.. |
APM_Config.h
|
Rover: major restructuring
|
2013-02-08 09:21:22 +11:00 |
APMrover2.pde
|
Rover: release new beta
|
2013-12-02 10:19:50 +11:00 |
GCS.h
|
Rover: added support for uartD
|
2013-11-25 11:21:52 +11:00 |
GCS_Mavlink.pde
|
Rover: log system ID if available
|
2013-11-26 13:00:03 +11:00 |
Log.pde
|
Rover: log system ID if available
|
2013-11-26 13:00:03 +11:00 |
Makefile
|
Rover Makefile: don't include targets.mk directly (included by apm.mk)
|
2013-01-09 13:15:53 -08:00 |
Parameters.h
|
Rover: changed SERIAL3_BAUD to SERIAL1_BAUD
|
2013-11-26 13:00:03 +11:00 |
Parameters.pde
|
Rover: changed SERIAL3_BAUD to SERIAL1_BAUD
|
2013-11-26 13:00:03 +11:00 |
Steering.pde
|
Rover: added basic support for reverse in STEERING mode
|
2013-11-18 10:58:22 +11:00 |
command_description.txt
|
APMrover v2.0 - tested on Traxxas Monster Jam Grinder XL-5 3602
|
2012-04-30 09:17:14 +02:00 |
commands.pde
|
Rover: use L1 controller for navigation
|
2013-09-09 18:04:40 +10:00 |
commands_logic.pde
|
Rover: support MAV_CMD_DO_SET_CAM_TRIGG_DIST
|
2013-10-11 21:42:13 +11:00 |
commands_process.pde
|
Rover: first cut at porting rover to AP_HAL
|
2012-12-20 14:52:34 +11:00 |
compat.h
|
Rover: first cut at porting rover to AP_HAL
|
2012-12-20 14:52:34 +11:00 |
compat.pde
|
Rover: remove some unused functions
|
2013-10-11 21:36:50 +11:00 |
config.h
|
Rover: changed SERIAL3_BAUD to SERIAL1_BAUD
|
2013-11-26 13:00:03 +11:00 |
control_modes.pde
|
Rover: use L1 controller for navigation
|
2013-09-09 18:04:40 +10:00 |
createTags
|
APMrover v2.0 - tested on Traxxas Monster Jam Grinder XL-5 3602
|
2012-04-30 09:17:14 +02:00 |
defines.h
|
Rover: added MAVLink SYSTEM_TIME message
|
2013-10-24 14:22:48 +11:00 |
events.pde
|
Rover: new failsafe logic
|
2013-03-29 10:25:53 +11:00 |
failsafe.pde
|
Rover: removed demo_servos()
|
2013-10-23 09:40:41 +11:00 |
navigation.pde
|
Rover: use L1 controller for navigation
|
2013-09-09 18:04:40 +10:00 |
nocore.inoflag
|
Rover: added nocore.inoflag
|
2012-12-20 14:52:35 +11:00 |
radio.pde
|
Rover: fixed throttle control in reverse
|
2013-11-25 11:21:52 +11:00 |
sensors.pde
|
Rover: integrate BattMonitor
|
2013-10-03 11:16:29 +09:00 |
setup.pde
|
Rover: integrate BattMonitor
|
2013-10-03 11:16:29 +09:00 |
system.pde
|
Rover: changed SERIAL3_BAUD to SERIAL1_BAUD
|
2013-11-26 13:00:03 +11:00 |
test.pde
|
Rover: fixed performance monitoring
|
2013-10-28 17:21:35 +11:00 |