cpython/Modules/Setup.dist

496 lines
18 KiB
Plaintext
Raw Normal View History

# -*- makefile -*-
# The file Setup is used by the makesetup script to construct the files
# Makefile and config.c, from Makefile.pre and config.c.in,
# respectively. The file Setup itself is initially copied from
# Setup.dist; once it exists it will not be overwritten, so you can edit
1995-04-10 08:37:18 -03:00
# Setup to your heart's content. Note that Makefile.pre is created
# from Makefile.pre.in by the toplevel configure script.
# (VPATH notes: Setup and Makefile.pre are in the build directory, as
# are Makefile and config.c; the *.in and *.dist files are in the source
# directory.)
1994-01-01 20:26:09 -04:00
# Each line in this file describes one or more optional modules.
# Modules enabled here will not be compiled by the setup.py script,
# so the file can be used to override setup.py's behavior.
1994-01-01 20:26:09 -04:00
# Lines have the following structure:
#
# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]
1994-01-01 20:26:09 -04:00
#
# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)
1994-01-01 20:26:09 -04:00
# <cpparg> is anything starting with -I, -D, -U or -C
# <library> is anything ending in .a or beginning with -l or -L
# <module> is anything else but should be a valid Python
# identifier (letters, digits, underscores, beginning with non-digit)
#
# (As the makesetup script changes, it may recognize some other
# arguments as well, e.g. *.so and *.sl as libraries. See the big
# case statement in the makesetup script.)
#
1994-01-01 20:26:09 -04:00
# Lines can also have the form
#
# <name> = <value>
#
# which defines a Make variable definition inserted into Makefile.in
1994-09-12 07:42:20 -03:00
#
# Finally, if a line contains just the word "*shared*" (without the
# quotes but with the stars), then the following modules will not be
# built statically. The build process works like this:
#
# 1. Build all modules that are declared as static in Modules/Setup,
# combine them into libpythonxy.a, combine that into python.
# 2. Build all modules that are listed as shared in Modules/Setup.
# 3. Invoke setup.py. That builds all modules that
# a) are not builtin, and
# b) are not listed in Modules/Setup, and
# c) can be build on the target
#
# Therefore, modules declared to be shared will not be
# included in the config.c file, nor in the list of objects to be
# added to the library archive, and their linker options won't be
# added to the linker options. Rules to create their .o files and
# their shared libraries will still be added to the Makefile, and
# their names will be collected in the Make variable SHAREDMODS. This
1998-10-07 11:41:54 -03:00
# is used to build modules as shared libraries. (They can be
# installed using "make sharedinstall", which is implied by the
# toplevel "make install" target.) (For compatibility,
# *noconfig* has the same effect as *shared*.)
1999-02-22 14:11:18 -04:00
#
# In addition, *static* explicitly declares the following modules to
# be static. Lines containing "*static*" and "*shared*" may thus
# alternate throughout this file.
1994-01-01 20:26:09 -04:00
# NOTE: As a standard policy, as many modules as can be supported by a
# platform should be present. The distribution comes with all modules
# enabled that are supported by most platforms and don't require you
1995-04-10 08:37:18 -03:00
# to ftp sources from elsewhere.
1994-01-01 20:26:09 -04:00
# Some special rules to define PYTHONPATH.
# Edit the definitions below to indicate which options you are using.
# Don't add any whitespace or comments!
# Directories where library files get installed.
# DESTLIB is for Python modules; MACHDESTLIB for shared libraries.
DESTLIB=$(LIBDEST)
MACHDESTLIB=$(BINLIBDEST)
# NOTE: all the paths are now relative to the prefix that is computed
# at run time!
# Standard path -- don't edit.
# No leading colon since this is the first entry.
# Empty since this is now just the runtime prefix.
DESTPATH=
1995-09-13 15:39:04 -03:00
# Site specific path components -- should begin with : if non-empty
SITEPATH=
# Standard path components for test modules
TESTPATH=
# Path components for machine- or system-dependent modules and shared libraries
MACHDEPPATH=:plat-$(MACHDEP)
EXTRAMACHDEPPATH=
# Path component for the Tkinter-related modules
# The TKPATH variable is always enabled, to save you the effort.
TKPATH=:lib-tk
# Path component for old modules.
OLDPATH=:lib-old
COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(EXTRAMACHDEPPATH)$(TKPATH)$(OLDPATH)
PYTHONPATH=$(COREPYTHONPATH)
# The modules listed here can't be built as shared libraries for
# various reasons; therefore they are listed here instead of in the
# normal order.
# This only contains the minimal set of modules required to run the
# setup.py script in the root of the Python source tree.
posix posixmodule.c # posix (UNIX) system calls
errno errnomodule.c # posix (UNIX) errno values
pwd pwdmodule.c # this is needed to find out the user's home dir
# if $HOME is not set
_sre _sre.c # Fredrik Lundh's new regular expressions
_codecs _codecsmodule.c # access to the builtin codecs and codec registry
# The zipimport module is always imported at startup. Having it as a
# builtin module avoids some bootstrapping problems and reduces overhead.
zipimport zipimport.c
# The rest of the modules listed in this file are all commented out by
# default. Usually they can be detected and built as dynamically
# loaded modules by the new setup.py script added in Python 2.1. If
# you're on a platform that doesn't support dynamic loading, want to
# compile modules statically into the Python binary, or need to
# specify some odd set of compiler switches, you can uncomment the
# appropriate lines below.
# ======================================================================
# The Python symtable module depends on .h files that setup.py doesn't track
_symtable symtablemodule.c
# The SGI specific GL module:
GLHACK=-Dclear=__GLclear
#gl glmodule.c cgensupport.c -I$(srcdir) $(GLHACK) -lgl -lX11
# Pure module. Cannot be linked dynamically.
# -DWITH_QUANTIFY, -DWITH_PURIFY, or -DWITH_ALL_PURE
#WHICH_PURE_PRODUCTS=-DWITH_ALL_PURE
#PURE_INCLS=-I/usr/local/include
#PURE_STUBLIBS=-L/usr/local/lib -lpurify_stubs -lquantify_stubs
#pure puremodule.c $(WHICH_PURE_PRODUCTS) $(PURE_INCLS) $(PURE_STUBLIBS)
# Uncommenting the following line tells makesetup that all following
# modules are to be built as shared libraries (see above for more
# detail; also note that *static* reverses this effect):
#*shared*
# GNU readline. Unlike previous Python incarnations, GNU readline is
# now incorporated in an optional module, configured in the Setup file
# instead of by a configure script switch. You may have to insert a
# -L option pointing to the directory where libreadline.* lives,
# and you may have to change -ltermcap to -ltermlib or perhaps remove
# it, depending on your system -- see the GNU readline instructions.
# It's okay for this to be a shared library, too.
#readline readline.c -lreadline -ltermcap
# Modules that should always be present (non UNIX dependent):
#array arraymodule.c # array objects
#cmath cmathmodule.c # -lm # complex math library functions
#math mathmodule.c # -lm # math library functions, e.g. sin()
#_struct _struct.c # binary structure packing/unpacking
#time timemodule.c # -lm # time operations and variables
#operator operator.c # operator.add() and similar goodies
#_weakref _weakref.c # basic weak reference support
#_testcapi _testcapimodule.c # Python C API test module
#_random _randommodule.c # Random number generator
#_collections _collectionsmodule.c # Container types
#itertools itertoolsmodule.c # Functions creating iterators for efficient looping
#strop stropmodule.c # String manipulations
2008-11-23 09:53:03 -04:00
#_functools _functoolsmodule.c # Tools for working with functions and callable objects
#_elementtree -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI _elementtree.c # elementtree accelerator
#_pickle _pickle.c # pickle accelerator
#datetime datetimemodule.c # date/time type
#_bisect _bisectmodule.c # Bisection algorithms
#unicodedata unicodedata.c # static Unicode character database
# access to ISO C locale support
#_locale _localemodule.c # -lintl
# Modules with some UNIX dependencies -- on by default:
# (If you have a really backward UNIX, select and socket may not be
# supported...)
#fcntl fcntlmodule.c # fcntl(2) and ioctl(2)
#spwd spwdmodule.c # spwd(3)
#grp grpmodule.c # grp(3)
#select selectmodule.c # select(2); not on ancient System V
# Memory-mapped files (also works on Win32).
#mmap mmapmodule.c
2003-03-20 19:37:24 -04:00
# CSV file helper
#_csv _csv.c
# Socket module helper for socket(2)
#_socket socketmodule.c
# Socket module helper for SSL support; you must comment out the other
# socket line above, and possibly edit the SSL variable:
#SSL=/usr/local/ssl
#_ssl _ssl.c \
# -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
# -L$(SSL)/lib -lssl -lcrypto
# The crypt module is now disabled by default because it breaks builds
# on many systems (where -lcrypt is needed), e.g. Linux (I believe).
#
# First, look at Setup.config; configure may have set this for you.
#crypt cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems
# Some more UNIX dependent modules -- off by default, since these
# are not supported by all UNIX systems:
#nis nismodule.c -lnsl # Sun yellow pages -- not everywhere
#termios termios.c # Steen Lumholt's termios module
#resource resource.c # Jeremy Hylton's rlimit interface
# Multimedia modules -- off by default.
# These don't work for 64-bit platforms!!!
# #993173 says audioop works on 64-bit platforms, though.
# These represent audio samples or images as strings:
#audioop audioop.c # Operations on audio samples
#imageop imageop.c # Operations on images
# Note that the _md5 and _sha modules are normally only built if the
# system does not have the OpenSSL libs containing an optimized version.
# The _md5 module implements the RSA Data Security, Inc. MD5
# Message-Digest Algorithm, described in RFC 1321. The necessary files
2006-04-03 13:59:32 -03:00
# md5.c and md5.h are included here.
#_md5 md5module.c md5.c
# The _sha module implements the SHA checksum algorithms.
# (NIST's Secure Hash Algorithms.)
#_sha shamodule.c
#_sha256 sha256module.c
#_sha512 sha512module.c
# SGI IRIX specific modules -- off by default.
# These module work on any SGI machine:
# *** gl must be enabled higher up in this file ***
#fm fmmodule.c $(GLHACK) -lfm -lgl # Font Manager
#sgi sgimodule.c # sgi.nap() and a few more
# This module requires the header file
# /usr/people/4Dgifts/iristools/include/izoom.h:
#imgfile imgfile.c -limage -lgutil -lgl -lm # Image Processing Utilities
# These modules require the Multimedia Development Option (I think):
#al almodule.c -laudio # Audio Library
#cd cdmodule.c -lcdaudio -lds -lmediad # CD Audio Library
#cl clmodule.c -lcl -lawareaudio # Compression Library
#sv svmodule.c yuvconvert.c -lsvideo -lXext -lX11 # Starter Video
# The FORMS library, by Mark Overmars, implements user interface
# components such as dialogs and buttons using SGI's GL and FM
# libraries. You must ftp the FORMS library separately from
# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a.
# NOTE: if you want to be able to use FORMS and curses simultaneously
# (or both link them statically into the same binary), you must
# compile all of FORMS with the cc option "-Dclear=__GLclear".
# The FORMS variable must point to the FORMS subdirectory of the forms
# toplevel directory:
#FORMS=/ufs/guido/src/forms/FORMS
#fl flmodule.c -I$(FORMS) $(GLHACK) $(FORMS)/libforms.a -lfm -lgl
# SunOS specific modules -- off by default:
#sunaudiodev sunaudiodev.c
# A Linux specific module -- off by default; this may also work on
# some *BSDs.
#linuxaudiodev linuxaudiodev.c
# George Neville-Neil's timing module:
#timing timingmodule.c
# The _tkinter module.
#
# The command for _tkinter is long and site specific. Please
# uncomment and/or edit those parts as indicated. If you don't have a
# specific extension (e.g. Tix or BLT), leave the corresponding line
# commented out. (Leave the trailing backslashes in! If you
# experience strange errors, you may want to join all uncommented
# lines and remove the backslashes -- the backslash interpretation is
# done by the shell's "read" command and it may not be implemented on
# every system.
# *** Always uncomment this (leave the leading underscore in!):
# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
# -L/usr/local/lib \
# *** Uncomment and edit to reflect where your Tcl/Tk headers are:
# -I/usr/local/include \
# *** Uncomment and edit to reflect where your X11 header files are:
# -I/usr/X11R6/include \
# *** Or uncomment this for Solaris:
# -I/usr/openwin/include \
# *** Uncomment and edit for Tix extension only:
# -DWITH_TIX -ltix8.1.8.2 \
# *** Uncomment and edit for BLT extension only:
# -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
# *** Uncomment and edit for PIL (TkImaging) extension only:
# (See http://www.pythonware.com/products/pil/ for more info)
# -DWITH_PIL -I../Extensions/Imaging/libImaging tkImaging.c \
# *** Uncomment and edit for TOGL extension only:
# -DWITH_TOGL togl.c \
# *** Uncomment and edit to reflect your Tcl/Tk versions:
# -ltk8.2 -ltcl8.2 \
# *** Uncomment and edit to reflect where your X11 libraries are:
# -L/usr/X11R6/lib \
# *** Or uncomment this for Solaris:
# -L/usr/openwin/lib \
# *** Uncomment these for TOGL extension only:
# -lGL -lGLU -lXext -lXmu \
# *** Uncomment for AIX:
# -lld \
# *** Always uncomment this; X11 libraries to link with:
# -lX11
2004-08-31 10:50:12 -03:00
# Lance Ellinghaus's syslog module
#syslog syslogmodule.c # syslog daemon interface
# Curses support, requring the System V version of curses, often
# provided by the ncurses library. e.g. on Linux, link with -lncurses
# instead of -lcurses).
#
# First, look at Setup.config; configure may have set this for you.
#_curses _cursesmodule.c -lcurses -ltermcap
# Wrapper for the panel library that's part of ncurses and SYSV curses.
#_curses_panel _curses_panel.c -lpanel -lncurses
# Generic (SunOS / SVR4) dynamic loading module.
# This is not needed for dynamic loading of Python modules --
# it is a highly experimental and dangerous device for calling
# *arbitrary* C functions in *arbitrary* shared libraries:
#dl dlmodule.c
# Modules that provide persistent dictionary-like semantics. You will
# probably want to arrange for at least one of them to be available on
# your machine, though none are defined by default because of library
# dependencies. The Python module anydbm.py provides an
# implementation independent wrapper for these; dumbdbm.py provides
# similar functionality (but slower of course) implemented in Python.
# The standard Unix dbm module has been moved to Setup.config so that
# it will be compiled as a shared library by default. Compiling it as
# a built-in module causes conflicts with the pybsddb3 module since it
# creates a static dependency on an out-of-date version of db.so.
#
# First, look at Setup.config; configure may have set this for you.
#dbm dbmmodule.c # dbm(3) may require -lndbm or similar
# Anthony Baxter's gdbm module. GNU dbm(3) will require -lgdbm:
#
# First, look at Setup.config; configure may have set this for you.
#gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
# Sleepycat Berkeley DB interface.
#
# This requires the Sleepycat DB code, see http://www.sleepycat.com/
# The earliest supported version of that library is 3.0, the latest
# supported version is 4.0 (4.1 is specifically not supported, as that
# changes the semantics of transactional databases). A list of available
# releases can be found at
#
# http://www.sleepycat.com/update/index.html
#
# Edit the variables DB and DBLIBVERto point to the db top directory
# and the subdirectory of PORT where you built it.
#DB=/usr/local/BerkeleyDB.4.0
#DBLIBVER=4.0
#DBINC=$(DB)/include
#DBLIB=$(DB)/lib
2003-05-26 18:19:47 -03:00
#_bsddb _bsddb.c -I$(DBINC) -L$(DBLIB) -ldb-$(DBLIBVER)
# Historical Berkeley DB 1.85
#
# This module is deprecated; the 1.85 version of the Berkeley DB library has
# bugs that can cause data corruption. If you can, use later versions of the
# library instead, available from <http://www.sleepycat.com/>.
#DB=/depot/sundry/src/berkeley-db/db.1.85
#DBPORT=$(DB)/PORT/irix.5.3
#bsddb185 bsddbmodule.c -I$(DBPORT)/include -I$(DBPORT) $(DBPORT)/libdb.a
# Helper module for various ascii-encoders
#binascii binascii.c
# Fred Drake's interface to the Python parser
#parser parsermodule.c
# cStringIO and cPickle
#cStringIO cStringIO.c
#cPickle cPickle.c
# Lee Busby's SIGFPE modules.
# The library to link fpectl with is platform specific.
# Choose *one* of the options below for fpectl:
# For SGI IRIX (tested on 5.3):
#fpectl fpectlmodule.c -lfpe
# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2):
# (Without the compiler you don't have -lsunmath.)
#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm
# For other systems: see instructions in fpectlmodule.c.
#fpectl fpectlmodule.c ...
# Test module for fpectl. No extra libraries needed.
#fpetest fpetestmodule.c
# Andrew Kuchling's zlib module.
# This require zlib 1.1.3 (or later).
# See http://www.gzip.org/zlib/
#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
# Interface to the Expat XML parser
#
# Expat was written by James Clark and is now maintained by a group of
# developers on SourceForge; see www.libexpat.org for more
# information. The pyexpat module was written by Paul Prescod after a
# prototype by Jack Jansen. Source of Expat 1.95.2 is included in
# Modules/expat/. Usage of a system shared libexpat.so/expat.dll is
# not advised.
#
# More information on Expat can be found at www.libexpat.org.
#
2008-11-27 03:47:39 -04:00
#pyexpat expat/xmlparse.c expat/xmlrole.c expat/xmltok.c pyexpat.c -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI
# Hye-Shik Chang's CJKCodecs
# multibytecodec is required for all the other CJK codec modules
#_multibytecodec cjkcodecs/multibytecodec.c
#_codecs_cn cjkcodecs/_codecs_cn.c
#_codecs_hk cjkcodecs/_codecs_hk.c
#_codecs_iso2022 cjkcodecs/_codecs_iso2022.c
#_codecs_jp cjkcodecs/_codecs_jp.c
#_codecs_kr cjkcodecs/_codecs_kr.c
#_codecs_tw cjkcodecs/_codecs_tw.c
# Example -- included for reference only:
# xx xxmodule.c
2001-08-02 01:15:00 -03:00
# Another example -- the 'xxsubtype' module shows C-level subtyping in action
xxsubtype xxsubtype.c