mirror of https://github.com/ArduPilot/ardupilot
148 lines
7.8 KiB
Lua
148 lines
7.8 KiB
Lua
-- This script helps vehicles move between GPS and Non-GPS environments using GPS and Wheel Encoders
|
|
--
|
|
-- setup RCx_OPTION = 90 (EKF Pos Source) to select the source (low=primary, middle=secondary, high=tertiary)
|
|
-- setup RCx_OPTION = 300 (Scripting1). When this switch is pulled high, the source will be automatically selected
|
|
-- setup EK3_SRCn_ parameters so that GPS is the primary source, WheelEncoders are the secondary
|
|
--
|
|
-- When the auxiliary switch (ZigZag Auto) is pulled high automatic source selection uses these thresholds:
|
|
-- SCR_USER2 holds the threshold for GPS speed accuracy (around 0.3 is a good choice)
|
|
-- SCR_USER3 holds the threshold for GPS innovations (around 0.3 is a good choice)
|
|
-- if GPS speed accuracy <= SCR_USER2 and GPS innovations <= SRC_USER3 then the GPS (primary source set) will be used
|
|
-- otherwise wheel encoders (secondary source set) will be used
|
|
-- luacheck: only 0
|
|
|
|
local source_prev = 0 -- previous source, defaults to primary source
|
|
local sw_source_prev = -1 -- previous source switch position
|
|
local sw_auto_pos_prev = -1 -- previous auto source switch position
|
|
local auto_switch = false -- true when auto switching between sources is active
|
|
local gps_usable_accuracy = 1.0 -- GPS is usable if speed accuracy is at or below this value
|
|
local vote_counter_max = 20 -- when a vote counter reaches this number (i.e. 2sec) source may be switched
|
|
local gps_vs_nongps_vote = 0 -- vote counter for GPS vs NonGPS (-20 = GPS, +20 = NonGPS)
|
|
|
|
-- play tune on buzzer to alert user to change in active source set
|
|
function play_source_tune(source)
|
|
if (source) then
|
|
if (source == 0) then
|
|
notify:play_tune("L8C") -- one long lower tone
|
|
elseif (source == 1) then
|
|
notify:play_tune("L12DD") -- two fast medium tones
|
|
elseif (source == 2) then
|
|
notify:play_tune("L16FFF") -- three very fast, high tones
|
|
end
|
|
end
|
|
end
|
|
|
|
-- the main update function
|
|
function update()
|
|
|
|
-- check switches are configured
|
|
-- at least one switch must be set
|
|
-- source selection from RCx_FUNCTION = 90 (EKF Source Select)
|
|
-- auto source from RCx_FUNCTION = 300 (Scripting1)
|
|
local rc_function_source = rc:find_channel_for_option(90)
|
|
local rc_function_auto = rc:find_channel_for_option(300)
|
|
if (rc_function_source == nil) and (rc_function_auto == nil) then
|
|
gcs:send_text(0, "ahrs-source-gps-wheelencoders.lua: RCx_FUNCTION=90 or 300 not set!")
|
|
return update, 1000
|
|
end
|
|
|
|
-- check GPS speed accuracy threshold has been set
|
|
local gps_speedaccuracy_thresh = param:get('SCR_USER2') -- SCR_USER2 holds GPS speed accuracy threshold
|
|
if (gps_speedaccuracy_thresh == nil) or (gps_speedaccuracy_thresh <= 0) then
|
|
gcs:send_text(0, "ahrs-source-gps-wheelencoders.lua: set SCR_USER2 to GPS speed accuracy threshold")
|
|
return update, 1000
|
|
end
|
|
|
|
-- check GPS innovation threshold has been set
|
|
local gps_innov_thresh = param:get('SCR_USER3') -- SCR_USER3 holds GPS velocity innovation
|
|
if (gps_innov_thresh == nil) or (gps_innov_thresh <= 0) then
|
|
gcs:send_text(0, "ahrs-source-gps-wheelencoders.lua: set SCR_USER3 to GPS innovation threshold")
|
|
return update, 1000
|
|
end
|
|
|
|
-- check if GPS speed accuracy is over threshold
|
|
local gps_speed_accuracy = gps:speed_accuracy(gps:primary_sensor())
|
|
local gps_over_threshold = (gps_speed_accuracy == nil) or (gps:speed_accuracy(gps:primary_sensor()) > gps_speedaccuracy_thresh)
|
|
|
|
-- get GPS innovations from ahrs
|
|
local gps_innov = Vector3f()
|
|
local gps_var = Vector3f()
|
|
gps_innov, gps_var = ahrs:get_vel_innovations_and_variances_for_source(3)
|
|
local gps_innov_over_threshold = (gps_innov == nil) or (gps_innov:z() == 0.0) or (math.abs(gps_innov:z()) > gps_innov_thresh)
|
|
|
|
-- automatic selection logic --
|
|
|
|
-- GPS vs NonGPS vote. "-1" to move towards GPS, "+1" to move to Non-GPS
|
|
if (not gps_over_threshold) and (not gps_innov_over_threshold) then
|
|
-- vote for GPS if GPS accuracy good AND innovations are low
|
|
gps_vs_nongps_vote = math.max(gps_vs_nongps_vote - 1, -vote_counter_max)
|
|
else
|
|
-- otherwise vote for NonGPS (wheel encoders)
|
|
gps_vs_nongps_vote = math.min(gps_vs_nongps_vote + 1, vote_counter_max)
|
|
end
|
|
|
|
-- auto source vote collation
|
|
local auto_source = -1 -- auto source undecided if -1
|
|
if gps_vs_nongps_vote <= -vote_counter_max then
|
|
auto_source = 0 -- GPS
|
|
elseif gps_vs_nongps_vote >= vote_counter_max then
|
|
auto_source = 1 -- Non-GPS / wheel encoders
|
|
end
|
|
|
|
-- read source switch position from RCx_FUNCTION = 90 (EKF Source Select)
|
|
local sw_source_pos = rc_function_source:get_aux_switch_pos()
|
|
if sw_source_pos ~= sw_source_pos_prev then -- check for changes in source switch position
|
|
sw_source_pos_prev = sw_source_pos -- record new switch position so we can detect changes
|
|
auto_switch = false -- disable auto switching of source
|
|
if source_prev ~= sw_source_pos then -- check if switch position does not match source (there is a one-to-one mapping of switch to source)
|
|
source_prev = sw_source_pos -- record what source should now be (changed by ArduPilot vehicle code)
|
|
gcs:send_text(0, "Pilot switched to Source " .. string.format("%d", source_prev+1))
|
|
else
|
|
gcs:send_text(0, "Pilot switched but already Source " .. string.format("%d", source_prev+1))
|
|
end
|
|
play_source_tune(source_prev) -- alert user of source regardless of whether it has changed or not
|
|
end
|
|
|
|
-- read auto source switch position from RCx_FUNCTION = 300 (Scripting1)
|
|
if rc_function_auto then
|
|
local sw_auto_pos = rc_function_auto:get_aux_switch_pos()
|
|
if sw_auto_pos ~= sw_auto_pos_prev then -- check for changes in source auto switch position
|
|
sw_auto_pos_prev = sw_auto_pos -- record new switch position so we can detect changes
|
|
if sw_auto_pos == 0 then -- pilot has pulled switch low
|
|
auto_switch = false -- disable auto switching of source
|
|
if sw_source_pos ~= source_prev then -- check if source will change
|
|
source_prev = sw_source_pos -- record pilot's selected source
|
|
ahrs:set_posvelyaw_source_set(source_prev) -- switch to pilot's selected source
|
|
gcs:send_text(0, "Auto source disabled, switched to Source " .. string.format("%d", source_prev+1))
|
|
else
|
|
gcs:send_text(0, "Auto source disabled, already Source " .. string.format("%d", source_prev+1))
|
|
end
|
|
elseif sw_auto_pos == 2 then -- pilot has pulled switch high
|
|
auto_switch = true -- enable auto switching of source
|
|
if auto_source < 0 then
|
|
gcs:send_text(0, "Auto source enabled, undecided, Source " .. string.format("%d", source_prev+1))
|
|
elseif auto_source ~= source_prev then -- check if source will change
|
|
source_prev = auto_source -- record pilot's selected source
|
|
ahrs:set_posvelyaw_source_set(source_prev) -- switch to pilot's selected source
|
|
gcs:send_text(0, "Auto source enabled, switched to Source " .. string.format("%d", source_prev+1))
|
|
else
|
|
gcs:send_text(0, "Auto source enabled, already Source " .. string.format("%d", source_prev+1))
|
|
end
|
|
end
|
|
play_source_tune(source_prev)
|
|
end
|
|
end
|
|
|
|
-- auto switching
|
|
if auto_switch and (auto_source >= 0) and (auto_source ~= source_prev) then
|
|
source_prev = auto_source -- record selected source
|
|
ahrs:set_posvelyaw_source_set(source_prev) -- switch to pilot's selected source
|
|
gcs:send_text(0, "Auto switched to Source " .. string.format("%d", source_prev+1))
|
|
play_source_tune(source_prev)
|
|
end
|
|
|
|
return update, 100
|
|
end
|
|
|
|
return update()
|