ardupilot/mk/PX4/ROMFS/init.d/rc.APM

#!nsh

# APM startup script for NuttX on PX4

# To disable APM startup add a /fs/microsd/APM/nostart file
# To enable mkblctrl startup add a /fs/microsd/APM/mkblctrl file
# To enable PWM on FMUv1 on ttyS1 add a /fs/microsd/APM/AUXPWM.en file

set deviceA /dev/ttyACM0

# check for an old file called APM, caused by 
# a bug in an earlier firmware release
if [ -f /fs/microsd/APM ]
then
   echo "APM file found - renaming"
   mv /fs/microsd/APM /fs/microsd/APM.old
fi

if [ -f /fs/microsd/APM/nostart ]
then
   echo "APM/nostart found - skipping APM startup"
   sh /etc/init.d/rc.error
fi

# mount binfs so we can find the built-in apps
if [ -f /bin/reboot ]
then
	echo "binfs already mounted"
else
	echo "Mounting binfs"
        if mount -t binfs /dev/null /bin
        then
                echo "binfs mounted OK"
        else
                sh /etc/init.d/rc.error
        fi
fi

set sketch NONE
set logfile /fs/microsd/APM/boot.log

if [ ! -f /bin/ArduPilot ]
then
   echo "/bin/ardupilot not found"
   sh /etc/init.d/rc.error
fi

if mkdir /fs/microsd/APM > /dev/null
then
     echo "Created APM directory"
fi

if [ -f /bin/lsm303d ]
then
     echo "Detected FMUv2 board"
     set BOARD FMUv2
else
     echo "Detected FMUv1 board"
     set BOARD FMUv1
fi

if [ $BOARD == FMUv1 ]
then
   set deviceC /dev/ttyS2
   if [ -f /fs/microsd/APM/AUXPWM.en ]
   then
      set deviceD /dev/null
   else
      set deviceD /dev/ttyS1
   fi
else
   set deviceC /dev/ttyS1
   set deviceD /dev/ttyS2
fi

if uorb start
then
    echo "uorb started OK"
else
    sh /etc/init.d/rc.error
fi


# try the px4io start twice. Some FMUv2 board don't
# come up the first time
set HAVE_PX4IO false
if px4io start
then
    set HAVE_PX4IO true
else
    # it may be in bootloader mode
    echo Loading /etc/px4io/px4io.bin
    tone_alarm MBABGP
    if px4io update /etc/px4io/px4io.bin
    then
	echo "upgraded PX4IO firmware OK"
        tone_alarm MSPAA
    else
	echo "Failed to upgrade PX4IO firmware"
        tone_alarm MNGGG
    fi
    sleep 1
    if px4io start
    then
        set HAVE_PX4IO true
        # play happy tune again
	tone_alarm start
    fi
fi

if [ $HAVE_PX4IO == true ]
then
    echo "PX4IO board OK"
    echo "PX4IO board OK" >> $logfile
    if px4io checkcrc /etc/px4io/px4io.bin
    then
        echo "PX4IO CRC OK"
        echo "PX4IO CRC OK" >> $logfile    
    else
        echo "PX4IO CRC failure"
        echo "PX4IO CRC failure" >> $logfile    
        tone_alarm MBABGP
        if px4io forceupdate 14662 /etc/px4io/px4io.bin
        then
               sleep 1
               if px4io start
               then
                  echo "PX4IO restart OK"
                  echo "PX4IO restart OK" >> $logfile    
                  tone_alarm MSPAA
               else
                  echo "PX4IO restart failed"
                  echo "PX4IO restart failed" >> $logfile    
                  tone_alarm MNGGG
                  sh /etc/init.d/rc.error
               fi
        else
               echo "PX4IO update failed"
               echo "PX4IO update failed" >> $logfile    
               tone_alarm MNGGG
        fi
    fi
else
    echo "No PX4IO board found"
    echo "No PX4IO board found" >> $logfile

    if [ $BOARD == FMUv2 ]
    then
       sh /etc/init.d/rc.error
    fi

    if [ -f /fs/microsd/APM/mkblctrl ]
    then
   	echo "APM/mkblctrl found - switch to MK I2C ESCs"
   	echo "APM/mkblctrl found - switch to MK I2C ESCs" >> $logfile
	echo "Setting up mkblctrl driver"
	echo "Setting up mkblctrl driver" >> $logfile
	mkblctrl -mkmode x
    fi
fi

if [ $BOARD == FMUv1 -a $deviceD == /dev/ttyS1 ]
then
        echo "Setting FMU mode_serial"
        fmu mode_serial
else
        echo "Setting FMU mode_pwm"
        fmu mode_pwm
fi


echo "Starting APM sensors"
echo "Starting APM sensors" > $logfile
if ms5611 start
then
    echo "ms5611 started OK"
else
    sh /etc/init.d/rc.error
fi

if adc start
then
    echo "adc started OK"
else
    sh /etc/init.d/rc.error
fi

if [ $BOARD == FMUv1 ]
then
    echo "Starting FMUv1 sensors"
    if hmc5883 start
    then
        echo "hmc5883 started OK"
    else
        sh /etc/init.d/rc.error
    fi
    if mpu6000 start
    then
       echo "mpu6000  started OK"
    else
       sh /etc/init.d/rc.error
    fi
    if l3gd20 start
    then
       echo "l3gd20 started OK"
    else
       echo "No l3gd20"
       echo "No l3gd20" >> $logfile
    fi
else
    echo "Starting FMUv2 sensors"
    if hmc5883 start
    then
        echo "Using external magnetometer"
    fi
    if mpu6000 start
    then
       echo "Found MPU6000"
       echo "Found MPU6000" >> $logfile
    else
       echo "No MPU6000"
       echo "No MPU6000" >> $logfile
    fi
    if l3gd20 start
    then
       echo "l3gd20 started OK"
    else
       sh /etc/init.d/rc.error
    fi
    if lsm303d start
    then
       echo "lsm303d started OK"
    else
       sh /etc/init.d/rc.error
    fi
fi

# optional ETS airspeed sensor
if ets_airspeed start
then
    echo "Found ETS airspeed sensor" >> $logfile
fi

if meas_airspeed start
then
    echo "Found MEAS airspeed sensor" >> $logfile
fi

echo "Trying PX4IO board"
echo "Trying PX4IO board" >> $logfile

# rgbled
if rgbled start
then
   echo "rgbled started OK"
else
   echo "Failed to start rgbled driver" >> $logfile
fi

echo Starting ArduPilot
echo Starting ArduPilot $deviceA $deviceC $deviceD >> $logfile
if ArduPilot -d $deviceA -d2 $deviceC -d3 $deviceD start
then
    echo ArduPilot started OK
else
    sh /etc/init.d/rc.error
fi

echo "rc.APM finished"
echo "rc.APM finished" >> $logfile