ardupilot/libraries/AP_SpdHgtControl/AP_SpdHgtControl.h

79 lines
2.2 KiB
C++

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: t -*-
/// @file AP_SpdHgtControl.h
/// @brief generic speed & height controller interface
/*
This defines a generic interface for speed & height controllers. Each
specific controller should be a subclass of this generic
interface. All variables used by controllers should be in their
own class.
*/
#ifndef AP_SPDHGTCONTROL_H
#define AP_SPDHGTCONTROL_H
#include <AP_Common.h>
#include <AP_Param.h>
#include <DataFlash.h>
class AP_SpdHgtControl {
public:
// Update the internal state of the height and height rate estimator
// Update of the inertial speed rate estimate internal state
// Should be called at 50Hz or faster
virtual void update_50hz(float height_above_field) = 0;
/**
stages of flight so the altitude controller can choose to
prioritise height or speed
*/
enum FlightStage {
FLIGHT_NORMAL = 1,
FLIGHT_TAKEOFF = 2,
FLIGHT_LAND_APPROACH = 3,
FLIGHT_LAND_FINAL = 4
};
// Update of the pitch and throttle demands
// Should be called at 10Hz or faster
virtual void update_pitch_throttle( int32_t hgt_dem_cm,
int32_t EAS_dem_cm,
enum FlightStage flight_stage,
int32_t ptchMinCO_cd,
int16_t throttle_nudge,
float hgt_afe) = 0;
// demanded throttle in percentage
// should return 0 to 100
virtual int32_t get_throttle_demand(void)=0;
// demanded pitch angle in centi-degrees
// should return -9000 to +9000
virtual int32_t get_pitch_demand(void)=0;
// Rate of change of velocity along X body axis in m/s^2
virtual float get_VXdot(void)=0;
// log data on internal state of the controller. Called at 10Hz
virtual void log_data(DataFlash_Class &dataflash, uint8_t msgid) = 0;
// return current target airspeed
virtual float get_target_airspeed(void) const = 0;
// return maximum climb rate
virtual float get_max_climbrate(void) const = 0;
// add new controllers to this enum. Users can then
// select which controller to use by setting the
// SPDHGT_CONTROLLER parameter
enum ControllerType {
CONTROLLER_TECS = 1
};
};
#endif // AP_SPDHGTCONTROL_H