mirror of https://github.com/ArduPilot/ardupilot
1089 lines
47 KiB
C++
1089 lines
47 KiB
C++
#include <AP_HAL/AP_HAL.h>
|
|
|
|
#include "AP_NavEKF2_core.h"
|
|
#include <GCS_MAVLink/GCS.h>
|
|
#include <AP_DAL/AP_DAL.h>
|
|
#include <AP_InternalError/AP_InternalError.h>
|
|
|
|
extern const AP_HAL::HAL& hal;
|
|
|
|
|
|
/********************************************************
|
|
* OPT FLOW AND RANGE FINDER *
|
|
********************************************************/
|
|
|
|
// Read the range finder and take new measurements if available
|
|
// Apply a median filter
|
|
void NavEKF2_core::readRangeFinder(void)
|
|
{
|
|
uint8_t midIndex;
|
|
uint8_t maxIndex;
|
|
uint8_t minIndex;
|
|
|
|
// get theoretical correct range when the vehicle is on the ground
|
|
// don't allow range to go below 5cm because this can cause problems with optical flow processing
|
|
const auto *_rng = dal.rangefinder();
|
|
if (_rng == nullptr) {
|
|
return;
|
|
}
|
|
|
|
rngOnGnd = MAX(_rng->ground_clearance_cm_orient(ROTATION_PITCH_270) * 0.01f, 0.05f);
|
|
|
|
// read range finder at 20Hz
|
|
// TODO better way of knowing if it has new data
|
|
if (_rng && (imuSampleTime_ms - lastRngMeasTime_ms) > 50) {
|
|
|
|
// reset the timer used to control the measurement rate
|
|
lastRngMeasTime_ms = imuSampleTime_ms;
|
|
|
|
// store samples and sample time into a ring buffer if valid
|
|
// use data from two range finders if available
|
|
|
|
for (uint8_t sensorIndex = 0; sensorIndex <= 1; sensorIndex++) {
|
|
auto *sensor = _rng->get_backend(sensorIndex);
|
|
if (sensor == nullptr) {
|
|
continue;
|
|
}
|
|
if ((sensor->orientation() == ROTATION_PITCH_270) && (sensor->status() == AP_DAL_RangeFinder::Status::Good)) {
|
|
rngMeasIndex[sensorIndex] ++;
|
|
if (rngMeasIndex[sensorIndex] > 2) {
|
|
rngMeasIndex[sensorIndex] = 0;
|
|
}
|
|
storedRngMeasTime_ms[sensorIndex][rngMeasIndex[sensorIndex]] = imuSampleTime_ms - 25;
|
|
storedRngMeas[sensorIndex][rngMeasIndex[sensorIndex]] = sensor->distance_cm() * 0.01f;
|
|
} else {
|
|
continue;
|
|
}
|
|
|
|
// check for three fresh samples
|
|
bool sampleFresh[2][3] = {};
|
|
for (uint8_t index = 0; index <= 2; index++) {
|
|
sampleFresh[sensorIndex][index] = (imuSampleTime_ms - storedRngMeasTime_ms[sensorIndex][index]) < 500;
|
|
}
|
|
|
|
// find the median value if we have three fresh samples
|
|
if (sampleFresh[sensorIndex][0] && sampleFresh[sensorIndex][1] && sampleFresh[sensorIndex][2]) {
|
|
if (storedRngMeas[sensorIndex][0] > storedRngMeas[sensorIndex][1]) {
|
|
minIndex = 1;
|
|
maxIndex = 0;
|
|
} else {
|
|
minIndex = 0;
|
|
maxIndex = 1;
|
|
}
|
|
if (storedRngMeas[sensorIndex][2] > storedRngMeas[sensorIndex][maxIndex]) {
|
|
midIndex = maxIndex;
|
|
} else if (storedRngMeas[sensorIndex][2] < storedRngMeas[sensorIndex][minIndex]) {
|
|
midIndex = minIndex;
|
|
} else {
|
|
midIndex = 2;
|
|
}
|
|
|
|
// don't allow time to go backwards
|
|
if (storedRngMeasTime_ms[sensorIndex][midIndex] > rangeDataNew.time_ms) {
|
|
rangeDataNew.time_ms = storedRngMeasTime_ms[sensorIndex][midIndex];
|
|
}
|
|
|
|
// limit the measured range to be no less than the on-ground range
|
|
rangeDataNew.rng = MAX(storedRngMeas[sensorIndex][midIndex],rngOnGnd);
|
|
|
|
// get position in body frame for the current sensor
|
|
rangeDataNew.sensor_idx = sensorIndex;
|
|
|
|
// write data to buffer with time stamp to be fused when the fusion time horizon catches up with it
|
|
storedRange.push(rangeDataNew);
|
|
|
|
// indicate we have updated the measurement
|
|
rngValidMeaTime_ms = imuSampleTime_ms;
|
|
|
|
} else if (!takeOffDetected && ((imuSampleTime_ms - rngValidMeaTime_ms) > 200)) {
|
|
// before takeoff we assume on-ground range value if there is no data
|
|
rangeDataNew.time_ms = imuSampleTime_ms;
|
|
rangeDataNew.rng = rngOnGnd;
|
|
|
|
// write data to buffer with time stamp to be fused when the fusion time horizon catches up with it
|
|
storedRange.push(rangeDataNew);
|
|
|
|
// indicate we have updated the measurement
|
|
rngValidMeaTime_ms = imuSampleTime_ms;
|
|
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
// write the raw optical flow measurements
|
|
// this needs to be called externally.
|
|
void NavEKF2_core::writeOptFlowMeas(const uint8_t rawFlowQuality, const Vector2f &rawFlowRates, const Vector2f &rawGyroRates, const uint32_t msecFlowMeas, const Vector3f &posOffset)
|
|
{
|
|
// The raw measurements need to be optical flow rates in radians/second averaged across the time since the last update
|
|
// The PX4Flow sensor outputs flow rates with the following axis and sign conventions:
|
|
// A positive X rate is produced by a positive sensor rotation about the X axis
|
|
// A positive Y rate is produced by a positive sensor rotation about the Y axis
|
|
// This filter uses a different definition of optical flow rates to the sensor with a positive optical flow rate produced by a
|
|
// negative rotation about that axis. For example a positive rotation of the flight vehicle about its X (roll) axis would produce a negative X flow rate
|
|
flowMeaTime_ms = imuSampleTime_ms;
|
|
// calculate bias errors on flow sensor gyro rates, but protect against spikes in data
|
|
// reset the accumulated body delta angle and time
|
|
// don't do the calculation if not enough time lapsed for a reliable body rate measurement
|
|
if (delTimeOF > 0.01f) {
|
|
flowGyroBias.x = 0.99f * flowGyroBias.x + 0.01f * constrain_ftype((rawGyroRates.x - delAngBodyOF.x/delTimeOF),-0.1f,0.1f);
|
|
flowGyroBias.y = 0.99f * flowGyroBias.y + 0.01f * constrain_ftype((rawGyroRates.y - delAngBodyOF.y/delTimeOF),-0.1f,0.1f);
|
|
delAngBodyOF.zero();
|
|
delTimeOF = 0.0f;
|
|
}
|
|
// by definition if this function is called, then flow measurements have been provided so we
|
|
// need to run the optical flow takeoff detection
|
|
detectOptFlowTakeoff();
|
|
|
|
// calculate rotation matrices at mid sample time for flow observations
|
|
stateStruct.quat.rotation_matrix(Tbn_flow);
|
|
// don't use data with a low quality indicator or extreme rates (helps catch corrupt sensor data)
|
|
if ((rawFlowQuality > 0) && rawFlowRates.length() < 4.2f && rawGyroRates.length() < 4.2f) {
|
|
// correct flow sensor body rates for bias and write
|
|
ofDataNew.bodyRadXYZ.x = rawGyroRates.x - flowGyroBias.x;
|
|
ofDataNew.bodyRadXYZ.y = rawGyroRates.y - flowGyroBias.y;
|
|
// the sensor interface doesn't provide a z axis rate so use the rate from the nav sensor instead
|
|
if (delTimeOF > 0.001f) {
|
|
// first preference is to use the rate averaged over the same sampling period as the flow sensor
|
|
ofDataNew.bodyRadXYZ.z = delAngBodyOF.z / delTimeOF;
|
|
} else if (imuDataNew.delAngDT > 0.001f){
|
|
// second preference is to use most recent IMU data
|
|
ofDataNew.bodyRadXYZ.z = imuDataNew.delAng.z / imuDataNew.delAngDT;
|
|
} else {
|
|
// third preference is use zero
|
|
ofDataNew.bodyRadXYZ.z = 0.0f;
|
|
}
|
|
// write uncorrected flow rate measurements
|
|
// note correction for different axis and sign conventions used by the px4flow sensor
|
|
ofDataNew.flowRadXY = (-rawFlowRates).toftype(); // raw (non motion compensated) optical flow angular rate about the X axis (rad/sec)
|
|
// write the flow sensor position in body frame
|
|
ofDataNew.body_offset = posOffset.toftype();
|
|
// write flow rate measurements corrected for body rates
|
|
ofDataNew.flowRadXYcomp.x = ofDataNew.flowRadXY.x + ofDataNew.bodyRadXYZ.x;
|
|
ofDataNew.flowRadXYcomp.y = ofDataNew.flowRadXY.y + ofDataNew.bodyRadXYZ.y;
|
|
// record time last observation was received so we can detect loss of data elsewhere
|
|
flowValidMeaTime_ms = imuSampleTime_ms;
|
|
// estimate sample time of the measurement
|
|
ofDataNew.time_ms = imuSampleTime_ms - frontend->_flowDelay_ms - frontend->flowTimeDeltaAvg_ms/2;
|
|
// Correct for the average intersampling delay due to the filter updaterate
|
|
ofDataNew.time_ms -= localFilterTimeStep_ms/2;
|
|
// Prevent time delay exceeding age of oldest IMU data in the buffer
|
|
ofDataNew.time_ms = MAX(ofDataNew.time_ms,imuDataDelayed.time_ms);
|
|
// Save data to buffer
|
|
storedOF.push(ofDataNew);
|
|
// Check for data at the fusion time horizon
|
|
flowDataToFuse = storedOF.recall(ofDataDelayed, imuDataDelayed.time_ms);
|
|
}
|
|
}
|
|
|
|
|
|
/********************************************************
|
|
* MAGNETOMETER *
|
|
********************************************************/
|
|
|
|
// try changing to another compass
|
|
void NavEKF2_core::tryChangeCompass(void)
|
|
{
|
|
const auto &compass = dal.compass();
|
|
const uint8_t maxCount = compass.get_count();
|
|
|
|
// search through the list of magnetometers
|
|
for (uint8_t i=1; i<maxCount; i++) {
|
|
uint8_t tempIndex = magSelectIndex + i;
|
|
// loop back to the start index if we have exceeded the bounds
|
|
if (tempIndex >= maxCount) {
|
|
tempIndex -= maxCount;
|
|
}
|
|
// if the magnetometer is allowed to be used for yaw and has a different index, we start using it
|
|
if (compass.healthy(tempIndex) && compass.use_for_yaw(tempIndex) && tempIndex != magSelectIndex) {
|
|
magSelectIndex = tempIndex;
|
|
GCS_SEND_TEXT(MAV_SEVERITY_INFO, "EKF2 IMU%u switching to compass %u",(unsigned)imu_index,magSelectIndex);
|
|
// reset the timeout flag and timer
|
|
magTimeout = false;
|
|
lastHealthyMagTime_ms = imuSampleTime_ms;
|
|
// zero the learned magnetometer bias states
|
|
stateStruct.body_magfield.zero();
|
|
// clear the measurement buffer
|
|
storedMag.reset();
|
|
// clear the data waiting flag so that we do not use any data pending from the previous sensor
|
|
magDataToFuse = false;
|
|
// request a reset of the magnetic field states
|
|
magStateResetRequest = true;
|
|
// declare the field unlearned so that the reset request will be obeyed
|
|
magFieldLearned = false;
|
|
|
|
// reset body mag variances on next CovariancePrediction
|
|
needMagBodyVarReset = true;
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
// check for new magnetometer data and update store measurements if available
|
|
void NavEKF2_core::readMagData()
|
|
{
|
|
const auto &compass = dal.compass();
|
|
|
|
if (!compass.available()) {
|
|
allMagSensorsFailed = true;
|
|
return;
|
|
}
|
|
|
|
// If we are a vehicle with a sideslip constraint to aid yaw estimation and we have timed out on our last avialable
|
|
// magnetometer, then declare the magnetometers as failed for this flight
|
|
const uint8_t maxCount = compass.get_count();
|
|
if (allMagSensorsFailed || (magTimeout && assume_zero_sideslip() && magSelectIndex >= maxCount-1 && inFlight)) {
|
|
allMagSensorsFailed = true;
|
|
return;
|
|
}
|
|
|
|
if (compass.learn_offsets_enabled()) {
|
|
// while learning offsets keep all mag states reset
|
|
InitialiseVariablesMag();
|
|
wasLearningCompass_ms = imuSampleTime_ms;
|
|
} else if (wasLearningCompass_ms != 0 && imuSampleTime_ms - wasLearningCompass_ms > 1000) {
|
|
wasLearningCompass_ms = 0;
|
|
// force a new yaw alignment 1s after learning completes. The
|
|
// delay is to ensure any buffered mag samples are discarded
|
|
yawAlignComplete = false;
|
|
InitialiseVariablesMag();
|
|
}
|
|
|
|
// If the magnetometer has timed out (been rejected for too long), we find another magnetometer to use if available
|
|
// Don't do this if we are on the ground because there can be magnetic interference and we need to know if there is a problem
|
|
// before taking off. Don't do this within the first 30 seconds from startup because the yaw error could be due to large yaw gyro bias affsets
|
|
// if the timeout is due to a sensor failure, then declare a timeout regardless of onground status
|
|
if (maxCount > 1) {
|
|
bool fusionTimeout = magTimeout && !onGround && imuSampleTime_ms - ekfStartTime_ms > 30000;
|
|
bool sensorTimeout = !compass.healthy(magSelectIndex) && imuSampleTime_ms - lastMagRead_ms > frontend->magFailTimeLimit_ms;
|
|
if (fusionTimeout || sensorTimeout) {
|
|
tryChangeCompass();
|
|
}
|
|
}
|
|
|
|
// do not accept new compass data faster than 14Hz (nominal rate is 10Hz) to prevent high processor loading
|
|
// because magnetometer fusion is an expensive step and we could overflow the FIFO buffer
|
|
if (use_compass() &&
|
|
compass.healthy(magSelectIndex) &&
|
|
compass.last_update_usec(magSelectIndex) - lastMagUpdate_us > 70000) {
|
|
|
|
// detect changes to magnetometer offset parameters and reset states
|
|
Vector3F nowMagOffsets = compass.get_offsets(magSelectIndex).toftype();
|
|
bool changeDetected = lastMagOffsetsValid && (nowMagOffsets != lastMagOffsets);
|
|
if (changeDetected) {
|
|
// zero the learned magnetometer bias states
|
|
stateStruct.body_magfield.zero();
|
|
// clear the measurement buffer
|
|
storedMag.reset();
|
|
// reset body mag variances on next
|
|
// CovariancePrediction. This copes with possible errors
|
|
// in the new offsets
|
|
needMagBodyVarReset = true;
|
|
}
|
|
lastMagOffsets = nowMagOffsets;
|
|
lastMagOffsetsValid = true;
|
|
|
|
// store time of last measurement update
|
|
lastMagUpdate_us = compass.last_update_usec(magSelectIndex);
|
|
|
|
// Magnetometer data at the current time horizon
|
|
mag_elements magDataNew;
|
|
|
|
// estimate of time magnetometer measurement was taken, allowing for delays
|
|
magDataNew.time_ms = imuSampleTime_ms - frontend->magDelay_ms;
|
|
|
|
// Correct for the average intersampling delay due to the filter updaterate
|
|
magDataNew.time_ms -= localFilterTimeStep_ms/2;
|
|
|
|
// read compass data and scale to improve numerical conditioning
|
|
magDataNew.mag = compass.get_field(magSelectIndex).toftype() * 0.001f;
|
|
|
|
// check for consistent data between magnetometers
|
|
consistentMagData = compass.consistent();
|
|
|
|
// save magnetometer measurement to buffer to be fused later
|
|
storedMag.push(magDataNew);
|
|
|
|
// remember time we read compass, to detect compass sensor failure
|
|
lastMagRead_ms = imuSampleTime_ms;
|
|
}
|
|
}
|
|
|
|
/********************************************************
|
|
* Inertial Measurements *
|
|
********************************************************/
|
|
|
|
/*
|
|
* Read IMU delta angle and delta velocity measurements and downsample to 100Hz
|
|
* for storage in the data buffers used by the EKF. If the IMU data arrives at
|
|
* lower rate than 100Hz, then no downsampling or upsampling will be performed.
|
|
* Downsampling is done using a method that does not introduce coning or sculling
|
|
* errors.
|
|
*/
|
|
void NavEKF2_core::readIMUData()
|
|
{
|
|
const auto &ins = dal.ins();
|
|
|
|
// average IMU sampling rate
|
|
dtIMUavg = ins.get_loop_delta_t();
|
|
|
|
// use the nominated imu or primary if not available
|
|
uint8_t accel_active, gyro_active;
|
|
|
|
if (ins.use_accel(imu_index)) {
|
|
accel_active = imu_index;
|
|
} else {
|
|
accel_active = ins.get_primary_accel();
|
|
}
|
|
|
|
if (ins.use_gyro(imu_index)) {
|
|
gyro_active = imu_index;
|
|
} else {
|
|
gyro_active = ins.get_primary_gyro();
|
|
}
|
|
|
|
if (gyro_active != gyro_index_active) {
|
|
// we are switching active gyro at runtime. Copy over the
|
|
// biases we have learned from the previously inactive
|
|
// gyro. We don't re-init the bias uncertainty as it should
|
|
// have the same uncertainty as the previously active gyro
|
|
stateStruct.gyro_bias = inactiveBias[gyro_active].gyro_bias;
|
|
gyro_index_active = gyro_active;
|
|
|
|
// use the gyro scale factor we have previously used on this
|
|
// IMU (if any). We don't reset the variances as we don't want
|
|
// errors after switching to be mis-assigned to the gyro scale
|
|
// factor
|
|
stateStruct.gyro_scale = inactiveBias[gyro_active].gyro_scale;
|
|
}
|
|
|
|
if (accel_active != accel_index_active) {
|
|
// switch to the learned accel bias for this IMU
|
|
stateStruct.accel_zbias = inactiveBias[accel_active].accel_zbias;
|
|
accel_index_active = accel_active;
|
|
}
|
|
|
|
// update the inactive bias states
|
|
learnInactiveBiases();
|
|
|
|
readDeltaVelocity(accel_index_active, imuDataNew.delVel, imuDataNew.delVelDT);
|
|
accelPosOffset = ins.get_imu_pos_offset(accel_index_active).toftype();
|
|
imuDataNew.accel_index = accel_index_active;
|
|
|
|
// Get delta angle data from primary gyro or primary if not available
|
|
readDeltaAngle(gyro_index_active, imuDataNew.delAng, imuDataNew.delAngDT);
|
|
imuDataNew.gyro_index = gyro_index_active;
|
|
|
|
// Get current time stamp
|
|
imuDataNew.time_ms = imuSampleTime_ms;
|
|
|
|
// use the most recent IMU index for the downsampled IMU
|
|
// data. This isn't strictly correct if we switch IMUs between
|
|
// samples
|
|
imuDataDownSampledNew.gyro_index = imuDataNew.gyro_index;
|
|
imuDataDownSampledNew.accel_index = imuDataNew.accel_index;
|
|
|
|
// Accumulate the measurement time interval for the delta velocity and angle data
|
|
imuDataDownSampledNew.delAngDT += imuDataNew.delAngDT;
|
|
imuDataDownSampledNew.delVelDT += imuDataNew.delVelDT;
|
|
|
|
// Rotate quaternon atitude from previous to new and normalise.
|
|
// Accumulation using quaternions prevents introduction of coning errors due to downsampling
|
|
imuQuatDownSampleNew.rotate(imuDataNew.delAng);
|
|
imuQuatDownSampleNew.normalize();
|
|
|
|
// Rotate the latest delta velocity into body frame at the start of accumulation
|
|
Matrix3F deltaRotMat;
|
|
imuQuatDownSampleNew.rotation_matrix(deltaRotMat);
|
|
|
|
// Apply the delta velocity to the delta velocity accumulator
|
|
imuDataDownSampledNew.delVel += deltaRotMat*imuDataNew.delVel;
|
|
|
|
// Keep track of the number of IMU frames since the last state prediction
|
|
framesSincePredict++;
|
|
|
|
/*
|
|
* If the target EKF time step has been accumulated, and the frontend has allowed start of a new predict cycle,
|
|
* then store the accumulated IMU data to be used by the state prediction, ignoring the frontend permission if more
|
|
* than twice the target time has lapsed. Adjust the target EKF step time threshold to allow for timing jitter in the
|
|
* IMU data.
|
|
*/
|
|
if ((dtIMUavg*(float)framesSincePredict >= (EKF_TARGET_DT-(dtIMUavg*0.5)) &&
|
|
startPredictEnabled) || (dtIMUavg*(float)framesSincePredict >= 2.0f*EKF_TARGET_DT)) {
|
|
|
|
// convert the accumulated quaternion to an equivalent delta angle
|
|
imuQuatDownSampleNew.to_axis_angle(imuDataDownSampledNew.delAng);
|
|
|
|
// Time stamp the data
|
|
imuDataDownSampledNew.time_ms = imuSampleTime_ms;
|
|
|
|
// Write data to the FIFO IMU buffer
|
|
storedIMU.push_youngest_element(imuDataDownSampledNew);
|
|
|
|
// calculate the achieved average time step rate for the EKF
|
|
ftype dtNow = constrain_ftype(0.5f*(imuDataDownSampledNew.delAngDT+imuDataDownSampledNew.delVelDT),0.0f,10.0f*EKF_TARGET_DT);
|
|
dtEkfAvg = 0.98f * dtEkfAvg + 0.02f * dtNow;
|
|
|
|
// zero the accumulated IMU data and quaternion
|
|
imuDataDownSampledNew.delAng.zero();
|
|
imuDataDownSampledNew.delVel.zero();
|
|
imuDataDownSampledNew.delAngDT = 0.0f;
|
|
imuDataDownSampledNew.delVelDT = 0.0f;
|
|
imuDataDownSampledNew.gyro_index = gyro_index_active;
|
|
imuDataDownSampledNew.accel_index = accel_index_active;
|
|
imuQuatDownSampleNew[0] = 1.0f;
|
|
imuQuatDownSampleNew[3] = imuQuatDownSampleNew[2] = imuQuatDownSampleNew[1] = 0.0f;
|
|
|
|
// reset the counter used to let the frontend know how many frames have elapsed since we started a new update cycle
|
|
framesSincePredict = 0;
|
|
|
|
// set the flag to let the filter know it has new IMU data and needs to run
|
|
runUpdates = true;
|
|
|
|
// extract the oldest available data from the FIFO buffer
|
|
imuDataDelayed = storedIMU.get_oldest_element();
|
|
|
|
// protect against delta time going to zero
|
|
// TODO - check if calculations can tolerate 0
|
|
ftype minDT = 0.1f*dtEkfAvg;
|
|
imuDataDelayed.delAngDT = MAX(imuDataDelayed.delAngDT,minDT);
|
|
imuDataDelayed.delVelDT = MAX(imuDataDelayed.delVelDT,minDT);
|
|
|
|
updateTimingStatistics();
|
|
|
|
// correct the extracted IMU data for sensor errors
|
|
delAngCorrected = imuDataDelayed.delAng;
|
|
delVelCorrected = imuDataDelayed.delVel;
|
|
correctDeltaAngle(delAngCorrected, imuDataDelayed.delAngDT, imuDataDelayed.gyro_index);
|
|
correctDeltaVelocity(delVelCorrected, imuDataDelayed.delVelDT, imuDataDelayed.accel_index);
|
|
|
|
} else {
|
|
// we don't have new IMU data in the buffer so don't run filter updates on this time step
|
|
runUpdates = false;
|
|
}
|
|
}
|
|
|
|
// read the delta velocity and corresponding time interval from the IMU
|
|
// return false if data is not available
|
|
bool NavEKF2_core::readDeltaVelocity(uint8_t ins_index, Vector3F &dVel, ftype &dVel_dt) {
|
|
const auto &ins = dal.ins();
|
|
|
|
if (ins_index < ins.get_accel_count()) {
|
|
Vector3f dVelF;
|
|
float dVel_dtF;
|
|
ins.get_delta_velocity(ins_index, dVelF, dVel_dtF);
|
|
dVel = dVelF.toftype();
|
|
dVel_dt = dVel_dtF;
|
|
dVel_dt = MAX(dVel_dt,1.0e-4f);
|
|
dVel_dt = MIN(dVel_dt,1.0e-1f);
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
/********************************************************
|
|
* Global Position Measurement *
|
|
********************************************************/
|
|
|
|
// check for new valid GPS data and update stored measurement if available
|
|
void NavEKF2_core::readGpsData()
|
|
{
|
|
if (frontend->_fusionModeGPS == 3) {
|
|
// don't read GPS data if GPS usage disabled
|
|
return;
|
|
}
|
|
|
|
// check for new GPS data
|
|
// do not accept data at a faster rate than 14Hz to avoid overflowing the FIFO buffer
|
|
const auto &gps = dal.gps();
|
|
if (gps.last_message_time_ms(gps.primary_sensor()) - lastTimeGpsReceived_ms > 70) {
|
|
if (gps.status() >= AP_DAL_GPS::GPS_OK_FIX_3D) {
|
|
// report GPS fix status
|
|
gpsCheckStatus.bad_fix = false;
|
|
|
|
// store fix time from previous read
|
|
const uint32_t secondLastGpsTime_ms = lastTimeGpsReceived_ms;
|
|
|
|
// get current fix time
|
|
lastTimeGpsReceived_ms = gps.last_message_time_ms(gps.primary_sensor());
|
|
|
|
|
|
// estimate when the GPS fix was valid, allowing for GPS processing and other delays
|
|
// ideally we should be using a timing signal from the GPS receiver to set this time
|
|
float gps_delay = 0.0;
|
|
gps.get_lag(gps_delay); // ignore the return value
|
|
gpsDataNew.time_ms = lastTimeGpsReceived_ms - (uint32_t)(1e3f * gps_delay);
|
|
|
|
// Correct for the average intersampling delay due to the filter updaterate
|
|
gpsDataNew.time_ms -= localFilterTimeStep_ms/2;
|
|
|
|
// Prevent time delay exceeding age of oldest IMU data in the buffer
|
|
gpsDataNew.time_ms = MAX(gpsDataNew.time_ms,imuDataDelayed.time_ms);
|
|
|
|
// Get which GPS we are using for position information
|
|
gpsDataNew.sensor_idx = gps.primary_sensor();
|
|
|
|
// read the NED velocity from the GPS
|
|
gpsDataNew.vel = gps.velocity().toftype();
|
|
|
|
// Use the speed and position accuracy from the GPS if available, otherwise set it to zero.
|
|
// Apply a decaying envelope filter with a 5 second time constant to the raw accuracy data
|
|
ftype alpha = constrain_ftype(0.0002f * (lastTimeGpsReceived_ms - secondLastGpsTime_ms),0.0f,1.0f);
|
|
gpsSpdAccuracy *= (1.0f - alpha);
|
|
float gpsSpdAccRaw;
|
|
if (!gps.speed_accuracy(gpsSpdAccRaw)) {
|
|
gpsSpdAccuracy = 0.0f;
|
|
} else {
|
|
gpsSpdAccuracy = MAX(gpsSpdAccuracy,gpsSpdAccRaw);
|
|
gpsSpdAccuracy = MIN(gpsSpdAccuracy,50.0f);
|
|
gpsSpdAccuracy = MAX(gpsSpdAccuracy,frontend->_gpsHorizVelNoise);
|
|
}
|
|
gpsPosAccuracy *= (1.0f - alpha);
|
|
float gpsPosAccRaw;
|
|
if (!gps.horizontal_accuracy(gpsPosAccRaw)) {
|
|
gpsPosAccuracy = 0.0f;
|
|
} else {
|
|
gpsPosAccuracy = MAX(gpsPosAccuracy,gpsPosAccRaw);
|
|
gpsPosAccuracy = MIN(gpsPosAccuracy,100.0f);
|
|
gpsPosAccuracy = MAX(gpsPosAccuracy, frontend->_gpsHorizPosNoise);
|
|
}
|
|
gpsHgtAccuracy *= (1.0f - alpha);
|
|
float gpsHgtAccRaw;
|
|
if (!gps.vertical_accuracy(gpsHgtAccRaw)) {
|
|
gpsHgtAccuracy = 0.0f;
|
|
} else {
|
|
gpsHgtAccuracy = MAX(gpsHgtAccuracy,gpsHgtAccRaw);
|
|
gpsHgtAccuracy = MIN(gpsHgtAccuracy,100.0f);
|
|
gpsHgtAccuracy = MAX(gpsHgtAccuracy, 1.5f * frontend->_gpsHorizPosNoise);
|
|
}
|
|
|
|
// check if we have enough GPS satellites and increase the gps noise scaler if we don't
|
|
if (gps.num_sats() >= 6 && (PV_AidingMode == AID_ABSOLUTE)) {
|
|
gpsNoiseScaler = 1.0f;
|
|
} else if (gps.num_sats() == 5 && (PV_AidingMode == AID_ABSOLUTE)) {
|
|
gpsNoiseScaler = 1.4f;
|
|
} else { // <= 4 satellites or in constant position mode
|
|
gpsNoiseScaler = 2.0f;
|
|
}
|
|
|
|
// Check if GPS can output vertical velocity, if it is allowed to be used, and set GPS fusion mode accordingly
|
|
if (gps.have_vertical_velocity() && frontend->_fusionModeGPS == 0) {
|
|
useGpsVertVel = true;
|
|
} else {
|
|
useGpsVertVel = false;
|
|
}
|
|
|
|
// Monitor quality of the GPS velocity data both before and after alignment. This updates
|
|
// GpsGoodToAlign class variable
|
|
calcGpsGoodToAlign();
|
|
|
|
// Post-alignment checks
|
|
calcGpsGoodForFlight();
|
|
|
|
// see if we can get origin from frontend
|
|
if (!validOrigin && frontend->common_origin_valid) {
|
|
|
|
if (!setOrigin(frontend->common_EKF_origin)) {
|
|
// set an error as an attempt was made to set the origin more than once
|
|
INTERNAL_ERROR(AP_InternalError::error_t::flow_of_control);
|
|
return;
|
|
}
|
|
|
|
}
|
|
|
|
// Read the GPS location in WGS-84 lat,long,height coordinates
|
|
const struct Location &gpsloc = gps.location();
|
|
|
|
// Set the EKF origin and magnetic field declination if not previously set and GPS checks have passed
|
|
if (gpsGoodToAlign && !validOrigin) {
|
|
Location gpsloc_fieldelevation = gpsloc;
|
|
// if flying, correct for height change from takeoff so that the origin is at field elevation
|
|
if (inFlight) {
|
|
gpsloc_fieldelevation.alt += (int32_t)(100.0f * stateStruct.position.z);
|
|
}
|
|
|
|
if (!setOrigin(gpsloc_fieldelevation)) {
|
|
// set an error as an attempt was made to set the origin more than once
|
|
INTERNAL_ERROR(AP_InternalError::error_t::flow_of_control);
|
|
return;
|
|
}
|
|
|
|
// set the NE earth magnetic field states using the published declination
|
|
// and set the corresponding variances and covariances
|
|
alignMagStateDeclination();
|
|
|
|
// Set the height of the NED origin
|
|
ekfGpsRefHgt = (double)0.01 * (double)gpsloc.alt + (double)outputDataNew.position.z;
|
|
|
|
// Set the uncertainty of the GPS origin height
|
|
ekfOriginHgtVar = sq(gpsHgtAccuracy);
|
|
|
|
}
|
|
|
|
if (gpsGoodToAlign && !have_table_earth_field) {
|
|
const auto &compass = dal.compass();
|
|
if (compass.have_scale_factor(magSelectIndex) &&
|
|
compass.auto_declination_enabled()) {
|
|
table_earth_field_ga = AP_Declination::get_earth_field_ga(gpsloc).toftype();
|
|
table_declination = radians(AP_Declination::get_declination(gpsloc.lat*1.0e-7,
|
|
gpsloc.lng*1.0e-7));
|
|
have_table_earth_field = true;
|
|
if (frontend->_mag_ef_limit > 0) {
|
|
// initialise earth field from tables
|
|
stateStruct.earth_magfield = table_earth_field_ga;
|
|
}
|
|
}
|
|
}
|
|
|
|
// convert GPS measurements to local NED and save to buffer to be fused later if we have a valid origin
|
|
if (validOrigin) {
|
|
gpsDataNew.pos = EKF_origin.get_distance_NE_ftype(gpsloc);
|
|
if ((frontend->_originHgtMode & (1<<2)) == 0) {
|
|
gpsDataNew.hgt = (float)((double)0.01 * (double)gpsloc.alt - ekfGpsRefHgt);
|
|
} else {
|
|
gpsDataNew.hgt = 0.01 * (gpsloc.alt - EKF_origin.alt);
|
|
}
|
|
storedGPS.push(gpsDataNew);
|
|
// declare GPS available for use
|
|
gpsNotAvailable = false;
|
|
}
|
|
|
|
} else {
|
|
// report GPS fix status
|
|
gpsCheckStatus.bad_fix = true;
|
|
dal.snprintf(prearm_fail_string, sizeof(prearm_fail_string), "Waiting for 3D fix");
|
|
}
|
|
}
|
|
}
|
|
|
|
// read the delta angle and corresponding time interval from the IMU
|
|
// return false if data is not available
|
|
bool NavEKF2_core::readDeltaAngle(uint8_t ins_index, Vector3F &dAng, ftype &dAng_dt) {
|
|
const auto &ins = dal.ins();
|
|
|
|
if (ins_index < ins.get_gyro_count()) {
|
|
Vector3f dAngF;
|
|
float dAng_dtF;
|
|
ins.get_delta_angle(ins_index, dAngF, dAng_dtF);
|
|
dAng = dAngF.toftype();
|
|
dAng_dt = dAng_dtF;
|
|
dAng_dt = MAX(dAng_dt,1.0e-4f);
|
|
dAng_dt = MIN(dAng_dt,1.0e-1f);
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
|
|
/********************************************************
|
|
* Height Measurements *
|
|
********************************************************/
|
|
|
|
// check for new pressure altitude measurement data and update stored measurement if available
|
|
void NavEKF2_core::readBaroData()
|
|
{
|
|
// check to see if baro measurement has changed so we know if a new measurement has arrived
|
|
// do not accept data at a faster rate than 14Hz to avoid overflowing the FIFO buffer
|
|
const auto &baro = dal.baro();
|
|
if (baro.get_last_update() - lastBaroReceived_ms > 70) {
|
|
|
|
baroDataNew.hgt = baro.get_altitude();
|
|
|
|
// If we are in takeoff mode, the height measurement is limited to be no less than the measurement at start of takeoff
|
|
// This prevents negative baro disturbances due to copter downwash corrupting the EKF altitude during initial ascent
|
|
if (dal.get_takeoff_expected() && !assume_zero_sideslip()) {
|
|
baroDataNew.hgt = MAX(baroDataNew.hgt, meaHgtAtTakeOff);
|
|
}
|
|
|
|
// time stamp used to check for new measurement
|
|
lastBaroReceived_ms = baro.get_last_update();
|
|
|
|
// estimate of time height measurement was taken, allowing for delays
|
|
baroDataNew.time_ms = lastBaroReceived_ms - frontend->_hgtDelay_ms;
|
|
|
|
// Correct for the average intersampling delay due to the filter updaterate
|
|
baroDataNew.time_ms -= localFilterTimeStep_ms/2;
|
|
|
|
// Prevent time delay exceeding age of oldest IMU data in the buffer
|
|
baroDataNew.time_ms = MAX(baroDataNew.time_ms,imuDataDelayed.time_ms);
|
|
|
|
// save baro measurement to buffer to be fused later
|
|
storedBaro.push(baroDataNew);
|
|
}
|
|
}
|
|
|
|
// calculate filtered offset between baro height measurement and EKF height estimate
|
|
// offset should be subtracted from baro measurement to match filter estimate
|
|
// offset is used to enable reversion to baro from alternate height data source
|
|
void NavEKF2_core::calcFiltBaroOffset()
|
|
{
|
|
// Apply a first order LPF with spike protection
|
|
baroHgtOffset += 0.1f * constrain_ftype(baroDataDelayed.hgt + stateStruct.position.z - baroHgtOffset, -5.0f, 5.0f);
|
|
}
|
|
|
|
// correct the height of the EKF origin to be consistent with GPS Data using a Bayes filter.
|
|
void NavEKF2_core::correctEkfOriginHeight()
|
|
{
|
|
// Estimate the WGS-84 height of the EKF's origin using a Bayes filter
|
|
|
|
// calculate the variance of our a-priori estimate of the ekf origin height
|
|
ftype deltaTime = constrain_ftype(0.001f * (imuDataDelayed.time_ms - lastOriginHgtTime_ms), 0.0f, 1.0f);
|
|
if (activeHgtSource == HGT_SOURCE_BARO) {
|
|
// Use the baro drift rate
|
|
const ftype baroDriftRate = 0.05f;
|
|
ekfOriginHgtVar += sq(baroDriftRate * deltaTime);
|
|
} else if (activeHgtSource == HGT_SOURCE_RNG) {
|
|
// use the worse case expected terrain gradient and vehicle horizontal speed
|
|
const ftype maxTerrGrad = 0.25f;
|
|
ekfOriginHgtVar += sq(maxTerrGrad * stateStruct.velocity.xy().length() * deltaTime);
|
|
} else {
|
|
// by definition our height source is absolute so cannot run this filter
|
|
return;
|
|
}
|
|
lastOriginHgtTime_ms = imuDataDelayed.time_ms;
|
|
|
|
// calculate the observation variance assuming EKF error relative to datum is independent of GPS observation error
|
|
// when not using GPS as height source
|
|
ftype originHgtObsVar = sq(gpsHgtAccuracy) + P[8][8];
|
|
|
|
// calculate the correction gain
|
|
ftype gain = ekfOriginHgtVar / (ekfOriginHgtVar + originHgtObsVar);
|
|
|
|
// calculate the innovation
|
|
ftype innovation = - stateStruct.position.z - gpsDataDelayed.hgt;
|
|
|
|
// check the innovation variance ratio
|
|
ftype ratio = sq(innovation) / (ekfOriginHgtVar + originHgtObsVar);
|
|
|
|
// correct the EKF origin and variance estimate if the innovation is less than 5-sigma
|
|
if (ratio < 25.0f && gpsAccuracyGood) {
|
|
ekfGpsRefHgt -= (double)(gain * innovation);
|
|
ekfOriginHgtVar -= MAX(gain * ekfOriginHgtVar , 0.0f);
|
|
}
|
|
}
|
|
|
|
/********************************************************
|
|
* Air Speed Measurements *
|
|
********************************************************/
|
|
|
|
// check for new airspeed data and update stored measurements if available
|
|
void NavEKF2_core::readAirSpdData()
|
|
{
|
|
// if airspeed reading is valid and is set by the user to be used and has been updated then
|
|
// we take a new reading, convert from EAS to TAS and set the flag letting other functions
|
|
// know a new measurement is available
|
|
const auto *aspeed = dal.airspeed();
|
|
if (aspeed &&
|
|
aspeed->use() &&
|
|
aspeed->healthy() &&
|
|
aspeed->last_update_ms() != timeTasReceived_ms) {
|
|
tasDataNew.tas = aspeed->get_airspeed() * dal.get_EAS2TAS();
|
|
timeTasReceived_ms = aspeed->last_update_ms();
|
|
tasDataNew.time_ms = timeTasReceived_ms - frontend->tasDelay_ms;
|
|
|
|
// Correct for the average intersampling delay due to the filter update rate
|
|
tasDataNew.time_ms -= localFilterTimeStep_ms/2;
|
|
|
|
// Save data into the buffer to be fused when the fusion time horizon catches up with it
|
|
storedTAS.push(tasDataNew);
|
|
}
|
|
// Check the buffer for measurements that have been overtaken by the fusion time horizon and need to be fused
|
|
tasDataToFuse = storedTAS.recall(tasDataDelayed,imuDataDelayed.time_ms);
|
|
}
|
|
|
|
/********************************************************
|
|
* Range Beacon Measurements *
|
|
********************************************************/
|
|
|
|
#if AP_BEACON_ENABLED
|
|
// check for new range beacon data and push to data buffer if available
|
|
void NavEKF2_core::readRngBcnData()
|
|
{
|
|
// get the location of the beacon data
|
|
const auto *beacon = dal.beacon();
|
|
|
|
// exit immediately if no beacon object
|
|
if (beacon == nullptr) {
|
|
return;
|
|
}
|
|
|
|
// get the number of beacons in use
|
|
N_beacons = beacon->count();
|
|
|
|
// search through all the beacons for new data and if we find it stop searching and push the data into the observation buffer
|
|
bool newDataToPush = false;
|
|
uint8_t numRngBcnsChecked = 0;
|
|
// start the search one index up from where we left it last time
|
|
uint8_t index = lastRngBcnChecked;
|
|
while (!newDataToPush && numRngBcnsChecked < N_beacons) {
|
|
// track the number of beacons checked
|
|
numRngBcnsChecked++;
|
|
|
|
// move to next beacon, wrap index if necessary
|
|
index++;
|
|
if (index >= N_beacons) {
|
|
index = 0;
|
|
}
|
|
|
|
// check that the beacon is healthy and has new data
|
|
if (beacon->beacon_healthy(index) &&
|
|
beacon->beacon_last_update_ms(index) != lastTimeRngBcn_ms[index])
|
|
{
|
|
// set the timestamp, correcting for measurement delay and average intersampling delay due to the filter update rate
|
|
lastTimeRngBcn_ms[index] = beacon->beacon_last_update_ms(index);
|
|
rngBcnDataNew.time_ms = lastTimeRngBcn_ms[index] - frontend->_rngBcnDelay_ms - localFilterTimeStep_ms/2;
|
|
|
|
// set the range noise
|
|
// TODO the range library should provide the noise/accuracy estimate for each beacon
|
|
rngBcnDataNew.rngErr = frontend->_rngBcnNoise;
|
|
|
|
// set the range measurement
|
|
rngBcnDataNew.rng = beacon->beacon_distance(index);
|
|
|
|
// set the beacon position
|
|
rngBcnDataNew.beacon_posNED = beacon->beacon_position(index).toftype();
|
|
|
|
// identify the beacon identifier
|
|
rngBcnDataNew.beacon_ID = index;
|
|
|
|
// indicate we have new data to push to the buffer
|
|
newDataToPush = true;
|
|
|
|
// update the last checked index
|
|
lastRngBcnChecked = index;
|
|
}
|
|
}
|
|
|
|
// Check if the beacon system has returned a 3D fix
|
|
Vector3f beaconVehiclePosNEDF;
|
|
float beaconVehiclePosErrF;
|
|
if (beacon->get_vehicle_position_ned(beaconVehiclePosNEDF, beaconVehiclePosErrF)) {
|
|
rngBcnLast3DmeasTime_ms = imuSampleTime_ms;
|
|
}
|
|
beaconVehiclePosNED = beaconVehiclePosNEDF.toftype();
|
|
beaconVehiclePosErr = beaconVehiclePosErrF;
|
|
|
|
|
|
// Check if the range beacon data can be used to align the vehicle position
|
|
if (imuSampleTime_ms - rngBcnLast3DmeasTime_ms < 250 && beaconVehiclePosErr < 1.0f && rngBcnAlignmentCompleted) {
|
|
// check for consistency between the position reported by the beacon and the position from the 3-State alignment filter
|
|
ftype posDiffSq = sq(receiverPos.x - beaconVehiclePosNED.x) + sq(receiverPos.y - beaconVehiclePosNED.y);
|
|
ftype posDiffVar = sq(beaconVehiclePosErr) + receiverPosCov[0][0] + receiverPosCov[1][1];
|
|
if (posDiffSq < 9.0f*posDiffVar) {
|
|
rngBcnGoodToAlign = true;
|
|
// Set the EKF origin and magnetic field declination if not previously set
|
|
if (!validOrigin && PV_AidingMode != AID_ABSOLUTE) {
|
|
// get origin from beacon system
|
|
Location origin_loc;
|
|
if (beacon->get_origin(origin_loc)) {
|
|
setOriginLLH(origin_loc);
|
|
|
|
// set the NE earth magnetic field states using the published declination
|
|
// and set the corresponding variances and covariances
|
|
alignMagStateDeclination();
|
|
|
|
// Set the uncertainty of the origin height
|
|
ekfOriginHgtVar = sq(beaconVehiclePosErr);
|
|
}
|
|
}
|
|
} else {
|
|
rngBcnGoodToAlign = false;
|
|
}
|
|
} else {
|
|
rngBcnGoodToAlign = false;
|
|
}
|
|
|
|
// Save data into the buffer to be fused when the fusion time horizon catches up with it
|
|
if (newDataToPush) {
|
|
storedRangeBeacon.push(rngBcnDataNew);
|
|
}
|
|
|
|
// Check the buffer for measurements that have been overtaken by the fusion time horizon and need to be fused
|
|
rngBcnDataToFuse = storedRangeBeacon.recall(rngBcnDataDelayed,imuDataDelayed.time_ms);
|
|
|
|
}
|
|
#endif // AP_BEACON_ENABLED
|
|
|
|
/*
|
|
update timing statistics structure
|
|
*/
|
|
void NavEKF2_core::updateTimingStatistics(void)
|
|
{
|
|
if (timing.count == 0) {
|
|
timing.dtIMUavg_max = dtIMUavg;
|
|
timing.dtIMUavg_min = dtIMUavg;
|
|
timing.dtEKFavg_max = dtEkfAvg;
|
|
timing.dtEKFavg_min = dtEkfAvg;
|
|
timing.delAngDT_max = imuDataDelayed.delAngDT;
|
|
timing.delAngDT_min = imuDataDelayed.delAngDT;
|
|
timing.delVelDT_max = imuDataDelayed.delVelDT;
|
|
timing.delVelDT_min = imuDataDelayed.delVelDT;
|
|
} else {
|
|
timing.dtIMUavg_max = MAX(timing.dtIMUavg_max, dtIMUavg);
|
|
timing.dtIMUavg_min = MIN(timing.dtIMUavg_min, dtIMUavg);
|
|
timing.dtEKFavg_max = MAX(timing.dtEKFavg_max, dtEkfAvg);
|
|
timing.dtEKFavg_min = MIN(timing.dtEKFavg_min, dtEkfAvg);
|
|
timing.delAngDT_max = MAX(timing.delAngDT_max, imuDataDelayed.delAngDT);
|
|
timing.delAngDT_min = MIN(timing.delAngDT_min, imuDataDelayed.delAngDT);
|
|
timing.delVelDT_max = MAX(timing.delVelDT_max, imuDataDelayed.delVelDT);
|
|
timing.delVelDT_min = MIN(timing.delVelDT_min, imuDataDelayed.delVelDT);
|
|
}
|
|
timing.count++;
|
|
}
|
|
|
|
void NavEKF2_core::writeExtNavData(const Vector3f &pos, const Quaternion &quat, float posErr, float angErr, uint32_t timeStamp_ms, uint16_t delay_ms, uint32_t resetTime_ms)
|
|
{
|
|
// protect against NaN
|
|
if (pos.is_nan() || isnan(posErr) || quat.is_nan() || isnan(angErr)) {
|
|
return;
|
|
}
|
|
|
|
// limit update rate to maximum allowed by sensor buffers and fusion process
|
|
// don't try to write to buffer until the filter has been initialised
|
|
if ((timeStamp_ms - extNavMeasTime_ms) < 20) {
|
|
return;
|
|
} else {
|
|
extNavMeasTime_ms = timeStamp_ms;
|
|
}
|
|
|
|
if (resetTime_ms != extNavLastPosResetTime_ms) {
|
|
extNavDataNew.posReset = true;
|
|
extNavLastPosResetTime_ms = resetTime_ms;
|
|
} else {
|
|
extNavDataNew.posReset = false;
|
|
}
|
|
|
|
extNavDataNew.pos = pos.toftype();
|
|
extNavDataNew.quat = quat.toftype();
|
|
extNavDataNew.posErr = posErr;
|
|
extNavDataNew.angErr = angErr;
|
|
timeStamp_ms = timeStamp_ms - delay_ms;
|
|
// Correct for the average intersampling delay due to the filter updaterate
|
|
timeStamp_ms -= localFilterTimeStep_ms/2;
|
|
// Prevent time delay exceeding age of oldest IMU data in the buffer
|
|
timeStamp_ms = MAX(timeStamp_ms,imuDataDelayed.time_ms);
|
|
extNavDataNew.time_ms = timeStamp_ms;
|
|
|
|
storedExtNav.push(extNavDataNew);
|
|
}
|
|
|
|
/*
|
|
return declination in radians
|
|
*/
|
|
ftype NavEKF2_core::MagDeclination(void) const
|
|
{
|
|
// if we are using the WMM tables then use the table declination
|
|
// to ensure consistency with the table mag field. Otherwise use
|
|
// the declination from the compass library
|
|
if (have_table_earth_field && frontend->_mag_ef_limit > 0) {
|
|
return table_declination;
|
|
}
|
|
if (!use_compass()) {
|
|
return 0;
|
|
}
|
|
return dal.compass().get_declination();
|
|
}
|
|
|
|
/*
|
|
update estimates of inactive bias states. This keeps inactive IMUs
|
|
as hot-spares so we can switch to them without causing a jump in the
|
|
error
|
|
*/
|
|
void NavEKF2_core::learnInactiveBiases(void)
|
|
{
|
|
#if INS_MAX_INSTANCES == 1
|
|
inactiveBias[0].gyro_bias = stateStruct.gyro_bias;
|
|
inactiveBias[0].gyro_scale = stateStruct.gyro_scale;
|
|
inactiveBias[0].accel_zbias = stateStruct.accel_zbias;
|
|
#else
|
|
const auto &ins = dal.ins();
|
|
|
|
// learn gyro biases
|
|
for (uint8_t i=0; i<INS_MAX_INSTANCES; i++) {
|
|
if (!ins.use_gyro(i)) {
|
|
// can't use this gyro
|
|
continue;
|
|
}
|
|
if (gyro_index_active == i) {
|
|
// use current estimates from main filter of gyro bias and scale
|
|
inactiveBias[i].gyro_bias = stateStruct.gyro_bias;
|
|
inactiveBias[i].gyro_scale = stateStruct.gyro_scale;
|
|
} else {
|
|
// get filtered gyro and use the difference between the
|
|
// corrected gyro on the active IMU and the inactive IMU
|
|
// to move the inactive bias towards the right value
|
|
Vector3F filtered_gyro_active = ins.get_gyro(gyro_index_active).toftype() - (stateStruct.gyro_bias/dtEkfAvg);
|
|
Vector3F filtered_gyro_inactive = ins.get_gyro(i).toftype() - (inactiveBias[i].gyro_bias/dtEkfAvg);
|
|
Vector3F error = filtered_gyro_active - filtered_gyro_inactive;
|
|
|
|
// prevent a single large error from contaminating bias estimate
|
|
const ftype bias_limit = radians(5);
|
|
error.x = constrain_ftype(error.x, -bias_limit, bias_limit);
|
|
error.y = constrain_ftype(error.y, -bias_limit, bias_limit);
|
|
error.z = constrain_ftype(error.z, -bias_limit, bias_limit);
|
|
|
|
// slowly bring the inactive gyro in line with the active gyro. This corrects a 5 deg/sec
|
|
// gyro bias error in around 1 minute
|
|
inactiveBias[i].gyro_bias -= error * (1.0e-4f * dtEkfAvg);
|
|
}
|
|
}
|
|
|
|
// learn accel biases
|
|
for (uint8_t i=0; i<INS_MAX_INSTANCES; i++) {
|
|
if (!ins.use_accel(i)) {
|
|
// can't use this accel
|
|
continue;
|
|
}
|
|
if (accel_index_active == i) {
|
|
// use current estimate from main filter
|
|
inactiveBias[i].accel_zbias = stateStruct.accel_zbias;
|
|
} else {
|
|
// get filtered accel and use the difference between the
|
|
// corrected accel on the active IMU and the inactive IMU
|
|
// to move the inactive bias towards the right value
|
|
ftype filtered_accel_active = ins.get_accel(accel_index_active).z - (stateStruct.accel_zbias/dtEkfAvg);
|
|
ftype filtered_accel_inactive = ins.get_accel(i).z - (inactiveBias[i].accel_zbias/dtEkfAvg);
|
|
ftype error = filtered_accel_active - filtered_accel_inactive;
|
|
|
|
// prevent a single large error from contaminating bias estimate
|
|
const ftype bias_limit = 1; // m/s/s
|
|
error = constrain_ftype(error, -bias_limit, bias_limit);
|
|
|
|
// slowly bring the inactive accel in line with the active accel
|
|
// this learns 0.5m/s/s bias in about 1 minute
|
|
inactiveBias[i].accel_zbias -= error * (1.0e-4f * dtEkfAvg);
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
// Writes the default equivalent airspeed in m/s to be used in forward flight if a measured airspeed is required and not available.
|
|
void NavEKF2_core::writeDefaultAirSpeed(float airspeed)
|
|
{
|
|
defaultAirSpeed = airspeed;
|
|
}
|
|
|
|
void NavEKF2_core::writeExtNavVelData(const Vector3f &vel, float err, uint32_t timeStamp_ms, uint16_t delay_ms)
|
|
{
|
|
// protect against NaN
|
|
if (vel.is_nan() || isnan(err)) {
|
|
return;
|
|
}
|
|
|
|
if ((timeStamp_ms - extNavVelMeasTime_ms) < 20) {
|
|
return;
|
|
}
|
|
|
|
extNavVelMeasTime_ms = timeStamp_ms;
|
|
useExtNavVel = true;
|
|
extNavVelNew.vel = vel.toftype();
|
|
extNavVelNew.err = err;
|
|
timeStamp_ms = timeStamp_ms - delay_ms;
|
|
// Correct for the average intersampling delay due to the filter updaterate
|
|
timeStamp_ms -= localFilterTimeStep_ms/2;
|
|
// Prevent time delay exceeding age of oldest IMU data in the buffer
|
|
timeStamp_ms = MAX(timeStamp_ms,imuDataDelayed.time_ms);
|
|
extNavVelNew.time_ms = timeStamp_ms;
|
|
storedExtNavVel.push(extNavVelNew);
|
|
}
|