc, /* tp_dealloc */
(printfunc)dict_print, /* tp_print */
(getattrfunc)dict_getattr, /* tp_getattr */
0, /* tp_setattr */
(cmpfunc)dict_compare, /* tp_compare */
(reprfunc)dict_repr, /* tp_repr */
0, /* tp_as_number */
&dict_as_sequence, /* tp_as_sequence */
&dict_as_mapping, /* tp_as_mapping */
0, /* tp_hash */
0, /* tp_call */
0, /* tp_str */
0, /* tp_getattro */
0, /* tp_setattro */
0, /* tp_as_buffer */
Py_TPFLAGS_DEFAULT | Py_TPFLAGS_GC, /* tp_flags */
0, /* tp_doc */
(traverseproc)dict_traverse, /* tp_traverse */
(inquiry)dict_tp_clear, /* tp_clear */
dict_richcompare, /* tp_richcompare */
0, /* tp_weaklistoffset */
(getiterfunc)dict_iter, /* tp_iter */
0, /* tp_iternext */
};
/* For backward compatibility with old dictionary interface */
1997-05-02 00:12:38 -03:00
PyObject *
PyDict_GetItemString(PyObject *v, char *key)
{
PyObject *kv, *rv;
kv = PyString_FromString(key);
if (kv == NULL)
return NULL;
rv = PyDict_GetItem(v, kv);
Py_DECREF(kv);
return rv;
}
int
PyDict_SetItemString(PyObject *v, char *key, PyObject *item)
{
PyObject *kv;
int err;
kv = PyString_FromString(key);
if (kv == NULL)
return -1;
PyString_InternInPlace(&kv); /* XXX Should we really? */
err = PyDict_SetItem(v, kv, item);
Py_DECREF(kv);
return err;
}
int
PyDict_DelItemString(PyObject *v, char *key)
{
PyObject *kv;
int err;
kv = PyString_FromString(key);
if (kv == NULL)
return -1;
err = PyDict_DelItem(v, kv);
Py_DECREF(kv);
return err;
}
/* Dictionary iterator type */
extern PyTypeObject PyDictIter_Type; /* Forward */
typedef struct {
PyObject_HEAD
dictobject *di_dict;
int di_used;
int di_pos;
binaryfunc di_select;
} dictiterobject;
static PyObject *
dictiter_new(dictobject *dict, binaryfunc select)
{
dictiterobject *di;
di = PyObject_NEW(dictiterobject, &PyDictIter_Type);
if (di == NULL)
return NULL;
Py_INCREF(dict);
di->di_dict = dict;
di->di_used = dict->ma_used;
di->di_pos = 0;
di->di_select = select;
return (PyObject *)di;
}
static void
dictiter_dealloc(dictiterobject *di)
{
Py_DECREF(di->di_dict);
PyObject_DEL(di);
}
static PyObject *
dictiter_next(dictiterobject *di, PyObject *args)
{
PyObject *key, *value;
if (di->di_used != di->di_dict->ma_used) {
PyErr_SetString(PyExc_RuntimeError,
"dictionary changed size during iteration");
return NULL;
}
if (PyDict_Next((PyObject *)(di->di_dict), &di->di_pos, &key, &value)) {
return (*di->di_select)(key, value);
}
PyErr_SetObject(PyExc_StopIteration, Py_None);
return NULL;
}
static PyObject *
dictiter_getiter(PyObject *it)
{
Py_INCREF(it);
return it;
}
static PyMethodDef dictiter_methods[] = {
{"next", (PyCFunction)dictiter_next, METH_VARARGS,
"it.next() -- get the next value, or raise StopIteration"},
{NULL, NULL} /* sentinel */
};
static PyObject *
dictiter_getattr(dictiterobject *di, char *name)
{
return Py_FindMethod(dictiter_methods, (PyObject *)di, name);
}
static PyObject *dictiter_iternext(dictiterobject *di)
{
PyObject *key, *value;
if (di->di_used != di->di_dict->ma_used) {
PyErr_SetString(PyExc_RuntimeError,
"dictionary changed size during iteration");
return NULL;
}
if (PyDict_Next((PyObject *)(di->di_dict), &di->di_pos, &key, &value)) {
return (*di->di_select)(key, value);
}
return NULL;
}
PyTypeObject PyDictIter_Type = {
PyObject_HEAD_INIT(&PyType_Type)
0, /* ob_size */
"dictionary-iterator", /* tp_name */
sizeof(dictiterobject), /* tp_basicsize */
0, /* tp_itemsize */
/* methods */
(destructor)dictiter_dealloc, /* tp_dealloc */
0, /* tp_print */
(getattrfunc)dictiter_getattr, /* tp_getattr */
0, /* tp_setattr */
0, /* tp_compare */
0, /* tp_repr */
0, /* tp_as_number */
0, /* tp_as_sequence */
0, /* tp_as_mapping */
0, /* tp_hash */
0, /* tp_call */
0, /* tp_str */
0, /* tp_getattro */
0, /* tp_setattro */
0, /* tp_as_buffer */
Py_TPFLAGS_DEFAULT, /* tp_flags */
0, /* tp_doc */
0, /* tp_traverse */
0, /* tp_clear */
0, /* tp_richcompare */
0, /* tp_weaklistoffset */
(getiterfunc)dictiter_getiter, /* tp_iter */
(iternextfunc)dictiter_iternext, /* tp_iternext */
};