topics={'assert':u'\nThe "assert" statement\n**********************\n\nAssert statements are a convenient way to insert debugging assertions\ninto a program:\n\n assert_stmt ::= "assert" expression ["," expression]\n\nThe simple form, "assert expression", is equivalent to\n\n if __debug__:\n if not expression: raise AssertionError\n\nThe extended form, "assert expression1, expression2", is equivalent to\n\n if __debug__:\n if not expression1: raise AssertionError(expression2)\n\nThese equivalences assume that "__debug__" and "AssertionError" refer\nto the built-in variables with those names. In the current\nimplementation, the built-in variable "__debug__" is "True" under\nnormal circumstances, "False" when optimization is requested (command\nline option -O). The current code generator emits no code for an\nassert statement when optimization is requested at compile time. Note\nthat it is unnecessary to include the source code for the expression\nthat failed in the error message; it will be displayed as part of the\nstack trace.\n\nAssignments to "__debug__" are illegal. The value for the built-in\nvariable is determined when the interpreter starts.\n',
'assignment':u'\nAssignment statements\n*********************\n\nAssignment statements are used to (re)bind names to values and to\nmodify attributes or items of mutable objects:\n\n assignment_stmt ::= (target_list "=")+ (expression_list | yield_expression)\n target_list ::= target ("," target)* [","]\n target ::= identifier\n | "(" target_list ")"\n | "[" target_list "]"\n | attributeref\n | subscription\n | slicing\n | "*" target\n\n(See section *Primaries* for the syntax definitions for\n*attributeref*, *subscription*, and *slicing*.)\n\nAn assignment statement evaluates the expression list (remember that\nthis can be a single expression or a comma-separated list, the latter\nyielding a tuple) and assigns the single resulting object to each of\nthe target lists, from left to right.\n\nAssignment is defined recursively depending on the form of the target\n(list). When a target is part of a mutable object (an attribute\nreference, subscription or slicing), the mutable object must\nultimately perform the assignment and decide about its validity, and\nmay raise an exception if the assignment is unacceptable. The rules\nobserved by various types and the exceptions raised are given with the\ndefinition of the object types (see section *The standard type\nhierarchy*).\n\nAssignment of an object to a target list, optionally enclosed in\nparentheses or square brackets, is recursively defined as follows.\n\n* If the target list is a single target: The object is assigned to\n that target.\n\n* If the target list is a comma-separated list of targets: The\n object must be an iterable with the same number of items as there\n are targets in the target list, and the items are assigned, from\n left to right, to the corresponding targets.\n\n * If the target list contains one target prefixed with an\n asterisk, called a "starred" target: The object must be a sequence\n with at least as many items as there are targets in the target\n list, minus one. The first items of the sequence are assigned,\n from left to right, to the targets before the starred target. The\n final items of the sequence are assigned to the targets after the\n starred target. A list of the remaining items in the sequence is\n then assigned to the starred target (the list can be empty).\n\n * Else: The object must be a sequence with the same number of\n items as there are targets in the target list, and the items are\n assigned, from left to right, to the corresponding targets.\n\nAssignment of an object to a single target is recursively defined as\nfollows.\n\n* If the target is an identifier (name):\n\n * If the name does not occur in a "global" or "nonlocal" statement\n in the current code block: the name is bound to the object in the\n current local namespace.\n\n * Otherwise: the name is bound to the object in the global\n namespace or the outer namespace determined by "nonlocal",\n respectively.\n\n The name is rebound if it was already bound. This may cause the\n reference count for the object previously bound to the name to reach\n zero, causing the object to be deallocated and its destructor (if it\n has one) to be called.\n\n* If the target is a target list enclosed in parentheses or in\n square brackets: The object must be an iterable with the same number\n of items as there are targets in the target list, and its items are\n assigned, from left to right, to the corresponding targets.\n\n* If the target is an attribute reference: The primary expression in\n the reference is evaluated. It should yield an object with\n assignable attributes; if this is not the case, "TypeError" is\n raised. That object is then asked to assign the assigned object to\n the given attribute; if it cannot perform the assignment, it raises\n an exception (usually but not necessarily "AttributeError").\n\n Note: If the object is a class instance and the attribute reference\n occurs on both sides of the assignment op
'atom-identifiers':u'\nIdentifiers (Names)\n*******************\n\nAn identifier occurring as an atom is a name. See section\n*Identifiers and keywords* for lexical definition and section *Naming\nand binding* for documentation of naming and binding.\n\nWhen the name is bound to an object, evaluation of the atom yields\nthat object. When a name is not bound, an attempt to evaluate it\nraises a "NameError" exception.\n\n**Private name mangling:** When an identifier that textually occurs in\na class definition begins with two or more underscore characters and\ndoes not end in two or more underscores, it is considered a *private\nname* of that class. Private names are transformed to a longer form\nbefore code is generated for them. The transformation inserts the\nclass name, with leading underscores removed and a single underscore\ninserted, in front of the name. For example, the identifier "__spam"\noccurring in a class named "Ham" will be transformed to "_Ham__spam".\nThis transformation is independent of the syntactical context in which\nthe identifier is used. If the transformed name is extremely long\n(longer than 255 characters), implementation defined truncation may\nhappen. If the class name consists only of underscores, no\ntransformation is done.\n',
'atom-literals':u"\nLiterals\n********\n\nPython supports string and bytes literals and various numeric\nliterals:\n\n literal ::= stringliteral | bytesliteral\n | integer | floatnumber | imagnumber\n\nEvaluation of a literal yields an object of the given type (string,\nbytes, integer, floating point number, complex number) with the given\nvalue. The value may be approximated in the case of floating point\nand imaginary (complex) literals. See section *Literals* for details.\n\nAll literals correspond to immutable data types, and hence the\nobject's identity is less important than its value. Multiple\nevaluations of literals with the same value (either the same\noccurrence in the program text or a different occurrence) may obtain\nthe same object or a different object with the same value.\n",
'attribute-access':u'\nCustomizing attribute access\n****************************\n\nThe following methods can be defined to customize the meaning of\nattribute access (use of, assignment to, or deletion of "x.name") for\nclass instances.\n\nobject.__getattr__(self, name)\n\n Called when an attribute lookup has not found the attribute in the\n usual places (i.e. it is not an instance attribute nor is it found\n in the class tree for "self"). "name" is the attribute name. This\n method should return the (computed) attribute value or raise an\n"AttributeError" exception.\n\n Note that if the attribute is found through the normal mechanism,\n"__getattr__()" is not called. (This is an intentional asymmetry\n between "__getattr__()" and "__setattr__()".) This is done both for\n efficiency reasons and because otherwise "__getattr__()" would have\n no way to access other attributes of the instance. Note that at\n least for instance variables, you can fake total control by not\n inserting any values in the instance attribute dictionary (but\n instead inserting them in another object). See the\n"__getattribute__()" method below for a way to actually get total\n control over attribute access.\n\nobject.__getattribute__(self, name)\n\n Called unconditionally to implement attribute accesses for\n instances of the class. If the class also defines "__getattr__()",\n the latter will not be called unless "__getattribute__()" either\n calls it explicitly or raises an "AttributeError". This method\n should return the (computed) attribute value or raise an\n"AttributeError" exception. In order to avoid infinite recursion in\n this method, its implementation should always call the base class\n method with the same name to access any attributes it needs, for\n example, "object.__getattribute__(self, name)".\n\n Note: This method may still be bypassed when looking up special\n methods as the result of implicit invocation via language syntax\n or built-in functions. See *Special method lookup*.\n\nobject.__setattr__(self, name, value)\n\n Called when an attribute assignment is attempted. This is called\n instead of the normal mechanism (i.e. store the value in the\n instance dictionary). *name* is the attribute name, *value* is the\n value to be assigned to it.\n\n If "__setattr__()" wants to assign to an instance attribute, it\n should call the base class method with the same name, for example,\n"object.__setattr__(self, name, value)".\n\nobject.__delattr__(self, name)\n\n Like "__setattr__()" but for attribute deletion instead of\n assignment. This should only be implemented if "del obj.name" is\n meaningful for the object.\n\nobject.__dir__(self)\n\n Called when "dir()" is called on the object. A sequence must be\n returned. "dir()" converts the returned sequence to a list and\n sorts it.\n\n\nImplementing Descriptors\n========================\n\nThe following methods only apply when an instance of the class\ncontaining the method (a so-called *descriptor* class) appears in an\n*owner* class (the descriptor must be in either the owner\'s class\ndictionary or in the class dictionary for one of its parents). In the\nexamples below, "the attribute" refers to the attribute whose name is\nthe key of the property in the owner class\'"__dict__".\n\nobject.__get__(self, instance, owner)\n\n Called to get the attribute of the owner class (class attribute\n access) or of an instance of that class (instance attribute\n access). *owner* is always the owner class, while *instance* is the\n instance that the attribute was accessed through, or "None" when\n the attribute is accessed through the *owner*. This method should\n return the (computed) attribute value or raise an "AttributeError"\n exception.\n\nobject.__set__(self, instance, value)\n\n Called to set the attribute on an instance *instance* of the owner\n class to a new value, *value*.\n\nobject.__delete__(self, instance)\n\n Called to delete the attribute on an instance *insta
'attribute-references':u'\nAttribute references\n********************\n\nAn attribute reference is a primary followed by a period and a name:\n\n attributeref ::= primary "." identifier\n\nThe primary must evaluate to an object of a type that supports\nattribute references, which most objects do. This object is then\nasked to produce the attribute whose name is the identifier. This\nproduction can be customized by overriding the "__getattr__()" method.\nIf this attribute is not available, the exception "AttributeError" is\nraised. Otherwise, the type and value of the object produced is\ndetermined by the object. Multiple evaluations of the same attribute\nreference may yield different objects.\n',
'augassign':u'\nAugmented assignment statements\n*******************************\n\nAugmented assignment is the combination, in a single statement, of a\nbinary operation and an assignment statement:\n\n augmented_assignment_stmt ::= augtarget augop (expression_list | yield_expression)\n augtarget ::= identifier | attributeref | subscription | slicing\n augop ::= "+=" | "-=" | "*=" | "@=" | "/=" | "//=" | "%=" | "**="\n | ">>=" | "<<=" | "&=" | "^=" | "|="\n\n(See section *Primaries* for the syntax definitions of the last three\nsymbols.)\n\nAn augmented assignment evaluates the target (which, unlike normal\nassignment statements, cannot be an unpacking) and the expression\nlist, performs the binary operation specific to the type of assignment\non the two operands, and assigns the result to the original target.\nThe target is only evaluated once.\n\nAn augmented assignment expression like "x += 1" can be rewritten as\n"x = x + 1" to achieve a similar, but not exactly equal effect. In the\naugmented version, "x" is only evaluated once. Also, when possible,\nthe actual operation is performed *in-place*, meaning that rather than\ncreating a new object and assigning that to the target, the old object\nis modified instead.\n\nUnlike normal assignments, augmented assignments evaluate the left-\nhand side *before* evaluating the right-hand side. For example, "a[i]\n+= f(x)" first looks-up "a[i]", then it evaluates "f(x)" and performs\nthe addition, and lastly, it writes the result back to "a[i]".\n\nWith the exception of assigning to tuples and multiple targets in a\nsingle statement, the assignment done by augmented assignment\nstatements is handled the same way as normal assignments. Similarly,\nwith the exception of the possible *in-place* behavior, the binary\noperation performed by augmented assignment is the same as the normal\nbinary operations.\n\nFor targets which are attribute references, the same *caveat about\nclass and instance attributes* applies as for regular assignments.\n',
'binary':u'\nBinary arithmetic operations\n****************************\n\nThe binary arithmetic operations have the conventional priority\nlevels. Note that some of these operations also apply to certain non-\nnumeric types. Apart from the power operator, there are only two\nlevels, one for multiplicative operators and one for additive\noperators:\n\n m_expr ::= u_expr | m_expr "*" u_expr | m_expr "@" m_expr |\n m_expr "//" u_expr| m_expr "/" u_expr |\n m_expr "%" u_expr\n a_expr ::= m_expr | a_expr "+" m_expr | a_expr "-" m_expr\n\nThe "*" (multiplication) operator yields the product of its arguments.\nThe arguments must either both be numbers, or one argument must be an\ninteger and the other must be a sequence. In the former case, the\nnumbers are converted to a common type and then multiplied together.\nIn the latter case, sequence repetition is performed; a negative\nrepetition factor yields an empty sequence.\n\nThe "@" (at) operator is intended to be used for matrix\nmultiplication. No builtin Python types implement this operator.\n\nNew in version 3.5.\n\nThe "/" (division) and "//" (floor division) operators yield the\nquotient of their arguments. The numeric arguments are first\nconverted to a common type. Division of integers yields a float, while\nfloor division of integers results in an integer; the result is that\nof mathematical division with the \'floor\' function applied to the\nresult. Division by zero raises the "ZeroDivisionError" exception.\n\nThe "%" (modulo) operator yields the remainder from the division of\nthe first argument by the second. The numeric arguments are first\nconverted to a common type. A zero right argument raises the\n"ZeroDivisionError" exception. The arguments may be floating point\nnumbers, e.g., "3.14%0.7" equals "0.34" (since "3.14" equals "4*0.7 +\n0.34".) The modulo operator always yields a result with the same sign\nas its second operand (or zero); the absolute value of the result is\nstrictly smaller than the absolute value of the second operand [1].\n\nThe floor division and modulo operators are connected by the following\nidentity: "x == (x//y)*y + (x%y)". Floor division and modulo are also\nconnected with the built-in function "divmod()": "divmod(x, y) ==\n(x//y, x%y)". [2].\n\nIn addition to performing the modulo operation on numbers, the "%"\noperator is also overloaded by string objects to perform old-style\nstring formatting (also known as interpolation). The syntax for\nstring formatting is described in the Python Library Reference,\nsection *printf-style String Formatting*.\n\nThe floor division operator, the modulo operator, and the "divmod()"\nfunction are not defined for complex numbers. Instead, convert to a\nfloating point number using the "abs()" function if appropriate.\n\nThe "+" (addition) operator yields the sum of its arguments. The\narguments must either both be numbers or both be sequences of the same\ntype. In the former case, the numbers are converted to a common type\nand then added together. In the latter case, the sequences are\nconcatenated.\n\nThe "-" (subtraction) operator yields the difference of its arguments.\nThe numeric arguments are first converted to a common type.\n',
'bitwise':u'\nBinary bitwise operations\n*************************\n\nEach of the three bitwise operations has a different priority level:\n\n and_expr ::= shift_expr | and_expr "&" shift_expr\n xor_expr ::= and_expr | xor_expr "^" and_expr\n or_expr ::= xor_expr | or_expr "|" xor_expr\n\nThe "&" operator yields the bitwise AND of its arguments, which must\nbe integers.\n\nThe "^" operator yields the bitwise XOR (exclusive OR) of its\narguments, which must be integers.\n\nThe "|" operator yields the bitwise (inclusive) OR of its arguments,\nwhich must be integers.\n',
'bltin-code-objects':u'\nCode Objects\n************\n\nCode objects are used by the implementation to represent "pseudo-\ncompiled" executable Python code such as a function body. They differ\nfrom function objects because they don\'t contain a reference to their\nglobal execution environment. Code objects are returned by the built-\nin "compile()" function and can be extracted from function objects\nthrough their "__code__" attribute. See also the "code" module.\n\nA code object can be executed or evaluated by passing it (instead of a\nsource string) to the "exec()" or "eval()" built-in functions.\n\nSee *The standard type hierarchy* for more information.\n',
'bltin-ellipsis-object':u'\nThe Ellipsis Object\n*******************\n\nThis object is commonly used by slicing (see *Slicings*). It supports\nno special operations. There is exactly one ellipsis object, named\n"Ellipsis" (a built-in name). "type(Ellipsis)()" produces the\n"Ellipsis" singleton.\n\nIt is written as "Ellipsis" or "...".\n',
'bltin-null-object':u'\nThe Null Object\n***************\n\nThis object is returned by functions that don\'t explicitly return a\nvalue. It supports no special operations. There is exactly one null\nobject, named "None" (a built-in name). "type(None)()" produces the\nsame singleton.\n\nIt is written as "None".\n',
'bltin-type-objects':u'\nType Objects\n************\n\nType objects represent the various object types. An object\'s type is\naccessed by the built-in function "type()". There are no special\noperations on types. The standard module "types" defines names for\nall standard built-in types.\n\nTypes are written like this: "<class \'int\'>".\n',
'booleans':u'\nBoolean operations\n******************\n\n or_test ::= and_test | or_test "or" and_test\n and_test ::= not_test | and_test "and" not_test\n not_test ::= comparison | "not" not_test\n\nIn the context of Boolean operations, and also when expressions are\nused by control flow statements, the following values are interpreted\nas false: "False", "None", numeric zero of all types, and empty\nstrings and containers (including strings, tuples, lists,\ndictionaries, sets and frozensets). All other values are interpreted\nas true. User-defined objects can customize their truth value by\nproviding a "__bool__()" method.\n\nThe operator "not" yields "True" if its argument is false, "False"\notherwise.\n\nThe expression "x and y" first evaluates *x*; if *x* is false, its\nvalue is returned; otherwise, *y* is evaluated and the resulting value\nis returned.\n\nThe expression "x or y" first evaluates *x*; if *x* is true, its value\nis returned; otherwise, *y* is evaluated and the resulting value is\nreturned.\n\n(Note that neither "and" nor "or" restrict the value and type they\nreturn to "False" and "True", but rather return the last evaluated\nargument. This is sometimes useful, e.g., if "s" is a string that\nshould be replaced by a default value if it is empty, the expression\n"s or \'foo\'" yields the desired value. Because "not" has to create a\nnew value, it returns a boolean value regardless of the type of its\nargument (for example, "not \'foo\'" produces "False" rather than "\'\'".)\n',
'break':u'\nThe "break" statement\n*********************\n\n break_stmt ::= "break"\n\n"break" may only occur syntactically nested in a "for" or "while"\nloop, but not nested in a function or class definition within that\nloop.\n\nIt terminates the nearest enclosing loop, skipping the optional "else"\nclause if the loop has one.\n\nIf a "for" loop is terminated by "break", the loop control target\nkeeps its current value.\n\nWhen "break" passes control out of a "try" statement with a "finally"\nclause, that "finally" clause is executed before really leaving the\nloop.\n',
'callable-types':u'\nEmulating callable objects\n**************************\n\nobject.__call__(self[, args...])\n\n Called when the instance is "called" as a function; if this method\n is defined, "x(arg1, arg2, ...)" is a shorthand for\n"x.__call__(arg1, arg2, ...)".\n',
'calls':u'\nCalls\n*****\n\nA call calls a callable object (e.g., a *function*) with a possibly\nempty series of *arguments*:\n\n call ::= primary "(" [argument_list [","] | comprehension] ")"\n argument_list ::= positional_arguments ["," keyword_arguments]\n [",""*" expression] ["," keyword_arguments]\n [",""**" expression]\n | keyword_arguments [",""*" expression]\n ["," keyword_arguments] [",""**" expression]\n | "*" expression ["," keyword_arguments] [",""**" expression]\n | "**" expression\n positional_arguments ::= expression ("," expression)*\n keyword_arguments ::= keyword_item ("," keyword_item)*\n keyword_item ::= identifier "=" expression\n\nAn optional trailing comma may be present after the positional and\nkeyword arguments but does not affect the semantics.\n\nThe primary must evaluate to a callable object (user-defined\nfunctions, built-in functions, methods of built-in objects, class\nobjects, methods of class instances, and all objects having a\n"__call__()" method are callable). All argument expressions are\nevaluated before the call is attempted. Please refer to section\n*Function definitions* for the syntax of formal *parameter* lists.\n\nIf keyword arguments are present, they are first converted to\npositional arguments, as follows. First, a list of unfilled slots is\ncreated for the formal parameters. If there are N positional\narguments, they are placed in the first N slots. Next, for each\nkeyword argument, the identifier is used to determine the\ncorresponding slot (if the identifier is the same as the first formal\nparameter name, the first slot is used, and so on). If the slot is\nalready filled, a "TypeError" exception is raised. Otherwise, the\nvalue of the argument is placed in the slot, filling it (even if the\nexpression is "None", it fills the slot). When all arguments have\nbeen processed, the slots that are still unfilled are filled with the\ncorresponding default value from the function definition. (Default\nvalues are calculated, once, when the function is defined; thus, a\nmutable object such as a list or dictionary used as default value will\nbe shared by all calls that don\'t specify an argument value for the\ncorresponding slot; this should usually be avoided.) If there are any\nunfilled slots for which no default value is specified, a "TypeError"\nexception is raised. Otherwise, the list of filled slots is used as\nthe argument list for the call.\n\n**CPython implementation detail:** An implementation may provide\nbuilt-in functions whose positional parameters do not have names, even\nif they are \'named\' for the purpose of documentation, and which\ntherefore cannot be supplied by keyword. In CPython, this is the case\nfor functions implemented in C that use "PyArg_ParseTuple()" to parse\ntheir arguments.\n\nIf there are more positional arguments than there are formal parameter\nslots, a "TypeError" exception is raised, unless a formal parameter\nusing the syntax "*identifier" is present; in this case, that formal\nparameter receives a tuple containing the excess positional arguments\n(or an empty tuple if there were no excess positional arguments).\n\nIf any keyword argument does not correspond to a formal parameter\nname, a "TypeError" exception is raised, unless a formal parameter\nusing the syntax "**identifier" is present; in this case, that formal\nparameter receives a dictionary containing the excess keyword\narguments (using the keywords as keys and the argument values as\ncorresponding values), or a (new) empty dictionary if there were no\nexcess keyword arguments.\n\nIf the syntax "*expression" appears in the function call, "expression"\nmust evaluate to an iterable. Elements from this iterable are treated\nas if they were additional positional arguments; if there are\npositional arguments *x1*, ..., *xN*, and "expression" evaluates to a\nsequence *y1*, ..., *yM*, this is equivalent
'class':u'\nClass definitions\n*****************\n\nA class definition defines a class object (see section *The standard\ntype hierarchy*):\n\n classdef ::= [decorators] "class" classname [inheritance] ":" suite\n inheritance ::= "(" [parameter_list] ")"\n classname ::= identifier\n\nA class definition is an executable statement. The inheritance list\nusually gives a list of base classes (see *Customizing class creation*\nfor more advanced uses), so each item in the list should evaluate to a\nclass object which allows subclassing. Classes without an inheritance\nlist inherit, by default, from the base class "object"; hence,\n\n class Foo:\n pass\n\nis equivalent to\n\n class Foo(object):\n pass\n\nThe class\'s suite is then executed in a new execution frame (see\n*Naming and binding*), using a newly created local namespace and the\noriginal global namespace. (Usually, the suite contains mostly\nfunction definitions.) When the class\'s suite finishes execution, its\nexecution frame is discarded but its local namespace is saved. [4] A\nclass object is then created using the inheritance list for the base\nclasses and the saved local namespace for the attribute dictionary.\nThe class name is bound to this class object in the original local\nnamespace.\n\nClass creation can be customized heavily using *metaclasses*.\n\nClasses can also be decorated: just like when decorating functions,\n\n @f1(arg)\n @f2\n class Foo: pass\n\nis equivalent to\n\n class Foo: pass\n Foo = f1(arg)(f2(Foo))\n\nThe evaluation rules for the decorator expressions are the same as for\nfunction decorators. The result must be a class object, which is then\nbound to the class name.\n\n**Programmer\'s note:** Variables defined in the class definition are\nclass attributes; they are shared by instances. Instance attributes\ncan be set in a method with "self.name = value". Both class and\ninstance attributes are accessible through the notation ""self.name"",\nand an instance attribute hides a class attribute with the same name\nwhen accessed in this way. Class attributes can be used as defaults\nfor instance attributes, but using mutable values there can lead to\nunexpected results. *Descriptors* can be used to create instance\nvariables with different implementation details.\n\nSee also: **PEP 3115** - Metaclasses in Python 3 **PEP 3129** -\n Class Decorators\n\n-[ Footnotes ]-\n\n[1] The exception is propagated to the invocation stack unless\n there is a "finally" clause which happens to raise another\n exception. That new exception causes the old one to be lost.\n\n[2] Currently, control "flows off the end" except in the case of\n an exception or the execution of a "return", "continue", or\n"break" statement.\n\n[3] A string literal appearing as the first statement in the\n function body is transformed into the function\'s "__doc__"\n attribute and therefore the function\'s *docstring*.\n\n[4] A string literal appearing as the first statement in the class\n body is transformed into the namespace\'s "__doc__" item and\n therefore the class\'s *docstring*.\n',
'comparisons':u'\nComparisons\n***********\n\nUnlike C, all comparison operations in Python have the same priority,\nwhich is lower than that of any arithmetic, shifting or bitwise\noperation. Also unlike C, expressions like "a < b < c" have the\ninterpretation that is conventional in mathematics:\n\n comparison ::= or_expr ( comp_operator or_expr )*\n comp_operator ::= "<" | ">" | "==" | ">=" | "<=" | "!="\n | "is" ["not"] | ["not"] "in"\n\nComparisons yield boolean values: "True" or "False".\n\nComparisons can be chained arbitrarily, e.g., "x < y <= z" is\nequivalent to "x < y and y <= z", except that "y" is evaluated only\nonce (but in both cases "z" is not evaluated at all when "x < y" is\nfound to be false).\n\nFormally, if *a*, *b*, *c*, ..., *y*, *z* are expressions and *op1*,\n*op2*, ..., *opN* are comparison operators, then "a op1 b op2 c ... y\nopN z" is equivalent to "a op1 b and b op2 c and ... y opN z", except\nthat each expression is evaluated at most once.\n\nNote that "a op1 b op2 c" doesn\'t imply any kind of comparison between\n*a* and *c*, so that, e.g., "x < y > z" is perfectly legal (though\nperhaps not pretty).\n\nThe operators "<", ">", "==", ">=", "<=", and "!=" compare the values\nof two objects. The objects need not have the same type. If both are\nnumbers, they are converted to a common type. Otherwise, the "==" and\n"!=" operators *always* consider objects of different types to be\nunequal, while the "<", ">", ">=" and "<=" operators raise a\n"TypeError" when comparing objects of different types that do not\nimplement these operators for the given pair of types. You can\ncontrol comparison behavior of objects of non-built-in types by\ndefining rich comparison methods like "__gt__()", described in section\n*Basic customization*.\n\nComparison of objects of the same type depends on the type:\n\n* Numbers are compared arithmetically.\n\n* The values "float(\'NaN\')" and "Decimal(\'NaN\')" are special. They\n are identical to themselves, "x is x" but are not equal to\n themselves, "x != x". Additionally, comparing any value to a\n not-a-number value will return "False". For example, both "3 <\n float(\'NaN\')" and "float(\'NaN\') < 3" will return "False".\n\n* Bytes objects are compared lexicographically using the numeric\n values of their elements.\n\n* Strings are compared lexicographically using the numeric\n equivalents (the result of the built-in function "ord()") of their\n characters. [3] String and bytes object can\'t be compared!\n\n* Tuples and lists are compared lexicographically using comparison\n of corresponding elements. This means that to compare equal, each\n element must compare equal and the two sequences must be of the same\n type and have the same length.\n\n If not equal, the sequences are ordered the same as their first\n differing elements. For example, "[1,2,x] <= [1,2,y]" has the same\n value as "x <= y". If the corresponding element does not exist, the\n shorter sequence is ordered first (for example, "[1,2] < [1,2,3]").\n\n* Mappings (dictionaries) compare equal if and only if they have the\n same "(key, value)" pairs. Order comparisons "(\'<\', \'<=\', \'>=\',\n\'>\')" raise "TypeError".\n\n* Sets and frozensets define comparison operators to mean subset and\n superset tests. Those relations do not define total orderings (the\n two sets "{1,2}" and {2,3} are not equal, nor subsets of one\n another, nor supersets of one another). Accordingly, sets are not\n appropriate arguments for functions which depend on total ordering.\n For example, "min()", "max()", and "sorted()" produce undefined\n results given a list of sets as inputs.\n\n* Most other objects of built-in types compare unequal unless they\n are the same object; the choice whether one object is considered\n smaller or larger than another one is made arbitrarily but\n consistently within one execution of a program.\n\nComparison of objects of differing types depends on whether either of\nthe types provide explicit support for the comparison. Mos
'compound':u'\nCompound statements\n*******************\n\nCompound statements contain (groups of) other statements; they affect\nor control the execution of those other statements in some way. In\ngeneral, compound statements span multiple lines, although in simple\nincarnations a whole compound statement may be contained in one line.\n\nThe "if", "while" and "for" statements implement traditional control\nflow constructs. "try" specifies exception handlers and/or cleanup\ncode for a group of statements, while the "with" statement allows the\nexecution of initialization and finalization code around a block of\ncode. Function and class definitions are also syntactically compound\nstatements.\n\nA compound statement consists of one or more \'clauses.\' A clause\nconsists of a header and a \'suite.\' The clause headers of a\nparticular compound statement are all at the same indentation level.\nEach clause header begins with a uniquely identifying keyword and ends\nwith a colon. A suite is a group of statements controlled by a\nclause. A suite can be one or more semicolon-separated simple\nstatements on the same line as the header, following the header\'s\ncolon, or it can be one or more indented statements on subsequent\nlines. Only the latter form of a suite can contain nested compound\nstatements; the following is illegal, mostly because it wouldn\'t be\nclear to which "if" clause a following "else" clause would belong:\n\n if test1: if test2: print(x)\n\nAlso note that the semicolon binds tighter than the colon in this\ncontext, so that in the following example, either all or none of the\n"print()" calls are executed:\n\n if x < y < z: print(x); print(y); print(z)\n\nSummarizing:\n\n compound_stmt ::= if_stmt\n | while_stmt\n | for_stmt\n | try_stmt\n | with_stmt\n | funcdef\n | classdef\n suite ::= stmt_list NEWLINE | NEWLINE INDENT statement+ DEDENT\n statement ::= stmt_list NEWLINE | compound_stmt\n stmt_list ::= simple_stmt (";" simple_stmt)* [";"]\n\nNote that statements always end in a "NEWLINE" possibly followed by a\n"DEDENT". Also note that optional continuation clauses always begin\nwith a keyword that cannot start a statement, thus there are no\nambiguities (the \'dangling "else"\' problem is solved in Python by\nrequiring nested "if" statements to be indented).\n\nThe formatting of the grammar rules in the following sections places\neach clause on a separate line for clarity.\n\n\nThe "if" statement\n==================\n\nThe "if" statement is used for conditional execution:\n\n if_stmt ::= "if" expression ":" suite\n ( "elif" expression ":" suite )*\n ["else"":" suite]\n\nIt selects exactly one of the suites by evaluating the expressions one\nby one until one is found to be true (see section *Boolean operations*\nfor the definition of true and false); then that suite is executed\n(and no other part of the "if" statement is executed or evaluated).\nIf all expressions are false, the suite of the "else" clause, if\npresent, is executed.\n\n\nThe "while" statement\n=====================\n\nThe "while" statement is used for repeated execution as long as an\nexpression is true:\n\n while_stmt ::= "while" expression ":" suite\n ["else"":" suite]\n\nThis repeatedly tests the expression and, if it is true, executes the\nfirst suite; if the expression is false (which may be the first time\nit is tested) the suite of the "else" clause, if present, is executed\nand the loop terminates.\n\nA "break" statement executed in the first suite terminates the loop\nwithout executing the "else" clause\'s suite. A "continue" statement\nexecuted in the first suite skips the rest of the suite and goes back\nto testing the expression.\n\n\nThe "for" statement\n===================\n\nThe "for" statement is used to iterate over the elements of a sequence\n(such as a string, tuple or list) or other iterable object:\n\n for_st
'context-managers':u'\nWith Statement Context Managers\n*******************************\n\nA *context manager* is an object that defines the runtime context to\nbe established when executing a "with" statement. The context manager\nhandles the entry into, and the exit from, the desired runtime context\nfor the execution of the block of code. Context managers are normally\ninvoked using the "with" statement (described in section *The with\nstatement*), but can also be used by directly invoking their methods.\n\nTypical uses of context managers include saving and restoring various\nkinds of global state, locking and unlocking resources, closing opened\nfiles, etc.\n\nFor more information on context managers, see *Context Manager Types*.\n\nobject.__enter__(self)\n\n Enter the runtime context related to this object. The "with"\n statement will bind this method\'s return value to the target(s)\n specified in the "as" clause of the statement, if any.\n\nobject.__exit__(self, exc_type, exc_value, traceback)\n\n Exit the runtime context related to this object. The parameters\n describe the exception that caused the context to be exited. If the\n context was exited without an exception, all three arguments will\n be "None".\n\n If an exception is supplied, and the method wishes to suppress the\n exception (i.e., prevent it from being propagated), it should\n return a true value. Otherwise, the exception will be processed\n normally upon exit from this method.\n\n Note that "__exit__()" methods should not reraise the passed-in\n exception; this is the caller\'s responsibility.\n\nSee also: **PEP 0343** - The "with" statement\n\n The specification, background, and examples for the Python "with"\n statement.\n',
'continue':u'\nThe "continue" statement\n************************\n\n continue_stmt ::= "continue"\n\n"continue" may only occur syntactically nested in a "for" or "while"\nloop, but not nested in a function or class definition or "finally"\nclause within that loop. It continues with the next cycle of the\nnearest enclosing loop.\n\nWhen "continue" passes control out of a "try" statement with a\n"finally" clause, that "finally" clause is executed before really\nstarting the next loop cycle.\n',
'conversions':u'\nArithmetic conversions\n**********************\n\nWhen a description of an arithmetic operator below uses the phrase\n"the numeric arguments are converted to a common type," this means\nthat the operator implementation for built-in types works as follows:\n\n* If either argument is a complex number, the other is converted to\n complex;\n\n* otherwise, if either argument is a floating point number, the\n other is converted to floating point;\n\n* otherwise, both must be integers and no conversion is necessary.\n\nSome additional rules apply for certain operators (e.g., a string as a\nleft argument to the \'%\' operator). Extensions must define their own\nconversion behavior.\n',
'customization':u'\nBasic customization\n*******************\n\nobject.__new__(cls[, ...])\n\n Called to create a new instance of class *cls*. "__new__()" is a\n static method (special-cased so you need not declare it as such)\n that takes the class of which an instance was requested as its\n first argument. The remaining arguments are those passed to the\n object constructor expression (the call to the class). The return\n value of "__new__()" should be the new object instance (usually an\n instance of *cls*).\n\n Typical implementations create a new instance of the class by\n invoking the superclass\'s "__new__()" method using\n"super(currentclass, cls).__new__(cls[, ...])" with appropriate\n arguments and then modifying the newly-created instance as\n necessary before returning it.\n\n If "__new__()" returns an instance of *cls*, then the new\n instance\'s "__init__()" method will be invoked like\n"__init__(self[, ...])", where *self* is the new instance and the\n remaining arguments are the same as were passed to "__new__()".\n\n If "__new__()" does not return an instance of *cls*, then the new\n instance\'s "__init__()" method will not be invoked.\n\n"__new__()" is intended mainly to allow subclasses of immutable\n types (like int, str, or tuple) to customize instance creation. It\n is also commonly overridden in custom metaclasses in order to\n customize class creation.\n\nobject.__init__(self[, ...])\n\n Called after the instance has been created (by "__new__()"), but\n before it is returned to the caller. The arguments are those\n passed to the class constructor expression. If a base class has an\n"__init__()" method, the derived class\'s "__init__()" method, if\n any, must explicitly call it to ensure proper initialization of the\n base class part of the instance; for example:\n"BaseClass.__init__(self, [args...])".\n\n Because "__new__()" and "__init__()" work together in constructing\n objects ("__new__()" to create it, and "__init__()" to customise\n it), no non-"None" value may be returned by "__init__()"; doing so\n will cause a "TypeError" to be raised at runtime.\n\nobject.__del__(self)\n\n Called when the instance is about to be destroyed. This is also\n called a destructor. If a base class has a "__del__()" method, the\n derived class\'s "__del__()" method, if any, must explicitly call it\n to ensure proper deletion of the base class part of the instance.\n Note that it is possible (though not recommended!) for the\n"__del__()" method to postpone destruction of the instance by\n creating a new reference to it. It may then be called at a later\n time when this new reference is deleted. It is not guaranteed that\n"__del__()" methods are called for objects that still exist when\n the interpreter exits.\n\n Note: "del x" doesn\'t directly call "x.__del__()" --- the former\n decrements the reference count for "x" by one, and the latter is\n only called when "x"\'s reference count reaches zero. Some common\n situations that may prevent the reference count of an object from\n going to zero include: circular references between objects (e.g.,\n a doubly-linked list or a tree data structure with parent and\n child pointers); a reference to the object on the stack frame of\n a function that caught an exception (the traceback stored in\n"sys.exc_info()[2]" keeps the stack frame alive); or a reference\n to the object on the stack frame that raised an unhandled\n exception in interactive mode (the traceback stored in\n"sys.last_traceback" keeps the stack frame alive). The first\n situation can only be remedied by explicitly breaking the cycles;\n the second can be resolved by freeing the reference to the\n traceback object when it is no longer useful, and the third can\n be resolved by storing "None" in "sys.last_traceback". Circular\n references which are garbage are detected and cleaned up when the\n cyclic garbage collector is enabled (i
'debugger':u'\n"pdb" --- The Python Debugger\n*****************************\n\n**Source code:** Lib/pdb.py\n\n======================================================================\n\nThe module "pdb" defines an interactive source code debugger for\nPython programs. It supports setting (conditional) breakpoints and\nsingle stepping at the source line level, inspection of stack frames,\nsource code listing, and evaluation of arbitrary Python code in the\ncontext of any stack frame. It also supports post-mortem debugging\nand can be called under program control.\n\nThe debugger is extensible -- it is actually defined as the class\n"Pdb". This is currently undocumented but easily understood by reading\nthe source. The extension interface uses the modules "bdb" and "cmd".\n\nThe debugger\'s prompt is "(Pdb)". Typical usage to run a program under\ncontrol of the debugger is:\n\n >>> import pdb\n >>> import mymodule\n >>> pdb.run(\'mymodule.test()\')\n > <string>(0)?()\n (Pdb) continue\n > <string>(1)?()\n (Pdb) continue\n NameError: \'spam\'\n > <string>(1)?()\n (Pdb)\n\nChanged in version 3.3: Tab-completion via the "readline" module is\navailable for commands and command arguments, e.g. the current global\nand local names are offered as arguments of the "p" command.\n\n"pdb.py" can also be invoked as a script to debug other scripts. For\nexample:\n\n python3 -m pdb myscript.py\n\nWhen invoked as a script, pdb will automatically enter post-mortem\ndebugging if the program being debugged exits abnormally. After post-\nmortem debugging (or after normal exit of the program), pdb will\nrestart the program. Automatic restarting preserves pdb\'s state (such\nas breakpoints) and in most cases is more useful than quitting the\ndebugger upon program\'s exit.\n\nNew in version 3.2: "pdb.py" now accepts a "-c" option that executes\ncommands as if given in a ".pdbrc" file, see *Debugger Commands*.\n\nThe typical usage to break into the debugger from a running program is\nto insert\n\n import pdb; pdb.set_trace()\n\nat the location you want to break into the debugger. You can then\nstep through the code following this statement, and continue running\nwithout the debugger using the "continue" command.\n\nThe typical usage to inspect a crashed program is:\n\n >>> import pdb\n >>> import mymodule\n >>> mymodule.test()\n Traceback (most recent call last):\n File "<stdin>", line 1, in ?\n File "./mymodule.py", line 4, in test\n test2()\n File "./mymodule.py", line 3, in test2\n print(spam)\n NameError: spam\n >>> pdb.pm()\n > ./mymodule.py(3)test2()\n -> print(spam)\n (Pdb)\n\nThe module defines the following functions; each enters the debugger\nin a slightly different way:\n\npdb.run(statement, globals=None, locals=None)\n\n Execute the *statement* (given as a string or a code object) under\n debugger control. The debugger prompt appears before any code is\n executed; you can set breakpoints and type "continue", or you can\n step through the statement using "step" or "next" (all these\n commands are explained below). The optional *globals* and *locals*\n arguments specify the environment in which the code is executed; by\n default the dictionary of the module "__main__" is used. (See the\n explanation of the built-in "exec()" or "eval()" functions.)\n\npdb.runeval(expression, globals=None, locals=None)\n\n Evaluate the *expression* (given as a string or a code object)\n under debugger control. When "runeval()" returns, it returns the\n value of the expression. Otherwise this function is similar to\n"run()".\n\npdb.runcall(function, *args, **kwds)\n\n Call the *function* (a function or method object, not a string)\n with the given arguments. When "runcall()" returns, it returns\n whatever the function call returned. The debugger prompt appears\n as soon as the function is entered.\n\npdb.set_trace()\n\n Enter the debugger at the calling stack frame. This is useful to\n hard-code a breakpoint at a given point in a program, e
'del':u'\nThe "del" statement\n*******************\n\n del_stmt ::= "del" target_list\n\nDeletion is recursively defined very similar to the way assignment is\ndefined. Rather than spelling it out in full details, here are some\nhints.\n\nDeletion of a target list recursively deletes each target, from left\nto right.\n\nDeletion of a name removes the binding of that name from the local or\nglobal namespace, depending on whether the name occurs in a "global"\nstatement in the same code block. If the name is unbound, a\n"NameError" exception will be raised.\n\nDeletion of attribute references, subscriptions and slicings is passed\nto the primary object involved; deletion of a slicing is in general\nequivalent to assignment of an empty slice of the right type (but even\nthis is determined by the sliced object).\n\nChanged in version 3.2: Previously it was illegal to delete a name\nfrom the local namespace if it occurs as a free variable in a nested\nblock.\n',
'dict':u'\nDictionary displays\n*******************\n\nA dictionary display is a possibly empty series of key/datum pairs\nenclosed in curly braces:\n\n dict_display ::= "{" [key_datum_list | dict_comprehension] "}"\n key_datum_list ::= key_datum ("," key_datum)* [","]\n key_datum ::= expression ":" expression\n dict_comprehension ::= expression ":" expression comp_for\n\nA dictionary display yields a new dictionary object.\n\nIf a comma-separated sequence of key/datum pairs is given, they are\nevaluated from left to right to define the entries of the dictionary:\neach key object is used as a key into the dictionary to store the\ncorresponding datum. This means that you can specify the same key\nmultiple times in the key/datum list, and the final dictionary\'s value\nfor that key will be the last one given.\n\nA dict comprehension, in contrast to list and set comprehensions,\nneeds two expressions separated with a colon followed by the usual\n"for" and "if" clauses. When the comprehension is run, the resulting\nkey and value elements are inserted in the new dictionary in the order\nthey are produced.\n\nRestrictions on the types of the key values are listed earlier in\nsection *The standard type hierarchy*. (To summarize, the key type\nshould be *hashable*, which excludes all mutable objects.) Clashes\nbetween duplicate keys are not detected; the last datum (textually\nrightmost in the display) stored for a given key value prevails.\n',
'dynamic-features':u'\nInteraction with dynamic features\n*********************************\n\nThere are several cases where Python statements are illegal when used\nin conjunction with nested scopes that contain free variables.\n\nIf a variable is referenced in an enclosing scope, it is illegal to\ndelete the name. An error will be reported at compile time.\n\nIf the wild card form of import --- "import *" --- is used in a\nfunction and the function contains or is a nested block with free\nvariables, the compiler will raise a "SyntaxError".\n\nThe "eval()" and "exec()" functions do not have access to the full\nenvironment for resolving names. Names may be resolved in the local\nand global namespaces of the caller. Free variables are not resolved\nin the nearest enclosing namespace, but in the global namespace. [1]\nThe "exec()" and "eval()" functions have optional arguments to\noverride the global and local namespace. If only one namespace is\nspecified, it is used for both.\n',
'else':u'\nThe "if" statement\n******************\n\nThe "if" statement is used for conditional execution:\n\n if_stmt ::= "if" expression ":" suite\n ( "elif" expression ":" suite )*\n ["else"":" suite]\n\nIt selects exactly one of the suites by evaluating the expressions one\nby one until one is found to be true (see section *Boolean operations*\nfor the definition of true and false); then that suite is executed\n(and no other part of the "if" statement is executed or evaluated).\nIf all expressions are false, the suite of the "else" clause, if\npresent, is executed.\n',
'exceptions':u'\nExceptions\n**********\n\nExceptions are a means of breaking out of the normal flow of control\nof a code block in order to handle errors or other exceptional\nconditions. An exception is *raised* at the point where the error is\ndetected; it may be *handled* by the surrounding code block or by any\ncode block that directly or indirectly invoked the code block where\nthe error occurred.\n\nThe Python interpreter raises an exception when it detects a run-time\nerror (such as division by zero). A Python program can also\nexplicitly raise an exception with the "raise" statement. Exception\nhandlers are specified with the "try" ... "except" statement. The\n"finally" clause of such a statement can be used to specify cleanup\ncode which does not handle the exception, but is executed whether an\nexception occurred or not in the preceding code.\n\nPython uses the "termination" model of error handling: an exception\nhandler can find out what happened and continue execution at an outer\nlevel, but it cannot repair the cause of the error and retry the\nfailing operation (except by re-entering the offending piece of code\nfrom the top).\n\nWhen an exception is not handled at all, the interpreter terminates\nexecution of the program, or returns to its interactive main loop. In\neither case, it prints a stack backtrace, except when the exception is\n"SystemExit".\n\nExceptions are identified by class instances. The "except" clause is\nselected depending on the class of the instance: it must reference the\nclass of the instance or a base class thereof. The instance can be\nreceived by the handler and can carry additional information about the\nexceptional condition.\n\nNote: Exception messages are not part of the Python API. Their\n contents may change from one version of Python to the next without\n warning and should not be relied on by code which will run under\n multiple versions of the interpreter.\n\nSee also the description of the "try" statement in section *The try\nstatement* and "raise" statement in section *The raise statement*.\n\n-[ Footnotes ]-\n\n[1] This limitation occurs because the code that is executed by\n these operations is not available at the time the module is\n compiled.\n',
'execmodel':u'\nExecution model\n***************\n\n\nNaming and binding\n==================\n\n*Names* refer to objects. Names are introduced by name binding\noperations. Each occurrence of a name in the program text refers to\nthe *binding* of that name established in the innermost function block\ncontaining the use.\n\nA *block* is a piece of Python program text that is executed as a\nunit. The following are blocks: a module, a function body, and a class\ndefinition. Each command typed interactively is a block. A script\nfile (a file given as standard input to the interpreter or specified\nas a command line argument to the interpreter) is a code block. A\nscript command (a command specified on the interpreter command line\nwith the \'**-c**\' option) is a code block. The string argument passed\nto the built-in functions "eval()" and "exec()" is a code block.\n\nA code block is executed in an *execution frame*. A frame contains\nsome administrative information (used for debugging) and determines\nwhere and how execution continues after the code block\'s execution has\ncompleted.\n\nA *scope* defines the visibility of a name within a block. If a local\nvariable is defined in a block, its scope includes that block. If the\ndefinition occurs in a function block, the scope extends to any blocks\ncontained within the defining one, unless a contained block introduces\na different binding for the name. The scope of names defined in a\nclass block is limited to the class block; it does not extend to the\ncode blocks of methods -- this includes comprehensions and generator\nexpressions since they are implemented using a function scope. This\nmeans that the following will fail:\n\n class A:\n a = 42\n b = list(a + i for i in range(10))\n\nWhen a name is used in a code block, it is resolved using the nearest\nenclosing scope. The set of all such scopes visible to a code block\nis called the block\'s *environment*.\n\nIf a name is bound in a block, it is a local variable of that block,\nunless declared as "nonlocal". If a name is bound at the module\nlevel, it is a global variable. (The variables of the module code\nblock are local and global.) If a variable is used in a code block\nbut not defined there, it is a *free variable*.\n\nWhen a name is not found at all, a "NameError" exception is raised.\nIf the name refers to a local variable that has not been bound, an\n"UnboundLocalError" exception is raised. "UnboundLocalError" is a\nsubclass of "NameError".\n\nThe following constructs bind names: formal parameters to functions,\n"import" statements, class and function definitions (these bind the\nclass or function name in the defining block), and targets that are\nidentifiers if occurring in an assignment, "for" loop header, or after\n"as" in a "with" statement or "except" clause. The "import" statement\nof the form "from ... import *" binds all names defined in the\nimported module, except those beginning with an underscore. This form\nmay only be used at the module level.\n\nA target occurring in a "del" statement is also considered bound for\nthis purpose (though the actual semantics are to unbind the name).\n\nEach assignment or import statement occurs within a block defined by a\nclass or function definition or at the module level (the top-level\ncode block).\n\nIf a name binding operation occurs anywhere within a code block, all\nuses of the name within the block are treated as references to the\ncurrent block. This can lead to errors when a name is used within a\nblock before it is bound. This rule is subtle. Python lacks\ndeclarations and allows name binding operations to occur anywhere\nwithin a code block. The local variables of a code block can be\ndetermined by scanning the entire text of the block for name binding\noperations.\n\nIf the "global" statement occurs within a block, all uses of the name\nspecified in the statement refer to the binding of that name in the\ntop-level namespace. Names are resolved in the top-level namespace by\nsearching the global namespace, i.e. the name
'exprlists':u'\nExpression lists\n****************\n\n expression_list ::= expression ( "," expression )* [","]\n\nAn expression list containing at least one comma yields a tuple. The\nlength of the tuple is the number of expressions in the list. The\nexpressions are evaluated from left to right.\n\nThe trailing comma is required only to create a single tuple (a.k.a. a\n*singleton*); it is optional in all other cases. A single expression\nwithout a trailing comma doesn\'t create a tuple, but rather yields the\nvalue of that expression. (To create an empty tuple, use an empty pair\nof parentheses: "()".)\n',
'floating':u'\nFloating point literals\n***********************\n\nFloating point literals are described by the following lexical\ndefinitions:\n\n floatnumber ::= pointfloat | exponentfloat\n pointfloat ::= [intpart] fraction | intpart "."\n exponentfloat ::= (intpart | pointfloat) exponent\n intpart ::= digit+\n fraction ::= "." digit+\n exponent ::= ("e" | "E") ["+" | "-"] digit+\n\nNote that the integer and exponent parts are always interpreted using\nradix 10. For example, "077e010" is legal, and denotes the same number\nas "77e10". The allowed range of floating point literals is\nimplementation-dependent. Some examples of floating point literals:\n\n 3.14 10. .001 1e100 3.14e-10 0e0\n\nNote that numeric literals do not include a sign; a phrase like "-1"\nis actually an expression composed of the unary operator "-" and the\nliteral "1".\n',
'for':u'\nThe "for" statement\n*******************\n\nThe "for" statement is used to iterate over the elements of a sequence\n(such as a string, tuple or list) or other iterable object:\n\n for_stmt ::= "for" target_list "in" expression_list ":" suite\n ["else"":" suite]\n\nThe expression list is evaluated once; it should yield an iterable\nobject. An iterator is created for the result of the\n"expression_list". The suite is then executed once for each item\nprovided by the iterator, in the order returned by the iterator. Each\nitem in turn is assigned to the target list using the standard rules\nfor assignments (see *Assignment statements*), and then the suite is\nexecuted. When the items are exhausted (which is immediately when the\nsequence is empty or an iterator raises a "StopIteration" exception),\nthe suite in the "else" clause, if present, is executed, and the loop\nterminates.\n\nA "break" statement executed in the first suite terminates the loop\nwithout executing the "else" clause\'s suite. A "continue" statement\nexecuted in the first suite skips the rest of the suite and continues\nwith the next item, or with the "else" clause if there is no next\nitem.\n\nThe for-loop makes assignments to the variables(s) in the target list.\nThis overwrites all previous assignments to those variables including\nthose made in the suite of the for-loop:\n\n for i in range(10):\n print(i)\n i = 5 # this will not affect the for-loop\n # because i will be overwritten with the next\n # index in the range\n\nNames in the target list are not deleted when the loop is finished,\nbut if the sequence is empty, they will not have been assigned to at\nall by the loop. Hint: the built-in function "range()" returns an\niterator of integers suitable to emulate the effect of Pascal\'s "for i\n:= a to b do"; e.g., "list(range(3))" returns the list "[0, 1, 2]".\n\nNote: There is a subtlety when the sequence is being modified by the\n loop (this can only occur for mutable sequences, i.e. lists). An\n internal counter is used to keep track of which item is used next,\n and this is incremented on each iteration. When this counter has\n reached the length of the sequence the loop terminates. This means\n that if the suite deletes the current (or a previous) item from the\n sequence, the next item will be skipped (since it gets the index of\n the current item which has already been treated). Likewise, if the\n suite inserts an item in the sequence before the current item, the\n current item will be treated again the next time through the loop.\n This can lead to nasty bugs that can be avoided by making a\n temporary copy using a slice of the whole sequence, e.g.,\n\n for x in a[:]:\n if x < 0: a.remove(x)\n',
'formatstrings':u'\nFormat String Syntax\n********************\n\nThe "str.format()" method and the "Formatter" class share the same\nsyntax for format strings (although in the case of "Formatter",\nsubclasses can define their own format string syntax).\n\nFormat strings contain "replacement fields" surrounded by curly braces\n"{}". Anything that is not contained in braces is considered literal\ntext, which is copied unchanged to the output. If you need to include\na brace character in the literal text, it can be escaped by doubling:\n"{{" and "}}".\n\nThe grammar for a replacement field is as follows:\n\n replacement_field ::= "{" [field_name] ["!" conversion] [":" format_spec] "}"\n field_name ::= arg_name ("." attribute_name | "[" element_index "]")*\n arg_name ::= [identifier | integer]\n attribute_name ::= identifier\n element_index ::= integer | index_string\n index_string ::= <any source character except "]"> +\n conversion ::= "r" | "s" | "a"\n format_spec ::= <described in the next section>\n\nIn less formal terms, the replacement field can start with a\n*field_name* that specifies the object whose value is to be formatted\nand inserted into the output instead of the replacement field. The\n*field_name* is optionally followed by a *conversion* field, which is\npreceded by an exclamation point "\'!\'", and a *format_spec*, which is\npreceded by a colon "\':\'". These specify a non-default format for the\nreplacement value.\n\nSee also the *Format Specification Mini-Language* section.\n\nThe *field_name* itself begins with an *arg_name* that is either a\nnumber or a keyword. If it\'s a number, it refers to a positional\nargument, and if it\'s a keyword, it refers to a named keyword\nargument. If the numerical arg_names in a format string are 0, 1, 2,\n... in sequence, they can all be omitted (not just some) and the\nnumbers 0, 1, 2, ... will be automatically inserted in that order.\nBecause *arg_name* is not quote-delimited, it is not possible to\nspecify arbitrary dictionary keys (e.g., the strings "\'10\'" or\n"\':-]\'") within a format string. The *arg_name* can be followed by any\nnumber of index or attribute expressions. An expression of the form\n"\'.name\'" selects the named attribute using "getattr()", while an\nexpression of the form "\'[index]\'" does an index lookup using\n"__getitem__()".\n\nChanged in version 3.1: The positional argument specifiers can be\nomitted, so "\'{}{}\'" is equivalent to "\'{0}{1}\'".\n\nSome simple format string examples:\n\n"First, thou shalt count to {0}" # References first positional argument\n"Bring me a {}" # Implicitly references the first positional argument\n"From {} to {}" # Same as "From {0} to {1}"\n"My quest is {name}" # References keyword argument \'name\'\n"Weight in tons {0.weight}" # \'weight\' attribute of first positional arg\n"Units destroyed: {players[0]}" # First element of keyword argument \'players\'.\n\nThe *conversion* field causes a type coercion before formatting.\nNormally, the job of formatting a value is done by the "__format__()"\nmethod of the value itself. However, in some cases it is desirable to\nforce a type to be formatted as a string, overriding its own\ndefinition of formatting. By converting the value to a string before\ncalling "__format__()", the normal formatting logic is bypassed.\n\nThree conversion flags are currently supported: "\'!s\'" which calls\n"str()" on the value, "\'!r\'" which calls "repr()" and "\'!a\'" which\ncalls "ascii()".\n\nSome examples:\n\n"Harold\'s a clever {0!s}" # Calls str() on the argument first\n"Bring out the holy {name!r}" # Calls repr() on the argument first\n"More {!a}" # Calls ascii() on the argument first\n\nThe *format_spec* field contains a specification of how the value\nshould be presented, including such details as field width, alignment,\npadding, decimal precision and so on. Each value type c
'function':u'\nFunction definitions\n********************\n\nA function definition defines a user-defined function object (see\nsection *The standard type hierarchy*):\n\n funcdef ::= [decorators] "def" funcname "(" [parameter_list] ")" ["->" expression] ":" suite\n decorators ::= decorator+\n decorator ::= "@" dotted_name ["(" [parameter_list [","]] ")"] NEWLINE\n dotted_name ::= identifier ("." identifier)*\n parameter_list ::= (defparameter ",")*\n | "*" [parameter] ("," defparameter)* [",""**" parameter]\n | "**" parameter\n | defparameter [","] )\n parameter ::= identifier [":" expression]\n defparameter ::= parameter ["=" expression]\n funcname ::= identifier\n\nA function definition is an executable statement. Its execution binds\nthe function name in the current local namespace to a function object\n(a wrapper around the executable code for the function). This\nfunction object contains a reference to the current global namespace\nas the global namespace to be used when the function is called.\n\nThe function definition does not execute the function body; this gets\nexecuted only when the function is called. [3]\n\nA function definition may be wrapped by one or more *decorator*\nexpressions. Decorator expressions are evaluated when the function is\ndefined, in the scope that contains the function definition. The\nresult must be a callable, which is invoked with the function object\nas the only argument. The returned value is bound to the function name\ninstead of the function object. Multiple decorators are applied in\nnested fashion. For example, the following code\n\n @f1(arg)\n @f2\n def func(): pass\n\nis equivalent to\n\n def func(): pass\n func = f1(arg)(f2(func))\n\nWhen one or more *parameters* have the form *parameter* "="\n*expression*, the function is said to have "default parameter values."\nFor a parameter with a default value, the corresponding *argument* may\nbe omitted from a call, in which case the parameter\'s default value is\nsubstituted. If a parameter has a default value, all following\nparameters up until the ""*"" must also have a default value --- this\nis a syntactic restriction that is not expressed by the grammar.\n\n**Default parameter values are evaluated from left to right when the\nfunction definition is executed.** This means that the expression is\nevaluated once, when the function is defined, and that the same "pre-\ncomputed" value is used for each call. This is especially important\nto understand when a default parameter is a mutable object, such as a\nlist or a dictionary: if the function modifies the object (e.g. by\nappending an item to a list), the default value is in effect modified.\nThis is generally not what was intended. A way around this is to use\n"None" as the default, and explicitly test for it in the body of the\nfunction, e.g.:\n\n def whats_on_the_telly(penguin=None):\n if penguin is None:\n penguin = []\n penguin.append("property of the zoo")\n return penguin\n\nFunction call semantics are described in more detail in section\n*Calls*. A function call always assigns values to all parameters\nmentioned in the parameter list, either from position arguments, from\nkeyword arguments, or from default values. If the form\n""*identifier"" is present, it is initialized to a tuple receiving any\nexcess positional parameters, defaulting to the empty tuple. If the\nform ""**identifier"" is present, it is initialized to a new\ndictionary receiving any excess keyword arguments, defaulting to a new\nempty dictionary. Parameters after ""*"" or ""*identifier"" are\nkeyword-only parameters and may only be passed used keyword arguments.\n\nParameters may have annotations of the form "": expression"" following\nthe parameter name. Any parameter may have an annotation even those\nof the form "*identifier" or "**identifier". Functions may have\n"return" annotation of the form ""-> expression"" after the parameter\nlist.
'global':u'\nThe "global" statement\n**********************\n\n global_stmt ::= "global" identifier ("," identifier)*\n\nThe "global" statement is a declaration which holds for the entire\ncurrent code block. It means that the listed identifiers are to be\ninterpreted as globals. It would be impossible to assign to a global\nvariable without "global", although free variables may refer to\nglobals without being declared global.\n\nNames listed in a "global" statement must not be used in the same code\nblock textually preceding that "global" statement.\n\nNames listed in a "global" statement must not be defined as formal\nparameters or in a "for" loop control target, "class" definition,\nfunction definition, or "import" statement.\n\n**CPython implementation detail:** The current implementation does not\nenforce the two restrictions, but programs should not abuse this\nfreedom, as future implementations may enforce them or silently change\nthe meaning of the program.\n\n**Programmer\'s note:** the "global" is a directive to the parser. It\napplies only to code parsed at the same time as the "global"\nstatement. In particular, a "global" statement contained in a string\nor code object supplied to the built-in "exec()" function does not\naffect the code block *containing* the function call, and code\ncontained in such a string is unaffected by "global" statements in the\ncode containing the function call. The same applies to the "eval()"\nand "compile()" functions.\n',
'id-classes':u'\nReserved classes of identifiers\n*******************************\n\nCertain classes of identifiers (besides keywords) have special\nmeanings. These classes are identified by the patterns of leading and\ntrailing underscore characters:\n\n"_*"\n Not imported by "from module import *". The special identifier "_"\n is used in the interactive interpreter to store the result of the\n last evaluation; it is stored in the "builtins" module. When not\n in interactive mode, "_" has no special meaning and is not defined.\n See section *The import statement*.\n\n Note: The name "_" is often used in conjunction with\n internationalization; refer to the documentation for the\n"gettext" module for more information on this convention.\n\n"__*__"\n System-defined names. These names are defined by the interpreter\n and its implementation (including the standard library). Current\n system names are discussed in the *Special method names* section\n and elsewhere. More will likely be defined in future versions of\n Python. *Any* use of "__*__" names, in any context, that does not\n follow explicitly documented use, is subject to breakage without\n warning.\n\n"__*"\n Class-private names. Names in this category, when used within the\n context of a class definition, are re-written to use a mangled form\n to help avoid name clashes between "private" attributes of base and\n derived classes. See section *Identifiers (Names)*.\n',
'identifiers':u'\nIdentifiers and keywords\n************************\n\nIdentifiers (also referred to as *names*) are described by the\nfollowing lexical definitions.\n\nThe syntax of identifiers in Python is based on the Unicode standard\nannex UAX-31, with elaboration and changes as defined below; see also\n**PEP 3131** for further details.\n\nWithin the ASCII range (U+0001..U+007F), the valid characters for\nidentifiers are the same as in Python 2.x: the uppercase and lowercase\nletters "A" through "Z", the underscore "_" and, except for the first\ncharacter, the digits "0" through "9".\n\nPython 3.0 introduces additional characters from outside the ASCII\nrange (see **PEP 3131**). For these characters, the classification\nuses the version of the Unicode Character Database as included in the\n"unicodedata" module.\n\nIdentifiers are unlimited in length. Case is significant.\n\n identifier ::= xid_start xid_continue*\n id_start ::= <all characters in general categories Lu, Ll, Lt, Lm, Lo, Nl, the underscore, and characters with the Other_ID_Start property>\n id_continue ::= <all characters in id_start, plus characters in the categories Mn, Mc, Nd, Pc and others with the Other_ID_Continue property>\n xid_start ::= <all characters in id_start whose NFKC normalization is in "id_start xid_continue*">\n xid_continue ::= <all characters in id_continue whose NFKC normalization is in "id_continue*">\n\nThe Unicode category codes mentioned above stand for:\n\n* *Lu* - uppercase letters\n\n* *Ll* - lowercase letters\n\n* *Lt* - titlecase letters\n\n* *Lm* - modifier letters\n\n* *Lo* - other letters\n\n* *Nl* - letter numbers\n\n* *Mn* - nonspacing marks\n\n* *Mc* - spacing combining marks\n\n* *Nd* - decimal numbers\n\n* *Pc* - connector punctuations\n\n* *Other_ID_Start* - explicit list of characters in PropList.txt to\n support backwards compatibility\n\n* *Other_ID_Continue* - likewise\n\nAll identifiers are converted into the normal form NFKC while parsing;\ncomparison of identifiers is based on NFKC.\n\nA non-normative HTML file listing all valid identifier characters for\nUnicode 4.1 can be found at http://www.dcl.hpi.uni-\npotsdam.de/home/loewis/table-3131.html.\n\n\nKeywords\n========\n\nThe following identifiers are used as reserved words, or *keywords* of\nthe language, and cannot be used as ordinary identifiers. They must\nbe spelled exactly as written here:\n\n False class finally is return\n None continue for lambda try\n True def from nonlocal while\n and del global not with\n as elif if or yield\n assert else import pass\n break except in raise\n\n\nReserved classes of identifiers\n===============================\n\nCertain classes of identifiers (besides keywords) have special\nmeanings. These classes are identified by the patterns of leading and\ntrailing underscore characters:\n\n"_*"\n Not imported by "from module import *". The special identifier "_"\n is used in the interactive interpreter to store the result of the\n last evaluation; it is stored in the "builtins" module. When not\n in interactive mode, "_" has no special meaning and is not defined.\n See section *The import statement*.\n\n Note: The name "_" is often used in conjunction with\n internationalization; refer to the documentation for the\n"gettext" module for more information on this convention.\n\n"__*__"\n System-defined names. These names are defined by the interpreter\n and its implementation (including the standard library). Current\n system names are discussed in the *Special method names* section\n and elsewhere. More will likely be defined in future versions of\n Python. *Any* use of "__*__" names, in any context, that does not\n follow explicitly documented use, is subject to breakage without\n warning.\n\n"__*"\n Class-private names. Names in this category, when used within the\n context of a class defin
'if':u'\nThe "if" statement\n******************\n\nThe "if" statement is used for conditional execution:\n\n if_stmt ::= "if" expression ":" suite\n ( "elif" expression ":" suite )*\n ["else"":" suite]\n\nIt selects exactly one of the suites by evaluating the expressions one\nby one until one is found to be true (see section *Boolean operations*\nfor the definition of true and false); then that suite is executed\n(and no other part of the "if" statement is executed or evaluated).\nIf all expressions are false, the suite of the "else" clause, if\npresent, is executed.\n',
'imaginary':u'\nImaginary literals\n******************\n\nImaginary literals are described by the following lexical definitions:\n\n imagnumber ::= (floatnumber | intpart) ("j" | "J")\n\nAn imaginary literal yields a complex number with a real part of 0.0.\nComplex numbers are represented as a pair of floating point numbers\nand have the same restrictions on their range. To create a complex\nnumber with a nonzero real part, add a floating point number to it,\ne.g., "(3+4j)". Some examples of imaginary literals:\n\n 3.14j 10.j 10j .001j 1e100j 3.14e-10j\n',
'import':u'\nThe "import" statement\n**********************\n\n import_stmt ::= "import" module ["as" name] ( "," module ["as" name] )*\n | "from" relative_module "import" identifier ["as" name]\n ( "," identifier ["as" name] )*\n | "from" relative_module "import""(" identifier ["as" name]\n ( "," identifier ["as" name] )* [","] ")"\n | "from" module "import""*"\n module ::= (identifier ".")* identifier\n relative_module ::= "."* module | "."+\n name ::= identifier\n\nThe basic import statement (no "from" clause) is executed in two\nsteps:\n\n1. find a module, loading and initializing it if necessary\n\n2. define a name or names in the local namespace for the scope\n where the "import" statement occurs.\n\nWhen the statement contains multiple clauses (separated by commas) the\ntwo steps are carried out separately for each clause, just as though\nthe clauses had been separated out into individiual import statements.\n\nThe details of the first step, finding and loading modules are\ndescribed in greater detail in the section on the *import system*,\nwhich also describes the various types of packages and modules that\ncan be imported, as well as all the hooks that can be used to\ncustomize the import system. Note that failures in this step may\nindicate either that the module could not be located, *or* that an\nerror occurred while initializing the module, which includes execution\nof the module\'s code.\n\nIf the requested module is retrieved successfully, it will be made\navailable in the local namespace in one of three ways:\n\n* If the module name is followed by "as", then the name following\n"as" is bound directly to the imported module.\n\n* If no other name is specified, and the module being imported is a\n top level module, the module\'s name is bound in the local namespace\n as a reference to the imported module\n\n* If the module being imported is *not* a top level module, then the\n name of the top level package that contains the module is bound in\n the local namespace as a reference to the top level package. The\n imported module must be accessed using its full qualified name\n rather than directly\n\nThe "from" form uses a slightly more complex process:\n\n1. find the module specified in the "from" clause, loading and\n initializing it if necessary;\n\n2. for each of the identifiers specified in the "import" clauses:\n\n 1. check if the imported module has an attribute by that name\n\n 2. if not, attempt to import a submodule with that name and then\n check the imported module again for that attribute\n\n 3. if the attribute is not found, "ImportError" is raised.\n\n 4. otherwise, a reference to that value is stored in the local\n namespace, using the name in the "as" clause if it is present,\n otherwise using the attribute name\n\nExamples:\n\n import foo # foo imported and bound locally\n import foo.bar.baz # foo.bar.baz imported, foo bound locally\n import foo.bar.baz as fbb # foo.bar.baz imported and bound as fbb\n from foo.bar import baz # foo.bar.baz imported and bound as baz\n from foo import attr # foo imported and foo.attr bound as attr\n\nIf the list of identifiers is replaced by a star ("\'*\'"), all public\nnames defined in the module are bound in the local namespace for the\nscope where the "import" statement occurs.\n\nThe *public names* defined by a module are determined by checking the\nmodule\'s namespace for a variable named "__all__"; if defined, it must\nbe a sequence of strings which are names defined or imported by that\nmodule. The names given in "__all__" are all considered public and\nare required to exist. If "__all__" is not defined, the set of public\nnames includes all names found in the module\'s namespace which do not\nbegin with an underscore character ("\'_\'"). "__all__" should contain\nthe entire public API. It is intended to avoid accidentally exporting\nitems that are
'in':u'\nComparisons\n***********\n\nUnlike C, all comparison operations in Python have the same priority,\nwhich is lower than that of any arithmetic, shifting or bitwise\noperation. Also unlike C, expressions like "a < b < c" have the\ninterpretation that is conventional in mathematics:\n\n comparison ::= or_expr ( comp_operator or_expr )*\n comp_operator ::= "<" | ">" | "==" | ">=" | "<=" | "!="\n | "is" ["not"] | ["not"] "in"\n\nComparisons yield boolean values: "True" or "False".\n\nComparisons can be chained arbitrarily, e.g., "x < y <= z" is\nequivalent to "x < y and y <= z", except that "y" is evaluated only\nonce (but in both cases "z" is not evaluated at all when "x < y" is\nfound to be false).\n\nFormally, if *a*, *b*, *c*, ..., *y*, *z* are expressions and *op1*,\n*op2*, ..., *opN* are comparison operators, then "a op1 b op2 c ... y\nopN z" is equivalent to "a op1 b and b op2 c and ... y opN z", except\nthat each expression is evaluated at most once.\n\nNote that "a op1 b op2 c" doesn\'t imply any kind of comparison between\n*a* and *c*, so that, e.g., "x < y > z" is perfectly legal (though\nperhaps not pretty).\n\nThe operators "<", ">", "==", ">=", "<=", and "!=" compare the values\nof two objects. The objects need not have the same type. If both are\nnumbers, they are converted to a common type. Otherwise, the "==" and\n"!=" operators *always* consider objects of different types to be\nunequal, while the "<", ">", ">=" and "<=" operators raise a\n"TypeError" when comparing objects of different types that do not\nimplement these operators for the given pair of types. You can\ncontrol comparison behavior of objects of non-built-in types by\ndefining rich comparison methods like "__gt__()", described in section\n*Basic customization*.\n\nComparison of objects of the same type depends on the type:\n\n* Numbers are compared arithmetically.\n\n* The values "float(\'NaN\')" and "Decimal(\'NaN\')" are special. They\n are identical to themselves, "x is x" but are not equal to\n themselves, "x != x". Additionally, comparing any value to a\n not-a-number value will return "False". For example, both "3 <\n float(\'NaN\')" and "float(\'NaN\') < 3" will return "False".\n\n* Bytes objects are compared lexicographically using the numeric\n values of their elements.\n\n* Strings are compared lexicographically using the numeric\n equivalents (the result of the built-in function "ord()") of their\n characters. [3] String and bytes object can\'t be compared!\n\n* Tuples and lists are compared lexicographically using comparison\n of corresponding elements. This means that to compare equal, each\n element must compare equal and the two sequences must be of the same\n type and have the same length.\n\n If not equal, the sequences are ordered the same as their first\n differing elements. For example, "[1,2,x] <= [1,2,y]" has the same\n value as "x <= y". If the corresponding element does not exist, the\n shorter sequence is ordered first (for example, "[1,2] < [1,2,3]").\n\n* Mappings (dictionaries) compare equal if and only if they have the\n same "(key, value)" pairs. Order comparisons "(\'<\', \'<=\', \'>=\',\n\'>\')" raise "TypeError".\n\n* Sets and frozensets define comparison operators to mean subset and\n superset tests. Those relations do not define total orderings (the\n two sets "{1,2}" and {2,3} are not equal, nor subsets of one\n another, nor supersets of one another). Accordingly, sets are not\n appropriate arguments for functions which depend on total ordering.\n For example, "min()", "max()", and "sorted()" produce undefined\n results given a list of sets as inputs.\n\n* Most other objects of built-in types compare unequal unless they\n are the same object; the choice whether one object is considered\n smaller or larger than another one is made arbitrarily but\n consistently within one execution of a program.\n\nComparison of objects of differing types depends on whether either of\nthe types provide explicit support for the comparison. Most numeric
'integers':u'\nInteger literals\n****************\n\nInteger literals are described by the following lexical definitions:\n\n integer ::= decimalinteger | octinteger | hexinteger | bininteger\n decimalinteger ::= nonzerodigit digit* | "0"+\n nonzerodigit ::= "1"..."9"\n digit ::= "0"..."9"\n octinteger ::= "0" ("o" | "O") octdigit+\n hexinteger ::= "0" ("x" | "X") hexdigit+\n bininteger ::= "0" ("b" | "B") bindigit+\n octdigit ::= "0"..."7"\n hexdigit ::= digit | "a"..."f" | "A"..."F"\n bindigit ::= "0" | "1"\n\nThere is no limit for the length of integer literals apart from what\ncan be stored in available memory.\n\nNote that leading zeros in a non-zero decimal number are not allowed.\nThis is for disambiguation with C-style octal literals, which Python\nused before version 3.0.\n\nSome examples of integer literals:\n\n 7 2147483647 0o177 0b100110111\n 3 79228162514264337593543950336 0o377 0x100000000\n 79228162514264337593543950336 0xdeadbeef\n',
'lambda':u'\nLambdas\n*******\n\n lambda_expr ::= "lambda" [parameter_list]: expression\n lambda_expr_nocond ::= "lambda" [parameter_list]: expression_nocond\n\nLambda expressions (sometimes called lambda forms) are used to create\nanonymous functions. The expression "lambda arguments: expression"\nyields a function object. The unnamed object behaves like a function\nobject defined with\n\n def <lambda>(arguments):\n return expression\n\nSee section *Function definitions* for the syntax of parameter lists.\nNote that functions created with lambda expressions cannot contain\nstatements or annotations.\n',
'lists':u'\nList displays\n*************\n\nA list display is a possibly empty series of expressions enclosed in\nsquare brackets:\n\n list_display ::= "[" [expression_list | comprehension] "]"\n\nA list display yields a new list object, the contents being specified\nby either a list of expressions or a comprehension. When a comma-\nseparated list of expressions is supplied, its elements are evaluated\nfrom left to right and placed into the list object in that order.\nWhen a comprehension is supplied, the list is constructed from the\nelements resulting from the comprehension.\n',
'naming':u'\nNaming and binding\n******************\n\n*Names* refer to objects. Names are introduced by name binding\noperations. Each occurrence of a name in the program text refers to\nthe *binding* of that name established in the innermost function block\ncontaining the use.\n\nA *block* is a piece of Python program text that is executed as a\nunit. The following are blocks: a module, a function body, and a class\ndefinition. Each command typed interactively is a block. A script\nfile (a file given as standard input to the interpreter or specified\nas a command line argument to the interpreter) is a code block. A\nscript command (a command specified on the interpreter command line\nwith the \'**-c**\' option) is a code block. The string argument passed\nto the built-in functions "eval()" and "exec()" is a code block.\n\nA code block is executed in an *execution frame*. A frame contains\nsome administrative information (used for debugging) and determines\nwhere and how execution continues after the code block\'s execution has\ncompleted.\n\nA *scope* defines the visibility of a name within a block. If a local\nvariable is defined in a block, its scope includes that block. If the\ndefinition occurs in a function block, the scope extends to any blocks\ncontained within the defining one, unless a contained block introduces\na different binding for the name. The scope of names defined in a\nclass block is limited to the class block; it does not extend to the\ncode blocks of methods -- this includes comprehensions and generator\nexpressions since they are implemented using a function scope. This\nmeans that the following will fail:\n\n class A:\n a = 42\n b = list(a + i for i in range(10))\n\nWhen a name is used in a code block, it is resolved using the nearest\nenclosing scope. The set of all such scopes visible to a code block\nis called the block\'s *environment*.\n\nIf a name is bound in a block, it is a local variable of that block,\nunless declared as "nonlocal". If a name is bound at the module\nlevel, it is a global variable. (The variables of the module code\nblock are local and global.) If a variable is used in a code block\nbut not defined there, it is a *free variable*.\n\nWhen a name is not found at all, a "NameError" exception is raised.\nIf the name refers to a local variable that has not been bound, an\n"UnboundLocalError" exception is raised. "UnboundLocalError" is a\nsubclass of "NameError".\n\nThe following constructs bind names: formal parameters to functions,\n"import" statements, class and function definitions (these bind the\nclass or function name in the defining block), and targets that are\nidentifiers if occurring in an assignment, "for" loop header, or after\n"as" in a "with" statement or "except" clause. The "import" statement\nof the form "from ... import *" binds all names defined in the\nimported module, except those beginning with an underscore. This form\nmay only be used at the module level.\n\nA target occurring in a "del" statement is also considered bound for\nthis purpose (though the actual semantics are to unbind the name).\n\nEach assignment or import statement occurs within a block defined by a\nclass or function definition or at the module level (the top-level\ncode block).\n\nIf a name binding operation occurs anywhere within a code block, all\nuses of the name within the block are treated as references to the\ncurrent block. This can lead to errors when a name is used within a\nblock before it is bound. This rule is subtle. Python lacks\ndeclarations and allows name binding operations to occur anywhere\nwithin a code block. The local variables of a code block can be\ndetermined by scanning the entire text of the block for name binding\noperations.\n\nIf the "global" statement occurs within a block, all uses of the name\nspecified in the statement refer to the binding of that name in the\ntop-level namespace. Names are resolved in the top-level namespace by\nsearching the global namespace, i.e. the namespace of the module\ncontaining the code
'nonlocal':u'\nThe "nonlocal" statement\n************************\n\n nonlocal_stmt ::= "nonlocal" identifier ("," identifier)*\n\nThe "nonlocal" statement causes the listed identifiers to refer to\npreviously bound variables in the nearest enclosing scope excluding\nglobals. This is important because the default behavior for binding is\nto search the local namespace first. The statement allows\nencapsulated code to rebind variables outside of the local scope\nbesides the global (module) scope.\n\nNames listed in a "nonlocal" statement, unlike those listed in a\n"global" statement, must refer to pre-existing bindings in an\nenclosing scope (the scope in which a new binding should be created\ncannot be determined unambiguously).\n\nNames listed in a "nonlocal" statement must not collide with pre-\nexisting bindings in the local scope.\n\nSee also: **PEP 3104** - Access to Names in Outer Scopes\n\n The specification for the "nonlocal" statement.\n',
'numbers':u'\nNumeric literals\n****************\n\nThere are three types of numeric literals: integers, floating point\nnumbers, and imaginary numbers. There are no complex literals\n(complex numbers can be formed by adding a real number and an\nimaginary number).\n\nNote that numeric literals do not include a sign; a phrase like "-1"\nis actually an expression composed of the unary operator \'"-"\' and the\nliteral "1".\n',
'numeric-types':u'\nEmulating numeric types\n***********************\n\nThe following methods can be defined to emulate numeric objects.\nMethods corresponding to operations that are not supported by the\nparticular kind of number implemented (e.g., bitwise operations for\nnon-integral numbers) should be left undefined.\n\nobject.__add__(self, other)\nobject.__sub__(self, other)\nobject.__mul__(self, other)\nobject.__matmul__(self, other)\nobject.__truediv__(self, other)\nobject.__floordiv__(self, other)\nobject.__mod__(self, other)\nobject.__divmod__(self, other)\nobject.__pow__(self, other[, modulo])\nobject.__lshift__(self, other)\nobject.__rshift__(self, other)\nobject.__and__(self, other)\nobject.__xor__(self, other)\nobject.__or__(self, other)\n\n These methods are called to implement the binary arithmetic\n operations ("+", "-", "*", "@", "/", "//", "%", "divmod()",\n"pow()", "**", "<<", ">>", "&", "^", "|"). For instance, to\n evaluate the expression "x + y", where *x* is an instance of a\n class that has an "__add__()" method, "x.__add__(y)" is called.\n The "__divmod__()" method should be the equivalent to using\n"__floordiv__()" and "__mod__()"; it should not be related to\n"__truediv__()". Note that "__pow__()" should be defined to accept\n an optional third argument if the ternary version of the built-in\n"pow()" function is to be supported.\n\n If one of those methods does not support the operation with the\n supplied arguments, it should return "NotImplemented".\n\nobject.__radd__(self, other)\nobject.__rsub__(self, other)\nobject.__rmul__(self, other)\nobject.__rmatmul__(self, other)\nobject.__rtruediv__(self, other)\nobject.__rfloordiv__(self, other)\nobject.__rmod__(self, other)\nobject.__rdivmod__(self, other)\nobject.__rpow__(self, other)\nobject.__rlshift__(self, other)\nobject.__rrshift__(self, other)\nobject.__rand__(self, other)\nobject.__rxor__(self, other)\nobject.__ror__(self, other)\n\n These methods are called to implement the binary arithmetic\n operations ("+", "-", "*", "@", "/", "//", "%", "divmod()",\n"pow()", "**", "<<", ">>", "&", "^", "|") with reflected (swapped)\n operands. These functions are only called if the left operand does\n not support the corresponding operation and the operands are of\n different types. [2] For instance, to evaluate the expression "x -\n y", where *y* is an instance of a class that has an "__rsub__()"\n method, "y.__rsub__(x)" is called if "x.__sub__(y)" returns\n *NotImplemented*.\n\n Note that ternary "pow()" will not try calling "__rpow__()" (the\n coercion rules would become too complicated).\n\n Note: If the right operand\'s type is a subclass of the left\n operand\'s type and that subclass provides the reflected method\n for the operation, this method will be called before the left\n operand\'s non-reflected method. This behavior allows subclasses\n to override their ancestors\' operations.\n\nobject.__iadd__(self, other)\nobject.__isub__(self, other)\nobject.__imul__(self, other)\nobject.__imatmul__(self, other)\nobject.__itruediv__(self, other)\nobject.__ifloordiv__(self, other)\nobject.__imod__(self, other)\nobject.__ipow__(self, other[, modulo])\nobject.__ilshift__(self, other)\nobject.__irshift__(self, other)\nobject.__iand__(self, other)\nobject.__ixor__(self, other)\nobject.__ior__(self, other)\n\n These methods are called to implement the augmented arithmetic\n assignments ("+=", "-=", "*=", "@=", "/=", "//=", "%=", "**=",\n"<<=", ">>=", "&=", "^=", "|="). These methods should attempt to\n do the operation in-place (modifying *self*) and return the result\n (which could be, but does not have to be, *self*). If a specific\n method is not defined, the augmented assignment falls back to the\n normal methods. For instance, if *x* is an instance of a class\n with an "__iadd__()" method, "x += y" is equivalent to "x =\n x.__iadd__(y)" . Otherwise, "x.__add__(y)" and "y.__radd__(x)" are\n considered, as with the evaluation of "x + y". In certain\n s
'objects':u'\nObjects, values and types\n*************************\n\n*Objects* are Python\'s abstraction for data. All data in a Python\nprogram is represented by objects or by relations between objects. (In\na sense, and in conformance to Von Neumann\'s model of a "stored\nprogram computer," code is also represented by objects.)\n\nEvery object has an identity, a type and a value. An object\'s\n*identity* never changes once it has been created; you may think of it\nas the object\'s address in memory. The \'"is"\' operator compares the\nidentity of two objects; the "id()" function returns an integer\nrepresenting its identity.\n\n**CPython implementation detail:** For CPython, "id(x)" is the memory\naddress where "x" is stored.\n\nAn object\'s type determines the operations that the object supports\n(e.g., "does it have a length?") and also defines the possible values\nfor objects of that type. The "type()" function returns an object\'s\ntype (which is an object itself). Like its identity, an object\'s\n*type* is also unchangeable. [1]\n\nThe *value* of some objects can change. Objects whose value can\nchange are said to be *mutable*; objects whose value is unchangeable\nonce they are created are called *immutable*. (The value of an\nimmutable container object that contains a reference to a mutable\nobject can change when the latter\'s value is changed; however the\ncontainer is still considered immutable, because the collection of\nobjects it contains cannot be changed. So, immutability is not\nstrictly the same as having an unchangeable value, it is more subtle.)\nAn object\'s mutability is determined by its type; for instance,\nnumbers, strings and tuples are immutable, while dictionaries and\nlists are mutable.\n\nObjects are never explicitly destroyed; however, when they become\nunreachable they may be garbage-collected. An implementation is\nallowed to postpone garbage collection or omit it altogether --- it is\na matter of implementation quality how garbage collection is\nimplemented, as long as no objects are collected that are still\nreachable.\n\n**CPython implementation detail:** CPython currently uses a reference-\ncounting scheme with (optional) delayed detection of cyclically linked\ngarbage, which collects most objects as soon as they become\nunreachable, but is not guaranteed to collect garbage containing\ncircular references. See the documentation of the "gc" module for\ninformation on controlling the collection of cyclic garbage. Other\nimplementations act differently and CPython may change. Do not depend\non immediate finalization of objects when they become unreachable (so\nyou should always close files explicitly).\n\nNote that the use of the implementation\'s tracing or debugging\nfacilities may keep objects alive that would normally be collectable.\nAlso note that catching an exception with a \'"try"..."except"\'\nstatement may keep objects alive.\n\nSome objects contain references to "external" resources such as open\nfiles or windows. It is understood that these resources are freed\nwhen the object is garbage-collected, but since garbage collection is\nnot guaranteed to happen, such objects also provide an explicit way to\nrelease the external resource, usually a "close()" method. Programs\nare strongly recommended to explicitly close such objects. The\n\'"try"..."finally"\' statement and the \'"with"\' statement provide\nconvenient ways to do this.\n\nSome objects contain references to other objects; these are called\n*containers*. Examples of containers are tuples, lists and\ndictionaries. The references are part of a container\'s value. In\nmost cases, when we talk about the value of a container, we imply the\nvalues, not the identities of the contained objects; however, when we\ntalk about the mutability of a container, only the identities of the\nimmediately contained objects are implied. So, if an immutable\ncontainer (like a tuple) contains a reference to a mutable object, its\nvalue changes if that mutable object is changed.\n\nTypes affect almost all aspects of object b
'operator-summary':u'\nOperator precedence\n*******************\n\nThe following table summarizes the operator precedence in Python, from\nlowest precedence (least binding) to highest precedence (most\nbinding). Operators in the same box have the same precedence. Unless\nthe syntax is explicitly given, operators are binary. Operators in\nthe same box group left to right (except for exponentiation, which\ngroups from right to left).\n\nNote that comparisons, membership tests, and identity tests, all have\nthe same precedence and have a left-to-right chaining feature as\ndescribed in the *Comparisons* section.\n\n+-------------------------------------------------+---------------------------------------+\n| Operator | Description |\n+=================================================+=======================================+\n| "lambda" | Lambda expression |\n+-------------------------------------------------+---------------------------------------+\n| "if" -- "else" | Conditional expression |\n+-------------------------------------------------+---------------------------------------+\n| "or" | Boolean OR |\n+-------------------------------------------------+---------------------------------------+\n| "and" | Boolean AND |\n+-------------------------------------------------+---------------------------------------+\n| "not""x" | Boolean NOT |\n+-------------------------------------------------+---------------------------------------+\n| "in", "not in", "is", "is not", "<", "<=", ">", | Comparisons, including membership |\n| ">=", "!=", "==" | tests and identity tests |\n+-------------------------------------------------+---------------------------------------+\n| "|" | Bitwise OR |\n+-------------------------------------------------+---------------------------------------+\n| "^" | Bitwise XOR |\n+-------------------------------------------------+---------------------------------------+\n| "&" | Bitwise AND |\n+-------------------------------------------------+---------------------------------------+\n| "<<", ">>" | Shifts |\n+-------------------------------------------------+---------------------------------------+\n| "+", "-" | Addition and subtraction |\n+-------------------------------------------------+---------------------------------------+\n| "*", "@", "/", "//", "%" | Multiplication, matrix multiplication |\n| | division, remainder [5] |\n+-------------------------------------------------+---------------------------------------+\n| "+x", "-x", "~x" | Positive, negative, bitwise NOT |\n+-------------------------------------------------+---------------------------------------+\n| "**" | Exponentiation [6] |\n+-------------------------------------------------+---------------------------------------+\n| "x[index]", "x[index:index]", | Subscription, slicing, call, |\n| "x(arguments...)", "x.attribute" | attribute reference |\n+-------------------------------------------------+---------------------------------------+\n| "(expressions...)", "[expressions...]", "{key: | Binding or tuple display, list |\n| value...}", "{expressions...
'pass':u'\nThe "pass" statement\n********************\n\n pass_stmt ::= "pass"\n\n"pass" is a null operation --- when it is executed, nothing happens.\nIt is useful as a placeholder when a statement is required\nsyntactically, but no code needs to be executed, for example:\n\n def f(arg): pass # a function that does nothing (yet)\n\n class C: pass # a class with no methods (yet)\n',
'power':u'\nThe power operator\n******************\n\nThe power operator binds more tightly than unary operators on its\nleft; it binds less tightly than unary operators on its right. The\nsyntax is:\n\n power ::= primary ["**" u_expr]\n\nThus, in an unparenthesized sequence of power and unary operators, the\noperators are evaluated from right to left (this does not constrain\nthe evaluation order for the operands): "-1**2" results in "-1".\n\nThe power operator has the same semantics as the built-in "pow()"\nfunction, when called with two arguments: it yields its left argument\nraised to the power of its right argument. The numeric arguments are\nfirst converted to a common type, and the result is of that type.\n\nFor int operands, the result has the same type as the operands unless\nthe second argument is negative; in that case, all arguments are\nconverted to float and a float result is delivered. For example,\n"10**2" returns "100", but "10**-2" returns "0.01".\n\nRaising "0.0" to a negative power results in a "ZeroDivisionError".\nRaising a negative number to a fractional power results in a "complex"\nnumber. (In earlier versions it raised a "ValueError".)\n',
'raise':u'\nThe "raise" statement\n*********************\n\n raise_stmt ::= "raise" [expression ["from" expression]]\n\nIf no expressions are present, "raise" re-raises the last exception\nthat was active in the current scope. If no exception is active in\nthe current scope, a "RuntimeError" exception is raised indicating\nthat this is an error.\n\nOtherwise, "raise" evaluates the first expression as the exception\nobject. It must be either a subclass or an instance of\n"BaseException". If it is a class, the exception instance will be\nobtained when needed by instantiating the class with no arguments.\n\nThe *type* of the exception is the exception instance\'s class, the\n*value* is the instance itself.\n\nA traceback object is normally created automatically when an exception\nis raised and attached to it as the "__traceback__" attribute, which\nis writable. You can create an exception and set your own traceback in\none step using the "with_traceback()" exception method (which returns\nthe same exception instance, with its traceback set to its argument),\nlike so:\n\n raise Exception("foo occurred").with_traceback(tracebackobj)\n\nThe "from" clause is used for exception chaining: if given, the second\n*expression* must be another exception class or instance, which will\nthen be attached to the raised exception as the "__cause__" attribute\n(which is writable). If the raised exception is not handled, both\nexceptions will be printed:\n\n >>> try:\n ... print(1 / 0)\n ... except Exception as exc:\n ... raise RuntimeError("Something bad happened") from exc\n ...\n Traceback (most recent call last):\n File "<stdin>", line 2, in <module>\n ZeroDivisionError: int division or modulo by zero\n\n The above exception was the direct cause of the following exception:\n\n Traceback (most recent call last):\n File "<stdin>", line 4, in <module>\n RuntimeError: Something bad happened\n\nA similar mechanism works implicitly if an exception is raised inside\nan exception handler or a "finally" clause: the previous exception is\nthen attached as the new exception\'s "__context__" attribute:\n\n >>> try:\n ... print(1 / 0)\n ... except:\n ... raise RuntimeError("Something bad happened")\n ...\n Traceback (most recent call last):\n File "<stdin>", line 2, in <module>\n ZeroDivisionError: int division or modulo by zero\n\n During handling of the above exception, another exception occurred:\n\n Traceback (most recent call last):\n File "<stdin>", line 4, in <module>\n RuntimeError: Something bad happened\n\nAdditional information on exceptions can be found in section\n*Exceptions*, and information about handling exceptions is in section\n*The try statement*.\n',
'return':u'\nThe "return" statement\n**********************\n\n return_stmt ::= "return" [expression_list]\n\n"return" may only occur syntactically nested in a function definition,\nnot within a nested class definition.\n\nIf an expression list is present, it is evaluated, else "None" is\nsubstituted.\n\n"return" leaves the current function call with the expression list (or\n"None") as return value.\n\nWhen "return" passes control out of a "try" statement with a "finally"\nclause, that "finally" clause is executed before really leaving the\nfunction.\n\nIn a generator function, the "return" statement indicates that the\ngenerator is done and will cause "StopIteration" to be raised. The\nreturned value (if any) is used as an argument to construct\n"StopIteration" and becomes the "StopIteration.value" attribute.\n',
'sequence-types':u'\nEmulating container types\n*************************\n\nThe following methods can be defined to implement container objects.\nContainers usually are sequences (such as lists or tuples) or mappings\n(like dictionaries), but can represent other containers as well. The\nfirst set of methods is used either to emulate a sequence or to\nemulate a mapping; the difference is that for a sequence, the\nallowable keys should be the integers *k* for which "0 <= k < N" where\n*N* is the length of the sequence, or slice objects, which define a\nrange of items. It is also recommended that mappings provide the\nmethods "keys()", "values()", "items()", "get()", "clear()",\n"setdefault()", "pop()", "popitem()", "copy()", and "update()"\nbehaving similar to those for Python\'s standard dictionary objects.\nThe "collections" module provides a "MutableMapping" abstract base\nclass to help create those methods from a base set of "__getitem__()",\n"__setitem__()", "__delitem__()", and "keys()". Mutable sequences\nshould provide methods "append()", "count()", "index()", "extend()",\n"insert()", "pop()", "remove()", "reverse()" and "sort()", like Python\nstandard list objects. Finally, sequence types should implement\naddition (meaning concatenation) and multiplication (meaning\nrepetition) by defining the methods "__add__()", "__radd__()",\n"__iadd__()", "__mul__()", "__rmul__()" and "__imul__()" described\nbelow; they should not define other numerical operators. It is\nrecommended that both mappings and sequences implement the\n"__contains__()" method to allow efficient use of the "in" operator;\nfor mappings, "in" should search the mapping\'s keys; for sequences, it\nshould search through the values. It is further recommended that both\nmappings and sequences implement the "__iter__()" method to allow\nefficient iteration through the container; for mappings, "__iter__()"\nshould be the same as "keys()"; for sequences, it should iterate\nthrough the values.\n\nobject.__len__(self)\n\n Called to implement the built-in function "len()". Should return\n the length of the object, an integer ">=" 0. Also, an object that\n doesn\'t define a "__bool__()" method and whose "__len__()" method\n returns zero is considered to be false in a Boolean context.\n\nobject.__length_hint__(self)\n\n Called to implement "operator.length_hint()". Should return an\n estimated length for the object (which may be greater or less than\n the actual length). The length must be an integer ">=" 0. This\n method is purely an optimization and is never required for\n correctness.\n\n New in version 3.4.\n\nNote: Slicing is done exclusively with the following three methods.\n A call like\n\n a[1:2] = b\n\n is translated to\n\n a[slice(1, 2, None)] = b\n\n and so forth. Missing slice items are always filled in with "None".\n\nobject.__getitem__(self, key)\n\n Called to implement evaluation of "self[key]". For sequence types,\n the accepted keys should be integers and slice objects. Note that\n the special interpretation of negative indexes (if the class wishes\n to emulate a sequence type) is up to the "__getitem__()" method. If\n *key* is of an inappropriate type, "TypeError" may be raised; if of\n a value outside the set of indexes for the sequence (after any\n special interpretation of negative values), "IndexError" should be\n raised. For mapping types, if *key* is missing (not in the\n container), "KeyError" should be raised.\n\n Note: "for" loops expect that an "IndexError" will be raised for\n illegal indexes to allow proper detection of the end of the\n sequence.\n\nobject.__missing__(self, key)\n\n Called by "dict"."__getitem__()" to implement "self[key]" for dict\n subclasses when key is not in the dictionary.\n\nobject.__setitem__(self, key, value)\n\n Called to implement assignment to "self[key]". Same note as for\n"__getitem__()". This should only be implemented for mappings if\n the objects support changes to the values for keys, or if new keys\n can be added
'shifting':u'\nShifting operations\n*******************\n\nThe shifting operations have lower priority than the arithmetic\noperations:\n\n shift_expr ::= a_expr | shift_expr ( "<<" | ">>" ) a_expr\n\nThese operators accept integers as arguments. They shift the first\nargument to the left or right by the number of bits given by the\nsecond argument.\n\nA right shift by *n* bits is defined as floor division by "pow(2,n)".\nA left shift by *n* bits is defined as multiplication with "pow(2,n)".\n\nNote: In the current implementation, the right-hand operand is\n required to be at most "sys.maxsize". If the right-hand operand is\n larger than "sys.maxsize" an "OverflowError" exception is raised.\n',
'slicings':u'\nSlicings\n********\n\nA slicing selects a range of items in a sequence object (e.g., a\nstring, tuple or list). Slicings may be used as expressions or as\ntargets in assignment or "del" statements. The syntax for a slicing:\n\n slicing ::= primary "[" slice_list "]"\n slice_list ::= slice_item ("," slice_item)* [","]\n slice_item ::= expression | proper_slice\n proper_slice ::= [lower_bound] ":" [upper_bound] [ ":" [stride] ]\n lower_bound ::= expression\n upper_bound ::= expression\n stride ::= expression\n\nThere is ambiguity in the formal syntax here: anything that looks like\nan expression list also looks like a slice list, so any subscription\ncan be interpreted as a slicing. Rather than further complicating the\nsyntax, this is disambiguated by defining that in this case the\ninterpretation as a subscription takes priority over the\ninterpretation as a slicing (this is the case if the slice list\ncontains no proper slice).\n\nThe semantics for a slicing are as follows. The primary is indexed\n(using the same "__getitem__()" method as normal subscription) with a\nkey that is constructed from the slice list, as follows. If the slice\nlist contains at least one comma, the key is a tuple containing the\nconversion of the slice items; otherwise, the conversion of the lone\nslice item is the key. The conversion of a slice item that is an\nexpression is that expression. The conversion of a proper slice is a\nslice object (see section *The standard type hierarchy*) whose\n"start", "stop" and "step" attributes are the values of the\nexpressions given as lower bound, upper bound and stride,\nrespectively, substituting "None" for missing expressions.\n',
'specialattrs':u'\nSpecial Attributes\n******************\n\nThe implementation adds a few special read-only attributes to several\nobject types, where they are relevant. Some of these are not reported\nby the "dir()" built-in function.\n\nobject.__dict__\n\n A dictionary or other mapping object used to store an object\'s\n (writable) attributes.\n\ninstance.__class__\n\n The class to which a class instance belongs.\n\nclass.__bases__\n\n The tuple of base classes of a class object.\n\nclass.__name__\n\n The name of the class or type.\n\nclass.__qualname__\n\n The *qualified name* of the class or type.\n\n New in version 3.3.\n\nclass.__mro__\n\n This attribute is a tuple of classes that are considered when\n looking for base classes during method resolution.\n\nclass.mro()\n\n This method can be overridden by a metaclass to customize the\n method resolution order for its instances. It is called at class\n instantiation, and its result is stored in "__mro__".\n\nclass.__subclasses__()\n\n Each class keeps a list of weak references to its immediate\n subclasses. This method returns a list of all those references\n still alive. Example:\n\n >>> int.__subclasses__()\n [<class \'bool\'>]\n\n-[ Footnotes ]-\n\n[1] Additional information on these special methods may be found\n in the Python Reference Manual (*Basic customization*).\n\n[2] As a consequence, the list "[1, 2]" is considered equal to\n"[1.0, 2.0]", and similarly for tuples.\n\n[3] They must have since the parser can\'t tell the type of the\n operands.\n\n[4] Cased characters are those with general category property\n being one of "Lu" (Letter, uppercase), "Ll" (Letter, lowercase),\n or "Lt" (Letter, titlecase).\n\n[5] To format only a tuple you should therefore provide a\n singleton tuple whose only element is the tuple to be formatted.\n',
'specialnames':u'\nSpecial method names\n********************\n\nA class can implement certain operations that are invoked by special\nsyntax (such as arithmetic operations or subscripting and slicing) by\ndefining methods with special names. This is Python\'s approach to\n*operator overloading*, allowing classes to define their own behavior\nwith respect to language operators. For instance, if a class defines\na method named "__getitem__()", and "x" is an instance of this class,\nthen "x[i]" is roughly equivalent to "type(x).__getitem__(x, i)".\nExcept where mentioned, attempts to execute an operation raise an\nexception when no appropriate method is defined (typically\n"AttributeError" or "TypeError").\n\nWhen implementing a class that emulates any built-in type, it is\nimportant that the emulation only be implemented to the degree that it\nmakes sense for the object being modelled. For example, some\nsequences may work well with retrieval of individual elements, but\nextracting a slice may not make sense. (One example of this is the\n"NodeList" interface in the W3C\'s Document Object Model.)\n\n\nBasic customization\n===================\n\nobject.__new__(cls[, ...])\n\n Called to create a new instance of class *cls*. "__new__()" is a\n static method (special-cased so you need not declare it as such)\n that takes the class of which an instance was requested as its\n first argument. The remaining arguments are those passed to the\n object constructor expression (the call to the class). The return\n value of "__new__()" should be the new object instance (usually an\n instance of *cls*).\n\n Typical implementations create a new instance of the class by\n invoking the superclass\'s "__new__()" method using\n"super(currentclass, cls).__new__(cls[, ...])" with appropriate\n arguments and then modifying the newly-created instance as\n necessary before returning it.\n\n If "__new__()" returns an instance of *cls*, then the new\n instance\'s "__init__()" method will be invoked like\n"__init__(self[, ...])", where *self* is the new instance and the\n remaining arguments are the same as were passed to "__new__()".\n\n If "__new__()" does not return an instance of *cls*, then the new\n instance\'s "__init__()" method will not be invoked.\n\n"__new__()" is intended mainly to allow subclasses of immutable\n types (like int, str, or tuple) to customize instance creation. It\n is also commonly overridden in custom metaclasses in order to\n customize class creation.\n\nobject.__init__(self[, ...])\n\n Called after the instance has been created (by "__new__()"), but\n before it is returned to the caller. The arguments are those\n passed to the class constructor expression. If a base class has an\n"__init__()" method, the derived class\'s "__init__()" method, if\n any, must explicitly call it to ensure proper initialization of the\n base class part of the instance; for example:\n"BaseClass.__init__(self, [args...])".\n\n Because "__new__()" and "__init__()" work together in constructing\n objects ("__new__()" to create it, and "__init__()" to customise\n it), no non-"None" value may be returned by "__init__()"; doing so\n will cause a "TypeError" to be raised at runtime.\n\nobject.__del__(self)\n\n Called when the instance is about to be destroyed. This is also\n called a destructor. If a base class has a "__del__()" method, the\n derived class\'s "__del__()" method, if any, must explicitly call it\n to ensure proper deletion of the base class part of the instance.\n Note that it is possible (though not recommended!) for the\n"__del__()" method to postpone destruction of the instance by\n creating a new reference to it. It may then be called at a later\n time when this new reference is deleted. It is not guaranteed that\n"__del__()" methods are called for objects that still exist when\n the interpreter exits.\n\n Note: "del x" doesn\'t directly call "x.__del__()" --- the former\n decrements the reference count for "x" by one
'string-methods':u'\nString Methods\n**************\n\nStrings implement all of the *common* sequence operations, along with\nthe additional methods described below.\n\nStrings also support two styles of string formatting, one providing a\nlarge degree of flexibility and customization (see "str.format()",\n*Format String Syntax* and *String Formatting*) and the other based on\nC "printf" style formatting that handles a narrower range of types and\nis slightly harder to use correctly, but is often faster for the cases\nit can handle (*printf-style String Formatting*).\n\nThe *Text Processing Services* section of the standard library covers\na number of other modules that provide various text related utilities\n(including regular expression support in the "re" module).\n\nstr.capitalize()\n\n Return a copy of the string with its first character capitalized\n and the rest lowercased.\n\nstr.casefold()\n\n Return a casefolded copy of the string. Casefolded strings may be\n used for caseless matching.\n\n Casefolding is similar to lowercasing but more aggressive because\n it is intended to remove all case distinctions in a string. For\n example, the German lowercase letter "\'\xdf\'" is equivalent to ""ss"".\n Since it is already lowercase, "lower()" would do nothing to "\'\xdf\'";\n"casefold()" converts it to ""ss"".\n\n The casefolding algorithm is described in section 3.13 of the\n Unicode Standard.\n\n New in version 3.3.\n\nstr.center(width[, fillchar])\n\n Return centered in a string of length *width*. Padding is done\n using the specified *fillchar* (default is an ASCII space). The\n original string is returned if *width* is less than or equal to\n"len(s)".\n\nstr.count(sub[, start[, end]])\n\n Return the number of non-overlapping occurrences of substring *sub*\n in the range [*start*, *end*]. Optional arguments *start* and\n *end* are interpreted as in slice notation.\n\nstr.encode(encoding="utf-8", errors="strict")\n\n Return an encoded version of the string as a bytes object. Default\n encoding is "\'utf-8\'". *errors* may be given to set a different\n error handling scheme. The default for *errors* is "\'strict\'",\n meaning that encoding errors raise a "UnicodeError". Other possible\n values are "\'ignore\'", "\'replace\'", "\'xmlcharrefreplace\'",\n"\'backslashreplace\'" and any other name registered via\n"codecs.register_error()", see section *Error Handlers*. For a list\n of possible encodings, see section *Standard Encodings*.\n\n Changed in version 3.1: Support for keyword arguments added.\n\nstr.endswith(suffix[, start[, end]])\n\n Return "True" if the string ends with the specified *suffix*,\n otherwise return "False". *suffix* can also be a tuple of suffixes\n to look for. With optional *start*, test beginning at that\n position. With optional *end*, stop comparing at that position.\n\nstr.expandtabs(tabsize=8)\n\n Return a copy of the string where all tab characters are replaced\n by one or more spaces, depending on the current column and the\n given tab size. Tab positions occur every *tabsize* characters\n (default is 8, giving tab positions at columns 0, 8, 16 and so on).\n To expand the string, the current column is set to zero and the\n string is examined character by character. If the character is a\n tab ("\\t"), one or more space characters are inserted in the result\n until the current column is equal to the next tab position. (The\n tab character itself is not copied.) If the character is a newline\n ("\\n") or return ("\\r"), it is copied and the current column is\n reset to zero. Any other character is copied unchanged and the\n current column is incremented by one regardless of how the\n character is represented when printed.\n\n >>> \'01\\t012\\t0123\\t01234\'.expandtabs()\n\'01 012 0123 01234\'\n >>> \'01\\t012\\t0123\\t01234\'.expandtabs(4)\n\'01 012 0123 01234\'\n\nstr.find(sub[, start[, end]])\n\n Return the lowest index in the string where substring *sub*
'strings':u'\nString and Bytes literals\n*************************\n\nString literals are described by the following lexical definitions:\n\n stringliteral ::= [stringprefix](shortstring | longstring)\n stringprefix ::= "r" | "u" | "R" | "U"\n shortstring ::= "\'" shortstringitem* "\'" | \'"\' shortstringitem* \'"\'\n longstring ::= "\'\'\'" longstringitem* "\'\'\'" | \'"""\' longstringitem* \'"""\'\n shortstringitem ::= shortstringchar | stringescapeseq\n longstringitem ::= longstringchar | stringescapeseq\n shortstringchar ::= <any source character except "\\" or newline or the quote>\n longstringchar ::= <any source character except "\\">\n stringescapeseq ::= "\\" <any source character>\n\n bytesliteral ::= bytesprefix(shortbytes | longbytes)\n bytesprefix ::= "b" | "B" | "br" | "Br" | "bR" | "BR" | "rb" | "rB" | "Rb" | "RB"\n shortbytes ::= "\'" shortbytesitem* "\'" | \'"\' shortbytesitem* \'"\'\n longbytes ::= "\'\'\'" longbytesitem* "\'\'\'" | \'"""\' longbytesitem* \'"""\'\n shortbytesitem ::= shortbyteschar | bytesescapeseq\n longbytesitem ::= longbyteschar | bytesescapeseq\n shortbyteschar ::= <any ASCII character except "\\" or newline or the quote>\n longbyteschar ::= <any ASCII character except "\\">\n bytesescapeseq ::= "\\" <any ASCII character>\n\nOne syntactic restriction not indicated by these productions is that\nwhitespace is not allowed between the "stringprefix" or "bytesprefix"\nand the rest of the literal. The source character set is defined by\nthe encoding declaration; it is UTF-8 if no encoding declaration is\ngiven in the source file; see section *Encoding declarations*.\n\nIn plain English: Both types of literals can be enclosed in matching\nsingle quotes ("\'") or double quotes ("""). They can also be enclosed\nin matching groups of three single or double quotes (these are\ngenerally referred to as *triple-quoted strings*). The backslash\n("\\") character is used to escape characters that otherwise have a\nspecial meaning, such as newline, backslash itself, or the quote\ncharacter.\n\nBytes literals are always prefixed with "\'b\'" or "\'B\'"; they produce\nan instance of the "bytes" type instead of the "str" type. They may\nonly contain ASCII characters; bytes with a numeric value of 128 or\ngreater must be expressed with escapes.\n\nAs of Python 3.3 it is possible again to prefix string literals with a\n"u" prefix to simplify maintenance of dual 2.x and 3.x codebases.\n\nBoth string and bytes literals may optionally be prefixed with a\nletter "\'r\'" or "\'R\'"; such strings are called *raw strings* and treat\nbackslashes as literal characters. As a result, in string literals,\n"\'\\U\'" and "\'\\u\'" escapes in raw strings are not treated specially.\nGiven that Python 2.x\'s raw unicode literals behave differently than\nPython 3.x\'s the "\'ur\'" syntax is not supported.\n\nNew in version 3.3: The "\'rb\'" prefix of raw bytes literals has been\nadded as a synonym of "\'br\'".\n\nNew in version 3.3: Support for the unicode legacy literal\n("u\'value\'") was reintroduced to simplify the maintenance of dual\nPython 2.x and 3.x codebases. See **PEP 414** for more information.\n\nIn triple-quoted literals, unescaped newlines and quotes are allowed\n(and are retained), except that three unescaped quotes in a row\nterminate the literal. (A "quote" is the character used to open the\nliteral, i.e. either "\'" or """.)\n\nUnless an "\'r\'" or "\'R\'" prefix is present, escape sequences in string\nand bytes literals are interpreted according to rules similar to those\nused by Standard C. The recognized escape sequences are:\n\n+-------------------+-----------------------------------+---------+\n| Escape Sequence | Meaning | Notes |\n+===================+===================================+=========+\n| "\\newline" | Backslash and newline ignored | |\n+-------------------+-----------------------------------+---------+\n| "\\\\" | Backslash ("\\")
'subscriptions':u'\nSubscriptions\n*************\n\nA subscription selects an item of a sequence (string, tuple or list)\nor mapping (dictionary) object:\n\n subscription ::= primary "[" expression_list "]"\n\nThe primary must evaluate to an object that supports subscription\n(lists or dictionaries for example). User-defined objects can support\nsubscription by defining a "__getitem__()" method.\n\nFor built-in objects, there are two types of objects that support\nsubscription:\n\nIf the primary is a mapping, the expression list must evaluate to an\nobject whose value is one of the keys of the mapping, and the\nsubscription selects the value in the mapping that corresponds to that\nkey. (The expression list is a tuple except if it has exactly one\nitem.)\n\nIf the primary is a sequence, the expression (list) must evaluate to\nan integer or a slice (as discussed in the following section).\n\nThe formal syntax makes no special provision for negative indices in\nsequences; however, built-in sequences all provide a "__getitem__()"\nmethod that interprets negative indices by adding the length of the\nsequence to the index (so that "x[-1]" selects the last item of "x").\nThe resulting value must be a nonnegative integer less than the number\nof items in the sequence, and the subscription selects the item whose\nindex is that value (counting from zero). Since the support for\nnegative indices and slicing occurs in the object\'s "__getitem__()"\nmethod, subclasses overriding this method will need to explicitly add\nthat support.\n\nA string\'s items are characters. A character is not a separate data\ntype but a string of exactly one character.\n',
'truth':u'\nTruth Value Testing\n*******************\n\nAny object can be tested for truth value, for use in an "if" or\n"while" condition or as operand of the Boolean operations below. The\nfollowing values are considered false:\n\n* "None"\n\n* "False"\n\n* zero of any numeric type, for example, "0", "0.0", "0j".\n\n* any empty sequence, for example, "\'\'", "()", "[]".\n\n* any empty mapping, for example, "{}".\n\n* instances of user-defined classes, if the class defines a\n"__bool__()" or "__len__()" method, when that method returns the\n integer zero or "bool" value "False". [1]\n\nAll other values are considered true --- so objects of many types are\nalways true.\n\nOperations and built-in functions that have a Boolean result always\nreturn "0" or "False" for false and "1" or "True" for true, unless\notherwise stated. (Important exception: the Boolean operations "or"\nand "and" always return one of their operands.)\n',
'try':u'\nThe "try" statement\n*******************\n\nThe "try" statement specifies exception handlers and/or cleanup code\nfor a group of statements:\n\n try_stmt ::= try1_stmt | try2_stmt\n try1_stmt ::= "try"":" suite\n ("except" [expression ["as" identifier]] ":" suite)+\n ["else"":" suite]\n ["finally"":" suite]\n try2_stmt ::= "try"":" suite\n"finally"":" suite\n\nThe "except" clause(s) specify one or more exception handlers. When no\nexception occurs in the "try" clause, no exception handler is\nexecuted. When an exception occurs in the "try" suite, a search for an\nexception handler is started. This search inspects the except clauses\nin turn until one is found that matches the exception. An expression-\nless except clause, if present, must be last; it matches any\nexception. For an except clause with an expression, that expression\nis evaluated, and the clause matches the exception if the resulting\nobject is "compatible" with the exception. An object is compatible\nwith an exception if it is the class or a base class of the exception\nobject or a tuple containing an item compatible with the exception.\n\nIf no except clause matches the exception, the search for an exception\nhandler continues in the surrounding code and on the invocation stack.\n[1]\n\nIf the evaluation of an expression in the header of an except clause\nraises an exception, the original search for a handler is canceled and\na search starts for the new exception in the surrounding code and on\nthe call stack (it is treated as if the entire "try" statement raised\nthe exception).\n\nWhen a matching except clause is found, the exception is assigned to\nthe target specified after the "as" keyword in that except clause, if\npresent, and the except clause\'s suite is executed. All except\nclauses must have an executable block. When the end of this block is\nreached, execution continues normally after the entire try statement.\n(This means that if two nested handlers exist for the same exception,\nand the exception occurs in the try clause of the inner handler, the\nouter handler will not handle the exception.)\n\nWhen an exception has been assigned using "as target", it is cleared\nat the end of the except clause. This is as if\n\n except E as N:\n foo\n\nwas translated to\n\n except E as N:\n try:\n foo\n finally:\n del N\n\nThis means the exception must be assigned to a different name to be\nable to refer to it after the except clause. Exceptions are cleared\nbecause with the traceback attached to them, they form a reference\ncycle with the stack frame, keeping all locals in that frame alive\nuntil the next garbage collection occurs.\n\nBefore an except clause\'s suite is executed, details about the\nexception are stored in the "sys" module and can be accessed via\n"sys.exc_info()". "sys.exc_info()" returns a 3-tuple consisting of the\nexception class, the exception instance and a traceback object (see\nsection *The standard type hierarchy*) identifying the point in the\nprogram where the exception occurred. "sys.exc_info()" values are\nrestored to their previous values (before the call) when returning\nfrom a function that handled an exception.\n\nThe optional "else" clause is executed if and when control flows off\nthe end of the "try" clause. [2] Exceptions in the "else" clause are\nnot handled by the preceding "except" clauses.\n\nIf "finally" is present, it specifies a \'cleanup\' handler. The "try"\nclause is executed, including any "except" and "else" clauses. If an\nexception occurs in any of the clauses and is not handled, the\nexception is temporarily saved. The "finally" clause is executed. If\nthere is a saved exception it is re-raised at the end of the "finally"\nclause. If the "finally" clause raises another exception, the saved\nexception is set as the context of the new exception. If the "finally"\nclause executes a "return" or "break" statement, the saved exception\nis discarded:\n\n >>> def f():
'types':u'\nThe standard type hierarchy\n***************************\n\nBelow is a list of the types that are built into Python. Extension\nmodules (written in C, Java, or other languages, depending on the\nimplementation) can define additional types. Future versions of\nPython may add types to the type hierarchy (e.g., rational numbers,\nefficiently stored arrays of integers, etc.), although such additions\nwill often be provided via the standard library instead.\n\nSome of the type descriptions below contain a paragraph listing\n\'special attributes.\' These are attributes that provide access to the\nimplementation and are not intended for general use. Their definition\nmay change in the future.\n\nNone\n This type has a single value. There is a single object with this\n value. This object is accessed through the built-in name "None". It\n is used to signify the absence of a value in many situations, e.g.,\n it is returned from functions that don\'t explicitly return\n anything. Its truth value is false.\n\nNotImplemented\n This type has a single value. There is a single object with this\n value. This object is accessed through the built-in name\n"NotImplemented". Numeric methods and rich comparison methods\n should return this value if they do not implement the operation for\n the operands provided. (The interpreter will then try the\n reflected operation, or some other fallback, depending on the\n operator.) Its truth value is true.\n\n See *Implementing the arithmetic operations* for more details.\n\nEllipsis\n This type has a single value. There is a single object with this\n value. This object is accessed through the literal "..." or the\n built-in name "Ellipsis". Its truth value is true.\n\n"numbers.Number"\n These are created by numeric literals and returned as results by\n arithmetic operators and arithmetic built-in functions. Numeric\n objects are immutable; once created their value never changes.\n Python numbers are of course strongly related to mathematical\n numbers, but subject to the limitations of numerical representation\n in computers.\n\n Python distinguishes between integers, floating point numbers, and\n complex numbers:\n\n"numbers.Integral"\n These represent elements from the mathematical set of integers\n (positive and negative).\n\n There are two types of integers:\n\n Integers ("int")\n\n These represent numbers in an unlimited range, subject to\n available (virtual) memory only. For the purpose of shift\n and mask operations, a binary representation is assumed, and\n negative numbers are represented in a variant of 2\'s\n complement which gives the illusion of an infinite string of\n sign bits extending to the left.\n\n Booleans ("bool")\n These represent the truth values False and True. The two\n objects representing the values "False" and "True" are the\n only Boolean objects. The Boolean type is a subtype of the\n integer type, and Boolean values behave like the values 0 and\n 1, respectively, in almost all contexts, the exception being\n that when converted to a string, the strings ""False"" or\n""True"" are returned, respectively.\n\n The rules for integer representation are intended to give the\n most meaningful interpretation of shift and mask operations\n involving negative integers.\n\n"numbers.Real" ("float")\n These represent machine-level double precision floating point\n numbers. You are at the mercy of the underlying machine\n architecture (and C or Java implementation) for the accepted\n range and handling of overflow. Python does not support single-\n precision floating point numbers; the savings in processor and\n memory usage that are usually the reason for using these are\n dwarfed by the overhead of using objects in Python, so there is\n no reason to complicate the language with two kinds of floating\n point number
'typesfunctions':u'\nFunctions\n*********\n\nFunction objects are created by function definitions. The only\noperation on a function object is to call it: "func(argument-list)".\n\nThere are really two flavors of function objects: built-in functions\nand user-defined functions. Both support the same operation (to call\nthe function), but the implementation is different, hence the\ndifferent object types.\n\nSee *Function definitions* for more information.\n',
'typesmapping':u'\nMapping Types --- "dict"\n************************\n\nA *mapping* object maps *hashable* values to arbitrary objects.\nMappings are mutable objects. There is currently only one standard\nmapping type, the *dictionary*. (For other containers see the built-\nin "list", "set", and "tuple" classes, and the "collections" module.)\n\nA dictionary\'s keys are *almost* arbitrary values. Values that are\nnot *hashable*, that is, values containing lists, dictionaries or\nother mutable types (that are compared by value rather than by object\nidentity) may not be used as keys. Numeric types used for keys obey\nthe normal rules for numeric comparison: if two numbers compare equal\n(such as "1" and "1.0") then they can be used interchangeably to index\nthe same dictionary entry. (Note however, that since computers store\nfloating-point numbers as approximations it is usually unwise to use\nthem as dictionary keys.)\n\nDictionaries can be created by placing a comma-separated list of "key:\nvalue" pairs within braces, for example: "{\'jack\': 4098, \'sjoerd\':\n4127}" or "{4098: \'jack\', 4127: \'sjoerd\'}", or by the "dict"\nconstructor.\n\nclass class dict(**kwarg)\nclass class dict(mapping, **kwarg)\nclass class dict(iterable, **kwarg)\n\n Return a new dictionary initialized from an optional positional\n argument and a possibly empty set of keyword arguments.\n\n If no positional argument is given, an empty dictionary is created.\n If a positional argument is given and it is a mapping object, a\n dictionary is created with the same key-value pairs as the mapping\n object. Otherwise, the positional argument must be an *iterable*\n object. Each item in the iterable must itself be an iterable with\n exactly two objects. The first object of each item becomes a key\n in the new dictionary, and the second object the corresponding\n value. If a key occurs more than once, the last value for that key\n becomes the corresponding value in the new dictionary.\n\n If keyword arguments are given, the keyword arguments and their\n values are added to the dictionary created from the positional\n argument. If a key being added is already present, the value from\n the keyword argument replaces the value from the positional\n argument.\n\n To illustrate, the following examples all return a dictionary equal\n to "{"one": 1, "two": 2, "three": 3}":\n\n >>> a = dict(one=1, two=2, three=3)\n >>> b = {\'one\': 1, \'two\': 2, \'three\': 3}\n >>> c = dict(zip([\'one\', \'two\', \'three\'], [1, 2, 3]))\n >>> d = dict([(\'two\', 2), (\'one\', 1), (\'three\', 3)])\n >>> e = dict({\'three\': 3, \'one\': 1, \'two\': 2})\n >>> a == b == c == d == e\n True\n\n Providing keyword arguments as in the first example only works for\n keys that are valid Python identifiers. Otherwise, any valid keys\n can be used.\n\n These are the operations that dictionaries support (and therefore,\n custom mapping types should support too):\n\n len(d)\n\n Return the number of items in the dictionary *d*.\n\n d[key]\n\n Return the item of *d* with key *key*. Raises a "KeyError" if\n *key* is not in the map.\n\n If a subclass of dict defines a method "__missing__()" and *key*\n is not present, the "d[key]" operation calls that method with\n the key *key* as argument. The "d[key]" operation then returns\n or raises whatever is returned or raised by the\n"__missing__(key)" call. No other operations or methods invoke\n"__missing__()". If "__missing__()" is not defined, "KeyError"\n is raised. "__missing__()" must be a method; it cannot be an\n instance variable:\n\n >>> class Counter(dict):\n ... def __missing__(self, key):\n ... return 0\n >>> c = Counter()\n >>> c[\'red\']\n 0\n >>> c[\'red\'] += 1\n >>> c[\'red\']\n 1\n\n The example above shows part of the implementation of\n"collections.Counter". A different "__missing
'typesmethods':u'\nMethods\n*******\n\nMethods are functions that are called using the attribute notation.\nThere are two flavors: built-in methods (such as "append()" on lists)\nand class instance methods. Built-in methods are described with the\ntypes that support them.\n\nIf you access a method (a function defined in a class namespace)\nthrough an instance, you get a special object: a *bound method* (also\ncalled *instance method*) object. When called, it will add the "self"\nargument to the argument list. Bound methods have two special read-\nonly attributes: "m.__self__" is the object on which the method\noperates, and "m.__func__" is the function implementing the method.\nCalling "m(arg-1, arg-2, ..., arg-n)" is completely equivalent to\ncalling "m.__func__(m.__self__, arg-1, arg-2, ..., arg-n)".\n\nLike function objects, bound method objects support getting arbitrary\nattributes. However, since method attributes are actually stored on\nthe underlying function object ("meth.__func__"), setting method\nattributes on bound methods is disallowed. Attempting to set an\nattribute on a method results in an "AttributeError" being raised. In\norder to set a method attribute, you need to explicitly set it on the\nunderlying function object:\n\n >>> class C:\n ... def method(self):\n ... pass\n ...\n >>> c = C()\n >>> c.method.whoami = \'my name is method\' # can\'t set on the method\n Traceback (most recent call last):\n File "<stdin>", line 1, in <module>\n AttributeError: \'method\' object has no attribute \'whoami\'\n >>> c.method.__func__.whoami = \'my name is method\'\n >>> c.method.whoami\n\'my name is method\'\n\nSee *The standard type hierarchy* for more information.\n',
'typesmodules':u'\nModules\n*******\n\nThe only special operation on a module is attribute access: "m.name",\nwhere *m* is a module and *name* accesses a name defined in *m*\'s\nsymbol table. Module attributes can be assigned to. (Note that the\n"import" statement is not, strictly speaking, an operation on a module\nobject; "import foo" does not require a module object named *foo* to\nexist, rather it requires an (external) *definition* for a module\nnamed *foo* somewhere.)\n\nA special attribute of every module is "__dict__". This is the\ndictionary containing the module\'s symbol table. Modifying this\ndictionary will actually change the module\'s symbol table, but direct\nassignment to the "__dict__" attribute is not possible (you can write\n"m.__dict__[\'a\'] = 1", which defines "m.a" to be "1", but you can\'t\nwrite "m.__dict__ = {}"). Modifying "__dict__" directly is not\nrecommended.\n\nModules built into the interpreter are written like this: "<module\n\'sys\' (built-in)>". If loaded from a file, they are written as\n"<module \'os\' from \'/usr/local/lib/pythonX.Y/os.pyc\'>".\n',
'typesseq':u'\nSequence Types --- "list", "tuple", "range"\n*******************************************\n\nThere are three basic sequence types: lists, tuples, and range\nobjects. Additional sequence types tailored for processing of *binary\ndata* and *text strings* are described in dedicated sections.\n\n\nCommon Sequence Operations\n==========================\n\nThe operations in the following table are supported by most sequence\ntypes, both mutable and immutable. The "collections.abc.Sequence" ABC\nis provided to make it easier to correctly implement these operations\non custom sequence types.\n\nThis table lists the sequence operations sorted in ascending priority.\nIn the table, *s* and *t* are sequences of the same type, *n*, *i*,\n*j* and *k* are integers and *x* is an arbitrary object that meets any\ntype and value restrictions imposed by *s*.\n\nThe "in" and "not in" operations have the same priorities as the\ncomparison operations. The "+" (concatenation) and "*" (repetition)\noperations have the same priority as the corresponding numeric\noperations.\n\n+----------------------------+----------------------------------+------------+\n| Operation | Result | Notes |\n+============================+==================================+============+\n| "x in s" | "True" if an item of *s* is | (1) |\n| | equal to *x*, else "False" | |\n+----------------------------+----------------------------------+------------+\n| "x not in s" | "False" if an item of *s* is | (1) |\n| | equal to *x*, else "True" | |\n+----------------------------+----------------------------------+------------+\n| "s + t" | the concatenation of *s* and *t* | (6)(7) |\n+----------------------------+----------------------------------+------------+\n| "s * n" or "n * s" | *n* shallow copies of *s* | (2)(7) |\n| | concatenated | |\n+----------------------------+----------------------------------+------------+\n| "s[i]" | *i*th item of *s*, origin 0 | (3) |\n+----------------------------+----------------------------------+------------+\n| "s[i:j]" | slice of *s* from *i* to *j* | (3)(4) |\n+----------------------------+----------------------------------+------------+\n| "s[i:j:k]" | slice of *s* from *i* to *j* | (3)(5) |\n| | with step *k* | |\n+----------------------------+----------------------------------+------------+\n| "len(s)" | length of *s* | |\n+----------------------------+----------------------------------+------------+\n| "min(s)" | smallest item of *s* | |\n+----------------------------+----------------------------------+------------+\n| "max(s)" | largest item of *s* | |\n+----------------------------+----------------------------------+------------+\n| "s.index(x[, i[, j]])" | index of the first occurrence of | (8) |\n| | *x* in *s* (at or after index | |\n| | *i* and before index *j*) | |\n+----------------------------+----------------------------------+------------+\n| "s.count(x)" | total number of occurrences of | |\n| | *x* in *s* | |\n+----------------------------+----------------------------------+------------+\n\nSequences of the same type also support comparisons. In particular,\ntuples and lists are compared lexicographically by comparing\ncorresponding elements. This means that to compare equal, every\nelement must compare equal and the two sequences must be of the same\ntype and have the same
'typesseq-mutable':u'\nMutable Sequence Types\n**********************\n\nThe operations in the following table are defined on mutable sequence\ntypes. The "collections.abc.MutableSequence" ABC is provided to make\nit easier to correctly implement these operations on custom sequence\ntypes.\n\nIn the table *s* is an instance of a mutable sequence type, *t* is any\niterable object and *x* is an arbitrary object that meets any type and\nvalue restrictions imposed by *s* (for example, "bytearray" only\naccepts integers that meet the value restriction "0 <= x <= 255").\n\n+--------------------------------+----------------------------------+-----------------------+\n| Operation | Result | Notes |\n+================================+==================================+=======================+\n| "s[i] = x" | item *i* of *s* is replaced by | |\n| | *x* | |\n+--------------------------------+----------------------------------+-----------------------+\n| "s[i:j] = t" | slice of *s* from *i* to *j* is | |\n| | replaced by the contents of the | |\n| | iterable *t* | |\n+--------------------------------+----------------------------------+-----------------------+\n| "del s[i:j]" | same as "s[i:j] = []" | |\n+--------------------------------+----------------------------------+-----------------------+\n| "s[i:j:k] = t" | the elements of "s[i:j:k]" are | (1) |\n| | replaced by those of *t* | |\n+--------------------------------+----------------------------------+-----------------------+\n| "del s[i:j:k]" | removes the elements of | |\n| | "s[i:j:k]" from the list | |\n+--------------------------------+----------------------------------+-----------------------+\n| "s.append(x)" | appends *x* to the end of the | |\n| | sequence (same as | |\n| | "s[len(s):len(s)] = [x]") | |\n+--------------------------------+----------------------------------+-----------------------+\n| "s.clear()" | removes all items from "s" (same | (5) |\n| | as "del s[:]") | |\n+--------------------------------+----------------------------------+-----------------------+\n| "s.copy()" | creates a shallow copy of "s" | (5) |\n| | (same as "s[:]") | |\n+--------------------------------+----------------------------------+-----------------------+\n| "s.extend(t)" | extends *s* with the contents of | |\n| | *t* (same as "s[len(s):len(s)] = | |\n| | t") | |\n+--------------------------------+----------------------------------+-----------------------+\n| "s.insert(i, x)" | inserts *x* into *s* at the | |\n| | index given by *i* (same as | |\n| | "s[i:i] = [x]") | |\n+--------------------------------+----------------------------------+-----------------------+\n| "s.pop([i])" | retrieves the item at *i* and | (2) |\n|
'unary':u'\nUnary arithmetic and bitwise operations\n***************************************\n\nAll unary arithmetic and bitwise operations have the same priority:\n\n u_expr ::= power | "-" u_expr | "+" u_expr | "~" u_expr\n\nThe unary "-" (minus) operator yields the negation of its numeric\nargument.\n\nThe unary "+" (plus) operator yields its numeric argument unchanged.\n\nThe unary "~" (invert) operator yields the bitwise inversion of its\ninteger argument. The bitwise inversion of "x" is defined as\n"-(x+1)". It only applies to integral numbers.\n\nIn all three cases, if the argument does not have the proper type, a\n"TypeError" exception is raised.\n',
'while':u'\nThe "while" statement\n*********************\n\nThe "while" statement is used for repeated execution as long as an\nexpression is true:\n\n while_stmt ::= "while" expression ":" suite\n ["else"":" suite]\n\nThis repeatedly tests the expression and, if it is true, executes the\nfirst suite; if the expression is false (which may be the first time\nit is tested) the suite of the "else" clause, if present, is executed\nand the loop terminates.\n\nA "break" statement executed in the first suite terminates the loop\nwithout executing the "else" clause\'s suite. A "continue" statement\nexecuted in the first suite skips the rest of the suite and goes back\nto testing the expression.\n',
'with':u'\nThe "with" statement\n********************\n\nThe "with" statement is used to wrap the execution of a block with\nmethods defined by a context manager (see section *With Statement\nContext Managers*). This allows common "try"..."except"..."finally"\nusage patterns to be encapsulated for convenient reuse.\n\n with_stmt ::= "with" with_item ("," with_item)* ":" suite\n with_item ::= expression ["as" target]\n\nThe execution of the "with" statement with one "item" proceeds as\nfollows:\n\n1. The context expression (the expression given in the "with_item")\n is evaluated to obtain a context manager.\n\n2. The context manager\'s "__exit__()" is loaded for later use.\n\n3. The context manager\'s "__enter__()" method is invoked.\n\n4. If a target was included in the "with" statement, the return\n value from "__enter__()" is assigned to it.\n\n Note: The "with" statement guarantees that if the "__enter__()"\n method returns without an error, then "__exit__()" will always be\n called. Thus, if an error occurs during the assignment to the\n target list, it will be treated the same as an error occurring\n within the suite would be. See step 6 below.\n\n5. The suite is executed.\n\n6. The context manager\'s "__exit__()" method is invoked. If an\n exception caused the suite to be exited, its type, value, and\n traceback are passed as arguments to "__exit__()". Otherwise, three\n"None" arguments are supplied.\n\n If the suite was exited due to an exception, and the return value\n from the "__exit__()" method was false, the exception is reraised.\n If the return value was true, the exception is suppressed, and\n execution continues with the statement following the "with"\n statement.\n\n If the suite was exited for any reason other than an exception, the\n return value from "__exit__()" is ignored, and execution proceeds\n at the normal location for the kind of exit that was taken.\n\nWith more than one item, the context managers are processed as if\nmultiple "with" statements were nested:\n\n with A() as a, B() as b:\n suite\n\nis equivalent to\n\n with A() as a:\n with B() as b:\n suite\n\nChanged in version 3.1: Support for multiple context expressions.\n\nSee also: **PEP 0343** - The "with" statement\n\n The specification, background, and examples for the Python "with"\n statement.\n',
'yield':u'\nThe "yield" statement\n*********************\n\n yield_stmt ::= yield_expression\n\nA "yield" statement is semantically equivalent to a *yield\nexpression*. The yield statement can be used to omit the parentheses\nthat would otherwise be required in the equivalent yield expression\nstatement. For example, the yield statements\n\n yield <expr>\n yield from <expr>\n\nare equivalent to the yield expression statements\n\n (yield <expr>)\n (yield from <expr>)\n\nYield expressions and statements are only used when defining a\n*generator* function, and are only used in the body of the generator\nfunction. Using yield in a function definition is sufficient to cause\nthat definition to create a generator function instead of a normal\nfunction.\n\nFor full details of "yield" semantics, refer to the *Yield\nexpressions* section.\n'}
