Mirror
/
cpython
mirror of https://github.com/python/cpython
4
1
Fork 0
Code Issues Releases Wiki Activity
cpython/Python/opcode_targets.h

259 lines
6.3 KiB
C
Raw Normal View History

Issue #4753: By enabling a configure option named '--with-computed-gotos' on compilers that support it (notably: gcc, SunPro, icc), the bytecode evaluation loop is compiled with a new dispatch mechanism which gives speedups of up to 20%, depending on the system, on various benchmarks.
2009-01-25 12:34:23 -04:00
static void *opcode_targets[256] = {
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&_unknown_opcode,
&&TARGET_POP_TOP,
&&TARGET_ROT_TWO,
&&TARGET_ROT_THREE,
&&TARGET_DUP_TOP,
Issue #9225: Remove the ROT_FOUR and DUP_TOPX opcode, the latter replaced by the new (and simpler) DUP_TOP_TWO. Performance isn't changed, but our bytecode is a bit simplified. Patch by Demur Rumed.
2010-09-04 15:43:52 -03:00
&&TARGET_DUP_TOP_TWO,
bpo-17611. Move unwinding of stack for "pseudo exceptions" from interpreter to compiler. (GH-5006) Co-authored-by: Mark Shannon <mark@hotpy.org> Co-authored-by: Antoine Pitrou <antoine@python.org>
2018-02-22 17:33:30 -04:00
&&TARGET_ROT_FOUR,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&_unknown_opcode,
&&_unknown_opcode,
&&TARGET_NOP,
&&TARGET_UNARY_POSITIVE,
&&TARGET_UNARY_NEGATIVE,
&&TARGET_UNARY_NOT,
&&_unknown_opcode,
&&_unknown_opcode,
&&TARGET_UNARY_INVERT,
PEP 465: a dedicated infix operator for matrix multiplication (closes #21176)
2014-04-10 00:55:56 -03:00
&&TARGET_BINARY_MATRIX_MULTIPLY,
&&TARGET_INPLACE_MATRIX_MULTIPLY,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&_unknown_opcode,
&&TARGET_BINARY_POWER,
&&TARGET_BINARY_MULTIPLY,
&&_unknown_opcode,
&&TARGET_BINARY_MODULO,
&&TARGET_BINARY_ADD,
&&TARGET_BINARY_SUBTRACT,
&&TARGET_BINARY_SUBSCR,
&&TARGET_BINARY_FLOOR_DIVIDE,
&&TARGET_BINARY_TRUE_DIVIDE,
&&TARGET_INPLACE_FLOOR_DIVIDE,
&&TARGET_INPLACE_TRUE_DIVIDE,
bpo-42128: Structural Pattern Matching (PEP 634) (GH-22917) Co-authored-by: Guido van Rossum <guido@python.org> Co-authored-by: Talin <viridia@gmail.com> Co-authored-by: Pablo Galindo <pablogsal@gmail.com>
2021-02-26 18:51:55 -04:00
&&TARGET_GET_LEN,
&&TARGET_MATCH_MAPPING,
&&TARGET_MATCH_SEQUENCE,
&&TARGET_MATCH_KEYS,
&&TARGET_COPY_DICT_WITHOUT_KEYS,
bpo-40222: "Zero cost" exception handling (GH-25729) "Zero cost" exception handling. * Uses a lookup table to determine how to handle exceptions. * Removes SETUP_FINALLY and POP_TOP block instructions, eliminating (most of) the runtime overhead of try statements. * Reduces the size of the frame object by about 60%.
2021-05-07 11:19:19 -03:00
&&TARGET_PUSH_EXC_INFO,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&_unknown_opcode,
bpo-40222: "Zero cost" exception handling (GH-25729) "Zero cost" exception handling. * Uses a lookup table to determine how to handle exceptions. * Removes SETUP_FINALLY and POP_TOP block instructions, eliminating (most of) the runtime overhead of try statements. * Reduces the size of the frame object by about 60%.
2021-05-07 11:19:19 -03:00
&&TARGET_POP_EXCEPT_AND_RERAISE,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
bpo-42246: Make sure that `f_lasti`, and thus `f_lineno`, is set correctly after raising or reraising an exception (GH-23803) * Ensure that f_lasti is set correctly after an exception is raised to conform to PEP 626. * Update importlib * Add NEWS.
2020-12-17 09:55:28 -04:00
&&_unknown_opcode,
Produce cleaner bytecode for 'with' and 'async with' by generating separate code for normal and exceptional paths. (#6641) Remove BEGIN_FINALLY, END_FINALLY, CALL_FINALLY and POP_FINALLY bytecodes. Implement finally blocks by code duplication. Reimplement frame.lineno setter using line numbers rather than bytecode offsets.
2019-11-21 05:11:43 -04:00
&&TARGET_WITH_EXCEPT_START,
PEP 0492 -- Coroutines with async and await syntax. Issue #24017.
2015-05-11 23:57:16 -03:00
&&TARGET_GET_AITER,
&&TARGET_GET_ANEXT,
&&TARGET_BEFORE_ASYNC_WITH,
bpo-40222: "Zero cost" exception handling (GH-25729) "Zero cost" exception handling. * Uses a lookup table to determine how to handle exceptions. * Removes SETUP_FINALLY and POP_TOP block instructions, eliminating (most of) the runtime overhead of try statements. * Reduces the size of the frame object by about 60%.
2021-05-07 11:19:19 -03:00
&&TARGET_BEFORE_WITH,
bpo-33041: Rework compiling an "async for" loop. (#6142) * Added new opcode END_ASYNC_FOR. * Setting global StopAsyncIteration no longer breaks "async for" loops. * Jumping into an "async for" loop is now disabled. * Jumping out of an "async for" loop no longer corrupts the stack. * Simplify the compiler.
2018-03-23 09:34:35 -03:00
&&TARGET_END_ASYNC_FOR,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&TARGET_INPLACE_ADD,
&&TARGET_INPLACE_SUBTRACT,
&&TARGET_INPLACE_MULTIPLY,
&&_unknown_opcode,
&&TARGET_INPLACE_MODULO,
&&TARGET_STORE_SUBSCR,
&&TARGET_DELETE_SUBSCR,
&&TARGET_BINARY_LSHIFT,
&&TARGET_BINARY_RSHIFT,
&&TARGET_BINARY_AND,
&&TARGET_BINARY_XOR,
&&TARGET_BINARY_OR,
&&TARGET_INPLACE_POWER,
&&TARGET_GET_ITER,
Issue #24400: Introduce a distinct type for 'async def' coroutines. Summary of changes: 1. Coroutines now have a distinct, separate from generators type at the C level: PyGen_Type, and a new typedef PyCoroObject. PyCoroObject shares the initial segment of struct layout with PyGenObject, making it possible to reuse existing generators machinery. The new type is exposed as 'types.CoroutineType'. As a consequence of having a new type, CO_GENERATOR flag is no longer applied to coroutines. 2. Having a separate type for coroutines made it possible to add an __await__ method to the type. Although it is not used by the interpreter (see details on that below), it makes coroutines naturally (without using __instancecheck__) conform to collections.abc.Coroutine and collections.abc.Awaitable ABCs. [The __instancecheck__ is still used for generator-based coroutines, as we don't want to add __await__ for generators.] 3. Add new opcode: GET_YIELD_FROM_ITER. The opcode is needed to allow passing native coroutines to the YIELD_FROM opcode. Before this change, 'yield from o' expression was compiled to: (o) GET_ITER LOAD_CONST YIELD_FROM Now, we use GET_YIELD_FROM_ITER instead of GET_ITER. The reason for adding a new opcode is that GET_ITER is used in some contexts (such as 'for .. in' loops) where passing a coroutine object is invalid. 4. Add two new introspection functions to the inspec module: getcoroutinestate(c) and getcoroutinelocals(c). 5. inspect.iscoroutine(o) is updated to test if 'o' is a native coroutine object. Before this commit it used abc.Coroutine, and it was requested to update inspect.isgenerator(o) to use abc.Generator; it was decided, however, that inspect functions should really be tailored for checking for native types. 6. sys.set_coroutine_wrapper(w) API is updated to work with only native coroutines. Since types.coroutine decorator supports any type of callables now, it would be confusing that it does not work for all types of coroutines. 7. Exceptions logic in generators C implementation was updated to raise clearer messages for coroutines: Before: TypeError("generator raised StopIteration") After: TypeError("coroutine raised StopIteration")
2015-06-22 13:19:30 -03:00
&&TARGET_GET_YIELD_FROM_ITER,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&TARGET_PRINT_EXPR,
&&TARGET_LOAD_BUILD_CLASS,
Implement PEP 380 - 'yield from' (closes #11682)
2012-01-13 07:43:40 -04:00
&&TARGET_YIELD_FROM,
PEP 0492 -- Coroutines with async and await syntax. Issue #24017.
2015-05-11 23:57:16 -03:00
&&TARGET_GET_AWAITABLE,
bpo-34880: Add the LOAD_ASSERTION_ERROR opcode. (GH-15073) Fix assert statement misbehavior if AssertionError is shadowed.
2019-08-25 06:44:09 -03:00
&&TARGET_LOAD_ASSERTION_ERROR,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&TARGET_INPLACE_LSHIFT,
&&TARGET_INPLACE_RSHIFT,
&&TARGET_INPLACE_AND,
&&TARGET_INPLACE_XOR,
&&TARGET_INPLACE_OR,
bpo-17611. Move unwinding of stack for "pseudo exceptions" from interpreter to compiler. (GH-5006) Co-authored-by: Mark Shannon <mark@hotpy.org> Co-authored-by: Antoine Pitrou <antoine@python.org>
2018-02-22 17:33:30 -04:00
&&_unknown_opcode,
Produce cleaner bytecode for 'with' and 'async with' by generating separate code for normal and exceptional paths. (#6641) Remove BEGIN_FINALLY, END_FINALLY, CALL_FINALLY and POP_FINALLY bytecodes. Implement finally blocks by code duplication. Reimplement frame.lineno setter using line numbers rather than bytecode offsets.
2019-11-21 05:11:43 -04:00
&&_unknown_opcode,
bpo-39320: Handle unpacking of *values in compiler (GH-17984) * Add three new bytecodes: LIST_TO_TUPLE, LIST_EXTEND, SET_UPDATE. Use them to implement star unpacking expressions. * Remove four bytecodes BUILD_LIST_UNPACK, BUILD_TUPLE_UNPACK, BUILD_SET_UNPACK and BUILD_TUPLE_UNPACK_WITH_CALL opcodes as they are now unused. * Update magic number and dis.rst for new bytecodes.
2020-01-23 05:25:17 -04:00
&&TARGET_LIST_TO_TUPLE,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&TARGET_RETURN_VALUE,
&&TARGET_IMPORT_STAR,
Issue #27985: Implement PEP 526 -- Syntax for Variable Annotations. Patch by Ivan Levkivskyi.
2016-09-09 00:50:03 -03:00
&&TARGET_SETUP_ANNOTATIONS,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&TARGET_YIELD_VALUE,
bpo-40222: "Zero cost" exception handling (GH-25729) "Zero cost" exception handling. * Uses a lookup table to determine how to handle exceptions. * Removes SETUP_FINALLY and POP_TOP block instructions, eliminating (most of) the runtime overhead of try statements. * Reduces the size of the frame object by about 60%.
2021-05-07 11:19:19 -03:00
&&_unknown_opcode,
Produce cleaner bytecode for 'with' and 'async with' by generating separate code for normal and exceptional paths. (#6641) Remove BEGIN_FINALLY, END_FINALLY, CALL_FINALLY and POP_FINALLY bytecodes. Implement finally blocks by code duplication. Reimplement frame.lineno setter using line numbers rather than bytecode offsets.
2019-11-21 05:11:43 -04:00
&&_unknown_opcode,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&TARGET_POP_EXCEPT,
&&TARGET_STORE_NAME,
&&TARGET_DELETE_NAME,
&&TARGET_UNPACK_SEQUENCE,
&&TARGET_FOR_ITER,
&&TARGET_UNPACK_EX,
&&TARGET_STORE_ATTR,
&&TARGET_DELETE_ATTR,
&&TARGET_STORE_GLOBAL,
&&TARGET_DELETE_GLOBAL,
bpo-43754: Eliminate bindings for partial pattern matches (GH-25229)
2021-05-02 17:02:10 -03:00
&&TARGET_ROT_N,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&TARGET_LOAD_CONST,
&&TARGET_LOAD_NAME,
&&TARGET_BUILD_TUPLE,
&&TARGET_BUILD_LIST,
&&TARGET_BUILD_SET,
&&TARGET_BUILD_MAP,
&&TARGET_LOAD_ATTR,
&&TARGET_COMPARE_OP,
&&TARGET_IMPORT_NAME,
&&TARGET_IMPORT_FROM,
&&TARGET_JUMP_FORWARD,
&&TARGET_JUMP_IF_FALSE_OR_POP,
&&TARGET_JUMP_IF_TRUE_OR_POP,
&&TARGET_JUMP_ABSOLUTE,
&&TARGET_POP_JUMP_IF_FALSE,
&&TARGET_POP_JUMP_IF_TRUE,
&&TARGET_LOAD_GLOBAL,
bpo-39156: Break up COMPARE_OP into four logically distinct opcodes. (GH-17754) Break up COMPARE_OP into four logically distinct opcodes: * COMPARE_OP for rich comparisons * IS_OP for 'is' and 'is not' tests * CONTAINS_OP for 'in' and 'is not' tests * JUMP_IF_NOT_EXC_MATCH for checking exceptions in 'try-except' statements.
2020-01-14 06:12:45 -04:00
&&TARGET_IS_OP,
&&TARGET_CONTAINS_OP,
bpo-42246: Make sure that `f_lasti`, and thus `f_lineno`, is set correctly after raising or reraising an exception (GH-23803) * Ensure that f_lasti is set correctly after an exception is raised to conform to PEP 626. * Update importlib * Add NEWS.
2020-12-17 09:55:28 -04:00
&&TARGET_RERAISE,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&_unknown_opcode,
bpo-39156: Break up COMPARE_OP into four logically distinct opcodes. (GH-17754) Break up COMPARE_OP into four logically distinct opcodes: * COMPARE_OP for rich comparisons * IS_OP for 'is' and 'is not' tests * CONTAINS_OP for 'in' and 'is not' tests * JUMP_IF_NOT_EXC_MATCH for checking exceptions in 'try-except' statements.
2020-01-14 06:12:45 -04:00
&&TARGET_JUMP_IF_NOT_EXC_MATCH,
bpo-40222: "Zero cost" exception handling (GH-25729) "Zero cost" exception handling. * Uses a lookup table to determine how to handle exceptions. * Removes SETUP_FINALLY and POP_TOP block instructions, eliminating (most of) the runtime overhead of try statements. * Reduces the size of the frame object by about 60%.
2021-05-07 11:19:19 -03:00
&&_unknown_opcode,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&_unknown_opcode,
&&TARGET_LOAD_FAST,
&&TARGET_STORE_FAST,
&&TARGET_DELETE_FAST,
bpo-32550. Remove the STORE_ANNOTATION bytecode. (GH-5181)
2018-01-29 20:41:04 -04:00
&&_unknown_opcode,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&_unknown_opcode,
bpo-43683: Handle generator entry in bytecode (GH-25138) * Handle check for sending None to starting generator and coroutine into bytecode. * Document new bytecode and make it fail gracefully if mis-compiled.
2021-04-06 07:48:59 -03:00
&&TARGET_GEN_START,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&TARGET_RAISE_VARARGS,
&&TARGET_CALL_FUNCTION,
&&TARGET_MAKE_FUNCTION,
&&TARGET_BUILD_SLICE,
Issue #27095: Simplified MAKE_FUNCTION and removed MAKE_CLOSURE opcodes. Patch by Demur Rumed.
2016-06-12 11:36:24 -03:00
&&_unknown_opcode,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&TARGET_LOAD_CLOSURE,
&&TARGET_LOAD_DEREF,
&&TARGET_STORE_DEREF,
#4617: Previously it was illegal to delete a name from the local namespace if it occurs as a free variable in a nested block. This limitation of the compiler has been lifted, and a new opcode introduced (DELETE_DEREF). This sample was valid in 2.6, but fails to compile in 3.x without this change:: >>> def f(): ... def print_error(): ... print(e) ... try: ... something ... except Exception as e: ... print_error() ... # implicit "del e" here This sample has always been invalid in Python, and now works:: >>> def outer(x): ... def inner(): ... return x ... inner() ... del x There is no need to bump the PYC magic number: the new opcode is used for code that did not compile before.
2010-09-10 18:39:53 -03:00
&&TARGET_DELETE_DEREF,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&_unknown_opcode,
Rework CALL_FUNCTION* opcodes Issue #27213: Rework CALL_FUNCTION* opcodes to produce shorter and more efficient bytecode: * CALL_FUNCTION now only accepts position arguments * CALL_FUNCTION_KW accepts position arguments and keyword arguments, but keys of keyword arguments are packed into a constant tuple. * CALL_FUNCTION_EX is the most generic, it expects a tuple and a dict for positional and keyword arguments. CALL_FUNCTION_VAR and CALL_FUNCTION_VAR_KW opcodes have been removed. 2 tests of test_traceback are currently broken: skip test, the issue #28050 was created to track the issue. Patch by Demur Rumed, design by Serhiy Storchaka, reviewed by Serhiy Storchaka and Victor Stinner.
2016-09-09 14:17:08 -03:00
&&_unknown_opcode,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&TARGET_CALL_FUNCTION_KW,
Rework CALL_FUNCTION* opcodes Issue #27213: Rework CALL_FUNCTION* opcodes to produce shorter and more efficient bytecode: * CALL_FUNCTION now only accepts position arguments * CALL_FUNCTION_KW accepts position arguments and keyword arguments, but keys of keyword arguments are packed into a constant tuple. * CALL_FUNCTION_EX is the most generic, it expects a tuple and a dict for positional and keyword arguments. CALL_FUNCTION_VAR and CALL_FUNCTION_VAR_KW opcodes have been removed. 2 tests of test_traceback are currently broken: skip test, the issue #28050 was created to track the issue. Patch by Demur Rumed, design by Serhiy Storchaka, reviewed by Serhiy Storchaka and Victor Stinner.
2016-09-09 14:17:08 -03:00
&&TARGET_CALL_FUNCTION_EX,
bpo-40222: "Zero cost" exception handling (GH-25729) "Zero cost" exception handling. * Uses a lookup table to determine how to handle exceptions. * Removes SETUP_FINALLY and POP_TOP block instructions, eliminating (most of) the runtime overhead of try statements. * Reduces the size of the frame object by about 60%.
2021-05-07 11:19:19 -03:00
&&_unknown_opcode,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&TARGET_EXTENDED_ARG,
&&TARGET_LIST_APPEND,
&&TARGET_SET_ADD,
&&TARGET_MAP_ADD,
check local class namespace before reaching for cells (closes #17853)
2013-04-30 10:41:40 -03:00
&&TARGET_LOAD_CLASSDEREF,
bpo-39320: Handle unpacking of *values in compiler (GH-17984) * Add three new bytecodes: LIST_TO_TUPLE, LIST_EXTEND, SET_UPDATE. Use them to implement star unpacking expressions. * Remove four bytecodes BUILD_LIST_UNPACK, BUILD_TUPLE_UNPACK, BUILD_SET_UNPACK and BUILD_TUPLE_UNPACK_WITH_CALL opcodes as they are now unused. * Update magic number and dis.rst for new bytecodes.
2020-01-23 05:25:17 -04:00
&&_unknown_opcode,
bpo-39320: Handle unpacking of **values in compiler (GH-18141) * Add DICT_UPDATE and DICT_MERGE bytecodes. Use them for ** unpacking. * Remove BUILD_MAP_UNPACK and BUILD_MAP_UNPACK_WITH_CALL, as they are now unused. * Update magic number for ** unpacking opcodes. * Update dis.rst to incorporate new bytecodes. * Add blurb entry.
2020-01-27 05:57:45 -04:00
&&_unknown_opcode,
&&_unknown_opcode,
bpo-42128: Structural Pattern Matching (PEP 634) (GH-22917) Co-authored-by: Guido van Rossum <guido@python.org> Co-authored-by: Talin <viridia@gmail.com> Co-authored-by: Pablo Galindo <pablogsal@gmail.com>
2021-02-26 18:51:55 -04:00
&&TARGET_MATCH_CLASS,
bpo-39320: Handle unpacking of *values in compiler (GH-17984) * Add three new bytecodes: LIST_TO_TUPLE, LIST_EXTEND, SET_UPDATE. Use them to implement star unpacking expressions. * Remove four bytecodes BUILD_LIST_UNPACK, BUILD_TUPLE_UNPACK, BUILD_SET_UNPACK and BUILD_TUPLE_UNPACK_WITH_CALL opcodes as they are now unused. * Update magic number and dis.rst for new bytecodes.
2020-01-23 05:25:17 -04:00
&&_unknown_opcode,
bpo-40222: "Zero cost" exception handling (GH-25729) "Zero cost" exception handling. * Uses a lookup table to determine how to handle exceptions. * Removes SETUP_FINALLY and POP_TOP block instructions, eliminating (most of) the runtime overhead of try statements. * Reduces the size of the frame object by about 60%.
2021-05-07 11:19:19 -03:00
&&_unknown_opcode,
Issue 25483: Add an opcode to make f-string formatting more robust.
2015-11-03 13:45:05 -04:00
&&TARGET_FORMAT_VALUE,
Issue #27140: Added BUILD_CONST_KEY_MAP opcode.
2016-06-11 18:39:41 -03:00
&&TARGET_BUILD_CONST_KEY_MAP,
Issue #27078: Added BUILD_STRING opcode. Optimized f-strings evaluation.
2016-09-06 16:07:53 -03:00
&&TARGET_BUILD_STRING,
bpo-39320: Handle unpacking of *values in compiler (GH-17984) * Add three new bytecodes: LIST_TO_TUPLE, LIST_EXTEND, SET_UPDATE. Use them to implement star unpacking expressions. * Remove four bytecodes BUILD_LIST_UNPACK, BUILD_TUPLE_UNPACK, BUILD_SET_UNPACK and BUILD_TUPLE_UNPACK_WITH_CALL opcodes as they are now unused. * Update magic number and dis.rst for new bytecodes.
2020-01-23 05:25:17 -04:00
&&_unknown_opcode,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&_unknown_opcode,
Issue #26110: Add LOAD_METHOD/CALL_METHOD opcodes. Special thanks to INADA Naoki for pushing the patch through the last mile, Serhiy Storchaka for reviewing the code, and to Victor Stinner for suggesting the idea (originally implemented in the PyPy project).
2016-12-13 20:03:51 -04:00
&&TARGET_LOAD_METHOD,
&&TARGET_CALL_METHOD,
bpo-39320: Handle unpacking of *values in compiler (GH-17984) * Add three new bytecodes: LIST_TO_TUPLE, LIST_EXTEND, SET_UPDATE. Use them to implement star unpacking expressions. * Remove four bytecodes BUILD_LIST_UNPACK, BUILD_TUPLE_UNPACK, BUILD_SET_UNPACK and BUILD_TUPLE_UNPACK_WITH_CALL opcodes as they are now unused. * Update magic number and dis.rst for new bytecodes.
2020-01-23 05:25:17 -04:00
&&TARGET_LIST_EXTEND,
&&TARGET_SET_UPDATE,
bpo-39320: Handle unpacking of **values in compiler (GH-18141) * Add DICT_UPDATE and DICT_MERGE bytecodes. Use them for ** unpacking. * Remove BUILD_MAP_UNPACK and BUILD_MAP_UNPACK_WITH_CALL, as they are now unused. * Update magic number for ** unpacking opcodes. * Update dis.rst to incorporate new bytecodes. * Add blurb entry.
2020-01-27 05:57:45 -04:00
&&TARGET_DICT_MERGE,
&&TARGET_DICT_UPDATE,
bpo-26110: Add ``CALL_METHOD_KW`` opcode to speedup method calls with keywords (GH-26014) * Add CALL_METHOD_KW * Make CALL_METHOD branchless too since it shares the same code * Place parentheses in STACK_SHRINK
2021-05-15 12:15:23 -03:00
&&TARGET_CALL_METHOD_KW,
Recorded merge of revisions 81029 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r81029 | antoine.pitrou | 2010-05-09 16:46:46 +0200 (dim., 09 mai 2010) | 3 lines Untabify C files. Will watch buildbots. ........
2010-05-09 12:52:27 -03:00
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode,
&&_unknown_opcode
Issue #4753: By enabling a configure option named '--with-computed-gotos' on compilers that support it (notably: gcc, SunPro, icc), the bytecode evaluation loop is compiled with a new dispatch mechanism which gives speedups of up to 20%, depending on the system, on various benchmarks.
2009-01-25 12:34:23 -04:00
};