..
AC_AttitudeControl
AC_PosControl_Sub: do not reset accel_z integrator when relaxing
2019-12-02 13:26:27 -05:00
AC_Autorotation
AC_Autorotation: Created autorotation library
2019-11-29 08:06:10 +08:00
AC_AutoTune
AC_AutoTune: cope with change in namespace of LogEvent enum
2019-11-05 08:19:26 +08:00
AC_Avoidance
AC_Avoid: adjust for proximity status namespace change
2019-10-31 11:58:15 +08:00
AC_Fence
AC_Fence: relax sys-status healthy reporting
2019-11-11 07:55:50 +08:00
AC_InputManager
AC_PID
AC_PID: added AC_PI controller
2019-11-02 16:31:04 +11:00
AC_PrecLand
AC_PrecLand: pass mavlink_message_t by const reference
2019-07-16 20:51:42 +10:00
AC_Sprayer
AC_Sprayer: use enum-class for SRV_CHANNEL_LIMIT_TRIM and friends
2019-11-26 10:17:17 +11:00
AC_WPNav
AC_WPNav: do not calculate NEU vector from invalid location
2019-09-17 09:05:23 +09:00
AP_AccelCal
AP_AccelCal: adjust for new vehicle base class
2019-10-08 11:26:04 +11:00
AP_ADC
AP_ADC: remove keywords.txt
2019-02-17 22:19:08 +11:00
AP_ADSB
AP_ADSB: added handle_adsb_vehicle() API
2019-10-16 13:13:24 +11:00
AP_AdvancedFailsafe
AP_AdvancedFailSafe: add singleton getter
2019-09-17 09:13:43 +10:00
AP_AHRS
AP_AHRS: force the use of EKF for Copter and Sub
2019-12-02 09:16:22 +11:00
AP_Airspeed
AP_Airspeed: switched to recursive semaphore
2019-11-10 18:50:08 +11:00
AP_Arming
AP_Arming: add pre-arm system check that scripting init succeeded
2019-12-03 12:48:32 +08:00
AP_Avoidance
AP_Avoidance: reorder avoiding and sending GCS notification
2019-11-12 13:48:09 +11:00
AP_Baro
AP_Baro: add driver for the SPL06-001
2019-11-24 16:47:31 -08:00
AP_BattMonitor
AP_BattMonitor: use corrected version of send_to_components
2019-11-26 12:10:12 +11:00
AP_Beacon
AP_Beacon: Common modbus crc method
2019-07-12 15:33:21 +10:00
AP_BLHeli
AP_BLHeli: log motor temp as zero
2019-11-26 11:56:33 +11:00
AP_BoardConfig
AP_BoardConfig: fixed debug code
2019-11-20 21:20:32 +11:00
AP_Button
AP_Button: use send_to_active_channels()
2019-06-06 12:41:48 +10:00
AP_Camera
AP_Camera: use corrected version of send_to_components
2019-11-26 12:10:12 +11:00
AP_Common
AP_Common: remove is-zero checks for Location::offset
2019-11-19 10:49:19 +11:00
AP_Compass
AP_Compass: minor comment fix
2019-11-26 11:10:06 +11:00
AP_Declination
AP_Declination: added get_earth_field_ga() interface
2019-06-03 12:21:29 +10:00
AP_Devo_Telem
AP_Devo_Telem: add floating point constant designators
2019-04-05 23:04:17 -07:00
AP_EFI
AP_EFI: Add AP_EFI Library
2019-11-17 20:10:54 +11:00
AP_Filesystem
AP_Filesystem: make unlink do both directories and files on posix
2019-11-02 22:52:06 +11:00
AP_FlashStorage
AP_FlashStorage: correct format-string warnings
2019-11-05 11:29:08 +11:00
AP_Follow
AP_Follow: add clear_offsets_if_required method
2019-10-07 08:30:45 +09:00
AP_Frsky_Telem
Ap_Frsky_Telem: replaced the passthrough scheduler with a WFQ one.
2019-10-29 10:27:17 +11:00
AP_GPS
AP_GPS: Log SBF commanded disarms
2019-11-20 11:06:16 -07:00
AP_Gripper
AP_Gripper: log event when gripper grabbed or released
2019-11-05 08:19:26 +08:00
AP_HAL
AP_HAL: stop emitting extra CR before a LF as part of our printf
2019-11-08 17:37:04 +11:00
AP_HAL_ChibiOS
HAL_ChibiOS: lower gains on CubyOrange and Yellow heater
2019-11-28 21:35:29 +11:00
AP_HAL_Empty
AP_HAL_Empty: Remove set_stop_pin from AnalogSource
2019-09-04 09:54:50 +10:00
AP_HAL_Linux
HAL_Linux: disable input modifications on serial interface for rc receiver
2019-11-13 09:02:30 -08:00
AP_HAL_SITL
AP_HAL_SITL: set cloexec on eeprom.bin
2019-12-02 19:06:34 +11:00
AP_ICEngine
AP_ICEngine: added idle governor
2019-11-17 20:10:54 +11:00
AP_InertialNav
AP_InertialNav: use ekf::get_vert_pos_rate during high vibration
2019-10-18 11:15:25 +09:00
AP_InertialSensor
AP_InertialSensor: slight improvement to LOG_BAT_OPT docs.
2019-12-01 12:19:46 +11:00
AP_InternalError
AP_InternalError: add a general should-not-be-here bit
2019-09-28 07:58:48 +09:00
AP_IOMCU
AP_IOMCU: Ensure IOMCU does not log if there is no logger
2019-11-20 11:46:34 +11:00
AP_IRLock
AP_IRLock: removed unusued AP_Common/Semaphore.h
2019-05-15 15:33:48 +10:00
AP_JSButton
AP_KDECAN
AP_KDECAN: log motor temp as zero
2019-11-26 11:56:33 +11:00
AP_L1_Control
AP_L1_Control: wrap_180_cd no longer solely returns floats
2019-09-18 12:57:02 +10:00
AP_Landing
AP_Landing: Directly include needed headers
2019-08-28 13:13:03 +10:00
AP_LandingGear
AP_Landing: emit DEPLOY gcs text only if not already deployed
2019-12-02 07:28:53 +08:00
AP_LeakDetector
AP_LeakDetector: Mark Leak pins RebootRequired
2019-09-09 09:53:28 -07:00
AP_Logger
AP_Logger: ESC logging includes motor temperature
2019-11-26 11:56:33 +11:00
AP_LTM_Telem
AP_LTM_Telem: LTM telemetry support
2019-11-26 12:14:13 +11:00
AP_Math
AP_Math: added smaller footprint crc32
2019-10-28 15:53:16 +11:00
AP_Menu
AP_Menu: use strtof() instead of atof()
2019-10-28 15:53:16 +11:00
AP_Mission
AP_Mission: add sanity check that 16-bit commands aren't stored_in_location
2019-10-18 15:16:21 +11:00
AP_Module
AP_Module: update example baro include
2019-06-27 14:56:21 +10:00
AP_Motors
AP_Motors: Added support for autorotation
2019-11-29 08:06:10 +08:00
AP_Mount
AP_Mount: change type of roi_target_set to boolean
2019-11-12 07:52:22 +08:00
AP_NavEKF
AP_NavEKF: fixed build with vector index checking
2019-10-01 15:39:03 +10:00
AP_NavEKF2
AP_NavEKF2: clean up init failure handling
2019-11-26 11:59:10 +11:00
AP_NavEKF3
AP_NavEKF3: adjust for renaming of RangeFinder files
2019-11-12 07:14:37 +08:00
AP_Navigation
AP_NMEA_Output
AP_NMEA_Output: 10hz rate limiting uses uint32_t
2019-11-29 12:28:51 +08:00
AP_Notify
AP_Notify: implement SITL serial LEDs
2019-11-04 13:01:59 +11:00
AP_OpticalFlow
AP_OpticalFlow: pass mavlink_message_t by const reference
2019-07-16 20:51:42 +10:00
AP_OSD
AP_OSD: fixes for modified AP_ROMFS API
2019-10-24 22:03:43 +11:00
AP_Parachute
AP_Parachute: cope with change in namespace of LogEvent enum
2019-11-05 08:19:26 +08:00
AP_Param
AP_Param: rename sensor_config_error to config_error
2019-11-08 10:14:34 +11:00
AP_Proximity
AP_Proximity: new lightware SF40C driver
2019-11-15 12:25:53 +08:00
AP_Radio
AP_Radio: expect delay whil resetting radios
2019-11-27 22:35:15 +11:00
AP_Rally
AP_Rally: adjust to allow for uploading via the mission item protocol
2019-05-22 08:53:45 +10:00
AP_RAMTRON
AP_RAMTRON: removed unusued AP_Common/Semaphore.h
2019-05-15 15:33:48 +10:00
AP_RangeFinder
AP_RangeFinder: remove param conversion for 3rd and 4th
2019-12-03 13:06:10 +08:00
AP_RCMapper
AP_RCMapper: Fix sub only documentation on channels
2019-07-23 09:29:48 +10:00
AP_RCProtocol
AP_RCProtocol: remove duplicated definition from protocol_detected
2019-10-31 08:24:30 +11:00
AP_Relay
AP_Relay: change parameter name from relay to instance
2019-09-27 12:02:38 +10:00
AP_RobotisServo
AP_RobotisServo: fix includes place and order
2019-03-26 10:27:54 +11:00
AP_ROMFS
AP_ROMFS: fixed return size for uncompressed ROMFS
2019-10-25 21:36:55 +11:00
AP_RPM
AP_RPM: added EFI backend
2019-11-17 20:10:54 +11:00
AP_RSSI
AP_RSSI: resolve gcs::send_text compiler warning
2019-07-30 09:02:39 +09:00
AP_RTC
AP_RTC: add local time support
2019-10-07 19:55:42 +11:00
AP_SBusOut
AP_SBusOut: fix includes place and order
2019-03-26 10:27:54 +11:00
AP_Scheduler
AP_Scheduler: use fill_nanf() on each scheduler function
2019-10-01 17:35:26 +10:00
AP_Scripting
AP_Scripting: init sends failure message
2019-12-03 12:48:32 +08:00
AP_SerialLED
AP_SerialLED: check for valid channel
2019-11-04 13:06:08 +11:00
AP_SerialManager
AP_SerialManager: expose map_baudrate()
2019-11-27 14:12:37 +11:00
AP_ServoRelayEvents
AP_ServoRelayEvents: use Relay singleton
2019-07-03 23:59:24 -07:00
AP_SmartRTL
AP_SmartRTL: fixup compile error
2019-10-04 10:01:49 +09:00
AP_Soaring
AP_Soaring: move include of logger to .cpp file
2019-07-09 10:57:20 +10:00
AP_SpdHgtControl
AP_SpdHgtControl: remove unused includes
2019-07-09 10:57:20 +10:00
AP_Stats
AP_Stats: Improve reset documentation (NFC)
2019-02-28 09:20:10 +09:00
AP_TECS
AP_TECS: removed TECS_LAND_PMIN
2019-11-19 07:50:40 +11:00
AP_TempCalibration
AP_TempCalibration: Include needed AP_Baro.h
2019-06-27 14:56:21 +10:00
AP_TemperatureSensor
AP_TemperatureSensor: Update TSYS01 for Pixhawk2
2019-09-27 13:08:26 -07:00
AP_Terrain
AP_Terrain: leave ENABLE as 1 if memory alloc fails
2019-11-19 10:16:25 +11:00
AP_ToshibaCAN
AP_ToshibaCAN: consume and log motor temperature
2019-11-26 11:56:33 +11:00
AP_Tuning
AP_Tuning: tidy includes
2019-07-09 10:57:20 +10:00
AP_UAVCAN
AP_UAVCAN: support RTCMStream for RTCM injection
2019-11-09 17:11:32 +11:00
AP_Vehicle
AP_Vehicle: instantiate the AHRS object
2019-12-02 09:16:22 +11:00
AP_VisualOdom
AP_VisualOdom: Directly include needed headers
2019-08-28 13:13:03 +10:00
AP_Volz_Protocol
AP_Volz_Protocol: fixed build warnings
2018-10-17 12:54:22 +11:00
AP_WheelEncoder
AP_WheelEncoder: add SITL backend
2019-10-07 07:31:51 +11:00
AP_Winch
AP_Winch: use enum-class for SRV_CHANNEL_LIMIT_TRIM and friends
2019-11-26 10:17:17 +11:00
AP_WindVane
AP_WindVane: use strtof instead of atof
2019-10-28 15:53:16 +11:00
APM_Control
APM_Control: AR_AttitudeControl: add description for new PID params
2019-09-23 09:45:46 +09:00
AR_WPNav
AR_WPNav: remove unneeded overshoot methods
2019-10-23 08:28:39 +08:00
doc
Filter
Filter: switch harmomic notch mode to enum class
2019-11-19 07:08:01 +08:00
GCS_MAVLink
GCS_MAVLink: use new SERIAL_CONTROL_SERIALn enums
2019-12-01 12:48:23 +11:00
PID
Global: rename desired to target in PID info
2019-07-25 17:38:15 +09:00
RC_Channel
RC_Channel: init aux function cases in alphabetical order
2019-11-12 18:56:13 +11:00
SITL
SITL: increase Wasp reading frequency
2019-12-02 19:07:03 +11:00
SRV_Channel
SRV_Channel: use enum-class for SRV_CHANNEL_LIMIT_TRIM and friends
2019-11-26 10:17:17 +11:00
StorageManager
StorageManager: add storage aread for CAN Dynamic Node Alloc
2019-10-19 09:55:38 +11:00