mirror of https://github.com/ArduPilot/ardupilot
479 lines
11 KiB
Plaintext
479 lines
11 KiB
Plaintext
// called by 10 Hz loop
|
|
// --------------------
|
|
void update_commands(void)
|
|
{
|
|
// This function loads commands into three buffers
|
|
// when a new command is loaded, it is processed with process_XXX()
|
|
// ----------------------------------------------------------------
|
|
if((home_is_set == false) || (control_mode != AUTO)){
|
|
return; // don't do commands
|
|
}
|
|
|
|
if(control_mode == AUTO){
|
|
load_next_command();
|
|
process_next_command();
|
|
}
|
|
|
|
//verify_must();
|
|
//verify_may();
|
|
}
|
|
|
|
|
|
void load_next_command()
|
|
{
|
|
// fetch next command if it's empty
|
|
// --------------------------------
|
|
if(next_command.id == CMD_BLANK){
|
|
next_command = get_wp_with_index(wp_index+1);
|
|
if(next_command.id != CMD_BLANK){
|
|
//Serial.print("MSG fetch found new cmd from list at index: ");
|
|
//Serial.println((wp_index+1),DEC);
|
|
//Serial.print("MSG cmd id: ");
|
|
//Serial.println(next_command.id,DEC);
|
|
}
|
|
}
|
|
|
|
// If the preload failed, return or just Loiter
|
|
// generate a dynamic command for RTL
|
|
// --------------------------------------------
|
|
if(next_command.id == CMD_BLANK){
|
|
// we are out of commands!
|
|
//send_message(SEVERITY_LOW,"out of commands!");
|
|
//Serial.print("MSG out of commands, wp_index: ");
|
|
//Serial.println(wp_index,DEC);
|
|
|
|
|
|
switch (control_mode){
|
|
case LAND:
|
|
// don't get a new command
|
|
break;
|
|
|
|
default:
|
|
next_command = get_LOITER_home_wp();
|
|
//Serial.print("MSG Preload RTL cmd id: ");
|
|
//Serial.println(next_command.id,DEC);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
void process_next_command()
|
|
{
|
|
// these are waypoint/Must commands
|
|
// ---------------------------------
|
|
if (command_must_index == 0){ // no current command loaded
|
|
if (next_command.id >= 0x10 && next_command.id <= 0x1F ){
|
|
increment_WP_index();
|
|
save_command_index(); // to Recover from in air Restart
|
|
command_must_index = wp_index;
|
|
|
|
//Serial.print("MSG new command_must_id ");
|
|
//Serial.print(next_command.id,DEC);
|
|
//Serial.print(" index:");
|
|
//Serial.println(command_must_index,DEC);
|
|
if (log_bitmask & MASK_LOG_CMD)
|
|
Log_Write_Cmd(wp_index, &next_command);
|
|
process_must();
|
|
}
|
|
}
|
|
|
|
// these are May commands
|
|
// ----------------------
|
|
if (command_may_index == 0){
|
|
if (next_command.id >= 0x20 && next_command.id <= 0x2F ){
|
|
increment_WP_index();// this command is from the command list in EEPROM
|
|
command_may_index = wp_index;
|
|
//Serial.print("new command_may_index ");
|
|
//Serial.println(command_may_index,DEC);
|
|
if (log_bitmask & MASK_LOG_CMD)
|
|
Log_Write_Cmd(wp_index, &next_command);
|
|
process_may();
|
|
}
|
|
}
|
|
|
|
// these are do it now commands
|
|
// ---------------------------
|
|
if (next_command.id >= 0x30){
|
|
increment_WP_index();// this command is from the command list in EEPROM
|
|
if (log_bitmask & MASK_LOG_CMD)
|
|
Log_Write_Cmd(wp_index, &next_command);
|
|
process_now();
|
|
}
|
|
|
|
}
|
|
|
|
/*
|
|
These functions implement the waypoint commands.
|
|
*/
|
|
void process_must()
|
|
{
|
|
//Serial.print("process must index: ");
|
|
//Serial.println(command_must_index,DEC);
|
|
|
|
send_message(SEVERITY_LOW,"New cmd: ");
|
|
send_message(MSG_COMMAND, wp_index);
|
|
|
|
// clear May indexes
|
|
command_may_index = 0;
|
|
command_may_ID = 0;
|
|
|
|
command_must_ID = next_command.id;
|
|
|
|
// invalidate command so a new one is loaded
|
|
// -----------------------------------------
|
|
next_command.id = 0;
|
|
|
|
// reset navigation integrators
|
|
// -------------------------
|
|
reset_I();
|
|
|
|
// loads the waypoint into Next_WP struct
|
|
// --------------------------------------
|
|
set_next_WP(&next_command);
|
|
|
|
switch(command_must_ID){
|
|
|
|
case CMD_TAKEOFF: // TAKEOFF!
|
|
takeoff_altitude = (int)next_command.alt;
|
|
next_WP.lat = current_loc.lat + 10; // so we don't have bad calcs
|
|
next_WP.lng = current_loc.lng + 10; // so we don't have bad calcs
|
|
next_WP.alt = current_loc.alt + takeoff_altitude;
|
|
takeoff_complete = false; // set flag to use gps ground course during TO. IMU will be doing yaw drift correction
|
|
//set_next_WP(&next_WP);
|
|
break;
|
|
|
|
case CMD_WAYPOINT: // Navigate to Waypoint
|
|
break;
|
|
|
|
case CMD_R_WAYPOINT: // Navigate to Waypoint
|
|
next_command.lat += home.lat; // offset from home location
|
|
next_command.lng += home.lng; // offset from home location
|
|
|
|
// we've recalculated the WP so we need to set it again
|
|
set_next_WP(&next_command);
|
|
break;
|
|
|
|
case CMD_LAND: // LAND to Waypoint
|
|
velocity_land = 1000;
|
|
next_WP.lat = current_loc.lat;
|
|
next_WP.lng = current_loc.lng;
|
|
next_WP.alt = home.alt;
|
|
land_complete = false; // set flag to use gps ground course during TO. IMU will be doing yaw drift correction
|
|
break;
|
|
|
|
case CMD_ALTITUDE: // Loiter indefinitely
|
|
next_WP.lat = current_loc.lat + 10; // so we don't have bad calcs
|
|
next_WP.lng = current_loc.lng + 10; // so we don't have bad calcs
|
|
break;
|
|
|
|
case CMD_LOITER: // Loiter indefinitely
|
|
break;
|
|
|
|
case CMD_LOITER_N_TURNS: // Loiter N Times
|
|
break;
|
|
|
|
case CMD_LOITER_TIME:
|
|
break;
|
|
|
|
case CMD_RTL:
|
|
return_to_launch();
|
|
break;
|
|
|
|
}
|
|
}
|
|
|
|
void process_may()
|
|
{
|
|
//Serial.print("process_may cmd# ");
|
|
//Serial.println(wp_index,DEC);
|
|
command_may_ID = next_command.id;
|
|
|
|
// invalidate command so a new one is loaded
|
|
// -----------------------------------------
|
|
next_command.id = 0;
|
|
|
|
send_message(SEVERITY_LOW,"New cmd: ");
|
|
send_message(MSG_COMMAND, wp_index);
|
|
|
|
// do the command
|
|
// --------------
|
|
switch(command_may_ID){
|
|
|
|
case CMD_DELAY: // Navigate to Waypoint
|
|
delay_start = millis();
|
|
delay_timeout = next_command.lat;
|
|
break;
|
|
|
|
case CMD_LAND_OPTIONS: // Land this puppy
|
|
break;
|
|
|
|
case CMD_ANGLE:
|
|
// p1: bearing
|
|
// alt: speed
|
|
// lat: direction (-1,1),
|
|
// lng: rel (1) abs (0)
|
|
|
|
// target angle in degrees
|
|
command_yaw_start = nav_yaw; // current position
|
|
command_yaw_start_time = millis();
|
|
|
|
// which direction to turn
|
|
// 1 = clockwise, -1 = counterclockwise
|
|
command_yaw_dir = next_command.lat;
|
|
|
|
// 1 = Relative or 0 = Absolute
|
|
if (next_command.lng == 1) {
|
|
// relative
|
|
command_yaw_dir = (command_yaw_end > 0) ? 1 : -1;
|
|
command_yaw_end += nav_yaw;
|
|
command_yaw_end = wrap_360(command_yaw_end);
|
|
} else {
|
|
// absolute
|
|
command_yaw_end = next_command.p1 * 100;
|
|
}
|
|
|
|
|
|
// if unspecified go 10° a second
|
|
if(command_yaw_speed == 0)
|
|
command_yaw_speed = 10;
|
|
|
|
// if unspecified go clockwise
|
|
if(command_yaw_dir == 0)
|
|
command_yaw_dir = 1;
|
|
|
|
// calculate the delta travel
|
|
if(command_yaw_dir == 1){
|
|
if(command_yaw_start > command_yaw_end){
|
|
command_yaw_delta = 36000 - (command_yaw_start - command_yaw_end);
|
|
}else{
|
|
command_yaw_delta = command_yaw_end - command_yaw_start;
|
|
}
|
|
}else{
|
|
if(command_yaw_start > command_yaw_end){
|
|
command_yaw_delta = command_yaw_start - command_yaw_end;
|
|
}else{
|
|
command_yaw_delta = 36000 + (command_yaw_start - command_yaw_end);
|
|
}
|
|
}
|
|
command_yaw_delta = wrap_360(command_yaw_delta);
|
|
|
|
// rate to turn deg per second - default is ten
|
|
command_yaw_speed = next_command.alt;
|
|
command_yaw_time = command_yaw_delta / command_yaw_speed;
|
|
//9000 turn in 10 seconds
|
|
//command_yaw_time = 9000/ 10 = 900° per second
|
|
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
void process_now()
|
|
{
|
|
const float t5 = 100000.0;
|
|
//Serial.print("process_now cmd# ");
|
|
//Serial.println(wp_index,DEC);
|
|
|
|
byte id = next_command.id;
|
|
|
|
// invalidate command so a new one is loaded
|
|
// -----------------------------------------
|
|
next_command.id = 0;
|
|
|
|
send_message(SEVERITY_LOW, "New cmd: ");
|
|
send_message(MSG_COMMAND, wp_index);
|
|
|
|
// do the command
|
|
// --------------
|
|
switch(id){
|
|
|
|
case CMD_RESET_INDEX:
|
|
init_commands();
|
|
break;
|
|
|
|
case CMD_GETVAR_INDEX:
|
|
//
|
|
break;
|
|
|
|
case CMD_SENDVAR_INDEX:
|
|
//
|
|
break;
|
|
|
|
case CMD_TELEMETRY:
|
|
//
|
|
break;
|
|
|
|
//case CMD_AIRSPEED_CRUISE:
|
|
//airspeed_cruise = next_command.p1 * 100;
|
|
// todo save to EEPROM
|
|
//break;
|
|
|
|
case CMD_THROTTLE_CRUISE:
|
|
throttle_cruise = next_command.p1;
|
|
// todo save to EEPROM
|
|
break;
|
|
|
|
case CMD_RESET_HOME:
|
|
init_home();
|
|
break;
|
|
|
|
case CMD_KP_GAIN:
|
|
//kp[next_command.p1] = next_command.alt/t5;
|
|
// todo save to EEPROM
|
|
break;
|
|
case CMD_KI_GAIN:
|
|
//ki[next_command.p1] = next_command.alt/t5;
|
|
// todo save to EEPROM
|
|
break;
|
|
case CMD_KD_GAIN:
|
|
//kd[next_command.p1] = next_command.alt/t5;
|
|
// todo save to EEPROM
|
|
break;
|
|
|
|
case CMD_KI_MAX:
|
|
//integrator_max[next_command.p1] = next_command.alt/t5;
|
|
// todo save to EEPROM
|
|
break;
|
|
|
|
//case CMD_KFF_GAIN:
|
|
// kff[next_command.p1] = next_command.alt/t5;
|
|
// todo save to EEPROM
|
|
// break;
|
|
|
|
//case CMD_RADIO_TRIM:
|
|
//radio_trim[next_command.p1] = next_command.alt;
|
|
//save_EEPROM_trims();
|
|
//break;
|
|
|
|
//case CMD_RADIO_MAX:
|
|
// radio_max[next_command.p1] = next_command.alt;
|
|
// save_EEPROM_radio_minmax();
|
|
// break;
|
|
|
|
//case CMD_RADIO_MIN:
|
|
// radio_min[next_command.p1] = next_command.alt;
|
|
// save_EEPROM_radio_minmax();
|
|
// break;
|
|
|
|
case CMD_REPEAT:
|
|
new_event(&next_command);
|
|
break;
|
|
|
|
case CMD_SERVO:
|
|
APM_RC.OutputCh(next_command.p1, next_command.alt);
|
|
break;
|
|
|
|
case CMD_INDEX:
|
|
command_must_index = 0;
|
|
command_may_index = 0;
|
|
wp_index = next_command.p1 - 1;
|
|
break;
|
|
|
|
case CMD_RELAY:
|
|
if(next_command.p1 = 0){
|
|
relay_A();
|
|
}else{
|
|
relay_B();
|
|
}
|
|
break;
|
|
|
|
}
|
|
}
|
|
|
|
// Verify commands
|
|
// ---------------
|
|
void verify_must()
|
|
{
|
|
float power;
|
|
|
|
switch(command_must_ID) {
|
|
|
|
case CMD_ALTITUDE:
|
|
if (abs(next_WP.alt - current_loc.alt) < 100){
|
|
command_must_index = 0;
|
|
}
|
|
break;
|
|
|
|
case CMD_TAKEOFF: // Takeoff!
|
|
if (current_loc.alt > (next_WP.alt -100)){
|
|
command_must_index = 0;
|
|
takeoff_complete = true;
|
|
}
|
|
break;
|
|
|
|
case CMD_LAND:
|
|
// 10 - 9 = 1
|
|
velocity_land = ((old_alt - current_loc.alt) *.05) + (velocity_land * .95);
|
|
old_alt = current_loc.alt;
|
|
if(velocity_land == 0){
|
|
land_complete = true;
|
|
command_must_index = 0;
|
|
}
|
|
break;
|
|
|
|
case CMD_WAYPOINT: // reach a waypoint
|
|
if ((wp_distance > 0) && (wp_distance <= wp_radius)) {
|
|
Serial.print("MSG REACHED_WAYPOINT #");
|
|
Serial.println(command_must_index,DEC);
|
|
// clear the command queue;
|
|
command_must_index = 0;
|
|
}
|
|
// add in a more complex case
|
|
// Doug to do
|
|
if(loiter_sum > 300){
|
|
send_message(SEVERITY_MEDIUM,"Missed WP");
|
|
command_must_index = 0;
|
|
}
|
|
break;
|
|
|
|
case CMD_LOITER_N_TURNS: // LOITER N times
|
|
break;
|
|
|
|
case CMD_LOITER_TIME: // loiter N milliseconds
|
|
break;
|
|
|
|
case CMD_RTL:
|
|
if (wp_distance <= wp_radius) {
|
|
//Serial.println("REACHED_HOME");
|
|
command_must_index = 0;
|
|
}
|
|
break;
|
|
|
|
case CMD_LOITER: // Just plain LOITER
|
|
break;
|
|
|
|
case CMD_ANGLE:
|
|
if((millis() - command_yaw_start_time) > command_yaw_time){
|
|
command_must_index = 0;
|
|
nav_yaw = command_yaw_end;
|
|
}else{
|
|
// else we need to be at a certain place
|
|
// power is a ratio of the time : .5 = half done
|
|
power = (float)(millis() - command_yaw_start_time) / (float)command_yaw_time;
|
|
nav_yaw = command_yaw_start + ((float)command_yaw_delta * power * command_yaw_dir);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
send_message(SEVERITY_HIGH,"No current Must commands");
|
|
break;
|
|
}
|
|
}
|
|
|
|
void verify_may()
|
|
{
|
|
switch(command_may_ID) {
|
|
case CMD_DELAY:
|
|
if ((millis() - delay_start) > delay_timeout){
|
|
command_may_index = 0;
|
|
delay_timeout = 0;
|
|
}
|
|
|
|
case CMD_LAND_OPTIONS:
|
|
break;
|
|
}
|
|
}
|
|
|