Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
ardupilot/ArduCopter/test.pde

438 lines
12 KiB
Plaintext
Raw Blame History

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
#if CLI_ENABLED == ENABLED
// These are function definitions so the Menu can be constructed before the functions
// are defined below. Order matters to the compiler.
#if HIL_MODE != HIL_MODE_ATTITUDE && HIL_MODE != HIL_MODE_SENSORS
static int8_t test_baro(uint8_t argc, const Menu::arg *argv);
#endif
static int8_t test_compass(uint8_t argc, const Menu::arg *argv);
static int8_t test_gps(uint8_t argc, const Menu::arg *argv);
static int8_t test_ins(uint8_t argc, const Menu::arg *argv);
static int8_t test_logging(uint8_t argc, const Menu::arg *argv);
static int8_t test_motors(uint8_t argc, const Menu::arg *argv);
static int8_t test_optflow(uint8_t argc, const Menu::arg *argv);
static int8_t test_radio_pwm(uint8_t argc, const Menu::arg *argv);
static int8_t test_radio(uint8_t argc, const Menu::arg *argv);
static int8_t test_relay(uint8_t argc, const Menu::arg *argv);
#if CONFIG_HAL_BOARD == HAL_BOARD_PX4
static int8_t test_shell(uint8_t argc, const Menu::arg *argv);
#endif
#if HIL_MODE != HIL_MODE_ATTITUDE && HIL_MODE != HIL_MODE_SENSORS
static int8_t test_sonar(uint8_t argc, const Menu::arg *argv);
#endif
// Creates a constant array of structs representing menu options
// and stores them in Flash memory, not RAM.
// User enters the string in the console to call the functions on the right.
// See class Menu in AP_Coommon for implementation details
const struct Menu::command test_menu_commands[] PROGMEM = {
#if HIL_MODE != HIL_MODE_ATTITUDE && HIL_MODE != HIL_MODE_SENSORS
{"baro", test_baro},
#endif
{"compass", test_compass},
{"gps", test_gps},
{"ins", test_ins},
{"logging", test_logging},
{"motors", test_motors},
{"optflow", test_optflow},
{"pwm", test_radio_pwm},
{"radio", test_radio},
{"relay", test_relay},
#if CONFIG_HAL_BOARD == HAL_BOARD_PX4
{"shell", test_shell},
#endif
#if HIL_MODE != HIL_MODE_ATTITUDE && HIL_MODE != HIL_MODE_SENSORS
{"sonar", test_sonar},
#endif
};
// A Macro to create the Menu
MENU(test_menu, "test", test_menu_commands);
static int8_t
test_mode(uint8_t argc, const Menu::arg *argv)
{
test_menu.run();
return 0;
}
#if HIL_MODE != HIL_MODE_ATTITUDE && HIL_MODE != HIL_MODE_SENSORS
static int8_t
test_baro(uint8_t argc, const Menu::arg *argv)
{
int32_t alt;
print_hit_enter();
init_barometer();
while(1) {
delay(100);
alt = read_barometer();
if (!barometer.healthy) {
cliSerial->println_P(PSTR("not healthy"));
} else {
cliSerial->printf_P(PSTR("Alt: %0.2fm, Raw: %f Temperature: %.1f\n"),
alt / 100.0,
barometer.get_pressure(),
barometer.get_temperature());
}
if(cliSerial->available() > 0) {
return (0);
}
}
return 0;
}
#endif
static int8_t
test_compass(uint8_t argc, const Menu::arg *argv)
{
uint8_t delta_ms_fast_loop;
uint8_t medium_loopCounter = 0;
if (!g.compass_enabled) {
cliSerial->printf_P(PSTR("Compass: "));
print_enabled(false);
return (0);
}
if (!compass.init()) {
cliSerial->println_P(PSTR("Compass initialisation failed!"));
return 0;
}
ahrs.init();
ahrs.set_fly_forward(true);
ahrs.set_compass(&compass);
report_compass();
// we need the AHRS initialised for this test
ins.init(AP_InertialSensor::COLD_START,
ins_sample_rate);
ahrs.reset();
int16_t counter = 0;
float heading = 0;
print_hit_enter();
while(1) {
delay(20);
if (millis() - fast_loopTimer > 19) {
delta_ms_fast_loop = millis() - fast_loopTimer;
G_Dt = (float)delta_ms_fast_loop / 1000.f; // used by DCM integrator
fast_loopTimer = millis();
// INS
// ---
ahrs.update();
medium_loopCounter++;
if(medium_loopCounter == 5) {
if (compass.read()) {
// Calculate heading
const Matrix3f &m = ahrs.get_dcm_matrix();
heading = compass.calculate_heading(m);
compass.null_offsets();
}
medium_loopCounter = 0;
}
counter++;
if (counter>20) {
if (compass.healthy) {
Vector3f maggy = compass.get_offsets();
cliSerial->printf_P(PSTR("Heading: %ld, XYZ: %d, %d, %d,\tXYZoff: %6.2f, %6.2f, %6.2f\n"),
(wrap_360_cd(ToDeg(heading) * 100)) /100,
(int)compass.mag_x,
(int)compass.mag_y,
(int)compass.mag_z,
maggy.x,
maggy.y,
maggy.z);
} else {
cliSerial->println_P(PSTR("compass not healthy"));
}
counter=0;
}
}
if (cliSerial->available() > 0) {
break;
}
}
// save offsets. This allows you to get sane offset values using
// the CLI before you go flying.
cliSerial->println_P(PSTR("saving offsets"));
compass.save_offsets();
return (0);
}
static int8_t
test_gps(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
delay(1000);
while(1) {
delay(100);
g_gps->update();
if (g_gps->new_data) {
cliSerial->printf_P(PSTR("Lat: "));
print_latlon(cliSerial, g_gps->latitude);
cliSerial->printf_P(PSTR(", Lon "));
print_latlon(cliSerial, g_gps->longitude);
cliSerial->printf_P(PSTR(", Alt: %ldm, #sats: %d\n"),
g_gps->altitude_cm/100,
g_gps->num_sats);
g_gps->new_data = false;
}else{
cliSerial->print_P(PSTR("."));
}
if(cliSerial->available() > 0) {
return (0);
}
}
return 0;
}
static int8_t
test_ins(uint8_t argc, const Menu::arg *argv)
{
Vector3f gyro, accel;
print_hit_enter();
cliSerial->printf_P(PSTR("INS\n"));
delay(1000);
ahrs.init();
ins.init(AP_InertialSensor::COLD_START,
ins_sample_rate);
cliSerial->printf_P(PSTR("...done\n"));
delay(50);
while(1) {
ins.update();
gyro = ins.get_gyro();
accel = ins.get_accel();
float test = accel.length() / GRAVITY_MSS;
cliSerial->printf_P(PSTR("a %7.4f %7.4f %7.4f g %7.4f %7.4f %7.4f t %7.4f \n"),
accel.x, accel.y, accel.z,
gyro.x, gyro.y, gyro.z,
test);
delay(40);
if(cliSerial->available() > 0) {
return (0);
}
}
}
/*
* test the dataflash is working
*/
static int8_t
test_logging(uint8_t argc, const Menu::arg *argv)
{
cliSerial->println_P(PSTR("Testing dataflash logging"));
DataFlash.ShowDeviceInfo(cliSerial);
return 0;
}
static int8_t
test_motors(uint8_t argc, const Menu::arg *argv)
{
cliSerial->printf_P(PSTR(
"Connect battery for this test.\n"
"Motors will spin by frame position order.\n"
"Front (& right of centerline) motor first, then in clockwise order around frame.\n"
"Remember to disconnect battery after this test.\n"
"Any key to exit.\n"));
// ensure all values have been sent to motors
motors.set_update_rate(g.rc_speed);
motors.set_frame_orientation(g.frame_orientation);
motors.set_min_throttle(g.throttle_min);
motors.set_mid_throttle(g.throttle_mid);
// enable motors
init_rc_out();
while(1) {
delay(20);
read_radio();
motors.output_test();
if(cliSerial->available() > 0) {
g.esc_calibrate.set_and_save(0);
return(0);
}
}
}
static int8_t
test_optflow(uint8_t argc, const Menu::arg *argv)
{
#if OPTFLOW == ENABLED
if(g.optflow_enabled) {
cliSerial->printf_P(PSTR("man id: %d\t"),optflow.read_register(ADNS3080_PRODUCT_ID));
print_hit_enter();
while(1) {
delay(200);
optflow.update();
cliSerial->printf_P(PSTR("x/dx: %d/%d\t y/dy %d/%d\t squal:%d\n"),
optflow.x,
optflow.dx,
optflow.y,
optflow.dy,
optflow.surface_quality);
if(cliSerial->available() > 0) {
return (0);
}
}
} else {
cliSerial->printf_P(PSTR("OptFlow: "));
print_enabled(false);
}
return (0);
#else
return (0);
#endif // OPTFLOW == ENABLED
}
static int8_t
test_radio_pwm(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
delay(1000);
while(1) {
delay(20);
// Filters radio input - adjust filters in the radio.pde file
// ----------------------------------------------------------
read_radio();
// servo Yaw
//APM_RC.OutputCh(CH_7, g.rc_4.radio_out);
cliSerial->printf_P(PSTR("IN: 1: %d\t2: %d\t3: %d\t4: %d\t5: %d\t6: %d\t7: %d\t8: %d\n"),
g.rc_1.radio_in,
g.rc_2.radio_in,
g.rc_3.radio_in,
g.rc_4.radio_in,
g.rc_5.radio_in,
g.rc_6.radio_in,
g.rc_7.radio_in,
g.rc_8.radio_in);
if(cliSerial->available() > 0) {
return (0);
}
}
}
static int8_t
test_radio(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
delay(1000);
while(1) {
delay(20);
read_radio();
cliSerial->printf_P(PSTR("IN 1: %d\t2: %d\t3: %d\t4: %d\t5: %d\t6: %d\t7: %d\n"),
g.rc_1.control_in,
g.rc_2.control_in,
g.rc_3.control_in,
g.rc_4.control_in,
g.rc_5.control_in,
g.rc_6.control_in,
g.rc_7.control_in);
if(cliSerial->available() > 0) {
return (0);
}
}
}
static int8_t test_relay(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
delay(1000);
while(1) {
cliSerial->printf_P(PSTR("Relay on\n"));
relay.on();
delay(3000);
if(cliSerial->available() > 0) {
return (0);
}
cliSerial->printf_P(PSTR("Relay off\n"));
relay.off();
delay(3000);
if(cliSerial->available() > 0) {
return (0);
}
}
}
#if CONFIG_HAL_BOARD == HAL_BOARD_PX4
/*
* run a debug shell
*/
static int8_t
test_shell(uint8_t argc, const Menu::arg *argv)
{
hal.util->run_debug_shell(cliSerial);
return 0;
}
#endif
#if HIL_MODE != HIL_MODE_ATTITUDE && HIL_MODE != HIL_MODE_SENSORS
/*
* test the sonar
*/
static int8_t
test_sonar(uint8_t argc, const Menu::arg *argv)
{
#if CONFIG_SONAR == ENABLED
if(g.sonar_enabled == false) {
cliSerial->printf_P(PSTR("Sonar disabled\n"));
return (0);
}
// make sure sonar is initialised
init_sonar();
print_hit_enter();
while(1) {
delay(100);
cliSerial->printf_P(PSTR("Sonar: %d cm\n"), sonar->read());
if(cliSerial->available() > 0) {
return (0);
}
}
#endif
return (0);
}
#endif
static void print_hit_enter()
{
cliSerial->printf_P(PSTR("Hit Enter to exit.\n\n"));
}
#endif // CLI_ENABLED
Reference in New Issue View Git Blame Copy Permalink