ardupilot/libraries/AP_HAL_ChibiOS/hwdef/mRoControlZeroClassic/hwdef-bl.dat

65 lines
1.7 KiB
Plaintext

###########################################################################################################################################################
# hw definition file for processing by chibios_hwdef.py
# STM32H743ZIT6
# mRo Control Zero Classic flight controller
# 12x PWM / IO - DMA capable and switchable 3.3v (default) / 5v Logic
# A Dual CAN based flight controller
# 3x IMUs (BMI088 6DOF, ICM20602 6DOF, ICM20948 9DOF)
# Baro, FRAM (256kb), SDCARD Socket, JTAG
# 5x UARTs (2x with hardware flow control), 2x CAN, 1x SPI, 2x I2C
# Onboard 3 color LED and buzzer
# Identical case and connector layout to the original 3DR / mRo Pixhawk
# M10048B - Initial Release
###########################################################################################################################################################
# MCU class and specific type
MCU STM32H7xx STM32H743xx
# USB setup
USB_STRING_MANUFACTURER "mRo"
# crystal frequency
OSCILLATOR_HZ 24000000
# board ID for firmware load
APJ_BOARD_ID 1022
FLASH_SIZE_KB 2048
# bootloader is installed at zero offset
FLASH_RESERVE_START_KB 0
# the location where the bootloader will put the firmware
FLASH_BOOTLOADER_LOAD_KB 128
PB4 LED_BOOTLOADER OUTPUT
# define all 3 to make LED output White.
PB1 LED_ACTIVITY OUTPUT
PB3 LED_ACTIVITY2 OUTPUT
# PB11 LED_ACTIVITY3 OUTPUT
define HAL_LED_ON 0
# order of UARTs (and USB)
SERIAL_ORDER OTG1
PA11 OTG_FS_DM OTG1
PA12 OTG_FS_DP OTG1
PA13 JTMS-SWDIO SWD
PA14 JTCK-SWCLK SWD
define HAL_USE_EMPTY_STORAGE 1
define HAL_STORAGE_SIZE 16384
# Add CS pins to ensure they are high in bootloader
PD7 BARO_CS CS
PD10 FRAM_CS CS SPEED_VERYLOW
PE15 ICM_20948_CS CS
PF0 BMI088_ACCEL_CS CS
PF10 BMI088_GYRO_CS CS
PG3 ICM_20602_CS CS
PG9 EXT_SPI_CS CS
#PG10 EXT_SPI_CS CS