| .. |
|
AC_AttitudeControl
|
AC_PosControl: protect against POS_Z_P, ACCEL_Z_P divide-by-zero
|
2017-03-15 09:22:23 +09:00 |
|
AC_Avoidance
|
AC_Avoidance: only stop below alt-fence if fence is enabled
|
2017-03-06 18:02:03 +09:00 |
|
AC_Fence
|
AC_Fence: return failure message
|
2017-03-25 10:50:58 +09:00 |
|
AC_InputManager
|
Global: remove mode line from headers
|
2016-10-24 09:42:01 -02:00 |
|
AC_PID
|
AC_PID: added feed-forward to AC_PID
|
2017-02-18 17:26:43 +11:00 |
|
AC_PrecLand
|
AC_PrecLand: fix usage of distance_to_target
|
2017-03-29 14:45:56 +09:00 |
|
AC_Sprayer
|
AC_Sprayer: use new SRV_Channels API
|
2017-01-12 17:39:37 +11:00 |
|
AC_WPNav
|
AC_WPNav: speed-up and down parameter min to 10cm/s
|
2017-03-15 09:22:23 +09:00 |
|
APM_Control
|
APM_Control: Added derating of steering wheel
|
2016-12-27 13:33:52 +11:00 |
|
AP_ADC
|
Global: change Device::PeriodicCb signature
|
2017-01-14 10:03:54 +11:00 |
|
AP_ADSB
|
AP_ADSB: cleanup
|
2017-02-22 11:55:47 -08:00 |
|
AP_AHRS
|
AP_AHRS: added optional skip_ins_update to AHRS::update()
|
2017-04-03 13:04:11 +09:00 |
|
AP_AccelCal
|
AP_AccelCal: fix bug preventing accel cal fit to run more than one iteration
|
2016-11-18 20:03:30 -02:00 |
|
AP_AdvancedFailsafe
|
AP_AdvancedFailsafe: adapt to new RC_Channel API
|
2017-01-12 17:39:37 +11:00 |
|
AP_Airspeed
|
AP_Airspeed: average two readings for airspeed
|
2017-04-04 08:40:31 +10:00 |
|
AP_Arming
|
AP_Arming: use compass get_offsets_max()
|
2017-04-04 00:49:34 +01:00 |
|
AP_Avoidance
|
AP_Avoidance: Remove unutilized get_destination_perpendicular
|
2017-02-13 09:23:14 +11:00 |
|
AP_Baro
|
AP_Baro: Limit ground temperature used for the altitude
|
2017-03-28 11:25:46 +11:00 |
|
AP_BattMonitor
|
AP_BattMonitor: confirm pec support before attempting to read voltage
|
2017-03-30 10:34:45 +09:00 |
|
AP_Beacon
|
AP_Beacon: Apply correct conversion from Pozyx beacon earth frame
|
2017-01-27 16:57:42 +09:00 |
|
AP_BoardConfig
|
AP_BoardConfig: added BRD_IO_ENABLE parameter
|
2017-04-05 20:14:53 +10:00 |
|
AP_Buffer
|
Global: remove mode line from headers
|
2016-10-24 09:42:01 -02:00 |
|
AP_Button
|
Global: remove mode line from headers
|
2016-10-24 09:42:01 -02:00 |
|
AP_Camera
|
Camera: Fix an incorrect label on CAM_DURATION
|
2017-02-13 19:20:49 +00:00 |
|
AP_Common
|
AP_Common: Unify from print or println to printf.
|
2017-01-27 18:20:22 +11:00 |
|
AP_Compass
|
AP_Compass: added COMPASS_OFFS_MAX
|
2017-04-04 00:49:34 +01:00 |
|
AP_Declination
|
AP_Declination: Unify from print or println to printf.
|
2017-01-27 18:20:22 +11:00 |
|
AP_FlashStorage
|
AP_FlashStorage: added erase_ok callback
|
2016-12-02 09:49:40 +11:00 |
|
AP_Frsky_Telem
|
AP_FrSky_Telem: fix sending messages 3 times
|
2017-03-22 01:23:26 +00:00 |
|
AP_GPS
|
AP_GPS: Fix parameter metadata
|
2017-03-22 16:16:26 -07:00 |
|
AP_Gripper
|
AP_Gripper: Add missing parameter units
|
2017-01-16 19:07:26 +00:00 |
|
AP_HAL
|
AP_HAL: add HAL_PX4_HAVE_PWM_INPUT
|
2017-03-24 12:06:19 +11:00 |
|
AP_HAL_AVR
|
AP_HAL_AVR: remove examples
|
2016-05-23 21:49:45 -03:00 |
|
AP_HAL_Empty
|
AP_HAL_Empty: adapt to new api
|
2017-01-23 21:23:16 +11:00 |
|
AP_HAL_FLYMAPLE
|
AP_HAL_FLYMAPLE: remove hal
|
2016-05-23 21:49:45 -03:00 |
|
AP_HAL_Linux
|
AP_HAL_Linux: BBBmini remove onboard OpticalFlow
|
2017-03-07 22:48:48 -08:00 |
|
AP_HAL_PX4
|
AP_HAL_PX4: correct output of system-id on px4-v3
|
2017-04-03 14:14:59 +10:00 |
|
AP_HAL_QURT
|
HAL_QURT: fixed a bug in new_input()
|
2017-01-12 17:39:37 +11:00 |
|
AP_HAL_SITL
|
Add and update missing SITL command line usage information
|
2017-04-05 20:17:40 +10:00 |
|
AP_HAL_VRBRAIN
|
AP_HAL_VRBRAIN: Unify from print or println to printf.
|
2017-01-27 18:20:22 +11:00 |
|
AP_ICEngine
|
AP_ICEngine: Update for AHRS NED changes
|
2017-02-13 09:23:14 +11:00 |
|
AP_IRLock
|
AP_IRLock_SITL: make port variable
|
2017-03-18 19:58:11 +11:00 |
|
AP_InertialNav
|
AP_InertialNav: Update for AHRS NED changes
|
2017-02-13 09:23:14 +11:00 |
|
AP_InertialSensor
|
AP_InertialSensor: fixed invensense driver temp reading
|
2017-04-03 10:06:27 +10:00 |
|
AP_JSButton
|
AP_JSButton: Change mode button function implementation
|
2017-04-05 13:29:06 -04:00 |
|
AP_L1_Control
|
AP_L1_Control: add missing parameter metadata
|
2016-10-27 09:15:03 -07:00 |
|
AP_Landing
|
AP_Landing: fix to remove reorder warning
|
2017-03-20 07:32:36 +11:00 |
|
AP_LandingGear
|
AP_LandingGear: use new SRV_Channels API
|
2017-01-12 17:39:37 +11:00 |
|
AP_LeakDetector
|
AP_LeakDetector: New library and analog/digital sensor drivers
|
2017-02-21 11:26:14 +11:00 |
|
AP_Math
|
AP_Math: added matrixN for soaring controller
|
2017-03-14 08:35:44 +11:00 |
|
AP_Menu
|
AP_Menu: Unify from print or println to printf.
|
2017-01-27 18:20:22 +11:00 |
|
AP_Mission
|
AP_Mission: Unify from print or println to printf.
|
2017-01-27 18:20:22 +11:00 |
|
AP_Module
|
AP_Module: Update for AHRS NED changes
|
2017-02-13 09:23:14 +11:00 |
|
AP_Motors
|
AP_Motors: update descriptions for new parameters
|
2017-04-01 05:25:59 +11:00 |
|
AP_Mount
|
AP_Mount: Remove solo gimbal from the minimal build support
|
2017-03-06 11:53:08 +11:00 |
|
AP_NavEKF
|
NavEKF: Add GPS vertical accuracy to nav_gps_flags
|
2017-02-22 11:53:42 -08:00 |
|
AP_NavEKF2
|
AP_NavEKF2: apply height innovation floor only when barometer is in use
|
2017-03-24 14:42:36 -07:00 |
|
AP_NavEKF3
|
AP_NavEKF3: Update tilt alignment check
|
2017-04-05 20:16:16 +10:00 |
|
AP_Navigation
|
Global: remove mode line from headers
|
2016-10-24 09:42:01 -02:00 |
|
AP_Notify
|
AP_Notify: Correct the display area clear of the text message.
|
2017-03-22 01:24:21 +00:00 |
|
AP_OpticalFlow
|
AP_OpticalFlow: Fix parameter metadata
|
2017-03-22 16:16:26 -07:00 |
|
AP_Parachute
|
AP_Parachute: Unify from print or println to printf.
|
2017-01-27 18:20:22 +11:00 |
|
AP_Param
|
AP_Param: allow for dynamic var_info tables
|
2017-03-25 16:22:10 +11:00 |
|
AP_Proximity
|
AP_Proximity: minor fix to param description
|
2017-03-01 14:59:44 +09:00 |
|
AP_RCMapper
|
AP_RCMapper: Add forward and strafe channel mappings for Sub
|
2017-02-21 11:26:14 +11:00 |
|
AP_RPM
|
AP_RPM: support RPM input on any AUX pin
|
2017-04-04 16:33:45 +10:00 |
|
AP_RSSI
|
Global: remove mode line from headers
|
2016-10-24 09:42:01 -02:00 |
|
AP_Rally
|
Global: remove mode line from headers
|
2016-10-24 09:42:01 -02:00 |
|
AP_RangeFinder
|
Add aerofc support
|
2017-03-24 12:06:19 +11:00 |
|
AP_Relay
|
Global: remove mode line from headers
|
2016-10-24 09:42:01 -02:00 |
|
AP_Scheduler
|
AP_Scheduler: Set main loop rate to 400hz for Sub
|
2017-02-21 11:26:14 +11:00 |
|
AP_SerialManager
|
AP_SerialManager: uartA with 460800 baud for aerofc
|
2017-03-24 12:06:19 +11:00 |
|
AP_ServoRelayEvents
|
AP_ServoRelayEvents: Remove constraint on 'channel' value
|
2017-04-04 09:14:07 +10:00 |
|
AP_Soaring
|
AP_Soaring: adding const qualifiers to some of soaring controller's methods
|
2017-03-14 08:53:11 +11:00 |
|
AP_SpdHgtControl
|
AP_SpdHgtControl: added function to reset integrator
|
2017-03-14 08:20:48 +11:00 |
|
AP_Stats
|
AP_Stats: Add missing parameter units
|
2017-01-16 19:07:27 +00:00 |
|
AP_TECS
|
AP_TECS: disable bad descent for soaring
|
2017-03-14 08:53:11 +11:00 |
|
AP_TemperatureSensor
|
AP_TemperatureSensor: Use powf instead of pow
|
2017-02-22 11:25:18 -08:00 |
|
AP_Terrain
|
AP_Terrain: prevent use of invalid Location
|
2016-12-22 15:50:30 +11:00 |
|
AP_Tuning
|
AP_Tuning: adapt to new RC_Channel API
|
2017-01-12 17:39:37 +11:00 |
|
AP_Vehicle
|
AP_Vehicle: Add the ArduSub vehicle type.
|
2017-02-21 11:26:14 +11:00 |
|
DataFlash
|
DataFlash: extract common labels and formats into defines
|
2017-04-05 19:16:21 +10:00 |
|
Filter
|
Filter: added new constructor for 1p filter
|
2016-11-25 17:49:57 +11:00 |
|
GCS_Console
|
GCS_Console: Unify from print or println to printf.
|
2017-01-27 18:20:22 +11:00 |
|
GCS_MAVLink
|
GCS_MAVLink: always allow HOME to be read by MISSION_REQUEST
|
2017-04-04 15:00:07 +10:00 |
|
PID
|
PID: Unify from print or println to printf.
|
2017-01-27 18:20:22 +11:00 |
|
RC_Channel
|
RC_Channel: improved doc string
|
2017-02-07 16:32:57 +11:00 |
|
SITL
|
SITL: Added SIM_ENGINE_FAIL to define failed motor
|
2017-03-29 22:39:51 +11:00 |
|
SRV_Channel
|
SRV_Channel: fixed reversing on servo gimbals
|
2017-03-23 11:02:07 +09:00 |
|
StorageManager
|
StorageManager: Unify from print or println to printf.
|
2017-01-27 18:20:22 +11:00 |
|
doc
|
doc: Fix typos
|
2016-05-13 19:20:06 -03:00 |
4e700ea4df