mirror of https://github.com/ArduPilot/ardupilot
41 lines
1.0 KiB
Plaintext
41 lines
1.0 KiB
Plaintext
# hw definition file for processing by chibios_hwdef.py
|
|
# for Swan-K1 (HWing) from Foxtech
|
|
# This is a variant of fmuv5 without the IOMCU
|
|
|
|
include ../fmuv5/hwdef.dat
|
|
|
|
# order of UARTs (and USB). Telem2 is UART4 on the mini, USART3 is not available
|
|
SERIAL_ORDER OTG1 USART2 UART4 USART1 USART6 UART7 OTG2
|
|
|
|
# enable TX on USART6 (disabled for fmuv5 with iomcu)
|
|
PG14 USART6_TX USART6 NODMA
|
|
|
|
# start with PE3 low
|
|
undef PE3
|
|
PE3 VDD_3V3_SENSORS_EN OUTPUT LOW
|
|
|
|
# disable the IOMCU UART
|
|
undef IOMCU_UART
|
|
undef UART8_TX
|
|
undef UART8_RX
|
|
undef AP_FEATURE_SBUS_OUT
|
|
|
|
# RCInput on the PPM pin, for all protocols
|
|
PI5 TIM8_CH1 TIM8 RCININT PULLDOWN LOW
|
|
|
|
# setup for supplied power brick
|
|
undef HAL_BATT_VOLT_SCALE
|
|
define HAL_BATT_VOLT_SCALE 18.182
|
|
undef HAL_BATT_CURR_SCALE
|
|
define HAL_BATT_CURR_SCALE 36.364
|
|
|
|
# this board has a 16k RAMTROM
|
|
undef HAL_STORAGE_SIZE
|
|
define HAL_STORAGE_SIZE 16384
|
|
define HAL_WITH_RAMTRON 1
|
|
|
|
# use a longer frame gap detector for more robust SBUS with H12 controller
|
|
define HAL_SBUS_FRAME_GAP 5000U
|
|
|
|
AUTOBUILD_TARGETS Plane
|