ardupilot/libraries/AP_HAL_ChibiOS/hwdef/MatekH743/hwdef-bl.dat

51 lines
1.0 KiB
Plaintext

# hw definition file for processing by chibios_pins.py
# for Matek H743-WING bootloader
# MCU class and specific type
MCU STM32H7xx STM32H743xx
# board ID for firmware load
APJ_BOARD_ID 1013
# crystal frequency, setup to use external oscillator
OSCILLATOR_HZ 8000000
FLASH_SIZE_KB 2048
# bootloader starts at zero offset
FLASH_RESERVE_START_KB 0
# use last 2 pages for flash storage
# H743 has 16 pages of 128k each
STORAGE_FLASH_PAGE 14
# the location where the bootloader will put the firmware
# the H743 has 128k sectors
FLASH_BOOTLOADER_LOAD_KB 128
# order of UARTs (and USB). Allow bootloading on USB and telem1
SERIAL_ORDER OTG1 UART7
# UART7 (telem1)
PE7 UART7_RX UART7 NODMA
PE8 UART7_TX UART7 NODMA
# PA10 IO-debug-console
PA11 OTG_FS_DM OTG1
PA12 OTG_FS_DP OTG1
PA13 JTMS-SWDIO SWD
PA14 JTCK-SWCLK SWD
PE3 LED_BOOTLOADER OUTPUT LOW
define HAL_LED_ON 0
# Add CS pins to ensure they are high in bootloader
PC15 IMU1_CS CS
PB12 MAX7456_CS CS
PE11 IMU2_CS CS
PD4 EXT_CS1 CS
PE2 EXT_CS2 CS
PC13 IMU3_CS CS