Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-22 00:28:30 -04:00
Code Issues Packages Projects Releases Wiki Activity
f23bd7e09d
ardupilot/ArduPlane
History
Leandro Pereira f23bd7e09d GCS_MAVLink: Use a single stream_trigger() implementation 
This has no side effects, but since all implementations were basically
the same, move the implementation to GCS_Common and the only part that
adjusts the rate based on which which stream to each individual
GCS_MAVLINK implementation.
2016-05-07 23:49:35 -03:00
..
adsb.cpp Plane: refactored interface 2015-12-31 15:36:49 +11:00
altitude.cpp Plane: Added a method that returns current altitude relative to terrain, if available, or home otherwise. 2016-05-05 09:02:20 -07:00
APM_Config.h Plane: added HIL_MODE parameter 2015-03-13 22:52:56 +11:00
APM_Config.h.reference Plane: cleanup HIL defines 2014-02-15 05:29:46 +11:00
ArduPlane.cpp Plane: removed Log_Write_IMUDT 2016-05-07 18:27:20 +10:00
arming_checks.cpp Plane: add missionLoaded arming check fail for mis.len <= 1 2016-02-22 16:19:40 +11:00
Attitude.cpp Plane: initial implementation of QRTL for quadplane RTL 2016-04-30 14:34:47 +10:00
capabilities.cpp ArduPlane: support MAVLINK_MSG_ID_MISSION_ITEM_INT 2016-05-01 07:13:46 +10:00
commands_logic.cpp Plane: initial implementation of QRTL for quadplane RTL 2016-04-30 14:34:47 +10:00
commands.cpp Plane: Add support for DO_REPOSITION via COMMAND_INT 2016-04-17 19:00:03 -07:00
config.h ArduPlane: use separate header for version macro 2016-05-06 13:11:28 -03:00
control_modes.cpp Plane: added OVERRIDE_SAFETY parameter 2016-01-29 12:20:14 +11:00
createTags ArduPlane: remove mention to .pde files 2016-05-07 22:55:48 -03:00
defines.h Plane: initial implementation of QRTL for quadplane RTL 2016-04-30 14:34:47 +10:00
events.cpp Plane: initial implementation of QRTL for quadplane RTL 2016-04-30 14:34:47 +10:00
failsafe.cpp Plane: refactor perf variables into a structure 2016-04-21 16:45:02 +10:00
GCS_Mavlink.cpp GCS_MAVLink: Use a single stream_trigger() implementation 2016-05-07 23:49:35 -03:00
geofence.cpp ArduPlane: avoid comparison between signed and unsigned 2015-12-01 16:28:18 -02:00
is_flying.cpp Plane: fixed is_flying() for VTOL flight 2016-04-23 21:03:46 +10:00
landing.cpp Plane: update flight stage on successful restart_landing_sequence() 2016-04-21 22:54:23 -07:00
Log.cpp Plane: convert tuning to use AP_Tuning library 2016-05-07 18:34:15 +10:00
make.inc Plane: convert tuning to use AP_Tuning library 2016-05-07 18:34:15 +10:00
Makefile Plane: cleanup cruft in Makefile 2013-10-13 21:41:01 +11:00
Makefile.waf waf: use single entry point for make wrappers 2015-12-10 10:40:34 +09:00
motor_test.cpp Plane: allow testing of all motors in sequence 2016-04-01 11:09:51 +11:00
navigation.cpp Plane: move target land_airspeed logic to top layer 2016-04-21 21:30:50 -07:00
parachute.cpp Plane: Parachute uses altitude above ground (not home) to check suitability for deployment. 2016-05-05 09:02:25 -07:00
Parameters.cpp Plane: convert tuning to use AP_Tuning library 2016-05-07 18:34:15 +10:00
Parameters.h Plane: smooth-out the end of takeoff pitch by reducing takeoff pitch min via TKOFF_PLIM_SEC 2016-04-21 22:54:17 -07:00
Parameters.pde Plane: added blank Parameters.pde for MissionPlanner 2015-05-30 15:21:33 +09:00
Plane.cpp ArduPlane: use separate header for version macro 2016-05-06 13:11:28 -03:00
Plane.h Plane: convert tuning to use AP_Tuning library 2016-05-07 18:34:15 +10:00
px4_mixer.cpp Plane: Only resend the mixer configuration if its changed 2016-01-29 12:20:14 +11:00
quadplane.cpp Plane: fixed setting of failsafe for motors in quadplane 2016-05-07 07:25:33 +10:00
quadplane.h Plane: convert tuning to use AP_Tuning library 2016-05-07 18:34:15 +10:00
radio.cpp Plane: convert tuning to use AP_Tuning library 2016-05-07 18:34:15 +10:00
release-notes.txt Plane: update release notes for 3.6.0beta1 2016-04-30 14:34:47 +10:00
sensors.cpp Plane: write voltage/current much more frequently 2016-02-29 21:24:54 +11:00
setup.cpp Replace use of UARTDriver::printf_P() with UARTDriver::printf() 2015-10-30 14:35:25 +09:00
system.cpp ArduPlane: use separate header for version macro 2016-05-06 13:11:28 -03:00
takeoff.cpp Plane: prevent a division by zero in takeoff code 2016-04-26 12:06:57 +10:00
test.cpp Plane: refactor perf variables into a structure 2016-04-21 16:45:02 +10:00
tuning.cpp Plane: convert tuning to use AP_Tuning library 2016-05-07 18:34:15 +10:00
tuning.h Plane: convert tuning to use AP_Tuning library 2016-05-07 18:34:15 +10:00
version.h Global: use ap_version.h 2016-05-06 13:11:28 -03:00
wscript waf: create program groups for main products 2016-03-26 15:43:08 -03:00