mirror of https://github.com/ArduPilot/ardupilot
1492 lines
61 KiB
C++
1492 lines
61 KiB
C++
#include <AP_HAL/AP_HAL.h>
|
|
|
|
#include "AP_NavEKF3_core.h"
|
|
#include <GCS_MAVLink/GCS.h>
|
|
#include <AP_Logger/AP_Logger.h>
|
|
#include <AP_DAL/AP_DAL.h>
|
|
#include <AP_InternalError/AP_InternalError.h>
|
|
|
|
/********************************************************
|
|
* OPT FLOW AND RANGE FINDER *
|
|
********************************************************/
|
|
|
|
// Read the range finder and take new measurements if available
|
|
// Apply a median filter
|
|
void NavEKF3_core::readRangeFinder(void)
|
|
{
|
|
uint8_t midIndex;
|
|
uint8_t maxIndex;
|
|
uint8_t minIndex;
|
|
// get theoretical correct range when the vehicle is on the ground
|
|
// don't allow range to go below 5cm because this can cause problems with optical flow processing
|
|
const auto *_rng = dal.rangefinder();
|
|
if (_rng == nullptr) {
|
|
return;
|
|
}
|
|
rngOnGnd = MAX(_rng->ground_clearance_cm_orient(ROTATION_PITCH_270) * 0.01f, 0.05f);
|
|
|
|
// limit update rate to maximum allowed by data buffers
|
|
if ((imuSampleTime_ms - lastRngMeasTime_ms) > frontend->sensorIntervalMin_ms) {
|
|
|
|
// reset the timer used to control the measurement rate
|
|
lastRngMeasTime_ms = imuSampleTime_ms;
|
|
|
|
// store samples and sample time into a ring buffer if valid
|
|
// use data from two range finders if available
|
|
|
|
for (uint8_t sensorIndex = 0; sensorIndex < ARRAY_SIZE(rngMeasIndex); sensorIndex++) {
|
|
const auto *sensor = _rng->get_backend(sensorIndex);
|
|
if (sensor == nullptr) {
|
|
continue;
|
|
}
|
|
if ((sensor->orientation() == ROTATION_PITCH_270) && (sensor->status() == AP_DAL_RangeFinder::Status::Good)) {
|
|
rngMeasIndex[sensorIndex] ++;
|
|
if (rngMeasIndex[sensorIndex] > 2) {
|
|
rngMeasIndex[sensorIndex] = 0;
|
|
}
|
|
storedRngMeasTime_ms[sensorIndex][rngMeasIndex[sensorIndex]] = imuSampleTime_ms - 25;
|
|
storedRngMeas[sensorIndex][rngMeasIndex[sensorIndex]] = sensor->distance_cm() * 0.01f;
|
|
} else {
|
|
continue;
|
|
}
|
|
|
|
// check for three fresh samples
|
|
bool sampleFresh[DOWNWARD_RANGEFINDER_MAX_INSTANCES][3] = {};
|
|
for (uint8_t index = 0; index <= 2; index++) {
|
|
sampleFresh[sensorIndex][index] = (imuSampleTime_ms - storedRngMeasTime_ms[sensorIndex][index]) < 500;
|
|
}
|
|
|
|
// find the median value if we have three fresh samples
|
|
if (sampleFresh[sensorIndex][0] && sampleFresh[sensorIndex][1] && sampleFresh[sensorIndex][2]) {
|
|
if (storedRngMeas[sensorIndex][0] > storedRngMeas[sensorIndex][1]) {
|
|
minIndex = 1;
|
|
maxIndex = 0;
|
|
} else {
|
|
minIndex = 0;
|
|
maxIndex = 1;
|
|
}
|
|
if (storedRngMeas[sensorIndex][2] > storedRngMeas[sensorIndex][maxIndex]) {
|
|
midIndex = maxIndex;
|
|
} else if (storedRngMeas[sensorIndex][2] < storedRngMeas[sensorIndex][minIndex]) {
|
|
midIndex = minIndex;
|
|
} else {
|
|
midIndex = 2;
|
|
}
|
|
|
|
// don't allow time to go backwards
|
|
if (storedRngMeasTime_ms[sensorIndex][midIndex] > rangeDataNew.time_ms) {
|
|
rangeDataNew.time_ms = storedRngMeasTime_ms[sensorIndex][midIndex];
|
|
}
|
|
|
|
// limit the measured range to be no less than the on-ground range
|
|
rangeDataNew.rng = MAX(storedRngMeas[sensorIndex][midIndex],rngOnGnd);
|
|
|
|
// get position in body frame for the current sensor
|
|
rangeDataNew.sensor_idx = sensorIndex;
|
|
|
|
// write data to buffer with time stamp to be fused when the fusion time horizon catches up with it
|
|
storedRange.push(rangeDataNew);
|
|
|
|
// indicate we have updated the measurement
|
|
rngValidMeaTime_ms = imuSampleTime_ms;
|
|
|
|
} else if (onGround && ((imuSampleTime_ms - rngValidMeaTime_ms) > 200)) {
|
|
// before takeoff we assume on-ground range value if there is no data
|
|
rangeDataNew.time_ms = imuSampleTime_ms;
|
|
rangeDataNew.rng = rngOnGnd;
|
|
|
|
// write data to buffer with time stamp to be fused when the fusion time horizon catches up with it
|
|
storedRange.push(rangeDataNew);
|
|
|
|
// indicate we have updated the measurement
|
|
rngValidMeaTime_ms = imuSampleTime_ms;
|
|
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void NavEKF3_core::writeBodyFrameOdom(float quality, const Vector3f &delPos, const Vector3f &delAng, float delTime, uint32_t timeStamp_ms, uint16_t delay_ms, const Vector3f &posOffset)
|
|
{
|
|
#if EK3_FEATURE_BODY_ODOM
|
|
// protect against NaN
|
|
if (isnan(quality) || delPos.is_nan() || delAng.is_nan() || isnan(delTime) || posOffset.is_nan()) {
|
|
return;
|
|
}
|
|
|
|
// limit update rate to maximum allowed by sensor buffers and fusion process
|
|
// don't try to write to buffer until the filter has been initialised
|
|
if (((timeStamp_ms - bodyOdmMeasTime_ms) < frontend->sensorIntervalMin_ms) || (delTime < dtEkfAvg) || !statesInitialised) {
|
|
return;
|
|
}
|
|
|
|
// subtract delay from timestamp
|
|
timeStamp_ms -= delay_ms;
|
|
|
|
bodyOdmDataNew.body_offset = posOffset.toftype();
|
|
bodyOdmDataNew.vel = delPos.toftype() * (1.0/delTime);
|
|
bodyOdmDataNew.time_ms = timeStamp_ms;
|
|
bodyOdmDataNew.angRate = (delAng * (1.0/delTime)).toftype();
|
|
bodyOdmMeasTime_ms = timeStamp_ms;
|
|
|
|
// simple model of accuracy
|
|
// TODO move this calculation outside of EKF into the sensor driver
|
|
bodyOdmDataNew.velErr = frontend->_visOdmVelErrMin + (frontend->_visOdmVelErrMax - frontend->_visOdmVelErrMin) * (1.0f - 0.01f * quality);
|
|
|
|
storedBodyOdm.push(bodyOdmDataNew);
|
|
#endif // EK3_FEATURE_BODY_ODOM
|
|
}
|
|
|
|
void NavEKF3_core::writeWheelOdom(float delAng, float delTime, uint32_t timeStamp_ms, const Vector3f &posOffset, float radius)
|
|
{
|
|
#if EK3_FEATURE_BODY_ODOM
|
|
// This is a simple hack to get wheel encoder data into the EKF and verify the interface sign conventions and units
|
|
// It uses the exisiting body frame velocity fusion.
|
|
// TODO implement a dedicated wheel odometry observation model
|
|
|
|
// rate limiting to 50hz should be done by the caller
|
|
// limit update rate to maximum allowed by sensor buffers and fusion process
|
|
// don't try to write to buffer until the filter has been initialised
|
|
if ((delTime < dtEkfAvg) || !statesInitialised) {
|
|
return;
|
|
}
|
|
|
|
wheel_odm_elements wheelOdmDataNew = {};
|
|
wheelOdmDataNew.hub_offset = posOffset.toftype();
|
|
wheelOdmDataNew.delAng = delAng;
|
|
wheelOdmDataNew.radius = radius;
|
|
wheelOdmDataNew.delTime = delTime;
|
|
|
|
// because we are currently converting to an equivalent velocity measurement before fusing
|
|
// the measurement time is moved back to the middle of the sampling period
|
|
wheelOdmDataNew.time_ms = timeStamp_ms - (uint32_t)(500.0f * delTime);
|
|
|
|
storedWheelOdm.push(wheelOdmDataNew);
|
|
#endif // EK3_FEATURE_BODY_ODOM
|
|
}
|
|
|
|
// write the raw optical flow measurements
|
|
// this needs to be called externally.
|
|
void NavEKF3_core::writeOptFlowMeas(const uint8_t rawFlowQuality, const Vector2f &rawFlowRates, const Vector2f &rawGyroRates, const uint32_t msecFlowMeas, const Vector3f &posOffset, float heightOverride)
|
|
{
|
|
// limit update rate to maximum allowed by sensor buffers
|
|
if ((imuSampleTime_ms - flowMeaTime_ms) < frontend->sensorIntervalMin_ms) {
|
|
return;
|
|
}
|
|
|
|
// The raw measurements need to be optical flow rates in radians/second averaged across the time since the last update
|
|
// The PX4Flow sensor outputs flow rates with the following axis and sign conventions:
|
|
// A positive X rate is produced by a positive sensor rotation about the X axis
|
|
// A positive Y rate is produced by a positive sensor rotation about the Y axis
|
|
// This filter uses a different definition of optical flow rates to the sensor with a positive optical flow rate produced by a
|
|
// negative rotation about that axis. For example a positive rotation of the flight vehicle about its X (roll) axis would produce a negative X flow rate
|
|
flowMeaTime_ms = imuSampleTime_ms;
|
|
// calculate bias errors on flow sensor gyro rates, but protect against spikes in data
|
|
// reset the accumulated body delta angle and time
|
|
// don't do the calculation if not enough time lapsed for a reliable body rate measurement
|
|
if (delTimeOF > 0.01f) {
|
|
flowGyroBias.x = 0.99f * flowGyroBias.x + 0.01f * constrain_ftype((rawGyroRates.x - delAngBodyOF.x/delTimeOF),-0.1f,0.1f);
|
|
flowGyroBias.y = 0.99f * flowGyroBias.y + 0.01f * constrain_ftype((rawGyroRates.y - delAngBodyOF.y/delTimeOF),-0.1f,0.1f);
|
|
delAngBodyOF.zero();
|
|
delTimeOF = 0.0f;
|
|
}
|
|
// by definition if this function is called, then flow measurements have been provided so we
|
|
// need to run the optical flow takeoff detection
|
|
detectOptFlowTakeoff();
|
|
|
|
// don't use data with a low quality indicator or extreme rates (helps catch corrupt sensor data)
|
|
if ((rawFlowQuality > 0) && rawFlowRates.length() < 4.2f && rawGyroRates.length() < 4.2f) {
|
|
// correct flow sensor body rates for bias and write
|
|
of_elements ofDataNew {};
|
|
ofDataNew.bodyRadXYZ.x = rawGyroRates.x - flowGyroBias.x;
|
|
ofDataNew.bodyRadXYZ.y = rawGyroRates.y - flowGyroBias.y;
|
|
// the sensor interface doesn't provide a z axis rate so use the rate from the nav sensor instead
|
|
if (delTimeOF > 0.001f) {
|
|
// first preference is to use the rate averaged over the same sampling period as the flow sensor
|
|
ofDataNew.bodyRadXYZ.z = delAngBodyOF.z / delTimeOF;
|
|
} else if (imuDataNew.delAngDT > 0.001f){
|
|
// second preference is to use most recent IMU data
|
|
ofDataNew.bodyRadXYZ.z = imuDataNew.delAng.z / imuDataNew.delAngDT;
|
|
} else {
|
|
// third preference is use zero
|
|
ofDataNew.bodyRadXYZ.z = 0.0f;
|
|
}
|
|
// write uncorrected flow rate measurements
|
|
// note correction for different axis and sign conventions used by the px4flow sensor
|
|
ofDataNew.flowRadXY = - rawFlowRates.toftype(); // raw (non motion compensated) optical flow angular rate about the X axis (rad/sec)
|
|
// write the flow sensor position in body frame
|
|
ofDataNew.body_offset = posOffset.toftype();
|
|
// write the flow sensor height override
|
|
ofDataNew.heightOverride = heightOverride;
|
|
// write flow rate measurements corrected for body rates
|
|
ofDataNew.flowRadXYcomp.x = ofDataNew.flowRadXY.x + ofDataNew.bodyRadXYZ.x;
|
|
ofDataNew.flowRadXYcomp.y = ofDataNew.flowRadXY.y + ofDataNew.bodyRadXYZ.y;
|
|
// record time last observation was received so we can detect loss of data elsewhere
|
|
flowValidMeaTime_ms = imuSampleTime_ms;
|
|
// estimate sample time of the measurement
|
|
ofDataNew.time_ms = imuSampleTime_ms - frontend->_flowDelay_ms - frontend->flowTimeDeltaAvg_ms/2;
|
|
// Correct for the average intersampling delay due to the filter updaterate
|
|
ofDataNew.time_ms -= localFilterTimeStep_ms/2;
|
|
// Prevent time delay exceeding age of oldest IMU data in the buffer
|
|
ofDataNew.time_ms = MAX(ofDataNew.time_ms,imuDataDelayed.time_ms);
|
|
// Save data to buffer
|
|
storedOF.push(ofDataNew);
|
|
}
|
|
}
|
|
|
|
|
|
/********************************************************
|
|
* MAGNETOMETER *
|
|
********************************************************/
|
|
|
|
// try changing compass, return true if a new compass is found
|
|
void NavEKF3_core::tryChangeCompass(void)
|
|
{
|
|
const auto &compass = dal.compass();
|
|
const uint8_t maxCount = compass.get_count();
|
|
|
|
// search through the list of magnetometers
|
|
for (uint8_t i=1; i<maxCount; i++) {
|
|
uint8_t tempIndex = magSelectIndex + i;
|
|
// loop back to the start index if we have exceeded the bounds
|
|
if (tempIndex >= maxCount) {
|
|
tempIndex -= maxCount;
|
|
}
|
|
// if the magnetometer is allowed to be used for yaw and has a different index, we start using it
|
|
if (compass.healthy(tempIndex) && compass.use_for_yaw(tempIndex) && tempIndex != magSelectIndex) {
|
|
magSelectIndex = tempIndex;
|
|
GCS_SEND_TEXT(MAV_SEVERITY_INFO, "EKF3 IMU%u switching to compass %u",(unsigned)imu_index,magSelectIndex);
|
|
// reset the timeout flag and timer
|
|
magTimeout = false;
|
|
lastHealthyMagTime_ms = imuSampleTime_ms;
|
|
// zero the learned magnetometer bias states
|
|
stateStruct.body_magfield.zero();
|
|
// clear the measurement buffer
|
|
storedMag.reset();
|
|
// clear the data waiting flag so that we do not use any data pending from the previous sensor
|
|
magDataToFuse = false;
|
|
// request a reset of the magnetic field states
|
|
magStateResetRequest = true;
|
|
// declare the field unlearned so that the reset request will be obeyed
|
|
magFieldLearned = false;
|
|
// reset body mag variances on next CovariancePrediction
|
|
needMagBodyVarReset = true;
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
// check for new magnetometer data and update store measurements if available
|
|
void NavEKF3_core::readMagData()
|
|
{
|
|
const auto &compass = dal.compass();
|
|
|
|
if (!compass.available()) {
|
|
allMagSensorsFailed = true;
|
|
return;
|
|
}
|
|
|
|
// If we are a vehicle with a sideslip constraint to aid yaw estimation and we have timed out on our last avialable
|
|
// magnetometer, then declare the magnetometers as failed for this flight
|
|
const uint8_t maxCount = compass.get_count();
|
|
if (allMagSensorsFailed || (magTimeout && assume_zero_sideslip() && magSelectIndex >= maxCount-1 && inFlight)) {
|
|
allMagSensorsFailed = true;
|
|
return;
|
|
}
|
|
|
|
if (compass.learn_offsets_enabled()) {
|
|
wasLearningCompass_ms = imuSampleTime_ms;
|
|
} else if (wasLearningCompass_ms != 0 && imuSampleTime_ms - wasLearningCompass_ms > 1000) {
|
|
// allow time for old data to clear the buffer before signalling other code that compass data can be used
|
|
wasLearningCompass_ms = 0;
|
|
}
|
|
|
|
// If the magnetometer has timed out (been rejected for too long), we find another magnetometer to use if available
|
|
// Don't do this if we are on the ground because there can be magnetic interference and we need to know if there is a problem
|
|
// before taking off. Don't do this within the first 30 seconds from startup because the yaw error could be due to large yaw gyro bias affsets
|
|
// if the timeout is due to a sensor failure, then declare a timeout regardless of onground status
|
|
if (maxCount > 1) {
|
|
bool fusionTimeout = magTimeout && !onGround && imuSampleTime_ms - ekfStartTime_ms > 30000 && !(frontend->_affinity & EKF_AFFINITY_MAG);
|
|
bool sensorTimeout = !compass.healthy(magSelectIndex) && imuSampleTime_ms - lastMagRead_ms > frontend->magFailTimeLimit_ms;
|
|
if (fusionTimeout || sensorTimeout) {
|
|
tryChangeCompass();
|
|
}
|
|
}
|
|
|
|
// limit compass update rate to prevent high processor loading because magnetometer fusion is an expensive step and we could overflow the FIFO buffer
|
|
if (use_compass() &&
|
|
compass.healthy(magSelectIndex) &&
|
|
((compass.last_update_usec(magSelectIndex) - lastMagUpdate_us) > 1000 * frontend->sensorIntervalMin_ms)) {
|
|
|
|
// detect changes to magnetometer offset parameters and reset states
|
|
Vector3F nowMagOffsets = compass.get_offsets(magSelectIndex).toftype();
|
|
bool changeDetected = lastMagOffsetsValid && (nowMagOffsets != lastMagOffsets);
|
|
if (changeDetected) {
|
|
// zero the learned magnetometer bias states
|
|
stateStruct.body_magfield.zero();
|
|
// clear the measurement buffer
|
|
storedMag.reset();
|
|
|
|
// reset body mag variances on next
|
|
// CovariancePrediction. This copes with possible errors
|
|
// in the new offsets
|
|
needMagBodyVarReset = true;
|
|
}
|
|
lastMagOffsets = nowMagOffsets;
|
|
lastMagOffsetsValid = true;
|
|
|
|
// store time of last measurement update
|
|
lastMagUpdate_us = compass.last_update_usec(magSelectIndex);
|
|
|
|
// Magnetometer data at the current time horizon
|
|
mag_elements magDataNew;
|
|
|
|
// estimate of time magnetometer measurement was taken, allowing for delays
|
|
magDataNew.time_ms = imuSampleTime_ms - frontend->magDelay_ms;
|
|
|
|
// Correct for the average intersampling delay due to the filter updaterate
|
|
magDataNew.time_ms -= localFilterTimeStep_ms/2;
|
|
|
|
// read compass data and scale to improve numerical conditioning
|
|
magDataNew.mag = (compass.get_field(magSelectIndex) * 0.001f).toftype();
|
|
|
|
// check for consistent data between magnetometers
|
|
consistentMagData = compass.consistent();
|
|
|
|
// save magnetometer measurement to buffer to be fused later
|
|
storedMag.push(magDataNew);
|
|
|
|
// remember time we read compass, to detect compass sensor failure
|
|
lastMagRead_ms = imuSampleTime_ms;
|
|
}
|
|
}
|
|
|
|
/********************************************************
|
|
* Inertial Measurements *
|
|
********************************************************/
|
|
|
|
/*
|
|
* Read IMU delta angle and delta velocity measurements and downsample to 100Hz
|
|
* for storage in the data buffers used by the EKF. If the IMU data arrives at
|
|
* lower rate than 100Hz, then no downsampling or upsampling will be performed.
|
|
* Downsampling is done using a method that does not introduce coning or sculling
|
|
* errors.
|
|
*/
|
|
void NavEKF3_core::readIMUData()
|
|
{
|
|
const auto &ins = dal.ins();
|
|
|
|
// calculate an averaged IMU update rate using a spike and lowpass filter combination
|
|
dtIMUavg = 0.02f * constrain_ftype(ins.get_loop_delta_t(),0.5f * dtIMUavg, 2.0f * dtIMUavg) + 0.98f * dtIMUavg;
|
|
|
|
// the imu sample time is used as a common time reference throughout the filter
|
|
imuSampleTime_ms = frontend->imuSampleTime_us / 1000;
|
|
|
|
uint8_t accel_active, gyro_active;
|
|
|
|
if (ins.use_accel(imu_index)) {
|
|
accel_active = imu_index;
|
|
} else {
|
|
accel_active = ins.get_primary_accel();
|
|
}
|
|
|
|
if (ins.use_gyro(imu_index)) {
|
|
gyro_active = imu_index;
|
|
} else {
|
|
gyro_active = ins.get_primary_gyro();
|
|
}
|
|
|
|
if (gyro_active != gyro_index_active) {
|
|
// we are switching active gyro at runtime. Copy over the
|
|
// bias we have learned from the previously inactive
|
|
// gyro. We don't re-init the bias uncertainty as it should
|
|
// have the same uncertainty as the previously active gyro
|
|
stateStruct.gyro_bias = inactiveBias[gyro_active].gyro_bias;
|
|
gyro_index_active = gyro_active;
|
|
}
|
|
|
|
if (accel_active != accel_index_active) {
|
|
// switch to the learned accel bias for this IMU
|
|
stateStruct.accel_bias = inactiveBias[accel_active].accel_bias;
|
|
accel_index_active = accel_active;
|
|
}
|
|
|
|
// update the inactive bias states
|
|
learnInactiveBiases();
|
|
|
|
// run movement check using IMU data
|
|
updateMovementCheck();
|
|
|
|
readDeltaVelocity(accel_index_active, imuDataNew.delVel, imuDataNew.delVelDT);
|
|
accelPosOffset = ins.get_imu_pos_offset(accel_index_active).toftype();
|
|
imuDataNew.accel_index = accel_index_active;
|
|
|
|
// Get delta angle data from primary gyro or primary if not available
|
|
readDeltaAngle(gyro_index_active, imuDataNew.delAng, imuDataNew.delAngDT);
|
|
imuDataNew.delAngDT = MAX(imuDataNew.delAngDT, 1.0e-4f);
|
|
imuDataNew.gyro_index = gyro_index_active;
|
|
|
|
// Get current time stamp
|
|
imuDataNew.time_ms = imuSampleTime_ms;
|
|
|
|
// Accumulate the measurement time interval for the delta velocity and angle data
|
|
imuDataDownSampledNew.delAngDT += imuDataNew.delAngDT;
|
|
imuDataDownSampledNew.delVelDT += imuDataNew.delVelDT;
|
|
|
|
// use the most recent IMU index for the downsampled IMU
|
|
// data. This isn't strictly correct if we switch IMUs between
|
|
// samples
|
|
imuDataDownSampledNew.gyro_index = imuDataNew.gyro_index;
|
|
imuDataDownSampledNew.accel_index = imuDataNew.accel_index;
|
|
|
|
// Rotate quaternon atitude from previous to new and normalise.
|
|
// Accumulation using quaternions prevents introduction of coning errors due to downsampling
|
|
imuQuatDownSampleNew.rotate(imuDataNew.delAng);
|
|
imuQuatDownSampleNew.normalize();
|
|
|
|
// Rotate the latest delta velocity into body frame at the start of accumulation
|
|
Matrix3F deltaRotMat;
|
|
imuQuatDownSampleNew.rotation_matrix(deltaRotMat);
|
|
|
|
// Apply the delta velocity to the delta velocity accumulator
|
|
imuDataDownSampledNew.delVel += deltaRotMat*imuDataNew.delVel;
|
|
|
|
// Keep track of the number of IMU frames since the last state prediction
|
|
framesSincePredict++;
|
|
|
|
/*
|
|
* If the target EKF time step has been accumulated, and the frontend has allowed start of a new predict cycle,
|
|
* then store the accumulated IMU data to be used by the state prediction, ignoring the frontend permission if more
|
|
* than twice the target time has lapsed. Adjust the target EKF step time threshold to allow for timing jitter in the
|
|
* IMU data.
|
|
*/
|
|
if ((imuDataDownSampledNew.delAngDT >= (EKF_TARGET_DT-(dtIMUavg*0.5f)) && startPredictEnabled) ||
|
|
(imuDataDownSampledNew.delAngDT >= 2.0f*EKF_TARGET_DT)) {
|
|
|
|
// convert the accumulated quaternion to an equivalent delta angle
|
|
imuQuatDownSampleNew.to_axis_angle(imuDataDownSampledNew.delAng);
|
|
|
|
// Time stamp the data
|
|
imuDataDownSampledNew.time_ms = imuSampleTime_ms;
|
|
|
|
// Write data to the FIFO IMU buffer
|
|
storedIMU.push_youngest_element(imuDataDownSampledNew);
|
|
|
|
// calculate the achieved average time step rate for the EKF using a combination spike and LPF
|
|
ftype dtNow = constrain_ftype(0.5f*(imuDataDownSampledNew.delAngDT+imuDataDownSampledNew.delVelDT),0.5f * dtEkfAvg, 2.0f * dtEkfAvg);
|
|
dtEkfAvg = 0.98f * dtEkfAvg + 0.02f * dtNow;
|
|
|
|
// do an addtional down sampling for data used to sample XY body frame drag specific forces
|
|
SampleDragData(imuDataDownSampledNew);
|
|
|
|
// zero the accumulated IMU data and quaternion
|
|
imuDataDownSampledNew.delAng.zero();
|
|
imuDataDownSampledNew.delVel.zero();
|
|
imuDataDownSampledNew.delAngDT = 0.0f;
|
|
imuDataDownSampledNew.delVelDT = 0.0f;
|
|
imuQuatDownSampleNew[0] = 1.0f;
|
|
imuQuatDownSampleNew[3] = imuQuatDownSampleNew[2] = imuQuatDownSampleNew[1] = 0.0f;
|
|
|
|
// reset the counter used to let the frontend know how many frames have elapsed since we started a new update cycle
|
|
framesSincePredict = 0;
|
|
|
|
// set the flag to let the filter know it has new IMU data and needs to run
|
|
runUpdates = true;
|
|
|
|
// extract the oldest available data from the FIFO buffer
|
|
imuDataDelayed = storedIMU.get_oldest_element();
|
|
|
|
// protect against delta time going to zero
|
|
ftype minDT = 0.1f * dtEkfAvg;
|
|
imuDataDelayed.delAngDT = MAX(imuDataDelayed.delAngDT,minDT);
|
|
imuDataDelayed.delVelDT = MAX(imuDataDelayed.delVelDT,minDT);
|
|
|
|
updateTimingStatistics();
|
|
|
|
// correct the extracted IMU data for sensor errors
|
|
delAngCorrected = imuDataDelayed.delAng;
|
|
delVelCorrected = imuDataDelayed.delVel;
|
|
correctDeltaAngle(delAngCorrected, imuDataDelayed.delAngDT, imuDataDelayed.gyro_index);
|
|
correctDeltaVelocity(delVelCorrected, imuDataDelayed.delVelDT, imuDataDelayed.accel_index);
|
|
|
|
} else {
|
|
// we don't have new IMU data in the buffer so don't run filter updates on this time step
|
|
runUpdates = false;
|
|
}
|
|
}
|
|
|
|
// read the delta velocity and corresponding time interval from the IMU
|
|
// return false if data is not available
|
|
bool NavEKF3_core::readDeltaVelocity(uint8_t ins_index, Vector3F &dVel, ftype &dVel_dt) {
|
|
const auto &ins = dal.ins();
|
|
|
|
if (ins_index < ins.get_accel_count()) {
|
|
Vector3f dVelF;
|
|
float dVel_dtF;
|
|
ins.get_delta_velocity(ins_index, dVelF, dVel_dtF);
|
|
dVel = dVelF.toftype();
|
|
dVel_dt = dVel_dtF;
|
|
dVel_dt = MAX(dVel_dt,1.0e-4);
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
/********************************************************
|
|
* Global Position Measurement *
|
|
********************************************************/
|
|
|
|
// check for new valid GPS data and update stored measurement if available
|
|
void NavEKF3_core::readGpsData()
|
|
{
|
|
// check for new GPS data
|
|
const auto &gps = dal.gps();
|
|
|
|
if (gps.status(selected_gps) < AP_DAL_GPS::GPS_OK_FIX_3D) {
|
|
// The GPS has dropped lock so force quality checks to restart
|
|
gpsGoodToAlign = false;
|
|
lastGpsVelFail_ms = imuSampleTime_ms;
|
|
lastGpsVelPass_ms = 0;
|
|
if (filterStatus.flags.horiz_pos_rel && !filterStatus.flags.horiz_pos_abs) {
|
|
// If we can do dead reckoning with a data source other than GPS there is time to wait
|
|
// for GPS alignment checks to pass before using GPS inside the EKF.
|
|
waitingForGpsChecks = true;
|
|
} else {
|
|
waitingForGpsChecks = false;
|
|
}
|
|
}
|
|
|
|
// limit update rate to avoid overflowing the FIFO buffer
|
|
if (gps.last_message_time_ms(selected_gps) - lastTimeGpsReceived_ms <= frontend->sensorIntervalMin_ms) {
|
|
return;
|
|
}
|
|
|
|
if (gps.status(selected_gps) < AP_DAL_GPS::GPS_OK_FIX_3D) {
|
|
// report GPS fix status
|
|
gpsCheckStatus.bad_fix = true;
|
|
dal.snprintf(prearm_fail_string, sizeof(prearm_fail_string), "Waiting for 3D fix");
|
|
return;
|
|
}
|
|
|
|
// report GPS fix status
|
|
gpsCheckStatus.bad_fix = false;
|
|
|
|
// store fix time from previous read
|
|
const uint32_t secondLastGpsTime_ms = lastTimeGpsReceived_ms;
|
|
|
|
// get current fix time
|
|
lastTimeGpsReceived_ms = gps.last_message_time_ms(selected_gps);
|
|
|
|
// estimate when the GPS fix was valid, allowing for GPS processing and other delays
|
|
// ideally we should be using a timing signal from the GPS receiver to set this time
|
|
// Use the driver specified delay
|
|
float gps_delay_sec = 0;
|
|
gps.get_lag(selected_gps, gps_delay_sec);
|
|
gpsDataNew.time_ms = lastTimeGpsReceived_ms - (uint32_t)(gps_delay_sec * 1000.0f);
|
|
|
|
// Correct for the average intersampling delay due to the filter updaterate
|
|
gpsDataNew.time_ms -= localFilterTimeStep_ms/2;
|
|
|
|
// Prevent the time stamp falling outside the oldest and newest IMU data in the buffer
|
|
gpsDataNew.time_ms = MIN(MAX(gpsDataNew.time_ms,imuDataDelayed.time_ms),imuDataDownSampledNew.time_ms);
|
|
|
|
// Get which GPS we are using for position information
|
|
gpsDataNew.sensor_idx = selected_gps;
|
|
|
|
// read the NED velocity from the GPS
|
|
gpsDataNew.vel = gps.velocity(selected_gps).toftype();
|
|
gpsDataNew.have_vz = gps.have_vertical_velocity(selected_gps);
|
|
|
|
// position and velocity are not yet corrected for sensor position
|
|
gpsDataNew.corrected = false;
|
|
|
|
// Use the speed and position accuracy from the GPS if available, otherwise set it to zero.
|
|
// Apply a decaying envelope filter with a 5 second time constant to the raw accuracy data
|
|
ftype alpha = constrain_ftype(0.0002f * (lastTimeGpsReceived_ms - secondLastGpsTime_ms),0.0f,1.0f);
|
|
gpsSpdAccuracy *= (1.0f - alpha);
|
|
float gpsSpdAccRaw;
|
|
if (!gps.speed_accuracy(selected_gps, gpsSpdAccRaw)) {
|
|
gpsSpdAccuracy = 0.0f;
|
|
} else {
|
|
gpsSpdAccuracy = MAX(gpsSpdAccuracy,gpsSpdAccRaw);
|
|
gpsSpdAccuracy = MIN(gpsSpdAccuracy,50.0f);
|
|
gpsSpdAccuracy = MAX(gpsSpdAccuracy,frontend->_gpsHorizVelNoise);
|
|
}
|
|
gpsPosAccuracy *= (1.0f - alpha);
|
|
float gpsPosAccRaw;
|
|
if (!gps.horizontal_accuracy(selected_gps, gpsPosAccRaw)) {
|
|
gpsPosAccuracy = 0.0f;
|
|
} else {
|
|
gpsPosAccuracy = MAX(gpsPosAccuracy,gpsPosAccRaw);
|
|
gpsPosAccuracy = MIN(gpsPosAccuracy,100.0f);
|
|
gpsPosAccuracy = MAX(gpsPosAccuracy, frontend->_gpsHorizPosNoise);
|
|
}
|
|
gpsHgtAccuracy *= (1.0f - alpha);
|
|
float gpsHgtAccRaw;
|
|
if (!gps.vertical_accuracy(selected_gps, gpsHgtAccRaw)) {
|
|
gpsHgtAccuracy = 0.0f;
|
|
} else {
|
|
gpsHgtAccuracy = MAX(gpsHgtAccuracy,gpsHgtAccRaw);
|
|
gpsHgtAccuracy = MIN(gpsHgtAccuracy,100.0f);
|
|
gpsHgtAccuracy = MAX(gpsHgtAccuracy, 1.5f * frontend->_gpsHorizPosNoise);
|
|
}
|
|
|
|
// check if we have enough GPS satellites and increase the gps noise scaler if we don't
|
|
if (gps.num_sats(selected_gps) >= 6 && (PV_AidingMode == AID_ABSOLUTE)) {
|
|
gpsNoiseScaler = 1.0f;
|
|
} else if (gps.num_sats(selected_gps) == 5 && (PV_AidingMode == AID_ABSOLUTE)) {
|
|
gpsNoiseScaler = 1.4f;
|
|
} else { // <= 4 satellites or in constant position mode
|
|
gpsNoiseScaler = 2.0f;
|
|
}
|
|
|
|
// Check if GPS can output vertical velocity, vertical velocity use is permitted and set GPS fusion mode accordingly
|
|
if (gpsDataNew.have_vz && frontend->sources.useVelZSource(AP_NavEKF_Source::SourceZ::GPS)) {
|
|
useGpsVertVel = true;
|
|
} else {
|
|
useGpsVertVel = false;
|
|
}
|
|
|
|
// Monitor quality of the GPS velocity data before and after alignment
|
|
calcGpsGoodToAlign();
|
|
|
|
// Post-alignment checks
|
|
calcGpsGoodForFlight();
|
|
|
|
// Read the GPS location in WGS-84 lat,long,height coordinates
|
|
const Location &gpsloc = gps.location(selected_gps);
|
|
|
|
// Set the EKF origin and magnetic field declination if not previously set and GPS checks have passed
|
|
if (gpsGoodToAlign && !validOrigin) {
|
|
Location gpsloc_fieldelevation = gpsloc;
|
|
// if flying, correct for height change from takeoff so that the origin is at field elevation
|
|
if (inFlight) {
|
|
gpsloc_fieldelevation.alt += (int32_t)(100.0f * stateStruct.position.z);
|
|
}
|
|
|
|
if (!setOrigin(gpsloc_fieldelevation)) {
|
|
// set an error as an attempt was made to set the origin more than once
|
|
INTERNAL_ERROR(AP_InternalError::error_t::flow_of_control);
|
|
return;
|
|
}
|
|
|
|
// set the NE earth magnetic field states using the published declination
|
|
// and set the corresponding variances and covariances
|
|
alignMagStateDeclination();
|
|
|
|
// Set the height of the NED origin
|
|
ekfGpsRefHgt = (double)0.01 * (double)gpsloc.alt + (double)outputDataNew.position.z;
|
|
|
|
// Set the uncertainty of the GPS origin height
|
|
ekfOriginHgtVar = sq(gpsHgtAccuracy);
|
|
|
|
}
|
|
|
|
if (gpsGoodToAlign && !have_table_earth_field) {
|
|
const auto &compass = dal.compass();
|
|
if (compass.have_scale_factor(magSelectIndex) &&
|
|
compass.auto_declination_enabled()) {
|
|
getEarthFieldTable(gpsloc);
|
|
if (frontend->_mag_ef_limit > 0) {
|
|
// initialise earth field from tables
|
|
stateStruct.earth_magfield = table_earth_field_ga;
|
|
}
|
|
}
|
|
}
|
|
|
|
// convert GPS measurements to local NED and save to buffer to be fused later if we have a valid origin
|
|
if (validOrigin) {
|
|
gpsDataNew.lat = gpsloc.lat;
|
|
gpsDataNew.lng = gpsloc.lng;
|
|
if ((frontend->_originHgtMode & (1<<2)) == 0) {
|
|
// the height adjustment to match GPS is being achieved by adjusting the origin height
|
|
gpsDataNew.hgt = (ftype)((double)0.01 * (double)gpsloc.alt - ekfGpsRefHgt);
|
|
} else {
|
|
// the height adjustment to match GPS is being achieved by adjusting the measurements
|
|
gpsDataNew.hgt = 0.01 * (gpsloc.alt - EKF_origin.alt);
|
|
}
|
|
storedGPS.push(gpsDataNew);
|
|
// declare GPS in use
|
|
gpsIsInUse = true;
|
|
}
|
|
}
|
|
|
|
// check for new valid GPS yaw data
|
|
void NavEKF3_core::readGpsYawData()
|
|
{
|
|
const auto &gps = dal.gps();
|
|
|
|
// if the GPS has yaw data then fuse it as an Euler yaw angle
|
|
float yaw_deg, yaw_accuracy_deg;
|
|
uint32_t yaw_time_ms;
|
|
if (gps.status(selected_gps) >= AP_DAL_GPS::GPS_OK_FIX_3D &&
|
|
dal.gps().gps_yaw_deg(selected_gps, yaw_deg, yaw_accuracy_deg, yaw_time_ms) &&
|
|
yaw_time_ms != yawMeasTime_ms) {
|
|
// GPS modules are rather too optimistic about their
|
|
// accuracy. Set to min of 5 degrees here to prevent
|
|
// the user constantly receiving warnings about high
|
|
// normalised yaw innovations
|
|
const ftype min_yaw_accuracy_deg = 5.0f;
|
|
yaw_accuracy_deg = MAX(yaw_accuracy_deg, min_yaw_accuracy_deg);
|
|
writeEulerYawAngle(radians(yaw_deg), radians(yaw_accuracy_deg), yaw_time_ms, 2);
|
|
}
|
|
}
|
|
|
|
// read the delta angle and corresponding time interval from the IMU
|
|
// return false if data is not available
|
|
bool NavEKF3_core::readDeltaAngle(uint8_t ins_index, Vector3F &dAng, ftype &dAngDT) {
|
|
const auto &ins = dal.ins();
|
|
|
|
if (ins_index < ins.get_gyro_count()) {
|
|
Vector3f dAngF;
|
|
float dAngDTF;
|
|
ins.get_delta_angle(ins_index, dAngF, dAngDTF);
|
|
dAng = dAngF.toftype();
|
|
dAngDT = dAngDTF;
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
|
|
/********************************************************
|
|
* Height Measurements *
|
|
********************************************************/
|
|
|
|
// check for new pressure altitude measurement data and update stored measurement if available
|
|
void NavEKF3_core::readBaroData()
|
|
{
|
|
// check to see if baro measurement has changed so we know if a new measurement has arrived
|
|
// limit update rate to avoid overflowing the FIFO buffer
|
|
const auto &baro = dal.baro();
|
|
if (baro.get_last_update(selected_baro) - lastBaroReceived_ms > frontend->sensorIntervalMin_ms) {
|
|
|
|
baroDataNew.hgt = baro.get_altitude(selected_baro);
|
|
|
|
// time stamp used to check for new measurement
|
|
lastBaroReceived_ms = baro.get_last_update(selected_baro);
|
|
|
|
// estimate of time height measurement was taken, allowing for delays
|
|
baroDataNew.time_ms = lastBaroReceived_ms - frontend->_hgtDelay_ms;
|
|
|
|
// Correct for the average intersampling delay due to the filter updaterate
|
|
baroDataNew.time_ms -= localFilterTimeStep_ms/2;
|
|
|
|
// Prevent time delay exceeding age of oldest IMU data in the buffer
|
|
baroDataNew.time_ms = MAX(baroDataNew.time_ms,imuDataDelayed.time_ms);
|
|
|
|
// save baro measurement to buffer to be fused later
|
|
storedBaro.push(baroDataNew);
|
|
}
|
|
}
|
|
|
|
// calculate filtered offset between baro height measurement and EKF height estimate
|
|
// offset should be subtracted from baro measurement to match filter estimate
|
|
// offset is used to enable reversion to baro from alternate height data source
|
|
void NavEKF3_core::calcFiltBaroOffset()
|
|
{
|
|
// Apply a first order LPF with spike protection
|
|
baroHgtOffset += 0.1f * constrain_ftype(baroDataDelayed.hgt + stateStruct.position.z - baroHgtOffset, -5.0f, 5.0f);
|
|
}
|
|
|
|
// correct the height of the EKF origin to be consistent with GPS Data using a Bayes filter.
|
|
void NavEKF3_core::correctEkfOriginHeight()
|
|
{
|
|
// Estimate the WGS-84 height of the EKF's origin using a Bayes filter
|
|
|
|
// calculate the variance of our a-priori estimate of the ekf origin height
|
|
ftype deltaTime = constrain_ftype(0.001f * (imuDataDelayed.time_ms - lastOriginHgtTime_ms), 0.0, 1.0);
|
|
if (activeHgtSource == AP_NavEKF_Source::SourceZ::BARO) {
|
|
// Use the baro drift rate
|
|
const ftype baroDriftRate = 0.05;
|
|
ekfOriginHgtVar += sq(baroDriftRate * deltaTime);
|
|
} else if (activeHgtSource == AP_NavEKF_Source::SourceZ::RANGEFINDER) {
|
|
// use the worse case expected terrain gradient and vehicle horizontal speed
|
|
const ftype maxTerrGrad = 0.25;
|
|
ekfOriginHgtVar += sq(maxTerrGrad * stateStruct.velocity.xy().length() * deltaTime);
|
|
} else {
|
|
// by definition our height source is absolute so cannot run this filter
|
|
return;
|
|
}
|
|
lastOriginHgtTime_ms = imuDataDelayed.time_ms;
|
|
|
|
// calculate the observation variance assuming EKF error relative to datum is independent of GPS observation error
|
|
// when not using GPS as height source
|
|
ftype originHgtObsVar = sq(gpsHgtAccuracy) + P[9][9];
|
|
|
|
// calculate the correction gain
|
|
ftype gain = ekfOriginHgtVar / (ekfOriginHgtVar + originHgtObsVar);
|
|
|
|
// calculate the innovation
|
|
ftype innovation = - stateStruct.position.z - gpsDataDelayed.hgt;
|
|
|
|
// check the innovation variance ratio
|
|
ftype ratio = sq(innovation) / (ekfOriginHgtVar + originHgtObsVar);
|
|
|
|
// correct the EKF origin and variance estimate if the innovation is less than 5-sigma
|
|
if (ratio < 25.0f && gpsAccuracyGood) {
|
|
ekfGpsRefHgt -= (double)(gain * innovation);
|
|
ekfOriginHgtVar -= MAX(gain * ekfOriginHgtVar , 0.0f);
|
|
}
|
|
}
|
|
|
|
/********************************************************
|
|
* Air Speed Measurements *
|
|
********************************************************/
|
|
|
|
// check for new airspeed data and update stored measurements if available
|
|
void NavEKF3_core::readAirSpdData()
|
|
{
|
|
const float EAS2TAS = dal.get_EAS2TAS();
|
|
// if airspeed reading is valid and is set by the user to be used and has been updated then
|
|
// we take a new reading, convert from EAS to TAS and set the flag letting other functions
|
|
// know a new measurement is available
|
|
|
|
const auto *airspeed = dal.airspeed();
|
|
if (airspeed &&
|
|
(airspeed->last_update_ms(selected_airspeed) - timeTasReceived_ms) > frontend->sensorIntervalMin_ms) {
|
|
tasDataNew.tas = airspeed->get_airspeed(selected_airspeed) * EAS2TAS;
|
|
timeTasReceived_ms = airspeed->last_update_ms(selected_airspeed);
|
|
tasDataNew.time_ms = timeTasReceived_ms - frontend->tasDelay_ms;
|
|
tasDataNew.tasVariance = sq(MAX(frontend->_easNoise * EAS2TAS, 0.5f));
|
|
tasDataNew.allowFusion = airspeed->healthy(selected_airspeed) && airspeed->use(selected_airspeed);
|
|
|
|
// Correct for the average intersampling delay due to the filter update rate
|
|
tasDataNew.time_ms -= localFilterTimeStep_ms/2;
|
|
|
|
// Save data into the buffer to be fused when the fusion time horizon catches up with it
|
|
storedTAS.push(tasDataNew);
|
|
}
|
|
|
|
// Check the buffer for measurements that have been overtaken by the fusion time horizon and need to be fused
|
|
tasDataToFuse = storedTAS.recall(tasDataDelayed,imuDataDelayed.time_ms);
|
|
|
|
float easErrVar = sq(MAX(frontend->_easNoise, 0.5f));
|
|
// Allow use of a default value if enabled
|
|
if (!useAirspeed() &&
|
|
imuDataDelayed.time_ms - tasDataDelayed.time_ms > 200 &&
|
|
is_positive(defaultAirSpeed)) {
|
|
tasDataDelayed.tas = defaultAirSpeed * EAS2TAS;
|
|
tasDataDelayed.tasVariance = sq(MAX(defaultAirSpeedVariance, easErrVar));
|
|
tasDataDelayed.allowFusion = true;
|
|
tasDataDelayed.time_ms = 0;
|
|
usingDefaultAirspeed = true;
|
|
} else {
|
|
usingDefaultAirspeed = false;
|
|
}
|
|
}
|
|
|
|
#if EK3_FEATURE_BEACON_FUSION
|
|
/********************************************************
|
|
* Range Beacon Measurements *
|
|
********************************************************/
|
|
|
|
// check for new range beacon data and push to data buffer if available
|
|
void NavEKF3_core::readRngBcnData()
|
|
{
|
|
// check that arrays are large enough
|
|
static_assert(ARRAY_SIZE(rngBcn.lastTime_ms) >= AP_BEACON_MAX_BEACONS, "lastTimeRngBcn_ms should have at least AP_BEACON_MAX_BEACONS elements");
|
|
|
|
// get the location of the beacon data
|
|
const AP_DAL_Beacon *beacon = dal.beacon();
|
|
|
|
// exit immediately if no beacon object
|
|
if (beacon == nullptr) {
|
|
return;
|
|
}
|
|
|
|
// get the number of beacons in use
|
|
rngBcn.N = MIN(beacon->count(), ARRAY_SIZE(rngBcn.lastTime_ms));
|
|
|
|
// search through all the beacons for new data and if we find it stop searching and push the data into the observation buffer
|
|
bool newDataPushed = false;
|
|
uint8_t numRngBcnsChecked = 0;
|
|
// start the search one index up from where we left it last time
|
|
uint8_t index = rngBcn.lastChecked;
|
|
while (!newDataPushed && (numRngBcnsChecked < rngBcn.N)) {
|
|
// track the number of beacons checked
|
|
numRngBcnsChecked++;
|
|
|
|
// move to next beacon, wrap index if necessary
|
|
index++;
|
|
if (index >= rngBcn.N) {
|
|
index = 0;
|
|
}
|
|
|
|
// check that the beacon is healthy and has new data
|
|
if (beacon->beacon_healthy(index) && beacon->beacon_last_update_ms(index) != rngBcn.lastTime_ms[index]) {
|
|
rng_bcn_elements rngBcnDataNew = {};
|
|
|
|
// set the timestamp, correcting for measurement delay and average intersampling delay due to the filter update rate
|
|
rngBcn.lastTime_ms[index] = beacon->beacon_last_update_ms(index);
|
|
rngBcnDataNew.time_ms = rngBcn.lastTime_ms[index] - frontend->_rngBcnDelay_ms - localFilterTimeStep_ms/2;
|
|
|
|
// set the range noise
|
|
// TODO the range library should provide the noise/accuracy estimate for each beacon
|
|
rngBcnDataNew.rngErr = frontend->_rngBcnNoise;
|
|
|
|
// set the range measurement
|
|
rngBcnDataNew.rng = beacon->beacon_distance(index);
|
|
|
|
// set the beacon position
|
|
rngBcnDataNew.beacon_posNED = beacon->beacon_position(index).toftype();
|
|
|
|
// identify the beacon identifier
|
|
rngBcnDataNew.beacon_ID = index;
|
|
|
|
// indicate we have new data to push to the buffer
|
|
newDataPushed = true;
|
|
|
|
// update the last checked index
|
|
rngBcn.lastChecked = index;
|
|
|
|
// Save data into the buffer to be fused when the fusion time horizon catches up with it
|
|
rngBcn.storedRange.push(rngBcnDataNew);
|
|
}
|
|
}
|
|
|
|
// Check if the beacon system has returned a 3D fix
|
|
Vector3f bp;
|
|
float bperr;
|
|
if (beacon->get_vehicle_position_ned(bp, bperr)) {
|
|
rngBcn.last3DmeasTime_ms = imuSampleTime_ms;
|
|
}
|
|
rngBcn.vehiclePosNED = bp.toftype();
|
|
rngBcn.vehiclePosErr = bperr;
|
|
|
|
// Check if the range beacon data can be used to align the vehicle position
|
|
if ((imuSampleTime_ms - rngBcn.last3DmeasTime_ms < 250) && (rngBcn.vehiclePosErr < 1.0f) && rngBcn.alignmentCompleted) {
|
|
// check for consistency between the position reported by the beacon and the position from the 3-State alignment filter
|
|
const ftype posDiffSq = sq(rngBcn.receiverPos.x - rngBcn.vehiclePosNED.x) + sq(rngBcn.receiverPos.y - rngBcn.vehiclePosNED.y);
|
|
const ftype posDiffVar = sq(rngBcn.vehiclePosErr) + rngBcn.receiverPosCov[0][0] + rngBcn.receiverPosCov[1][1];
|
|
if (posDiffSq < 9.0f * posDiffVar) {
|
|
rngBcn.goodToAlign = true;
|
|
// Set the EKF origin and magnetic field declination if not previously set
|
|
if (!validOrigin && (PV_AidingMode != AID_ABSOLUTE)) {
|
|
// get origin from beacon system
|
|
Location origin_loc;
|
|
if (beacon->get_origin(origin_loc)) {
|
|
setOriginLLH(origin_loc);
|
|
|
|
// set the NE earth magnetic field states using the published declination
|
|
// and set the corresponding variances and covariances
|
|
alignMagStateDeclination();
|
|
|
|
// Set the uncertainty of the origin height
|
|
ekfOriginHgtVar = sq(rngBcn.vehiclePosErr);
|
|
}
|
|
}
|
|
} else {
|
|
rngBcn.goodToAlign = false;
|
|
}
|
|
} else {
|
|
rngBcn.goodToAlign = false;
|
|
}
|
|
|
|
// Check the buffer for measurements that have been overtaken by the fusion time horizon and need to be fused
|
|
rngBcn.dataToFuse = rngBcn.storedRange.recall(rngBcn.dataDelayed, imuDataDelayed.time_ms);
|
|
|
|
// Correct the range beacon earth frame origin for estimated offset relative to the EKF earth frame origin
|
|
if (rngBcn.dataToFuse) {
|
|
rngBcn.dataDelayed.beacon_posNED.x += rngBcn.posOffsetNED.x;
|
|
rngBcn.dataDelayed.beacon_posNED.y += rngBcn.posOffsetNED.y;
|
|
}
|
|
|
|
}
|
|
#endif // EK3_FEATURE_BEACON_FUSION
|
|
|
|
/********************************************************
|
|
* Independant yaw sensor measurements *
|
|
********************************************************/
|
|
|
|
void NavEKF3_core::writeEulerYawAngle(float yawAngle, float yawAngleErr, uint32_t timeStamp_ms, uint8_t type)
|
|
{
|
|
// limit update rate to maximum allowed by sensor buffers and fusion process
|
|
// don't try to write to buffer until the filter has been initialised
|
|
if (((timeStamp_ms - yawMeasTime_ms) < frontend->sensorIntervalMin_ms) || !statesInitialised) {
|
|
return;
|
|
}
|
|
|
|
yawAngDataNew.yawAng = yawAngle;
|
|
yawAngDataNew.yawAngErr = yawAngleErr;
|
|
if (type == 2) {
|
|
yawAngDataNew.order = rotationOrder::TAIT_BRYAN_321;
|
|
} else if (type == 1) {
|
|
yawAngDataNew.order = rotationOrder::TAIT_BRYAN_312;
|
|
} else {
|
|
return;
|
|
}
|
|
yawAngDataNew.time_ms = timeStamp_ms;
|
|
|
|
storedYawAng.push(yawAngDataNew);
|
|
|
|
yawMeasTime_ms = timeStamp_ms;
|
|
}
|
|
|
|
// Writes the default equivalent airspeed and 1-sigma uncertainty in m/s to be used in forward flight if a measured airspeed is required and not available.
|
|
void NavEKF3_core::writeDefaultAirSpeed(float airspeed, float uncertainty)
|
|
{
|
|
defaultAirSpeed = airspeed;
|
|
defaultAirSpeedVariance = sq(uncertainty);
|
|
}
|
|
|
|
/********************************************************
|
|
* External Navigation Measurements *
|
|
********************************************************/
|
|
|
|
void NavEKF3_core::writeExtNavData(const Vector3f &pos, const Quaternion &quat, float posErr, float angErr, uint32_t timeStamp_ms, uint16_t delay_ms, uint32_t resetTime_ms)
|
|
{
|
|
#if EK3_FEATURE_EXTERNAL_NAV
|
|
// protect against NaN
|
|
if (pos.is_nan() || isnan(posErr)) {
|
|
return;
|
|
}
|
|
|
|
// limit update rate to maximum allowed by sensor buffers and fusion process
|
|
// don't try to write to buffer until the filter has been initialised
|
|
if (((timeStamp_ms - extNavMeasTime_ms) < frontend->extNavIntervalMin_ms) || !statesInitialised) {
|
|
return;
|
|
} else {
|
|
extNavMeasTime_ms = timeStamp_ms;
|
|
}
|
|
|
|
ext_nav_elements extNavDataNew {};
|
|
|
|
if (resetTime_ms != extNavLastPosResetTime_ms) {
|
|
extNavDataNew.posReset = true;
|
|
extNavLastPosResetTime_ms = resetTime_ms;
|
|
} else {
|
|
extNavDataNew.posReset = false;
|
|
}
|
|
|
|
extNavDataNew.pos = pos.toftype();
|
|
extNavDataNew.posErr = posErr;
|
|
|
|
// calculate timestamp
|
|
timeStamp_ms = timeStamp_ms - delay_ms;
|
|
// Correct for the average intersampling delay due to the filter update rate
|
|
timeStamp_ms -= localFilterTimeStep_ms/2;
|
|
// Prevent time delay exceeding age of oldest IMU data in the buffer
|
|
timeStamp_ms = MAX(timeStamp_ms, imuDataDelayed.time_ms);
|
|
extNavDataNew.time_ms = timeStamp_ms;
|
|
|
|
// store position data to buffer
|
|
storedExtNav.push(extNavDataNew);
|
|
|
|
// protect against attitude or angle being NaN
|
|
if (!quat.is_nan() && !isnan(angErr)) {
|
|
// extract yaw from the attitude
|
|
ftype roll_rad, pitch_rad, yaw_rad;
|
|
quat.to_euler(roll_rad, pitch_rad, yaw_rad);
|
|
yaw_elements extNavYawAngDataNew;
|
|
extNavYawAngDataNew.yawAng = yaw_rad;
|
|
extNavYawAngDataNew.yawAngErr = MAX(angErr, radians(5.0f)); // ensure yaw accuracy is no better than 5 degrees (some callers may send zero)
|
|
extNavYawAngDataNew.order = rotationOrder::TAIT_BRYAN_321; // Euler rotation order is 321 (ZYX)
|
|
extNavYawAngDataNew.time_ms = timeStamp_ms;
|
|
storedExtNavYawAng.push(extNavYawAngDataNew);
|
|
}
|
|
#endif // EK3_FEATURE_EXTERNAL_NAV
|
|
}
|
|
|
|
void NavEKF3_core::writeExtNavVelData(const Vector3f &vel, float err, uint32_t timeStamp_ms, uint16_t delay_ms)
|
|
{
|
|
#if EK3_FEATURE_EXTERNAL_NAV
|
|
// sanity check for NaNs
|
|
if (vel.is_nan() || isnan(err)) {
|
|
return;
|
|
}
|
|
|
|
if ((timeStamp_ms - extNavVelMeasTime_ms) < frontend->extNavIntervalMin_ms) {
|
|
return;
|
|
}
|
|
|
|
extNavVelMeasTime_ms = timeStamp_ms;
|
|
useExtNavVel = true;
|
|
// calculate timestamp
|
|
timeStamp_ms = timeStamp_ms - delay_ms;
|
|
// Correct for the average intersampling delay due to the filter updaterate
|
|
timeStamp_ms -= localFilterTimeStep_ms/2;
|
|
// Prevent time delay exceeding age of oldest IMU data in the buffer
|
|
timeStamp_ms = MAX(timeStamp_ms,imuDataDelayed.time_ms);
|
|
|
|
ext_nav_vel_elements extNavVelNew;
|
|
extNavVelNew.time_ms = timeStamp_ms;
|
|
extNavVelNew.vel = vel.toftype();
|
|
extNavVelNew.err = err;
|
|
extNavVelNew.corrected = false;
|
|
|
|
storedExtNavVel.push(extNavVelNew);
|
|
#endif // EK3_FEATURE_EXTERNAL_NAV
|
|
}
|
|
|
|
/*
|
|
update the GPS selection
|
|
*/
|
|
void NavEKF3_core::update_gps_selection(void)
|
|
{
|
|
const auto &gps = dal.gps();
|
|
|
|
// in normal operation use the primary GPS
|
|
selected_gps = gps.primary_sensor();
|
|
preferred_gps = selected_gps;
|
|
|
|
if (frontend->_affinity & EKF_AFFINITY_GPS) {
|
|
if (core_index < gps.num_sensors() ) {
|
|
// always prefer our core_index, unless we don't have that
|
|
// many GPS sensors available
|
|
preferred_gps = core_index;
|
|
}
|
|
if (gps.status(preferred_gps) >= AP_DAL_GPS::GPS_OK_FIX_3D) {
|
|
// select our preferred_gps if it has a 3D fix, otherwise
|
|
// use the primary GPS
|
|
selected_gps = preferred_gps;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
update the mag selection
|
|
*/
|
|
void NavEKF3_core::update_mag_selection(void)
|
|
{
|
|
const auto &compass = dal.compass();
|
|
|
|
if (frontend->_affinity & EKF_AFFINITY_MAG) {
|
|
if (core_index < compass.get_count() &&
|
|
compass.healthy(core_index) &&
|
|
compass.use_for_yaw(core_index)) {
|
|
// use core_index compass if it is healthy
|
|
magSelectIndex = core_index;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
update the baro selection
|
|
*/
|
|
void NavEKF3_core::update_baro_selection(void)
|
|
{
|
|
auto &baro = dal.baro();
|
|
|
|
// in normal operation use the primary baro
|
|
selected_baro = baro.get_primary();
|
|
|
|
if (frontend->_affinity & EKF_AFFINITY_BARO) {
|
|
if (core_index < baro.num_instances() &&
|
|
baro.healthy(core_index)) {
|
|
// use core_index baro if it is healthy
|
|
selected_baro = core_index;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
update the airspeed selection
|
|
*/
|
|
void NavEKF3_core::update_airspeed_selection(void)
|
|
{
|
|
const auto *arsp = dal.airspeed();
|
|
if (arsp == nullptr) {
|
|
return;
|
|
}
|
|
|
|
// in normal operation use the primary airspeed sensor
|
|
selected_airspeed = arsp->get_primary();
|
|
|
|
if (frontend->_affinity & EKF_AFFINITY_ARSP) {
|
|
if (core_index < arsp->get_num_sensors() &&
|
|
arsp->healthy(core_index) &&
|
|
arsp->use(core_index)) {
|
|
// use core_index airspeed if it is healthy
|
|
selected_airspeed = core_index;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
update sensor selections
|
|
*/
|
|
void NavEKF3_core::update_sensor_selection(void)
|
|
{
|
|
update_gps_selection();
|
|
update_mag_selection();
|
|
update_baro_selection();
|
|
update_airspeed_selection();
|
|
}
|
|
|
|
/*
|
|
update timing statistics structure
|
|
*/
|
|
void NavEKF3_core::updateTimingStatistics(void)
|
|
{
|
|
if (timing.count == 0) {
|
|
timing.dtIMUavg_max = dtIMUavg;
|
|
timing.dtIMUavg_min = dtIMUavg;
|
|
timing.dtEKFavg_max = dtEkfAvg;
|
|
timing.dtEKFavg_min = dtEkfAvg;
|
|
timing.delAngDT_max = imuDataDelayed.delAngDT;
|
|
timing.delAngDT_min = imuDataDelayed.delAngDT;
|
|
timing.delVelDT_max = imuDataDelayed.delVelDT;
|
|
timing.delVelDT_min = imuDataDelayed.delVelDT;
|
|
} else {
|
|
timing.dtIMUavg_max = MAX(timing.dtIMUavg_max, dtIMUavg);
|
|
timing.dtIMUavg_min = MIN(timing.dtIMUavg_min, dtIMUavg);
|
|
timing.dtEKFavg_max = MAX(timing.dtEKFavg_max, dtEkfAvg);
|
|
timing.dtEKFavg_min = MIN(timing.dtEKFavg_min, dtEkfAvg);
|
|
timing.delAngDT_max = MAX(timing.delAngDT_max, imuDataDelayed.delAngDT);
|
|
timing.delAngDT_min = MIN(timing.delAngDT_min, imuDataDelayed.delAngDT);
|
|
timing.delVelDT_max = MAX(timing.delVelDT_max, imuDataDelayed.delVelDT);
|
|
timing.delVelDT_min = MIN(timing.delVelDT_min, imuDataDelayed.delVelDT);
|
|
}
|
|
timing.count++;
|
|
}
|
|
|
|
/*
|
|
update estimates of inactive bias states. This keeps inactive IMUs
|
|
as hot-spares so we can switch to them without causing a jump in the
|
|
error
|
|
*/
|
|
void NavEKF3_core::learnInactiveBiases(void)
|
|
{
|
|
#if INS_MAX_INSTANCES == 1
|
|
inactiveBias[0].gyro_bias = stateStruct.gyro_bias;
|
|
inactiveBias[0].accel_bias = stateStruct.accel_bias;
|
|
#else
|
|
const auto &ins = dal.ins();
|
|
|
|
// learn gyro biases
|
|
for (uint8_t i=0; i<INS_MAX_INSTANCES; i++) {
|
|
if (!ins.use_gyro(i)) {
|
|
// can't use this gyro
|
|
continue;
|
|
}
|
|
if (gyro_index_active == i) {
|
|
// use current estimates from main filter of gyro bias
|
|
inactiveBias[i].gyro_bias = stateStruct.gyro_bias;
|
|
} else {
|
|
// get filtered gyro and use the difference between the
|
|
// corrected gyro on the active IMU and the inactive IMU
|
|
// to move the inactive bias towards the right value
|
|
Vector3F filtered_gyro_active = ins.get_gyro(gyro_index_active).toftype() - (stateStruct.gyro_bias/dtEkfAvg);
|
|
Vector3F filtered_gyro_inactive = ins.get_gyro(i).toftype() - (inactiveBias[i].gyro_bias/dtEkfAvg);
|
|
Vector3F error = filtered_gyro_active - filtered_gyro_inactive;
|
|
|
|
// prevent a single large error from contaminating bias estimate
|
|
const ftype bias_limit = radians(5);
|
|
error.x = constrain_ftype(error.x, -bias_limit, bias_limit);
|
|
error.y = constrain_ftype(error.y, -bias_limit, bias_limit);
|
|
error.z = constrain_ftype(error.z, -bias_limit, bias_limit);
|
|
|
|
// slowly bring the inactive gyro in line with the active gyro. This corrects a 5 deg/sec
|
|
// gyro bias error in around 1 minute
|
|
inactiveBias[i].gyro_bias -= error * (1.0e-4f * dtEkfAvg);
|
|
}
|
|
}
|
|
|
|
// learn accel biases
|
|
for (uint8_t i=0; i<INS_MAX_INSTANCES; i++) {
|
|
if (!ins.use_accel(i)) {
|
|
// can't use this accel
|
|
continue;
|
|
}
|
|
if (accel_index_active == i) {
|
|
// use current estimates from main filter of accel bias
|
|
inactiveBias[i].accel_bias = stateStruct.accel_bias;
|
|
} else {
|
|
// get filtered accel and use the difference between the
|
|
// corrected accel on the active IMU and the inactive IMU
|
|
// to move the inactive bias towards the right value
|
|
Vector3F filtered_accel_active = ins.get_accel(accel_index_active).toftype() - (stateStruct.accel_bias/dtEkfAvg);
|
|
Vector3F filtered_accel_inactive = ins.get_accel(i).toftype() - (inactiveBias[i].accel_bias/dtEkfAvg);
|
|
Vector3F error = filtered_accel_active - filtered_accel_inactive;
|
|
|
|
// prevent a single large error from contaminating bias estimate
|
|
const ftype bias_limit = 1.0; // m/s/s
|
|
error.x = constrain_ftype(error.x, -bias_limit, bias_limit);
|
|
error.y = constrain_ftype(error.y, -bias_limit, bias_limit);
|
|
error.z = constrain_ftype(error.z, -bias_limit, bias_limit);
|
|
|
|
// slowly bring the inactive accel in line with the active
|
|
// accel. This corrects a 0.5 m/s/s accel bias error in
|
|
// around 1 minute
|
|
inactiveBias[i].accel_bias -= error * (1.0e-4f * dtEkfAvg);
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
return declination in radians
|
|
*/
|
|
ftype NavEKF3_core::MagDeclination(void) const
|
|
{
|
|
// if we are using the WMM tables then use the table declination
|
|
// to ensure consistency with the table mag field. Otherwise use
|
|
// the declination from the compass library
|
|
if (have_table_earth_field && frontend->_mag_ef_limit > 0) {
|
|
return table_declination;
|
|
}
|
|
if (!use_compass()) {
|
|
return 0;
|
|
}
|
|
return dal.compass().get_declination();
|
|
}
|
|
|
|
/*
|
|
Update the on ground and not moving check.
|
|
Should be called once per IMU update.
|
|
Only updates when on ground and when operating without a magnetometer
|
|
*/
|
|
void NavEKF3_core::updateMovementCheck(void)
|
|
{
|
|
const bool runCheck = onGround && (yaw_source_last == AP_NavEKF_Source::SourceYaw::GPS || yaw_source_last == AP_NavEKF_Source::SourceYaw::GPS_COMPASS_FALLBACK ||
|
|
yaw_source_last == AP_NavEKF_Source::SourceYaw::EXTNAV || yaw_source_last == AP_NavEKF_Source::SourceYaw::GSF || !use_compass());
|
|
if (!runCheck)
|
|
{
|
|
onGroundNotMoving = false;
|
|
return;
|
|
}
|
|
|
|
const ftype gyro_limit = radians(3.0f);
|
|
const ftype gyro_diff_limit = 0.2f;
|
|
const ftype accel_limit = 1.0f;
|
|
const ftype accel_diff_limit = 5.0f;
|
|
const ftype hysteresis_ratio = 0.7f;
|
|
const ftype dtEkfAvgInv = 1.0f / dtEkfAvg;
|
|
|
|
// get latest bias corrected gyro and accelerometer data
|
|
const auto &ins = dal.ins();
|
|
Vector3F gyro = ins.get_gyro(gyro_index_active).toftype() - stateStruct.gyro_bias * dtEkfAvgInv;
|
|
Vector3F accel = ins.get_accel(accel_index_active).toftype() - stateStruct.accel_bias * dtEkfAvgInv;
|
|
|
|
if (!prevOnGround) {
|
|
gyro_prev = gyro;
|
|
accel_prev = accel;
|
|
onGroundNotMoving = false;
|
|
gyro_diff = gyro_diff_limit;
|
|
accel_diff = accel_diff_limit;
|
|
return;
|
|
}
|
|
|
|
// calculate a gyro rate of change metric
|
|
Vector3F temp = (gyro - gyro_prev) * dtEkfAvgInv;
|
|
gyro_prev = gyro;
|
|
gyro_diff = 0.99f * gyro_diff + 0.01f * temp.length();
|
|
|
|
// calculate a acceleration rate of change metric
|
|
temp = (accel - accel_prev) * dtEkfAvgInv;
|
|
accel_prev = accel;
|
|
accel_diff = 0.99f * accel_diff + 0.01f * temp.length();
|
|
|
|
const ftype gyro_length_ratio = gyro.length() / gyro_limit;
|
|
const ftype accel_length_ratio = (accel.length() - GRAVITY_MSS) / accel_limit;
|
|
const ftype gyro_diff_ratio = gyro_diff / gyro_diff_limit;
|
|
const ftype accel_diff_ratio = accel_diff / accel_diff_limit;
|
|
bool logStatusChange = false;
|
|
if (onGroundNotMoving) {
|
|
if (gyro_length_ratio > frontend->_ognmTestScaleFactor ||
|
|
fabsF(accel_length_ratio) > frontend->_ognmTestScaleFactor ||
|
|
gyro_diff_ratio > frontend->_ognmTestScaleFactor ||
|
|
accel_diff_ratio > frontend->_ognmTestScaleFactor)
|
|
{
|
|
onGroundNotMoving = false;
|
|
logStatusChange = true;
|
|
}
|
|
} else if (gyro_length_ratio < frontend->_ognmTestScaleFactor * hysteresis_ratio &&
|
|
fabsF(accel_length_ratio) < frontend->_ognmTestScaleFactor * hysteresis_ratio &&
|
|
gyro_diff_ratio < frontend->_ognmTestScaleFactor * hysteresis_ratio &&
|
|
accel_diff_ratio < frontend->_ognmTestScaleFactor * hysteresis_ratio)
|
|
{
|
|
onGroundNotMoving = true;
|
|
logStatusChange = true;
|
|
}
|
|
|
|
if (logStatusChange || imuSampleTime_ms - lastMoveCheckLogTime_ms > 200) {
|
|
lastMoveCheckLogTime_ms = imuSampleTime_ms;
|
|
#if HAL_LOGGING_ENABLED
|
|
const struct log_XKFM pkt{
|
|
LOG_PACKET_HEADER_INIT(LOG_XKFM_MSG),
|
|
time_us : dal.micros64(),
|
|
core : core_index,
|
|
ongroundnotmoving : onGroundNotMoving,
|
|
gyro_length_ratio : float(gyro_length_ratio),
|
|
accel_length_ratio : float(accel_length_ratio),
|
|
gyro_diff_ratio : float(gyro_diff_ratio),
|
|
accel_diff_ratio : float(accel_diff_ratio),
|
|
};
|
|
AP::logger().WriteBlock(&pkt, sizeof(pkt));
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void NavEKF3_core::SampleDragData(const imu_elements &imu)
|
|
{
|
|
#if EK3_FEATURE_DRAG_FUSION
|
|
// Average and down sample to 5Hz
|
|
const ftype bcoef_x = frontend->_ballisticCoef_x;
|
|
const ftype bcoef_y = frontend->_ballisticCoef_y;
|
|
const ftype mcoef = frontend->_momentumDragCoef.get();
|
|
const bool using_bcoef_x = bcoef_x > 1.0f;
|
|
const bool using_bcoef_y = bcoef_y > 1.0f;
|
|
const bool using_mcoef = mcoef > 0.001f;
|
|
if (!using_bcoef_x && !using_bcoef_y && !using_mcoef) {
|
|
// nothing to do
|
|
dragFusionEnabled = false;
|
|
return;
|
|
}
|
|
|
|
dragFusionEnabled = true;
|
|
|
|
// down-sample the drag specific force data by accumulating and calculating the mean when
|
|
// sufficient samples have been collected
|
|
|
|
dragSampleCount ++;
|
|
|
|
// note acceleration is accumulated as a delta velocity
|
|
dragDownSampled.accelXY.x += imu.delVel.x;
|
|
dragDownSampled.accelXY.y += imu.delVel.y;
|
|
dragDownSampled.time_ms += imu.time_ms;
|
|
dragSampleTimeDelta += imu.delVelDT;
|
|
|
|
// calculate and store means from accumulated values
|
|
if (dragSampleTimeDelta > 0.2f - 0.5f * EKF_TARGET_DT) {
|
|
// note conversion from accumulated delta velocity to acceleration
|
|
dragDownSampled.accelXY.x /= dragSampleTimeDelta;
|
|
dragDownSampled.accelXY.y /= dragSampleTimeDelta;
|
|
dragDownSampled.time_ms /= dragSampleCount;
|
|
|
|
// write to buffer
|
|
storedDrag.push(dragDownSampled);
|
|
|
|
// reset accumulators
|
|
dragSampleCount = 0;
|
|
dragDownSampled.accelXY.zero();
|
|
dragDownSampled.time_ms = 0;
|
|
dragSampleTimeDelta = 0.0f;
|
|
}
|
|
#endif // EK3_FEATURE_DRAG_FUSION
|
|
}
|
|
|
|
/*
|
|
get the earth mag field
|
|
*/
|
|
void NavEKF3_core::getEarthFieldTable(const Location &loc)
|
|
{
|
|
table_earth_field_ga = AP_Declination::get_earth_field_ga(loc).toftype();
|
|
table_declination = radians(AP_Declination::get_declination(loc.lat*1.0e-7,
|
|
loc.lng*1.0e-7));
|
|
have_table_earth_field = true;
|
|
}
|
|
|
|
/*
|
|
update earth field, called at 1Hz
|
|
*/
|
|
void NavEKF3_core::checkUpdateEarthField(void)
|
|
{
|
|
if (have_table_earth_field && filterStatus.flags.using_gps) {
|
|
Location loc = EKF_origin;
|
|
loc.offset(stateStruct.position.x, stateStruct.position.y);
|
|
getEarthFieldTable(loc);
|
|
}
|
|
}
|