ardupilot/libraries/APM_BMP085/APM_BMP085.cpp

/*
	APM_BMP085.cpp - Arduino Library for BMP085 absolute pressure sensor
	Code by Jordi Mu<4D>oz and Jose Julio. DIYDrones.com

	This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) any later version.

	Sensor is conected to I2C port
	Sensor End of Conversion (EOC) pin is PC7 (30)

	Variables:
		RawTemp : Raw temperature data
		RawPress : Raw pressure data

		Temp : Calculated temperature (in 0.1<EFBFBD>C units)
		Press : Calculated pressure   (in Pa units)

	Methods:
		Init() : Initialization of I2C and read sensor calibration data
		Read() : Read sensor data and calculate Temperature and Pressure
		         This function is optimized so the main host don<6F>t need to wait
				 You can call this function in your main loop
				 It returns a 1 if there are new data.

	Internal functions:
		Command_ReadTemp(): Send commando to read temperature
		Command_ReadPress(): Send commando to read Pressure
		ReadTemp() : Read temp register
		ReadPress() : Read press register
		Calculate() : Calculate Temperature and Pressure in real units


*/
extern "C" {
  // AVR LibC Includes
  #include <inttypes.h>
  #include <avr/interrupt.h>
  #include "WConstants.h"
}

#include <Wire.h>
#include "APM_BMP085.h"

#define BMP085_ADDRESS 0x77  //(0xEE >> 1)
#define BMP085_EOC 30        // End of conversion pin PC7

// Constructors ////////////////////////////////////////////////////////////////
APM_BMP085_Class::APM_BMP085_Class()
{
}

// Public Methods //////////////////////////////////////////////////////////////
void APM_BMP085_Class::Init(int initialiseWireLib)
{
	byte buff[22];
	int i = 0;

	pinMode(BMP085_EOC, INPUT);	 // End Of Conversion (PC7) input

	if( initialiseWireLib != 0 )
			Wire.begin();

	oss = 3;					 // Over Sampling setting 3 = High resolution
	BMP085_State = 0;		 // Initial state

  // We read the calibration data registers
	Wire.beginTransmission(BMP085_ADDRESS);
	Wire.send(0xAA);
	Wire.endTransmission();

	Wire.requestFrom(BMP085_ADDRESS, 22);

  //Wire.endTransmission();
	while(Wire.available()){
		buff[i] = Wire.receive();	// receive one byte
		i++;
	}

	ac1 = ((int)buff[0] << 8) | buff[1];
	ac2 = ((int)buff[2] << 8) | buff[3];
	ac3 = ((int)buff[4] << 8) | buff[5];
	ac4 = ((int)buff[6] << 8) | buff[7];
	ac5 = ((int)buff[8] << 8) | buff[9];
	ac6 = ((int)buff[10] << 8) | buff[11];
	b1 = ((int)buff[12] << 8) | buff[13];
	b2 = ((int)buff[14] << 8) | buff[15];
	mb = ((int)buff[16] << 8) | buff[17];
	mc = ((int)buff[18] << 8) | buff[19];
	md = ((int)buff[20] << 8) | buff[21];

  //Send a command to read Temp
	Command_ReadTemp();
	BMP085_State = 1;
}


// Read the sensor. This is a state machine
// We read one time Temperature (state=1) and then 4 times Pressure (states 2-5)
uint8_t APM_BMP085_Class::Read()
{
	uint8_t result = 0;

	if (BMP085_State == 1){
		if (digitalRead(BMP085_EOC)){
			ReadTemp();						 // On state 1 we read temp
			BMP085_State++;
			Command_ReadPress();
		}
	}else{
		if (BMP085_State == 5){
			if (digitalRead(BMP085_EOC)){
				ReadPress();
				Calculate();

				BMP085_State = 1;			// Start again from state = 1
				Command_ReadTemp();			// Read Temp
				result = 1;					// New pressure reading
			}
		}else{
			if (digitalRead(BMP085_EOC)){
				ReadPress();
				Calculate();
				BMP085_State++;
				Command_ReadPress();
				result = 1;					// New pressure reading
			}
		}
	}
	return(result);
}


// Send command to Read Pressure
void APM_BMP085_Class::Command_ReadPress()
{
	Wire.beginTransmission(BMP085_ADDRESS);
	Wire.send(0xF4);
	Wire.send(0x34+(oss << 6));	// write_register(0xF4, 0x34+(oversampling_setting << 6));
	Wire.endTransmission();
}

// Read Raw Pressure values
void APM_BMP085_Class::ReadPress()
{
	byte msb;
	byte lsb;
	byte xlsb;

	Wire.beginTransmission(BMP085_ADDRESS);
	Wire.send(0xF6);
	Wire.endTransmission();

	Wire.requestFrom(BMP085_ADDRESS, 3); // read a byte

	while(!Wire.available()) {
    // waiting
	}

	msb = Wire.receive();

	while(!Wire.available()) {
    // waiting
	}

	lsb = Wire.receive();

	while(!Wire.available()) {
    // waiting
	}

	xlsb = Wire.receive();
	RawPress = (((long)msb << 16) | ((long)lsb << 8) | ((long)xlsb)) >> (8 - oss);
}

// Send Command to Read Temperature
void APM_BMP085_Class::Command_ReadTemp()
{
  Wire.beginTransmission(BMP085_ADDRESS);
  Wire.send(0xF4);
  Wire.send(0x2E);
  Wire.endTransmission();
}

// Read Raw Temperature values
void APM_BMP085_Class::ReadTemp()
{
	byte tmp;
	int16_t tmp2;

	Wire.beginTransmission(BMP085_ADDRESS);
	Wire.send(0xF6);
	Wire.endTransmission();

	Wire.beginTransmission(BMP085_ADDRESS);
	Wire.requestFrom(BMP085_ADDRESS, 2);
	while(!Wire.available());	// wait
	tmp2 = Wire.receive();
	while(!Wire.available());	// wait
	tmp = Wire.receive();
	tmp2 = tmp2 << 8 | tmp;
	if(RawTemp = 0)
		RawTemp = tmp2;
	RawTemp += tmp2;
	RawTemp = RawTemp >> 1;
}

// Calculate Temperature and Pressure in real units.
void APM_BMP085_Class::Calculate()
{
  long x1, x2, x3, b3, b5, b6, p;
  unsigned long b4, b7;
  int32_t tmp;

  // See Datasheet page 13 for this formulas
  // Based also on Jee Labs BMP085 example code. Thanks for share.
  // Temperature calculations
  x1 = ((long)RawTemp - ac6) * ac5 >> 15;
  x2 = ((long) mc << 11) / (x1 + md);
  b5 = x1 + x2;
  Temp = (b5 + 8) >> 4;

  // Pressure calculations
  b6 = b5 - 4000;
  x1 = (b2 * (b6 * b6 >> 12)) >> 11;
  x2 = ac2 * b6 >> 11;
  x3 = x1 + x2;
  //b3 = (((int32_t) ac1 * 4 + x3)<<oss + 2) >> 2; // BAD
  //b3 = ((int32_t) ac1 * 4 + x3 + 2) >> 2;  //OK for oss=0
  tmp = ac1;
  tmp = (tmp*4 + x3)<<oss;
  b3 = (tmp+2)/4;
  x1 = ac3 * b6 >> 13;
  x2 = (b1 * (b6 * b6 >> 12)) >> 16;
  x3 = ((x1 + x2) + 2) >> 2;
  b4 = (ac4 * (uint32_t) (x3 + 32768)) >> 15;
  b7 = ((uint32_t) RawPress - b3) * (50000 >> oss);
  p = b7 < 0x80000000 ? (b7 * 2) / b4 : (b7 / b4) * 2;

  x1 = (p >> 8) * (p >> 8);
  x1 = (x1 * 3038) >> 16;
  x2 = (-7357 * p) >> 16;
  Press = p + ((x1 + x2 + 3791) >> 4);
}

// Constructors ////////////////////////////////////////////////////////////////
APM_BMP085_HIL_Class::APM_BMP085_HIL_Class()
{
}

// Public Methods //////////////////////////////////////////////////////////////
void APM_BMP085_HIL_Class::Init(int initialiseWireLib)
{
  BMP085_State=1;
}


// Read the sensor. This is a state machine
// We read one time Temperature (state = 1) and then 4 times Pressure (states 2-5)
uint8_t APM_BMP085_HIL_Class::Read()
{
	uint8_t result = 0;

	if (BMP085_State == 1){
		BMP085_State++;
	}else{

		if (BMP085_State == 5){
			BMP085_State = 1;				// Start again from state = 1
			result = 1;						// New pressure reading
		}else{
			BMP085_State++;
			result = 1;						// New pressure reading
		}
	}
	return(result);
}

void APM_BMP085_HIL_Class::setHIL(float _Temp, float _Press)
{
    // TODO: map floats to raw
	Temp 	= _Temp;
	Press 	= _Press;
}