mirror of https://github.com/ArduPilot/ardupilot
474 lines
18 KiB
C
474 lines
18 KiB
C
// ------------------------------------------------------------------------------------------------------------------------------------------------------------
|
|
// ArduPPM Version v0.9.87
|
|
// ------------------------------------------------------------------------------------------------------------------------------------------------------------
|
|
// ARDUCOPTER 2 : PPM ENCODER for AT Mega 328p and APM v1.4 Boards
|
|
// By:John Arne Birkeland - 2011
|
|
//
|
|
// By: Olivier ADLER - 2011 - APM v1.4 adaptation and testing
|
|
//
|
|
// Compiled with Atmel AVR Studio 4.0 / AVR GCC
|
|
// ------------------------------------------------------------------------------------------------------------------------------------------------------------
|
|
|
|
// Changelog //
|
|
//
|
|
// Code based on John Arne PPM v1 encoder. Mux / Led / Failsafe control from Olivier ADLER.
|
|
// Adaptation to APM v1.4 / ATMEGA 328p by Olivier ADLER, with great code base, help and advices from John Arne.
|
|
//
|
|
// 0.9.0 -> 0.9.4 : experimental versions. Not publicly available. Jitter problems, good reliability.
|
|
//
|
|
// New PPM code base V2 from John Arne designed for 32u2 AVRs
|
|
//
|
|
// 0.9.5 : first reliable and jitter free version based on new John PPM V2 code and Olivier interrupt nesting idea.
|
|
// 0.9.6 : enhanced jitter free version with non bloking servo interrupt and ultra fast ppm generator interrupt(John's ideas)
|
|
// 0.9.7 : mux (passthrough mode) switchover reliability enhancements and error reporting improvements.
|
|
// 0.9.75 : implemented ppm_encoder.h library with support for both atmega328p and atmega32u2 chips
|
|
// 0.9.76 : timers 0 and 2 replaced by a delayed loop for simplicity. Timer 0 and 2 are now free for use.
|
|
// reworked error detection with settable time window, errors threshold and Led delay
|
|
// 0.9.77 : Implemented ppm_encoder.h into latest version.
|
|
// 0.9.78 : Implemented optimzed assembly compare interrupt
|
|
// 0.9.79 : Removed Non Blocking attribute for servo input interrupt
|
|
// 0.9.80 : Removed non blocking for compare interrupt, added optionnal jitter filter and optionnal non blocking attribute for assembly version of compare interrupt
|
|
// 0.9.81 : Added PPM PASSTROUGH Mode and LED Codes function to report special modes
|
|
// 0.9.82 : LED codes function simplification
|
|
// 0.9.83 : Implemented PPM passtrough failsafe
|
|
// 0.9.84 : Corrected pin and port names in Encoder-PPM.c according to #define for Mega32U2 compatibility
|
|
// 0.9.85 : Added brownout reset detection flag
|
|
// 0.9.86 : Added a #define to disable Radio Passthrough mode (hardware failsafe for Arduplane)
|
|
// 0.9.87 : #define correction for radio passthrough (was screwed up).
|
|
// ------------------------------------------------------------------------------------------------------------------------------------------------------------
|
|
// PREPROCESSOR DIRECTIVES
|
|
// ------------------------------------------------------------------------------------------------------------------------------------------------------------
|
|
|
|
#include "..\Libraries\PPM_Encoder.h"
|
|
#include <util/delay.h>
|
|
|
|
|
|
#define ERROR_THRESHOLD 2 // Number of servo input errors before alerting
|
|
#define ERROR_DETECTION_WINDOW 3000 * LOOP_TIMER_10MS // Detection window for error detection (default to 30s)
|
|
#define ERROR_CONDITION_DELAY 500 * LOOP_TIMER_10MS // Servo error condition LED delay (LED blinking duration)
|
|
|
|
#define PASSTHROUGH_MODE_ENABLED // Comment this line to remove CH8 radio passthrough mode support (hardware failsafe for Arduplane)
|
|
#define PASSTHROUGH_CHANNEL 8 * 2 // Channel for passthrough mode selection
|
|
#define PASSTHROUGH_CHANNEL_OFF_US ONE_US * 1600 - PPM_PRE_PULSE // Passthrough off threshold
|
|
#define PASSTHROUGH_CHANNEL_ON_US ONE_US * 1800 - PPM_PRE_PULSE // Passthrough on threshold
|
|
|
|
#define THROTTLE_CHANNEL 3 * 2 // Throttle Channel
|
|
#define THROTTLE_CHANNEL_LED_TOGGLE_US ONE_US * 1200 - PPM_PRE_PULSE // Throttle Channel Led toggle threshold
|
|
#define LED_LOW_BLINKING_RATE 125 * LOOP_TIMER_10MS // Led blink rate for low throttle position (half period)
|
|
|
|
// Timers
|
|
|
|
#define TIMER0_10MS 156 // Timer0 ticks for 10 ms duration
|
|
#define TIMER1_10MS 20000 // Timer1 ticks for 10 ms duration
|
|
#define TIMER2_100MS 1562 // Timer2 ticks for 100 ms duration
|
|
#define LOOP_TIMER_10MS 10 // Loop timer ticks for 10 ms duration
|
|
|
|
// LED Code
|
|
|
|
#define SPACE_SHORT_DURATION 40 * LOOP_TIMER_10MS // Space after short symbol
|
|
#define SPACE_LONG_DURATION 75 * LOOP_TIMER_10MS // Space after long symbol
|
|
#define SYMBOL_SHORT_DURATION 20 * LOOP_TIMER_10MS // Short symbol duration
|
|
#define SYMBOL_LONG_DURATION 100 * LOOP_TIMER_10MS // Long symbol duration
|
|
#define INTER_CODE_DURATION 150 * LOOP_TIMER_10MS // Inter code duration
|
|
|
|
#define INTER_CODE 0 // Symbols value for coding
|
|
#define SHORT_SYMBOL 1
|
|
#define LONG_SYMBOL 2
|
|
#define SHORT_SPACE 3
|
|
#define LONG_SPACE 4
|
|
#define LOOP 5
|
|
|
|
|
|
|
|
// ------------------------------------------------------------------------------------------------------------------------------------------------------------
|
|
// PPM ENCODER INIT AND AUXILIARY TASKS
|
|
// ------------------------------------------------------------------------------------------------------------------------------------------------------------
|
|
|
|
int main(void)
|
|
{
|
|
// ------------------------------------------------------------------------------------------------------------------------------------------------------------
|
|
// LOCAL VARIABLES
|
|
// ------------------------------------------------------------------------------------------------------------------------------------------------------------
|
|
bool init = true; // We are inside init sequence
|
|
bool mux_passthrough = false; // Mux passthrough mode status Flag : passthrough is off
|
|
uint16_t led_acceleration; // Led acceleration based on throttle stick position
|
|
bool servo_error_condition = false; // Servo signal error condition
|
|
|
|
static uint16_t servo_error_detection_timer=0; // Servo error detection timer
|
|
static uint16_t servo_error_condition_timer=0; // Servo error condition timer
|
|
static uint16_t blink_led_timer = 0; // Blink led timer
|
|
|
|
#ifdef PASSTHROUGH_MODE_ENABLED
|
|
static uint8_t mux_timer = 0; // Mux timer
|
|
static uint8_t mux_counter = 0; // Mux counter
|
|
static int8_t mux_check = 0;
|
|
static uint16_t mux_ppm = 500;
|
|
#endif
|
|
|
|
static uint16_t led_code_timer = 0; // Blink Code Timer
|
|
static uint8_t led_code_symbol = 0; // Blink Code current symbol
|
|
|
|
|
|
// ------------------------------------------------------------------------------------------------------------------------------------------------------------
|
|
// LOCAL FUNCTIONS
|
|
// ------------------------------------------------------------------------------------------------------------------------------------------------------------
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// Led blinking (non blocking) function
|
|
// ------------------------------------------------------------------------------
|
|
|
|
uint8_t blink_led ( uint16_t half_period ) // ( half_period max = 65 s )
|
|
{
|
|
|
|
blink_led_timer++;
|
|
|
|
if ( blink_led_timer < half_period ) // If half period has not been reached
|
|
{
|
|
return 0; // Exit timer function and return 0
|
|
}
|
|
else // half period reached - LED Toggle
|
|
{
|
|
PPM_PORT ^= ( 1 << PB0 ); // Toggle status LED
|
|
blink_led_timer = 0; // Blink led timer reset
|
|
|
|
return 1; // half period reached - Exit timer function and return 1
|
|
}
|
|
|
|
}
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// Led code (non blocking) function
|
|
// ------------------------------------------------------------------------------
|
|
|
|
void blink_code_led ( uint8_t code )
|
|
{
|
|
|
|
const uint8_t coding[2][14] = {
|
|
|
|
// PPM_PASSTROUGH_MODE
|
|
{ INTER_CODE, LONG_SYMBOL, LONG_SPACE, SHORT_SYMBOL, SHORT_SPACE, SHORT_SYMBOL, LOOP },
|
|
|
|
// JETI_MODE
|
|
{ INTER_CODE, LONG_SYMBOL, LONG_SPACE, SHORT_SYMBOL, SHORT_SPACE, SHORT_SYMBOL, SHORT_SPACE, SHORT_SYMBOL,LOOP }
|
|
|
|
};
|
|
|
|
led_code_timer++;
|
|
|
|
|
|
switch ( coding [ code - 2 ] [ led_code_symbol ] )
|
|
{
|
|
case INTER_CODE:
|
|
|
|
if ( led_code_timer < ( INTER_CODE_DURATION ) ) return;
|
|
else PPM_PORT |= ( 1 << PB0 ); // Enable status LED
|
|
break;
|
|
|
|
case LONG_SYMBOL: // Long symbol
|
|
|
|
if ( led_code_timer < ( SYMBOL_LONG_DURATION ) ) return;
|
|
else PPM_PORT &= ~( 1 << PB0 ); // Disable status LED
|
|
break;
|
|
|
|
case SHORT_SYMBOL: // Short symbol
|
|
|
|
if ( led_code_timer < ( SYMBOL_SHORT_DURATION ) ) return;
|
|
else PPM_PORT &= ~( 1 << PB0 ); // Disable status LED
|
|
break;
|
|
|
|
case SHORT_SPACE: // Short space
|
|
|
|
if ( led_code_timer < ( SPACE_SHORT_DURATION ) ) return;
|
|
else PPM_PORT |= ( 1 << PB0 ); // Enable status LED
|
|
break;
|
|
|
|
case LONG_SPACE: // Long space
|
|
|
|
if ( led_code_timer < ( SPACE_LONG_DURATION ) ) return;
|
|
else PPM_PORT |= ( 1 << PB0 ); // Enable status LED
|
|
break;
|
|
|
|
case LOOP: // Loop to code start
|
|
led_code_symbol = 0;
|
|
return;
|
|
break;
|
|
|
|
}
|
|
|
|
led_code_timer = 0; // Code led timer reset
|
|
led_code_symbol++; // Next symbol
|
|
|
|
return; // LED code function return
|
|
|
|
}
|
|
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// ppm reading helper - interrupt safe and non blocking function
|
|
// ------------------------------------------------------------------------------
|
|
uint16_t ppm_read( uint8_t channel )
|
|
{
|
|
uint16_t ppm_tmp = ppm[ channel ];
|
|
while( ppm_tmp != ppm[ channel ] ) ppm_tmp = ppm[ channel ];
|
|
|
|
return ppm_tmp;
|
|
}
|
|
|
|
// ------------------------------------------------------------------------------------------------------------------------------------------------------------
|
|
// INITIALISATION CODE
|
|
// ------------------------------------------------------------------------------------------------------------------------------------------------------------
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// Reset Source checkings
|
|
// ------------------------------------------------------------------------------
|
|
if (MCUSR & 1) // Power-on Reset
|
|
{
|
|
MCUSR=0; // Clear MCU Status register
|
|
// custom code here
|
|
}
|
|
else if (MCUSR & 2) // External Reset
|
|
{
|
|
MCUSR=0; // Clear MCU Status register
|
|
// custom code here
|
|
}
|
|
else if (MCUSR & 4) // Brown-Out Reset
|
|
{
|
|
MCUSR=0; // Clear MCU Status register
|
|
brownout_reset=true;
|
|
}
|
|
else // Watchdog Reset
|
|
{
|
|
MCUSR=0; // Clear MCU Status register
|
|
// custom code here
|
|
}
|
|
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// Servo input and PPM generator init
|
|
// ------------------------------------------------------------------------------
|
|
ppm_encoder_init();
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// Outputs init
|
|
// ------------------------------------------------------------------------------
|
|
PPM_DDR |= ( 1 << PB0 ); // Set LED pin (PB0) to output
|
|
PPM_DDR |= ( 1 << PB1 ); // Set MUX pin (PB1) to output
|
|
PPM_DDR |= ( 1 << PPM_OUTPUT_PIN ); // Set PPM pin (PPM_OUTPUT_PIN, OC1B) to output
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// Timer0 init (normal mode) used for LED control and custom code
|
|
// ------------------------------------------------------------------------------
|
|
TCCR0A = 0x00; // Clock source: System Clock
|
|
TCCR0B = 0x05; // Set 1024x prescaler - Clock value: 15.625 kHz - 16 ms max time
|
|
TCNT0 = 0x00;
|
|
OCR0A = 0x00; // OC0x outputs: Disconnected
|
|
OCR0B = 0x00;
|
|
TIMSK0 = 0x00; // Timer 1 interrupt disable
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// Enable global interrupt
|
|
// ------------------------------------------------------------------------------
|
|
sei(); // Enable Global interrupt flag
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// Disable radio passthrough (mux chip A/B control)
|
|
// ------------------------------------------------------------------------------
|
|
PPM_PORT |= ( 1 << PB1 ); // Set PIN B1 to disable Radio passthrough (mux)
|
|
|
|
|
|
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// Check for first valid servo signal
|
|
// ------------------------------------------------------------------------------
|
|
while( 1 )
|
|
{
|
|
if ( servo_error_condition || servo_input_missing ) // We have an error
|
|
{
|
|
blink_led ( 6 * LOOP_TIMER_10MS ); // Status LED very fast blink if invalid servo input or missing signal
|
|
}
|
|
else // We are running normally
|
|
{
|
|
init = false; // initialisation is done,
|
|
switch ( servo_input_mode )
|
|
{
|
|
case SERVO_PWM_MODE: // Normal PWM mode
|
|
goto PWM_LOOP;
|
|
break;
|
|
|
|
case PPM_PASSTROUGH_MODE: // PPM_PASSTROUGH_MODE
|
|
goto PPM_PASSTHROUGH_LOOP;
|
|
break;
|
|
|
|
default: // Normal PWM mode
|
|
goto PWM_LOOP;
|
|
break;
|
|
}
|
|
}
|
|
_delay_us (970); // Slow down while loop
|
|
}
|
|
|
|
|
|
// ------------------------------------------------------------------------------------------------------------------------------------------------------------
|
|
// AUXILIARY TASKS
|
|
// ------------------------------------------------------------------------------------------------------------------------------------------------------------
|
|
PWM_LOOP: // SERVO_PWM_MODE
|
|
while( 1 )
|
|
{
|
|
#ifdef PASSTHROUGH_MODE_ENABLED
|
|
// ------------------------------------------------------------------------------
|
|
// Radio passthrough control (mux chip A/B control)
|
|
// ------------------------------------------------------------------------------
|
|
|
|
mux_timer++; // Increment mux timer
|
|
|
|
if ( mux_timer > ( 3 * LOOP_TIMER_10MS ) ) // Check Passthrough Channel every 30ms
|
|
{
|
|
|
|
mux_timer = 0; // Reset mux timer
|
|
|
|
|
|
if ( mux_counter++ < 5) // Check passthrough channel position 5 times
|
|
{
|
|
|
|
mux_ppm = ppm_read( PASSTHROUGH_CHANNEL - 1 ); // Safely read passthrough channel ppm position
|
|
|
|
if ( mux_ppm < ( PASSTHROUGH_CHANNEL_OFF_US ) ) // Check ppm value and update validation counter
|
|
{
|
|
mux_check -= 1;
|
|
}
|
|
else if ( mux_ppm > ( PASSTHROUGH_CHANNEL_ON_US ) )
|
|
{
|
|
mux_check += 1;
|
|
}
|
|
|
|
}
|
|
else // Check
|
|
{
|
|
switch ( mux_check ) // If all 5 checks are the same, update mux status flag
|
|
{
|
|
case -5:
|
|
mux_passthrough = false;
|
|
PPM_PORT |= ( 1 << PB1 ); // Set PIN B1 (Mux) to disable Radio passthrough
|
|
break;
|
|
|
|
case 5:
|
|
mux_passthrough = true;
|
|
PPM_PORT &= ~( 1 << PB1 ); // Reset PIN B1 (Mux) to enable Radio passthrough
|
|
break;
|
|
}
|
|
mux_check = 0; // Reset mux validation counter
|
|
mux_counter = 0; // Reset mux counter
|
|
}
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// Status LED control
|
|
// ------------------------------------------------------------------------------
|
|
if ( servo_error_condition || servo_input_missing ) // We have an error
|
|
{
|
|
blink_led ( 6 * LOOP_TIMER_10MS ); // Status LED very fast blink if invalid servo input or missing signal
|
|
}
|
|
else // We are running normally
|
|
{
|
|
if ( mux_passthrough == false ) // Normal mode : status LED toggle speed from throttle position
|
|
{
|
|
led_acceleration = ( ppm[THROTTLE_CHANNEL - 1] - ( PPM_SERVO_MIN ) ) / 2;
|
|
blink_led ( LED_LOW_BLINKING_RATE - led_acceleration );
|
|
}
|
|
else // Passthrough mode : status LED never flashing
|
|
{
|
|
// Enable status LED if throttle > THROTTLE_CHANNEL_LED_TOGGLE_US
|
|
if ( ppm[THROTTLE_CHANNEL - 1] > ( THROTTLE_CHANNEL_LED_TOGGLE_US ) )
|
|
{
|
|
PPM_PORT |= ( 1 << PB0 );
|
|
}
|
|
// Disable status LED if throttle <= THROTTLE_CHANNEL_LED_TOGGLE_US
|
|
else if ( ppm[THROTTLE_CHANNEL - 1] <= ( THROTTLE_CHANNEL_LED_TOGGLE_US ) )
|
|
{
|
|
PPM_PORT &= ~( 1 << PB0 );
|
|
}
|
|
}
|
|
}
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// Servo input error detection
|
|
// ------------------------------------------------------------------------------
|
|
|
|
// If there are too many errors during the detection time window, then trig servo error condition
|
|
|
|
if ( servo_input_errors > 0 ) // Start error rate checking if an error did occur
|
|
{
|
|
if ( servo_error_detection_timer > ( ERROR_DETECTION_WINDOW ) ) // If 10s delay reached
|
|
{
|
|
servo_error_detection_timer = 0; // Reset error detection timer
|
|
|
|
servo_input_errors = 0; // Reset servo input error counter
|
|
|
|
}
|
|
else // If 10s delay is not reached
|
|
{
|
|
servo_error_detection_timer++; // Increment servo error timer value
|
|
|
|
if ( servo_input_errors >= ( ERROR_THRESHOLD ) ) // If there are too many errors
|
|
{
|
|
servo_error_condition = true; // Enable error condition flag
|
|
servo_input_errors = 0; // Reset servo input error counter
|
|
servo_error_detection_timer = 0; // Reset servo error detection timer
|
|
servo_error_condition_timer = 0; // Reset servo error condition timer
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
|
|
// Servo error condition flag (will control blinking LED)
|
|
|
|
if ( servo_error_condition == true ) // We are in error condition
|
|
{
|
|
|
|
if ( servo_error_condition_timer > ( ERROR_CONDITION_DELAY ) ) // If 3s delay reached
|
|
{
|
|
servo_error_condition_timer = 0; // Reset servo error condition timer
|
|
|
|
servo_error_condition = false; // Reset servo error condition flag (Led will stop very fast blink)
|
|
}
|
|
|
|
else servo_error_condition_timer++; // If 3s delay is not reached update servo error condition timer value
|
|
}
|
|
|
|
_delay_us (950); // Slow down while loop
|
|
|
|
} // PWM Loop end
|
|
|
|
|
|
|
|
PPM_PASSTHROUGH_LOOP: // PPM_PASSTROUGH_MODE
|
|
|
|
while (1)
|
|
{
|
|
// ------------------------------------------------------------------------------
|
|
// Status LED control
|
|
// ------------------------------------------------------------------------------
|
|
|
|
if ( servo_input_missing ) // We have an error
|
|
{
|
|
blink_led ( 6 * LOOP_TIMER_10MS ); // Status LED very fast blink if invalid servo input or missing signal
|
|
}
|
|
else // We are running normally
|
|
{
|
|
blink_code_led ( PPM_PASSTROUGH_MODE ); // Blink LED according to mode 2 code (one long, two shorts).
|
|
}
|
|
|
|
_delay_us (970); // Slow down this loop
|
|
|
|
|
|
} // PPM_PASSTHROUGH Loop end
|
|
|
|
} // main function end
|
|
|
|
|