mirror of https://github.com/ArduPilot/ardupilot
143 lines
6.6 KiB
XML
143 lines
6.6 KiB
XML
<?xml version='1.0'?>
|
|
<mavlink>
|
|
<include>common.xml</include>
|
|
<version>3</version>
|
|
<enums>
|
|
<enum name="AUTOQUAD_NAV_STATUS">
|
|
<description>Available operating modes/statuses for AutoQuad flight controller.
|
|
Bitmask up to 32 bits. Low side bits for base modes, high side for
|
|
additional active features/modifiers/constraints.</description>
|
|
<entry value="0" name="AQ_NAV_STATUS_INIT">
|
|
<description>System is initializing</description>
|
|
</entry>
|
|
<!-- low side basic mode bits -->
|
|
<entry value="0x1" name="AQ_NAV_STATUS_STANDBY">
|
|
<description>System is standing by, not active</description>
|
|
</entry>
|
|
<entry value="0x2" name="AQ_NAV_STATUS_MANUAL">
|
|
<description>Stabilized, under full manual control</description>
|
|
</entry>
|
|
<entry value="0x4" name="AQ_NAV_STATUS_ALTHOLD">
|
|
<description>Altitude hold engaged</description>
|
|
</entry>
|
|
<entry value="0x8" name="AQ_NAV_STATUS_POSHOLD">
|
|
<description>Position hold engaged</description>
|
|
</entry>
|
|
<entry value="0x10" name="AQ_NAV_STATUS_DVH">
|
|
<description>Dynamic Velocity Hold is active</description>
|
|
</entry>
|
|
<entry value="0x20" name="AQ_NAV_STATUS_MISSION">
|
|
<description>Autonomous mission execution mode</description>
|
|
</entry>
|
|
|
|
<!-- high side feature/modifier/constraint bits (0x8000 0000 = bit 32) -->
|
|
<entry value="0x80000000" name="AQ_NAV_STATUS_FAILSAFE">
|
|
<description>System is in failsafe recovery mode</description>
|
|
</entry>
|
|
<entry value="0x40000000" name="AQ_NAV_STATUS_RTH">
|
|
<description>Automatic Return to Home is active</description>
|
|
</entry>
|
|
<entry value="0x20000000" name="AQ_NAV_STATUS_HF_LOCKED">
|
|
<description>Heading-Free locked mode active</description>
|
|
</entry>
|
|
<entry value="0x10000000" name="AQ_NAV_STATUS_HF_DYNAMIC">
|
|
<description>Heading-Free dynamic mode active</description>
|
|
</entry>
|
|
<entry value="0x8000000" name="AQ_NAV_STATUS_CEILING">
|
|
<description>Ceiling altitude is set</description>
|
|
</entry>
|
|
<entry value="0x4000000" name="AQ_NAV_STATUS_CEILING_REACHED">
|
|
<description>Craft is at ceiling altitude</description>
|
|
</entry>
|
|
</enum>
|
|
<enum name="MAV_CMD">
|
|
<!-- TODO: value 1 reserved for now due to legacy code -->
|
|
<entry value="2" name="MAV_CMD_AQ_TELEMETRY">
|
|
<description>Start/stop AutoQuad telemetry values stream.</description>
|
|
<param index="1">Start or stop (1 or 0)</param>
|
|
<param index="2">Stream frequency in us</param>
|
|
<param index="3">Dataset ID (refer to aq_mavlink.h::mavlinkCustomDataSets enum in AQ flight controller code)</param>
|
|
<param index="4">Empty</param>
|
|
<param index="5">Empty</param>
|
|
<param index="6">Empty</param>
|
|
<param index="7">Empty</param>
|
|
</entry>
|
|
<entry value="3" name="MAV_CMD_AQ_FOLLOW">
|
|
<description>Command AutoQuad to go to a particular place at a set speed.</description>
|
|
<param index="1">Latitude</param>
|
|
<param index="2">Lontitude</param>
|
|
<param index="3">Altitude</param>
|
|
<param index="4">Speed</param>
|
|
<param index="5">Empty</param>
|
|
<param index="6">Empty</param>
|
|
<param index="7">Empty</param>
|
|
</entry>
|
|
<entry value="4" name="MAV_CMD_AQ_REQUEST_VERSION">
|
|
<description>Request AutoQuad firmware version number.</description>
|
|
<param index="1">Empty</param>
|
|
<param index="2">Empty</param>
|
|
<param index="3">Empty</param>
|
|
<param index="4">Empty</param>
|
|
<param index="5">Empty</param>
|
|
<param index="6">Empty</param>
|
|
<param index="7">Empty</param>
|
|
</entry>
|
|
</enum>
|
|
<!-- extend MAV_DATA_STREAM -->
|
|
<enum name="MAV_DATA_STREAM">
|
|
<entry value="13" name="MAV_DATA_STREAM_PROPULSION">
|
|
<description>Motor/ESC telemetry data.</description>
|
|
</entry>
|
|
</enum>
|
|
</enums>
|
|
<messages>
|
|
<message id="150" name="AQ_TELEMETRY_F">
|
|
<description>Sends up to 20 raw float values.</description>
|
|
<field type="uint16_t" name="Index">Index of message</field>
|
|
<field type="float" name="value1">value1</field>
|
|
<field type="float" name="value2">value2</field>
|
|
<field type="float" name="value3">value3</field>
|
|
<field type="float" name="value4">value4</field>
|
|
<field type="float" name="value5">value5</field>
|
|
<field type="float" name="value6">value6</field>
|
|
<field type="float" name="value7">value7</field>
|
|
<field type="float" name="value8">value8</field>
|
|
<field type="float" name="value9">value9</field>
|
|
<field type="float" name="value10">value10</field>
|
|
<field type="float" name="value11">value11</field>
|
|
<field type="float" name="value12">value12</field>
|
|
<field type="float" name="value13">value13</field>
|
|
<field type="float" name="value14">value14</field>
|
|
<field type="float" name="value15">value15</field>
|
|
<field type="float" name="value16">value16</field>
|
|
<field type="float" name="value17">value17</field>
|
|
<field type="float" name="value18">value18</field>
|
|
<field type="float" name="value19">value19</field>
|
|
<field type="float" name="value20">value20</field>
|
|
</message>
|
|
<message id="152" name="AQ_ESC_TELEMETRY">
|
|
<description>Sends ESC32 telemetry data for up to 4 motors. Multiple messages may be sent in sequence when system has > 4 motors. Data is described as follows:
|
|
// unsigned int state : 3;
|
|
// unsigned int vin : 12; // x 100
|
|
// unsigned int amps : 14; // x 100
|
|
// unsigned int rpm : 15;
|
|
// unsigned int duty : 8; // x (255/100)
|
|
// - Data Version 2 -
|
|
// unsigned int errors : 9; // Bad detects error count
|
|
// - Data Version 3 -
|
|
// unsigned int temp : 9; // (Deg C + 32) * 4
|
|
// unsigned int errCode : 3;
|
|
</description>
|
|
<field type="uint32_t" name="time_boot_ms">Timestamp of the component clock since boot time in ms.</field>
|
|
<field type="uint8_t" name="seq">Sequence number of message (first set of 4 motors is #1, next 4 is #2, etc).</field>
|
|
<field type="uint8_t" name="num_motors">Total number of active ESCs/motors on the system.</field>
|
|
<field type="uint8_t" name="num_in_seq">Number of active ESCs in this sequence (1 through this many array members will be populated with data)</field>
|
|
<field type="uint8_t[4]" name="escid">ESC/Motor ID</field>
|
|
<field type="uint16_t[4]" name="status_age">Age of each ESC telemetry reading in ms compared to boot time. A value of 0xFFFF means timeout/no data.</field>
|
|
<field type="uint8_t[4]" name="data_version">Version of data structure (determines contents).</field>
|
|
<field type="uint32_t[4]" name="data0">Data bits 1-32 for each ESC.</field>
|
|
<field type="uint32_t[4]" name="data1">Data bits 33-64 for each ESC.</field>
|
|
</message>
|
|
</messages>
|
|
</mavlink>
|