.. |
AC_AttitudeControl
|
AC_AttitudeControl: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AC_AutoTune
|
AC_AutoTune: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AC_Autorotation
|
AC_Autorotation: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AC_Avoidance
|
AC_Avoidance: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AC_Fence
|
AC_Fence: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AC_InputManager
|
AC_InputManager: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AC_PID
|
AC_PID: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AC_PrecLand
|
AC_PrecLand: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AC_Sprayer
|
…
|
|
AC_WPNav
|
AC_WPNav: params always use set method
|
2022-08-03 13:43:48 +01:00 |
APM_Control
|
APM_Control: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_ADC
|
AP_ADC: Console output can be disabled
|
2022-05-17 09:53:06 +10:00 |
AP_ADSB
|
AP_ADSB: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_AHRS
|
AP_AHRS: modify AHRS type check for compass-less setups
|
2022-08-09 11:02:24 +10:00 |
AP_AIS
|
AP_AIS: include GCS_MAVLink.h
|
2022-07-13 18:32:35 +10:00 |
AP_AccelCal
|
AP_AccelCal: limit COMMAND_ACKs accepted for vehicle pose confirmation
|
2022-05-25 17:55:55 +10:00 |
AP_AdvancedFailsafe
|
AP_AdvancedFailsafe: add note to desc's on how to determine GPIO pin numbers
|
2022-04-24 08:21:01 +09:00 |
AP_Airspeed
|
AP_Airspeed: fix clang++ warnings on static inits
|
2022-06-28 10:20:30 +10:00 |
AP_Arming
|
AP_Arming: rename contains_terrain_relative->contains_terrain_alt_items
|
2022-08-10 18:04:22 +10:00 |
AP_Avoidance
|
AP_Avoidance: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_BLHeli
|
AP_BLHeli: make ESC debug easier to see
|
2022-08-03 17:06:38 +10:00 |
AP_Baro
|
AP_Baro: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_BattMonitor
|
AP_BattMonitor: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_Beacon
|
AP_Beacon: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_BoardConfig
|
AP_BoardConfig: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_Button
|
AP_Button: pre-arm displays gpio vs servo_ch conflict
|
2022-04-26 15:19:28 +09:00 |
AP_CANManager
|
AP_CANManager: added scripting2 protocol
|
2022-07-03 08:21:55 +10:00 |
AP_Camera
|
AP_Camera: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_CheckFirmware
|
AP_CheckFirmware: added library for checking firmware ID and CRC
|
2022-08-15 09:18:34 +10:00 |
AP_Common
|
AP_Common: correct gtests
|
2022-08-15 07:39:39 +10:00 |
AP_Compass
|
AP_Compass: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_CustomRotations
|
AP_CustomRotations: fix param refrencing
|
2022-04-20 18:25:57 +10:00 |
AP_DAL
|
AP_DAL: added set source events for EKF3
|
2022-05-31 09:17:37 +10:00 |
AP_Declination
|
AP_Declination: ensure indexing into declination tables is always correct
|
2022-03-15 10:15:22 +11:00 |
AP_Devo_Telem
|
AP_Devo_Telem: rename AP_AHRS::get_position to get_location
|
2022-01-25 10:47:22 +11:00 |
AP_EFI
|
AP_EFI: prevent flood of Lutan serial port
|
2022-08-03 08:27:12 +10:00 |
AP_ESC_Telem
|
AP_ESC_Telem: keep RPM updates in the correct order
|
2022-08-09 11:13:11 +10:00 |
AP_ExternalAHRS
|
AP_ExternalAHRS: correct compilation if AP_Baro_ExternalAHRS isn't available
|
2022-05-25 18:19:00 +10:00 |
AP_FETtecOneWire
|
AP_FETTecOneWire: Fix the recent change of NUM_SERVO_CHANNELS > 24
|
2022-06-22 11:51:23 +10:00 |
AP_Filesystem
|
AP_Filesystem: change AC_FENCE to AP_FENCE_ENABLED
|
2022-07-27 19:04:56 +10:00 |
AP_FlashIface
|
AP_FlashIface: make sure XIP flash is ready before returning
|
2022-04-12 09:19:45 +10:00 |
AP_FlashStorage
|
AP_FlashStorage: support L496 MCUs
|
2021-09-24 18:08:00 +10:00 |
AP_Follow
|
AP_Follow: vector params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_Frsky_Telem
|
AP_Frsky_Telem: change AC_FENCE to AP_FENCE_ENABLED
|
2022-07-27 19:04:56 +10:00 |
AP_GPS
|
AP_GPS: fixed undulation for DroneCAN GPS
|
2022-08-10 05:04:18 +10:00 |
AP_Generator
|
AP_Generator: add AP_GENERATOR_RICHENPOWER_ENABLED
|
2022-07-19 09:09:05 +10:00 |
AP_Gripper
|
AP_Gripper: apply auto close to all backends.
|
2022-08-09 13:23:35 +10:00 |
AP_GyroFFT
|
AP_GyroFFT: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_HAL
|
AP_HAL: add TeraRange Neo Rangefinder
|
2022-08-09 09:01:34 +10:00 |
AP_HAL_ChibiOS
|
AP_HAL_ChibiOS: correct HAL_SPI_CHECK_CLOCK_FREQ build error
|
2022-08-12 20:53:36 +10:00 |
AP_HAL_ESP32
|
AP_HAL_ESP32: more changes for 32 bit servo mask
|
2022-05-22 12:07:37 +10:00 |
AP_HAL_Empty
|
AP_HAL_Empty: move implementations of functions to header
|
2022-06-23 12:38:41 +10:00 |
AP_HAL_Linux
|
AP_HAL_Linux: more changes for 32 bit servo mask
|
2022-05-22 12:07:37 +10:00 |
AP_HAL_SITL
|
AP_HAL_SITL: correct bind-value SIM_RC_FAIL handling
|
2022-08-10 17:14:21 +10:00 |
AP_Hott_Telem
|
AP_Hott_Telem: Console output can be disabled
|
2022-05-17 09:53:06 +10:00 |
AP_ICEngine
|
AP_ICEngine: add and use AP_ICENGINE_ENABLE
|
2022-07-22 08:48:16 +10:00 |
AP_IOMCU
|
AP_IOMCU: Console output can be disabled
|
2022-05-17 09:53:06 +10:00 |
AP_IRLock
|
AP_IRLock: correct spelling mili -> milli
|
2022-01-31 08:55:29 +09:00 |
AP_InertialNav
|
AP_InertialNav: nfc, fix to say relative to EKF origin
|
2022-02-03 12:05:12 +09:00 |
AP_InertialSensor
|
AP_InertialSensor: correct INS_generic example
|
2022-08-13 20:53:29 +10:00 |
AP_InternalError
|
AP_InternalError: change panic to return error code as string in SITL
|
2021-09-28 09:11:48 +10:00 |
AP_JSButton
|
…
|
|
AP_KDECAN
|
AP_KDECAN: more changes for 32 bit servo mask
|
2022-05-22 12:07:37 +10:00 |
AP_L1_Control
|
AP_L1_Control: use AP_GROUPINFO instead of AP_GROUPINFO_FRAME
|
2022-05-10 09:35:11 +10:00 |
AP_LTM_Telem
|
AP_LTM_Telem: add AP_LTM_TELEM_ENABLED
|
2022-06-28 20:19:41 +10:00 |
AP_Landing
|
AP_Landing: change logging to be designated as streaming
|
2022-08-05 10:16:18 +10:00 |
AP_LandingGear
|
AP_LandingGear: SITL: only set defualts is SITL pin is set avoiding enable via param conversion
|
2022-08-02 10:48:19 +10:00 |
AP_LeakDetector
|
AP_LeakDetector: check for valid analog pin
|
2021-10-06 18:42:51 +11:00 |
AP_Logger
|
AP_Logger: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_MSP
|
AP_MSP: fix line ending
|
2022-06-08 08:16:42 +09:00 |
AP_Math
|
AP_Math: add dignostic message for SCurve internal error
|
2022-08-10 22:18:42 +10:00 |
AP_Menu
|
…
|
|
AP_Mission
|
AP_Mission: rename contains_terrain_relative->contains_terrain_alt_items
|
2022-08-10 18:04:22 +10:00 |
AP_Module
|
AP_Module: tidy includes
|
2022-05-03 09:14:58 +10:00 |
AP_Motors
|
AP_Motors: refactor to allow frame type symbols to be created for ELF
|
2022-08-09 10:06:18 +10:00 |
AP_Mount
|
AP_Mount: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_NMEA_Output
|
AP_NMEA_Output: use a fixed maximum number of NMEA outputs
|
2022-02-23 12:36:59 +11:00 |
AP_NavEKF
|
AP_NavEKF: re-implemented EKF ring buffer
|
2022-06-24 20:25:39 +10:00 |
AP_NavEKF2
|
AP_NavEKF2: fixed undefined behaviour in logging
|
2022-07-12 11:00:08 +10:00 |
AP_NavEKF3
|
AP_NavEKF3: add EK3_GPS_VACC_MAX as a threshold that decides whether to use GPS as altitude source depending on vAcc
|
2022-08-03 17:57:05 +10:00 |
AP_Navigation
|
…
|
|
AP_Notify
|
AP_Notify: tidy includes
|
2022-05-03 09:14:58 +10:00 |
AP_OLC
|
AP_OLC: tidy includes
|
2022-05-03 09:14:58 +10:00 |
AP_ONVIF
|
AP_ONVIF: fix executable permission and trailing whitespace
|
2022-06-08 08:16:42 +09:00 |
AP_OSD
|
AP_OSD: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_OpenDroneID
|
AP_OpenDroneID: added AP_OpenDroneID_config.h
|
2022-08-15 09:18:34 +10:00 |
AP_OpticalFlow
|
AP_OpticalFlow: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_Parachute
|
AP_Parachute: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_Param
|
AP_Param: remove AP_ParamV `=` operator
|
2022-08-03 13:43:48 +01:00 |
AP_PiccoloCAN
|
AP_PiccoloCAN: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_Proximity
|
AP_Proximity: change AC_FENCE to AP_FENCE_ENABLED
|
2022-07-27 19:04:56 +10:00 |
AP_RAMTRON
|
AP_RAMTRON: reduce scope for WITH_SEMAPHORE
|
2022-07-17 21:42:33 +10:00 |
AP_RCMapper
|
AP_RCMapper: Increase parameter metadata range to match NUM_RC_CHANNELS
|
2022-06-21 09:57:44 +10:00 |
AP_RCProtocol
|
AP_RCProtocol: reset UART on RX failure for CRSF
|
2022-06-15 17:20:36 +10:00 |
AP_RCTelemetry
|
AP_RCTelemetry: don't spam mode changes on CRSF startup
|
2022-06-15 17:20:36 +10:00 |
AP_ROMFS
|
AP_ROMFS: tidy includes
|
2022-05-03 09:14:58 +10:00 |
AP_RPM
|
AP_RPM: fixed use of configured() vs configured_in_storage()
|
2022-06-06 13:11:50 +10:00 |
AP_RSSI
|
AP_RSSI: convert floating point divides into multiplys
|
2022-03-18 15:26:44 +11:00 |
AP_RTC
|
AP_RTC: fix oldest_acceptable_date to be in micros
|
2022-02-10 09:22:30 +11:00 |
AP_Radio
|
AP_Radio: Console output can be disabled
|
2022-05-17 09:53:06 +10:00 |
AP_Rally
|
AP_Rally: tidy creation of Location from RallyLocation
|
2022-07-14 11:49:53 +10:00 |
AP_RangeFinder
|
AP_RangeFinder: add TeraRange Neo Rangefinder
|
2022-08-09 09:01:34 +10:00 |
AP_Relay
|
AP_Relay:Prevent operation for sim-on-hardware,add logs
|
2022-05-02 10:54:02 +10:00 |
AP_RobotisServo
|
AP_RobotisServo: disable with minmimize features and 1mb flash
|
2022-06-15 18:05:44 +10:00 |
AP_SBusOut
|
…
|
|
AP_Scheduler
|
AP_Scheduler: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_Scripting
|
AP_Scripting: examples: Aerobatics: Corrects arg1/arg2
|
2022-07-20 13:18:10 +01:00 |
AP_SerialLED
|
AP_SerialLED: enable 32 servo outs
|
2022-05-22 12:07:37 +10:00 |
AP_SerialManager
|
AP_SerialManager:correct find_baudrate() function
|
2022-07-25 16:03:27 +10:00 |
AP_ServoRelayEvents
|
…
|
|
AP_SmartRTL
|
AP_SmartRTL: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_Soaring
|
AP_Soaring: make function const
|
2022-07-20 17:28:39 +10:00 |
AP_Stats
|
…
|
|
AP_TECS
|
AP_TECS: use TECS log bitmask in constructor
|
2022-08-09 09:44:50 +10:00 |
AP_TempCalibration
|
…
|
|
AP_TemperatureSensor
|
…
|
|
AP_Terrain
|
AP_Terrain: fix bad prearms-pass-when-they-shouldn't issue
|
2022-08-09 14:31:14 +10:00 |
AP_Torqeedo
|
AP_Torqeedo : correct comment spelling
|
2022-05-24 20:27:45 +09:00 |
AP_Tuning
|
AP_Tuning: tidy includes
|
2022-05-03 09:14:58 +10:00 |
AP_UAVCAN
|
AP_UAVCAN: support OpenDroneID
|
2022-08-09 14:37:08 +10:00 |
AP_Vehicle
|
AP_Vehicle: use AP_CheckFirmware
|
2022-08-15 09:18:34 +10:00 |
AP_VideoTX
|
AP_VideoTX: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AP_VisualOdom
|
AP_VisualOdom: only include log structure if enabled
|
2022-07-13 18:14:12 +10:00 |
AP_Volz_Protocol
|
AP_Volz: disable with minmimize features
|
2022-06-15 18:05:44 +10:00 |
AP_WheelEncoder
|
AP_WheelEncoder: fix WheelEncoder_Quadrature timestamp.
|
2022-06-07 09:59:27 +10:00 |
AP_Winch
|
AP_Winch: stop libraries including AP_Logger.h in .h files
|
2022-04-08 19:18:38 +10:00 |
AP_WindVane
|
AP_WindVane: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AR_Motors
|
AR_Motors: params always use set method
|
2022-08-03 13:43:48 +01:00 |
AR_WPNav
|
AR_WPNav: stop libraries including AP_Logger.h in .h files
|
2022-04-08 19:18:38 +10:00 |
Filter
|
Filter: params always use set method
|
2022-08-03 13:43:48 +01:00 |
GCS_MAVLink
|
GCS_MAVLINK: pass OPEN_DRONE_ID_SYSTEM_UPDATE to library
|
2022-08-14 22:02:43 +10:00 |
PID
|
PID: params always use set method
|
2022-08-03 13:43:48 +01:00 |
RC_Channel
|
RC_Channel: reserve RX aux functions 248-249 for Skybrush
|
2022-08-09 13:22:07 +10:00 |
SITL
|
SITL: fix var naming for precland device center
|
2022-08-09 18:00:11 +10:00 |
SRV_Channel
|
SRV_Channel: use set_and_default method
|
2022-07-20 17:59:59 +10:00 |
StorageManager
|
StorageManager: fix write_block() comment
|
2021-12-17 09:53:47 +09:00 |
doc
|
…
|
|