cpython/Doc/library/graphlib.rst

211 lines
8.5 KiB
ReStructuredText
Raw Normal View History

:mod:`graphlib` --- Functionality to operate with graph-like structures
=========================================================================
.. module:: graphlib
:synopsis: Functionality to operate with graph-like structures
**Source code:** :source:`Lib/graphlib.py`
.. testsetup:: default
import graphlib
from graphlib import *
--------------
.. class:: TopologicalSorter(graph=None)
Provides functionality to topologically sort a graph of hashable nodes.
A topological order is a linear ordering of the vertices in a graph such that
for every directed edge u -> v from vertex u to vertex v, vertex u comes
before vertex v in the ordering. For instance, the vertices of the graph may
represent tasks to be performed, and the edges may represent constraints that
one task must be performed before another; in this example, a topological
ordering is just a valid sequence for the tasks. A complete topological
ordering is possible if and only if the graph has no directed cycles, that
is, if it is a directed acyclic graph.
If the optional *graph* argument is provided it must be a dictionary
representing a directed acyclic graph where the keys are nodes and the values
are iterables of all predecessors of that node in the graph (the nodes that
have edges that point to the value in the key). Additional nodes can be added
to the graph using the :meth:`~TopologicalSorter.add` method.
In the general case, the steps required to perform the sorting of a given
graph are as follows:
* Create an instance of the :class:`TopologicalSorter` with an optional
initial graph.
* Add additional nodes to the graph.
* Call :meth:`~TopologicalSorter.prepare` on the graph.
* While :meth:`~TopologicalSorter.is_active` is ``True``, iterate over
the nodes returned by :meth:`~TopologicalSorter.get_ready` and
process them. Call :meth:`~TopologicalSorter.done` on each node as it
finishes processing.
In case just an immediate sorting of the nodes in the graph is required and
no parallelism is involved, the convenience method
:meth:`TopologicalSorter.static_order` can be used directly:
.. doctest::
>>> graph = {"D": {"B", "C"}, "C": {"A"}, "B": {"A"}}
>>> ts = TopologicalSorter(graph)
>>> tuple(ts.static_order())
('A', 'C', 'B', 'D')
The class is designed to easily support parallel processing of the nodes as
they become ready. For instance::
topological_sorter = TopologicalSorter()
# Add nodes to 'topological_sorter'...
topological_sorter.prepare()
while topological_sorter.is_active():
for node in topological_sorter.get_ready():
# Worker threads or processes take nodes to work on off the
# 'task_queue' queue.
task_queue.put(node)
# When the work for a node is done, workers put the node in
# 'finalized_tasks_queue' so we can get more nodes to work on.
# The definition of 'is_active()' guarantees that, at this point, at
# least one node has been placed on 'task_queue' that hasn't yet
# been passed to 'done()', so this blocking 'get()' must (eventually)
# succeed. After calling 'done()', we loop back to call 'get_ready()'
# again, so put newly freed nodes on 'task_queue' as soon as
# logically possible.
node = finalized_tasks_queue.get()
topological_sorter.done(node)
.. method:: add(node, *predecessors)
Add a new node and its predecessors to the graph. Both the *node* and all
elements in *predecessors* must be hashable.
If called multiple times with the same node argument, the set of
dependencies will be the union of all dependencies passed in.
It is possible to add a node with no dependencies (*predecessors* is not
provided) or to provide a dependency twice. If a node that has not been
provided before is included among *predecessors* it will be automatically
added to the graph with no predecessors of its own.
Raises :exc:`ValueError` if called after :meth:`~TopologicalSorter.prepare`.
.. method:: prepare()
Mark the graph as finished and check for cycles in the graph. If any cycle
is detected, :exc:`CycleError` will be raised, but
:meth:`~TopologicalSorter.get_ready` can still be used to obtain as many
nodes as possible until cycles block more progress. After a call to this
function, the graph cannot be modified, and therefore no more nodes can be
added using :meth:`~TopologicalSorter.add`.
.. method:: is_active()
Returns ``True`` if more progress can be made and ``False`` otherwise.
Progress can be made if cycles do not block the resolution and either
there are still nodes ready that haven't yet been returned by
:meth:`TopologicalSorter.get_ready` or the number of nodes marked
:meth:`TopologicalSorter.done` is less than the number that have been
returned by :meth:`TopologicalSorter.get_ready`.
The :meth:`~TopologicalSorter.__bool__` method of this class defers to
this function, so instead of::
if ts.is_active():
...
it is possible to simply do::
if ts:
...
Raises :exc:`ValueError` if called without calling
:meth:`~TopologicalSorter.prepare` previously.
.. method:: done(*nodes)
Marks a set of nodes returned by :meth:`TopologicalSorter.get_ready` as
processed, unblocking any successor of each node in *nodes* for being
returned in the future by a call to :meth:`TopologicalSorter.get_ready`.
Raises :exc:`ValueError` if any node in *nodes* has already been marked as
processed by a previous call to this method or if a node was not added to
the graph by using :meth:`TopologicalSorter.add`, if called without
calling :meth:`~TopologicalSorter.prepare` or if node has not yet been
returned by :meth:`~TopologicalSorter.get_ready`.
.. method:: get_ready()
Returns a ``tuple`` with all the nodes that are ready. Initially it
returns all nodes with no predecessors, and once those are marked as
processed by calling :meth:`TopologicalSorter.done`, further calls will
return all new nodes that have all their predecessors already processed.
Once no more progress can be made, empty tuples are returned.
Raises :exc:`ValueError` if called without calling
:meth:`~TopologicalSorter.prepare` previously.
.. method:: static_order()
Returns an iterator object which will iterate over nodes in a topological
order. When using this method, :meth:`~TopologicalSorter.prepare` and
:meth:`~TopologicalSorter.done` should not be called. This method is
equivalent to::
def static_order(self):
self.prepare()
while self.is_active():
node_group = self.get_ready()
yield from node_group
self.done(*node_group)
The particular order that is returned may depend on the specific order in
which the items were inserted in the graph. For example:
.. doctest::
>>> ts = TopologicalSorter()
>>> ts.add(3, 2, 1)
>>> ts.add(1, 0)
>>> print([*ts.static_order()])
[2, 0, 1, 3]
>>> ts2 = TopologicalSorter()
>>> ts2.add(1, 0)
>>> ts2.add(3, 2, 1)
>>> print([*ts2.static_order()])
[0, 2, 1, 3]
This is due to the fact that "0" and "2" are in the same level in the
graph (they would have been returned in the same call to
:meth:`~TopologicalSorter.get_ready`) and the order between them is
determined by the order of insertion.
If any cycle is detected, :exc:`CycleError` will be raised.
.. versionadded:: 3.9
Exceptions
----------
The :mod:`graphlib` module defines the following exception classes:
.. exception:: CycleError
Subclass of :exc:`ValueError` raised by :meth:`TopologicalSorter.prepare` if cycles exist
in the working graph. If multiple cycles exist, only one undefined choice among them will
be reported and included in the exception.
The detected cycle can be accessed via the second element in the :attr:`~CycleError.args`
attribute of the exception instance and consists in a list of nodes, such that each node is,
in the graph, an immediate predecessor of the next node in the list. In the reported list,
the first and the last node will be the same, to make it clear that it is cyclic.