ardupilot/libraries/AP_L1_Control/AP_L1_Control.cpp

506 lines
19 KiB
C++

#include <AP_HAL/AP_HAL.h>
#include "AP_L1_Control.h"
extern const AP_HAL::HAL& hal;
// table of user settable parameters
const AP_Param::GroupInfo AP_L1_Control::var_info[] = {
// @Param: PERIOD
// @DisplayName: L1 control period
// @Description: Period in seconds of L1 tracking loop. This parameter is the primary control for agressiveness of turns in auto mode. This needs to be larger for less responsive airframes. The default of 20 is quite conservative, but for most RC aircraft will lead to reasonable flight. For smaller more agile aircraft a value closer to 15 is appropriate, or even as low as 10 for some very agile aircraft. When tuning, change this value in small increments, as a value that is much too small (say 5 or 10 below the right value) can lead to very radical turns, and a risk of stalling.
// @Units: s
// @Range: 1 60
// @Increment: 1
// @User: Standard
AP_GROUPINFO("PERIOD", 0, AP_L1_Control, _L1_period, 17),
// @Param: DAMPING
// @DisplayName: L1 control damping ratio
// @Description: Damping ratio for L1 control. Increase this in increments of 0.05 if you are getting overshoot in path tracking. You should not need a value below 0.7 or above 0.85.
// @Range: 0.6 1.0
// @Increment: 0.05
// @User: Advanced
AP_GROUPINFO("DAMPING", 1, AP_L1_Control, _L1_damping, 0.75f),
// @Param: XTRACK_I
// @DisplayName: L1 control crosstrack integrator gain
// @Description: Crosstrack error integrator gain. This gain is applied to the crosstrack error to ensure it converges to zero. Set to zero to disable. Smaller values converge slower, higher values will cause crosstrack error oscillation.
// @Range: 0 0.1
// @Increment: 0.01
// @User: Advanced
AP_GROUPINFO("XTRACK_I", 2, AP_L1_Control, _L1_xtrack_i_gain, 0.02),
// @Param: LIM_BANK
// @DisplayName: Loiter Radius Bank Angle Limit
// @Description: The sealevel bank angle limit for a continous loiter. (Used to calculate airframe loading limits at higher altitudes). Setting to 0, will instead just scale the loiter radius directly
// @Units: deg
// @Range: 0 89
// @User: Advanced
AP_GROUPINFO_FRAME("LIM_BANK", 3, AP_L1_Control, _loiter_bank_limit, 0.0f, AP_PARAM_FRAME_PLANE),
AP_GROUPEND
};
//Bank angle command based on angle between aircraft velocity vector and reference vector to path.
//S. Park, J. Deyst, and J. P. How, "A New Nonlinear Guidance Logic for Trajectory Tracking,"
//Proceedings of the AIAA Guidance, Navigation and Control
//Conference, Aug 2004. AIAA-2004-4900.
//Modified to use PD control for circle tracking to enable loiter radius less than L1 length
//Modified to enable period and damping of guidance loop to be set explicitly
//Modified to provide explicit control over capture angle
/*
Wrap AHRS yaw if in reverse - radians
*/
float AP_L1_Control::get_yaw()
{
if (_reverse) {
return wrap_PI(M_PI + _ahrs.yaw);
}
return _ahrs.yaw;
}
/*
Wrap AHRS yaw sensor if in reverse - centi-degress
*/
int32_t AP_L1_Control::get_yaw_sensor() const
{
if (_reverse) {
return wrap_180_cd(18000 + _ahrs.yaw_sensor);
}
return _ahrs.yaw_sensor;
}
/*
return the bank angle needed to achieve tracking from the last
update_*() operation
*/
int32_t AP_L1_Control::nav_roll_cd(void) const
{
float ret;
ret = cosf(_ahrs.pitch)*degrees(atanf(_latAccDem * 0.101972f) * 100.0f); // 0.101972 = 1/9.81
ret = constrain_float(ret, -9000, 9000);
return ret;
}
/*
return the lateral acceleration needed to achieve tracking from the last
update_*() operation
*/
float AP_L1_Control::lateral_acceleration(void) const
{
return _latAccDem;
}
int32_t AP_L1_Control::nav_bearing_cd(void) const
{
return wrap_180_cd(RadiansToCentiDegrees(_nav_bearing));
}
int32_t AP_L1_Control::bearing_error_cd(void) const
{
return RadiansToCentiDegrees(_bearing_error);
}
int32_t AP_L1_Control::target_bearing_cd(void) const
{
return wrap_180_cd(_target_bearing_cd);
}
/*
this is the turn distance assuming a 90 degree turn
*/
float AP_L1_Control::turn_distance(float wp_radius) const
{
wp_radius *= sq(_ahrs.get_EAS2TAS());
return MIN(wp_radius, _L1_dist);
}
/*
this approximates the turn distance for a given turn angle. If the
turn_angle is > 90 then a 90 degree turn distance is used, otherwise
the turn distance is reduced linearly.
This function allows straight ahead mission legs to avoid thinking
they have reached the waypoint early, which makes things like camera
trigger and ball drop at exact positions under mission control much easier
*/
float AP_L1_Control::turn_distance(float wp_radius, float turn_angle) const
{
float distance_90 = turn_distance(wp_radius);
turn_angle = fabsf(turn_angle);
if (turn_angle >= 90) {
return distance_90;
}
return distance_90 * turn_angle / 90.0f;
}
float AP_L1_Control::loiter_radius(const float radius) const
{
// prevent an insane loiter bank limit
float sanitized_bank_limit = constrain_float(_loiter_bank_limit, 0.0f, 89.0f);
float lateral_accel_sea_level = tanf(radians(sanitized_bank_limit)) * GRAVITY_MSS;
float nominal_velocity_sea_level;
if(_spdHgtControl == nullptr) {
nominal_velocity_sea_level = 0.0f;
} else {
nominal_velocity_sea_level = _spdHgtControl->get_target_airspeed();
}
float eas2tas_sq = sq(_ahrs.get_EAS2TAS());
if (is_zero(sanitized_bank_limit) || is_zero(nominal_velocity_sea_level) ||
is_zero(lateral_accel_sea_level)) {
// Missing a sane input for calculating the limit, or the user has
// requested a straight scaling with altitude. This will always vary
// with the current altitude, but will at least protect the airframe
return radius * eas2tas_sq;
} else {
float sea_level_radius = sq(nominal_velocity_sea_level) / lateral_accel_sea_level;
if (sea_level_radius > radius) {
// If we've told the plane that its sea level radius is unachievable fallback to
// straight altitude scaling
return radius * eas2tas_sq;
} else {
// select the requested radius, or the required altitude scale, whichever is safer
return MAX(sea_level_radius * eas2tas_sq, radius);
}
}
}
bool AP_L1_Control::reached_loiter_target(void)
{
return _WPcircle;
}
/**
prevent indecision in our turning by using our previous turn
decision if we are in a narrow angle band pointing away from the
target and the turn angle has changed sign
*/
void AP_L1_Control::_prevent_indecision(float &Nu)
{
const float Nu_limit = 0.9f*M_PI;
if (fabsf(Nu) > Nu_limit &&
fabsf(_last_Nu) > Nu_limit &&
labs(wrap_180_cd(_target_bearing_cd - get_yaw_sensor())) > 12000 &&
Nu * _last_Nu < 0.0f) {
// we are moving away from the target waypoint and pointing
// away from the waypoint (not flying backwards). The sign
// of Nu has also changed, which means we are
// oscillating in our decision about which way to go
Nu = _last_Nu;
}
}
// update L1 control for waypoint navigation
void AP_L1_Control::update_waypoint(const struct Location &prev_WP, const struct Location &next_WP, float dist_min)
{
struct Location _current_loc;
float Nu;
float xtrackVel;
float ltrackVel;
uint32_t now = AP_HAL::micros();
float dt = (now - _last_update_waypoint_us) * 1.0e-6f;
if (dt > 1) {
// controller hasn't been called for an extended period of
// time. Reinitialise it.
_L1_xtrack_i = 0.0f;
}
if (dt > 0.1) {
dt = 0.1;
}
_last_update_waypoint_us = now;
// Calculate L1 gain required for specified damping
float K_L1 = 4.0f * _L1_damping * _L1_damping;
// Get current position and velocity
if (_ahrs.get_position(_current_loc) == false) {
// if no GPS loc available, maintain last nav/target_bearing
_data_is_stale = true;
return;
}
Vector2f _groundspeed_vector = _ahrs.groundspeed_vector();
// update _target_bearing_cd
_target_bearing_cd = _current_loc.get_bearing_to(next_WP);
//Calculate groundspeed
float groundSpeed = _groundspeed_vector.length();
if (groundSpeed < 0.1f) {
// use a small ground speed vector in the right direction,
// allowing us to use the compass heading at zero GPS velocity
groundSpeed = 0.1f;
_groundspeed_vector = Vector2f(cosf(get_yaw()), sinf(get_yaw())) * groundSpeed;
}
// Calculate time varying control parameters
// Calculate the L1 length required for specified period
// 0.3183099 = 1/1/pipi
_L1_dist = MAX(0.3183099f * _L1_damping * _L1_period * groundSpeed, dist_min);
// Calculate the NE position of WP B relative to WP A
Vector2f AB = prev_WP.get_distance_NE(next_WP);
float AB_length = AB.length();
// Check for AB zero length and track directly to the destination
// if too small
if (AB.length() < 1.0e-6f) {
AB = _current_loc.get_distance_NE(next_WP);
if (AB.length() < 1.0e-6f) {
AB = Vector2f(cosf(get_yaw()), sinf(get_yaw()));
}
}
AB.normalize();
// Calculate the NE position of the aircraft relative to WP A
const Vector2f A_air = prev_WP.get_distance_NE(_current_loc);
// calculate distance to target track, for reporting
_crosstrack_error = A_air % AB;
//Determine if the aircraft is behind a +-135 degree degree arc centred on WP A
//and further than L1 distance from WP A. Then use WP A as the L1 reference point
//Otherwise do normal L1 guidance
float WP_A_dist = A_air.length();
float alongTrackDist = A_air * AB;
if (WP_A_dist > _L1_dist && alongTrackDist/MAX(WP_A_dist, 1.0f) < -0.7071f)
{
//Calc Nu to fly To WP A
Vector2f A_air_unit = (A_air).normalized(); // Unit vector from WP A to aircraft
xtrackVel = _groundspeed_vector % (-A_air_unit); // Velocity across line
ltrackVel = _groundspeed_vector * (-A_air_unit); // Velocity along line
Nu = atan2f(xtrackVel,ltrackVel);
_nav_bearing = atan2f(-A_air_unit.y , -A_air_unit.x); // bearing (radians) from AC to L1 point
} else if (alongTrackDist > AB_length + groundSpeed*3) {
// we have passed point B by 3 seconds. Head towards B
// Calc Nu to fly To WP B
const Vector2f B_air = next_WP.get_distance_NE(_current_loc);
Vector2f B_air_unit = (B_air).normalized(); // Unit vector from WP B to aircraft
xtrackVel = _groundspeed_vector % (-B_air_unit); // Velocity across line
ltrackVel = _groundspeed_vector * (-B_air_unit); // Velocity along line
Nu = atan2f(xtrackVel,ltrackVel);
_nav_bearing = atan2f(-B_air_unit.y , -B_air_unit.x); // bearing (radians) from AC to L1 point
} else { //Calc Nu to fly along AB line
//Calculate Nu2 angle (angle of velocity vector relative to line connecting waypoints)
xtrackVel = _groundspeed_vector % AB; // Velocity cross track
ltrackVel = _groundspeed_vector * AB; // Velocity along track
float Nu2 = atan2f(xtrackVel,ltrackVel);
//Calculate Nu1 angle (Angle to L1 reference point)
float sine_Nu1 = _crosstrack_error/MAX(_L1_dist, 0.1f);
//Limit sine of Nu1 to provide a controlled track capture angle of 45 deg
sine_Nu1 = constrain_float(sine_Nu1, -0.7071f, 0.7071f);
float Nu1 = asinf(sine_Nu1);
// compute integral error component to converge to a crosstrack of zero when traveling
// straight but reset it when disabled or if it changes. That allows for much easier
// tuning by having it re-converge each time it changes.
if (_L1_xtrack_i_gain <= 0 || !is_equal(_L1_xtrack_i_gain.get(), _L1_xtrack_i_gain_prev)) {
_L1_xtrack_i = 0;
_L1_xtrack_i_gain_prev = _L1_xtrack_i_gain;
} else if (fabsf(Nu1) < radians(5)) {
_L1_xtrack_i += Nu1 * _L1_xtrack_i_gain * dt;
// an AHRS_TRIM_X=0.1 will drift to about 0.08 so 0.1 is a good worst-case to clip at
_L1_xtrack_i = constrain_float(_L1_xtrack_i, -0.1f, 0.1f);
}
// to converge to zero we must push Nu1 harder
Nu1 += _L1_xtrack_i;
Nu = Nu1 + Nu2;
_nav_bearing = atan2f(AB.y, AB.x) + Nu1; // bearing (radians) from AC to L1 point
}
_prevent_indecision(Nu);
_last_Nu = Nu;
//Limit Nu to +-(pi/2)
Nu = constrain_float(Nu, -1.5708f, +1.5708f);
_latAccDem = K_L1 * groundSpeed * groundSpeed / _L1_dist * sinf(Nu);
// Waypoint capture status is always false during waypoint following
_WPcircle = false;
_bearing_error = Nu; // bearing error angle (radians), +ve to left of track
_data_is_stale = false; // status are correctly updated with current waypoint data
}
// update L1 control for loitering
void AP_L1_Control::update_loiter(const struct Location &center_WP, float radius, int8_t loiter_direction)
{
struct Location _current_loc;
// scale loiter radius with square of EAS2TAS to allow us to stay
// stable at high altitude
radius = loiter_radius(fabsf(radius));
// Calculate guidance gains used by PD loop (used during circle tracking)
float omega = (6.2832f / _L1_period);
float Kx = omega * omega;
float Kv = 2.0f * _L1_damping * omega;
// Calculate L1 gain required for specified damping (used during waypoint capture)
float K_L1 = 4.0f * _L1_damping * _L1_damping;
//Get current position and velocity
if (_ahrs.get_position(_current_loc) == false) {
// if no GPS loc available, maintain last nav/target_bearing
_data_is_stale = true;
return;
}
Vector2f _groundspeed_vector = _ahrs.groundspeed_vector();
//Calculate groundspeed
float groundSpeed = MAX(_groundspeed_vector.length() , 1.0f);
// update _target_bearing_cd
_target_bearing_cd = _current_loc.get_bearing_to(center_WP);
// Calculate time varying control parameters
// Calculate the L1 length required for specified period
// 0.3183099 = 1/pi
_L1_dist = 0.3183099f * _L1_damping * _L1_period * groundSpeed;
//Calculate the NE position of the aircraft relative to WP A
const Vector2f A_air = center_WP.get_distance_NE(_current_loc);
// Calculate the unit vector from WP A to aircraft
// protect against being on the waypoint and having zero velocity
// if too close to the waypoint, use the velocity vector
// if the velocity vector is too small, use the heading vector
Vector2f A_air_unit;
if (A_air.length() > 0.1f) {
A_air_unit = A_air.normalized();
} else {
if (_groundspeed_vector.length() < 0.1f) {
A_air_unit = Vector2f(cosf(_ahrs.yaw), sinf(_ahrs.yaw));
} else {
A_air_unit = _groundspeed_vector.normalized();
}
}
//Calculate Nu to capture center_WP
float xtrackVelCap = A_air_unit % _groundspeed_vector; // Velocity across line - perpendicular to radial inbound to WP
float ltrackVelCap = - (_groundspeed_vector * A_air_unit); // Velocity along line - radial inbound to WP
float Nu = atan2f(xtrackVelCap,ltrackVelCap);
_prevent_indecision(Nu);
_last_Nu = Nu;
Nu = constrain_float(Nu, -M_PI_2, M_PI_2); //Limit Nu to +- Pi/2
//Calculate lat accln demand to capture center_WP (use L1 guidance law)
float latAccDemCap = K_L1 * groundSpeed * groundSpeed / _L1_dist * sinf(Nu);
//Calculate radial position and velocity errors
float xtrackVelCirc = -ltrackVelCap; // Radial outbound velocity - reuse previous radial inbound velocity
float xtrackErrCirc = A_air.length() - radius; // Radial distance from the loiter circle
// keep crosstrack error for reporting
_crosstrack_error = xtrackErrCirc;
//Calculate PD control correction to circle waypoint_ahrs.roll
float latAccDemCircPD = (xtrackErrCirc * Kx + xtrackVelCirc * Kv);
//Calculate tangential velocity
float velTangent = xtrackVelCap * float(loiter_direction);
//Prevent PD demand from turning the wrong way by limiting the command when flying the wrong way
if (ltrackVelCap < 0.0f && velTangent < 0.0f) {
latAccDemCircPD = MAX(latAccDemCircPD, 0.0f);
}
// Calculate centripetal acceleration demand
float latAccDemCircCtr = velTangent * velTangent / MAX((0.5f * radius), (radius + xtrackErrCirc));
//Sum PD control and centripetal acceleration to calculate lateral manoeuvre demand
float latAccDemCirc = loiter_direction * (latAccDemCircPD + latAccDemCircCtr);
// Perform switchover between 'capture' and 'circle' modes at the
// point where the commands cross over to achieve a seamless transfer
// Only fly 'capture' mode if outside the circle
if (xtrackErrCirc > 0.0f && loiter_direction * latAccDemCap < loiter_direction * latAccDemCirc) {
_latAccDem = latAccDemCap;
_WPcircle = false;
_bearing_error = Nu; // angle between demanded and achieved velocity vector, +ve to left of track
_nav_bearing = atan2f(-A_air_unit.y , -A_air_unit.x); // bearing (radians) from AC to L1 point
} else {
_latAccDem = latAccDemCirc;
_WPcircle = true;
_bearing_error = 0.0f; // bearing error (radians), +ve to left of track
_nav_bearing = atan2f(-A_air_unit.y , -A_air_unit.x); // bearing (radians)from AC to L1 point
}
_data_is_stale = false; // status are correctly updated with current waypoint data
}
// update L1 control for heading hold navigation
void AP_L1_Control::update_heading_hold(int32_t navigation_heading_cd)
{
// Calculate normalised frequency for tracking loop
const float omegaA = 4.4428f/_L1_period; // sqrt(2)*pi/period
// Calculate additional damping gain
int32_t Nu_cd;
float Nu;
// copy to _target_bearing_cd and _nav_bearing
_target_bearing_cd = wrap_180_cd(navigation_heading_cd);
_nav_bearing = radians(navigation_heading_cd * 0.01f);
Nu_cd = _target_bearing_cd - wrap_180_cd(_ahrs.yaw_sensor);
Nu_cd = wrap_180_cd(Nu_cd);
Nu = radians(Nu_cd * 0.01f);
Vector2f _groundspeed_vector = _ahrs.groundspeed_vector();
//Calculate groundspeed
float groundSpeed = _groundspeed_vector.length();
// Calculate time varying control parameters
_L1_dist = groundSpeed / omegaA; // L1 distance is adjusted to maintain a constant tracking loop frequency
float VomegaA = groundSpeed * omegaA;
// Waypoint capture status is always false during heading hold
_WPcircle = false;
_crosstrack_error = 0;
_bearing_error = Nu; // bearing error angle (radians), +ve to left of track
// Limit Nu to +-pi
Nu = constrain_float(Nu, -M_PI_2, M_PI_2);
_latAccDem = 2.0f*sinf(Nu)*VomegaA;
_data_is_stale = false; // status are correctly updated with current waypoint data
}
// update L1 control for level flight on current heading
void AP_L1_Control::update_level_flight(void)
{
// copy to _target_bearing_cd and _nav_bearing
_target_bearing_cd = _ahrs.yaw_sensor;
_nav_bearing = _ahrs.yaw;
_bearing_error = 0;
_crosstrack_error = 0;
// Waypoint capture status is always false during heading hold
_WPcircle = false;
_latAccDem = 0;
_data_is_stale = false; // status are correctly updated with current waypoint data
}