ardupilot/libraries/AP_HAL_ChibiOS/hwdef/BirdCANdy/hwdef.dat

129 lines
2.5 KiB
Plaintext

# hw definition file for processing by chibios_pins.py
# hardware repository: https://github.com/FlyfocusUAV/Bird-CANdy
# MCU class and specific type
# note: the device is STM32F412CE, not all F412 pins are available
MCU STM32F4xx STM32F412Rx
# bootloader starts firmware at 64k
FLASH_RESERVE_START_KB 64
# store parameters in pages 2 and 3
STORAGE_FLASH_PAGE 2
define HAL_STORAGE_SIZE 8192
# board ID for firmware load
APJ_BOARD_ID 1044
# setup build for a peripheral firmware
env AP_PERIPH 1
STM32_ST_USE_TIMER 5
# enable watchdog
# crystal frequency
OSCILLATOR_HZ 16000000
define CH_CFG_ST_FREQUENCY 1000000
FLASH_SIZE_KB 512
# order of UARTs
SERIAL_ORDER EMPTY EMPTY EMPTY EMPTY EMPTY USART6
# ------ RCOUT pins ------
PA15 TIM2_CH1 TIM2 PWM(1) GPIO(50)
PB3 TIM2_CH2 TIM2 PWM(2) GPIO(51)
PB4 TIM3_CH1 TIM3 PWM(3) GPIO(52)
PB5 TIM3_CH2 TIM3 PWM(4) GPIO(53)
# ------ alternate functions for RCOUT pins ------
# CANdy pins 10, 11
# USART1 for debug
# PA15 USART1_TX USART1
# PB3 USART1_RX USART1
# define HAL_SERIAL0_BAUD_DEFAULT 57600
# ------ end RCOUT pins ------
# CANdy pins 15, 16
# USART6 for GPS
PA11 USART6_TX USART6
PA12 USART6_RX USART6
# SWD debugging
PA13 JTMS-SWDIO SWD
PA14 JTCK-SWCLK SWD
# CANdy pins 21, 22
PB7 I2C1_SDA I2C1
PB6 I2C1_SCL I2C1
define HAL_USE_I2C TRUE
define STM32_I2C_USE_I2C1 TRUE
define HAL_I2C_CLEAR_ON_TIMEOUT 0
define HAL_I2C_INTERNAL_MASK 0
# only one I2C bus
I2C_ORDER I2C1
define HAL_BARO_ALLOW_INIT_NO_BARO
define HAL_USE_ADC FALSE
define STM32_ADC_USE_ADC1 FALSE
define HAL_DISABLE_ADC_DRIVER TRUE
define HAL_NO_GPIO_IRQ
# avoid RCIN thread to save memory
define HAL_NO_RCIN_THREAD
define HAL_USE_RTC FALSE
define DISABLE_SERIAL_ESC_COMM TRUE
define DMA_RESERVE_SIZE 0
define HAL_DISABLE_LOOP_DELAY
# enable CAN support
PB8 CAN1_RX CAN1
PB9 CAN1_TX CAN1
PB2 GPIO_CAN1_SILENT OUTPUT PUSHPULL SPEED_LOW LOW
define CAN_APP_NODE_NAME "org.ardupilot.birdcandy"
define HAL_GCS_ENABLED 0
define HAL_NO_LOGGING
define HAL_NO_MONITOR_THREAD
define HAL_DEVICE_THREAD_STACK 768
define AP_PARAM_MAX_EMBEDDED_PARAM 0
# disable dual GPS and GPS blending to save flash space
define GPS_MAX_RECEIVERS 1
define GPS_MAX_INSTANCES 1
define HAL_COMPASS_MAX_SENSORS 1
# RCOU+GPS+MAG+BARO+Buzzer+NeoPixels
define HAL_PERIPH_ENABLE_RC_OUT
define HAL_PERIPH_ENABLE_GPS
define HAL_PERIPH_ENABLE_MAG
define HAL_PERIPH_ENABLE_BARO
define HAL_PERIPH_ENABLE_BUZZER
define HAL_PERIPH_NEOPIXEL_COUNT 8
define HAL_PERIPH_NEOPIXEL_CHAN 0
define AP_PERIPH_LED_BRIGHT_DEFAULT 50