cpython/Modules/Setup.in

400 lines
14 KiB
Plaintext
Raw Normal View History

# -*- makefile -*-
# The file Setup is used by the makesetup script to construct the files
# Makefile and config.c, from Makefile.pre and config.c.in,
# respectively. The file Setup itself is initially copied from
# Setup.in; once it exists it will not be overwritten, so you can edit
1995-04-10 08:37:18 -03:00
# Setup to your heart's content. Note that Makefile.pre is created
# from Makefile.pre.in by the toplevel configure script.
# (VPATH notes: Setup and Makefile.pre are in the build directory, as
1995-04-10 08:37:18 -03:00
# are Makefile and config.c; the *.in files are in the source
# directory.)
1994-01-01 20:26:09 -04:00
# Each line in this file describes one or more optional modules.
# Comment out lines to suppress modules.
# Lines have the following structure:
#
# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]
1994-01-01 20:26:09 -04:00
#
# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)
1994-01-01 20:26:09 -04:00
# <cpparg> is anything starting with -I, -D, -U or -C
# <library> is anything ending in .a or beginning with -l or -L
# <module> is anything else but should be a valid Python
# identifier (letters, digits, underscores, beginning with non-digit)
#
# (As the makesetup script changes, it may recognize some other
# arguments as well, e.g. *.so and *.sl as libraries. See the big
# case statement in the makesetup script.)
#
1994-01-01 20:26:09 -04:00
# Lines can also have the form
#
# <name> = <value>
#
# which defines a Make variable definition inserted into Makefile.in
1994-09-12 07:42:20 -03:00
#
# Finally, if a line contains just the word "*shared*" (without the
# quotes but with the stars), then the following modules will not be
# included in the config.c file, nor in the list of objects to be
# added to the library archive, and their linker options won't be
# added to the linker options, but rules to create their .o files and
# their shared libraries will still be added to the Makefile, and
# their names will be collected in the Make variable SHAREDMODS. This
# is used to build modules as shared libraries. (They must be
# installed using "make sharedinstall".) (For compatibility,
# *noconfig* has the same effect as *shared*.)
1994-01-01 20:26:09 -04:00
# NOTE: As a standard policy, as many modules as can be supported by a
# platform should be present. The distribution comes with all modules
# enabled that are supported by most platforms and don't require you
1995-04-10 08:37:18 -03:00
# to ftp sources from elsewhere.
1994-01-01 20:26:09 -04:00
# Some special rules to define PYTHONPATH.
# Edit the definitions below to indicate which options you are using.
# Don't add any whitespace or comments!
# Directories where library files get installed.
# DESTLIB is for Python modules; MACHDESTLIB for shared libraries.
DESTLIB=$(LIBDEST)
MACHDESTLIB=$(BINLIBDEST)
# NOTE: all the paths are now relative to the prefix that is computed
# at run time!
# Standard path -- don't edit.
# No leading colon since this is the first entry.
# Empty since this is now just the runtime prefix.
DESTPATH=
1995-09-13 15:39:04 -03:00
# Site specific path components -- should begin with : if non-empty
SITEPATH=
# Standard path components for test modules
TESTPATH=:test
# Path components for machine- or system-dependent modules and shared libraries
MACHDEPPATH=:plat-$(MACHDEP)
COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(STDWINPATH)$(TKPATH)
PYTHONPATH=$(COREPYTHONPATH)
# The modules listed here can't be built as shared libraries for
# various reasons; therefore they are listed here instead of in the
# normal order.
1995-04-10 08:37:18 -03:00
# Some modules that are normally always on:
regex regexmodule.c regexpr.c # Regular expressions, GNU Emacs style
reop reopmodule.c # Additional RE support (for re1.py)
pcre pcremodule.c pypcre.c # Regular expressions, Perl style (for re.py)
posix posixmodule.c # posix (UNIX) system calls
signal signalmodule.c # signal(2)
1995-04-10 08:37:18 -03:00
# The SGI specific GL module:
1994-10-20 19:01:38 -03:00
#gl glmodule.c cgensupport.c -I$(srcdir) -lgl -lX11
# The thread module is now automatically enabled, see Setup.thread.
1994-10-20 19:01:38 -03:00
# Pure module. Cannot be linked dynamically.
# -DWITH_QUANTIFY, -DWITH_PURIFY, or -DWITH_ALL_PURE
#WHICH_PURE_PRODUCTS=-DWITH_ALL_PURE
#PURE_INCLS=-I/usr/local/include
#PURE_STUBLIBS=-L/usr/local/lib -lpurify_stubs -lquantify_stubs
#pure puremodule.c $(WHICH_PURE_PRODUCTS) $(PURE_INCLS) $(PURE_STUBLIBS)
1994-10-20 19:01:38 -03:00
# Uncommenting the following line tells makesetup that all following
1995-04-10 08:37:18 -03:00
# modules are to be built as shared libraries (see above for more
# detail):
1994-10-20 19:01:38 -03:00
#*shared*
1994-10-20 19:01:38 -03:00
# GNU readline. Unlike previous Python incarnations, GNU readline is
# now incorporated in an optional module, configured in the Setup file
# instead of by a configure script switch. You may have to insert a
# -L option pointing to the directory where libreadline.* lives,
# and you may have to change -ltermcap to -ltermlib or perhaps remove
# it, depending on your system -- see the GNU readline instructions.
# It's okay for this to be a shared library, too.
#readline readline.c -lreadline -ltermcap
1994-10-20 19:01:38 -03:00
1995-04-10 08:37:18 -03:00
# Modules that should always be present (non UNIX dependent):
1994-01-01 20:26:09 -04:00
array arraymodule.c # array objects
cmath cmathmodule.c # -lm # complex math library functions
math mathmodule.c # -lm # math library functions, e.g. sin()
strop stropmodule.c # fast string operations implemented in C
struct structmodule.c # binary structure packing/unpacking
time timemodule.c # -lm # time operations and variables
operator operator.c # operator.add() and similar goodies
1994-01-01 20:26:09 -04:00
1997-11-19 14:57:48 -04:00
#_locale _localemodule.c # access to ISO C locale support
1994-01-01 20:26:09 -04:00
1995-04-10 08:37:18 -03:00
# Modules with some UNIX dependencies -- on by default:
# (If you have a really backward UNIX, select and socket may not be
# supported...)
1994-01-01 20:26:09 -04:00
fcntl fcntlmodule.c # fcntl(2) and ioctl(2)
pwd pwdmodule.c # pwd(3)
grp grpmodule.c # grp(3)
select selectmodule.c # select(2); not on ancient System V
socket socketmodule.c # socket(2); not on ancient System V
errno errnomodule.c # posix (UNIX) errno values
1994-01-01 20:26:09 -04:00
# The crypt module is now disabled by default because it breaks builds
# on many systems (where -lcrypt is needed), e.g. Linux (I believe).
#crypt cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems
1994-01-01 20:26:09 -04:00
# Some more UNIX dependent modules -- off by default, since these
1995-04-10 08:37:18 -03:00
# are not supported by all UNIX systems:
#nis nismodule.c # Sun yellow pages -- not everywhere
1994-09-12 07:42:20 -03:00
#termios termios.c # Steen Lumholt's termios module
1996-12-18 14:37:27 -04:00
#resource resource.c # Jeremy Hylton's rlimit interface
# Multimedia modules -- off by default.
# These don't work for 64-bit platforms!!!
1995-04-10 08:37:18 -03:00
# These represent audio samples or images as strings:
1994-01-01 20:26:09 -04:00
#audioop audioop.c # Operations on audio samples
#imageop imageop.c # Operations on images
#rgbimg rgbimgmodule.c # Read SGI RGB image files (but coded portably)
1994-01-01 20:26:09 -04:00
# The stdwin module provides a simple, portable (between X11 and Mac)
# windowing interface. You need to ftp the STDWIN library, e.g. from
1995-04-10 08:37:18 -03:00
# ftp://ftp.cwi.nl/pub/stdwin. (If you get it elsewhere, be sure to
# get version 1.0 or higher!) The STDWIN variable must point to the
# STDWIN toplevel directory.
1995-04-10 08:37:18 -03:00
# Uncomment and edit as needed:
#STDWIN=/ufs/guido/src/stdwin
1994-01-01 20:26:09 -04:00
1995-04-10 08:37:18 -03:00
# Uncomment these lines:
#STDWINPATH=:lib-stdwin
1994-09-12 07:42:20 -03:00
#LIBTEXTEDIT=$(STDWIN)/$(MACHDEP)/Packs/textedit/libtextedit.a
#LIBX11STDWIN=$(STDWIN)/$(MACHDEP)/Ports/x11/libstdwin.a
#stdwin stdwinmodule.c -I$(STDWIN)/H $(LIBTEXTEDIT) $(LIBX11STDWIN) -lX11
1995-04-10 08:37:18 -03:00
# Use this instead of the last two lines above for alphanumeric stdwin:
#LIBALFASTDWIN=$(STDWIN)/$(MACHDEP)/Ports/alfa/libstdwin.a
1994-09-12 07:42:20 -03:00
#stdwin stdwinmodule.c -I$(STDWIN)/H $(LIBTEXTEDIT) $(LIBALFASTDWIN) -ltermcap
1994-01-01 20:26:09 -04:00
# The md5 module implements the RSA Data Security, Inc. MD5
# Message-Digest Algorithm, described in RFC 1321. The necessary files
# md5c.c and md5.h are included here.
md5 md5module.c md5c.c
1994-01-01 20:26:09 -04:00
# The mpz module interfaces to the GNU Multiple Precision library.
# You need to ftp the GNU MP library.
# The GMP variable must point to the GMP source directory.
1996-08-19 20:06:45 -03:00
# This was originally written and tested against GMP 1.2 and 1.3.2.
# It has been modified by Rob Hooft to work with 2.0.2 as well, but I
# haven't tested it recently.
1994-01-01 20:26:09 -04:00
1994-10-06 13:12:06 -03:00
# A compatible MP library unencombered by the GPL also exists. It was
# posted to comp.sources.misc in volume 40 and is widely available from
# FTP archive sites. One URL for it is:
# ftp://gatekeeper.dec.com/.b/usenet/comp.sources.misc/volume40/fgmp/part01.Z
1994-01-01 20:26:09 -04:00
#GMP=/ufs/guido/src/gmp
#mpz mpzmodule.c -I$(GMP) $(GMP)/libgmp.a
1994-01-01 20:26:09 -04:00
# SGI IRIX specific modules -- off by default.
1994-10-20 19:01:38 -03:00
1995-04-10 08:37:18 -03:00
# These module work on any SGI machine:
1994-01-01 20:26:09 -04:00
# *** gl must be enabled higher up in this file ***
1994-10-20 19:01:38 -03:00
#fm fmmodule.c -lfm -lgl # Font Manager
#sgi sgimodule.c # sgi.nap() and a few more
# This module requires the header file
1995-04-10 08:37:18 -03:00
# /usr/people/4Dgifts/iristools/include/izoom.h:
#imgfile imgfile.c -limage -lgutil -lgl -lm # Image Processing Utilities
1994-10-20 19:01:38 -03:00
1995-04-10 08:37:18 -03:00
# These modules require the Multimedia Development Option (I think):
1994-10-20 19:01:38 -03:00
#al almodule.c -laudio # Audio Library
#cd cdmodule.c -lcdaudio -lds -lmediad # CD Audio Library
#cl clmodule.c -lcl -lawareaudio # Compression Library
#sv svmodule.c yuvconvert.c -lsvideo -lXext -lX11 # Starter Video
1994-01-01 20:26:09 -04:00
# The FORMS library, by Mark Overmars, implements user interface
# components such as dialogs and buttons using SGI's GL and FM
# libraries. You must ftp the FORMS library separately from
# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a.
# The FORMS variable must point to the FORMS subdirectory of the forms
1995-04-10 08:37:18 -03:00
# toplevel directory:
1994-01-01 20:26:09 -04:00
#FORMS=/ufs/guido/src/forms/FORMS
#fl flmodule.c -I$(FORMS) $(FORMS)/libforms.a -lfm -lgl
1994-01-01 20:26:09 -04:00
1995-04-10 08:37:18 -03:00
# SunOS specific modules -- off by default:
1994-01-01 20:26:09 -04:00
#sunaudiodev sunaudiodev.c
1994-01-01 20:26:09 -04:00
1995-04-10 08:37:18 -03:00
# George Neville-Neil's timing module:
#timing timingmodule.c
# The _tkinter module.
#
# The TKPATH variable is always enabled, to save you the effort.
TKPATH=:lib-tk
# The command for _tkinter is long and site specific. Please
# uncomment and/or edit those parts as indicated. If you don't have a
# specific extension (e.g. Tix or BLT), leave the corresponding line
# commented out. (Leave the trailing backslashes in! If you
# experience strange errors, you may want to join all uncommented
# lines and remove the backslashes -- the backslash interpretation is
# done by the shell's "read" command and it may not be implemented on
# every system.
# *** Always uncomment this (leave the leading underscore in!):
# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
# *** Uncomment and edit to reflect where your X11 header files are:
# -I/usr/X11R6/include \
# *** Or uncomment this for Solaris:
# -I/usr/openwin/include \
# *** Uncomment and edit to reflect where your Tcl/Tk headers are:
# -I/usr/local/include \
# *** Uncomment and edit for Tix extension only:
# -DWITH_TIX -ltix4.1.8.0 \
# *** Uncomment and edit for BLT extension only:
# -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
# *** Uncomment and edit for PIL (TkImaging) extension only:
# -DWITH_PIL -I../Extensions/Imaging/libImaging tkImaging.c \
# *** Uncomment and edit for TOGL extension only:
# -DWITH_TOGL togl.c \
# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
# -L/usr/local/lib \
# *** Uncomment and edit to reflect your Tcl/Tk versions:
# -ltk8.0 -ltcl8.0 \
# *** Uncomment and edit to reflect where your X11 libraries are:
# -L/usr/X11R6/lib \
# *** Or uncomment this for Solaris:
# -L/usr/openwin/lib \
# *** Uncomment these for TOGL extension only:
# -lGL -lGLU -lXext -lXmu \
# *** Uncomment for AIX:
# -lld \
# *** Always uncomment this; X11 libraries to link with:
# -lX11
1995-04-10 08:37:18 -03:00
# Lance Ellinghaus's modules:
rotor rotormodule.c # enigma-inspired encryption
#syslog syslogmodule.c # syslog daemon interface
1995-07-26 14:31:41 -03:00
# Lance's curses module. This requires the System V version of
# curses, sometimes known as ncurses (e.g. on Linux, link with
# -lncurses instead of -lcurses; on SunOS 4.1.3, insert -I/usr/5include
# -L/usr/5lib before -lcurses).
1995-07-26 14:31:41 -03:00
#curses cursesmodule.c -lcurses -ltermcap
1995-04-10 08:37:18 -03:00
# Tommy Burnette's 'new' module (creates new empty objects of certain kinds):
#new newmodule.c
1995-01-12 07:29:01 -04:00
# Generic (SunOS / SVR4) dynamic loading module.
# This is not needed for dynamic loading of Python modules --
# it is a highly experimental and dangerous device for calling
1995-04-10 08:37:18 -03:00
# *arbitrary* C functions in *arbitrary* shared libraries:
#dl dlmodule.c
# Modules that provide persistent dictionary-like semantics. You will
# probably want to arrange for at least one of them to be available on
# your machine, though none are defined by default because of library
# dependencies. The Python module anydbm.py provides an
# implementation independent wrapper for these; dumbdbm.py provides
# similar functionality (but slower of course) implemented in Python.
# The standard Unix dbm module:
#dbm dbmmodule.c # dbm(3) may require -lndbm or similar
# Anthony Baxter's gdbm module. GNU dbm(3) will require -lgdbm:
#gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
1994-01-01 20:26:09 -04:00
1995-08-27 23:59:06 -03:00
# Berkeley DB interface.
#
# This requires the Berkeley DB code, see
# ftp://ftp.cs.berkeley.edu/pub/4bsd/db.1.85.tar.gz
#
# Edit the variables DB and DBPORT to point to the db top directory
# and the subdirectory of PORT where you built it.
1997-08-04 23:25:24 -03:00
#
# (See http://www.jenkon-dev.com/~rd/python/ for an interface to
# BSD DB 2.1.0.)
1996-07-23 21:42:42 -03:00
#DB=/depot/sundry/src/berkeley-db/db.1.85
#DBPORT=$(DB)/PORT/irix.5.3
#bsddb bsddbmodule.c -I$(DBPORT)/include -I$(DBPORT) $(DBPORT)/libdb.a
# David Wayne Williams' soundex module
#soundex soundex.c
# Helper module for various ascii-encoders
binascii binascii.c
# Fred Drake's interface to the Python parser
parser parsermodule.c
1997-01-11 15:29:30 -04:00
# Digital Creations' cStringIO and cPickle
cStringIO cStringIO.c
cPickle cPickle.c
1997-02-14 19:03:31 -04:00
# Lee Busby's SIGFPE modules.
# The library to link fpectl with is platform specific.
# Choose *one* of the options below for fpectl:
# For SGI IRIX (tested on 5.3):
#fpectl fpectlmodule.c -lfpe
# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2):
# (Without the compiler you don't have -lsunmath.)
#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm
1997-02-14 19:03:31 -04:00
# For other systems: see instructions in fpectlmodule.c.
#fpectl fpectlmodule.c ...
# Test module for fpectl. No extra libraries needed.
1997-02-14 19:03:31 -04:00
#fpetest fpetestmodule.c
# Andrew Kuchling's zlib module.
# This require zlib 1.0.4 (or later). See http://quest.jpl.nasa.gov/zlib/
1998-02-06 18:36:10 -04:00
# See http://www.cdrom.com/pub/infozip/zlib/
#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
1995-04-10 08:37:18 -03:00
# Example -- included for reference only:
# xx xxmodule.c