ardupilot/libraries/AP_Compass/CompassCalibrator.h

#pragma once

#include <AP_Math/AP_Math.h>

#define COMPASS_CAL_NUM_SPHERE_PARAMS       4
#define COMPASS_CAL_NUM_ELLIPSOID_PARAMS    9
#define COMPASS_CAL_NUM_SAMPLES             300     // number of samples required before fitting begins

#define COMPASS_MIN_SCALE_FACTOR 0.85
#define COMPASS_MAX_SCALE_FACTOR 1.4

class CompassCalibrator {
public:
    CompassCalibrator();

    // set tolerance of calibration (aka fitness)
    void set_tolerance(float tolerance) { _tolerance = tolerance; }

    // set compass's initial orientation and whether it should be automatically fixed (if required)
    void set_orientation(enum Rotation orientation, bool is_external, bool fix_orientation);

    // start or stop the calibration
    void start(bool retry, float delay, uint16_t offset_max, uint8_t compass_idx);
    void stop();

    // update the state machine and calculate offsets, diagonals and offdiagonals
    void update(bool &failure);
    void new_sample(const Vector3f &sample);

    bool check_for_timeout();

    // running is true if actively calculating offsets, diagonals or offdiagonals
    bool running() const;

    // compass calibration states
    enum class Status {
        NOT_STARTED = 0,
        WAITING_TO_START = 1,
        RUNNING_STEP_ONE = 2,
        RUNNING_STEP_TWO = 3,
        SUCCESS = 4,
        FAILED = 5,
        BAD_ORIENTATION = 6,
        BAD_RADIUS = 7,
    };

    // get status of calibrations progress
    Status get_status() const { return _status; }

    // get calibration outputs (offsets, diagonals, offdiagonals) and fitness
    void get_calibration(Vector3f &offsets, Vector3f &diagonals, Vector3f &offdiagonals, float &scale_factor);
    float get_fitness() const { return sqrtf(_fitness); }

    // get corrected (and original) orientation
    enum Rotation get_orientation() const { return _orientation; }
    enum Rotation get_original_orientation() const { return _orig_orientation; }
    float get_orientation_confidence() const { return _orientation_confidence; }

    // get completion percentage (0 to 100) for reporting to GCS
    float get_completion_percent() const;

    // get how many attempts have been made to calibrate for reporting to GCS
    uint8_t get_attempt() const { return _attempt; }

    // get completion mask for mavlink reporting (a bitmask of faces/directions for which we have compass samples)
    typedef uint8_t completion_mask_t[10];
    const completion_mask_t& get_completion_mask() const { return _completion_mask; }

private:

    // results
    class param_t {
    public:
        float* get_sphere_params() {
            return &radius;
        }

        float* get_ellipsoid_params() {
            return &offset.x;
        }

        float radius;       // magnetic field strength calculated from samples
        Vector3f offset;    // offsets
        Vector3f diag;      // diagonal scaling
        Vector3f offdiag;   // off diagonal scaling
        float scale_factor; // scaling factor to compensate for radius error
    };

    // compact class for approximate attitude, to save memory
    class AttitudeSample {
    public:
        Matrix3f get_rotmat();
        void set_from_ahrs();
    private:
        int8_t roll;
        int8_t pitch;
        int8_t yaw;
    };

    // compact class to hold compass samples, to save memory
    class CompassSample {
    public:
        Vector3f get() const;
        void set(const Vector3f &in);
        AttitudeSample att;
    private:
        int16_t x;
        int16_t y;
        int16_t z;
    };

    // set status including any required initialisation
    bool set_status(Status status);

    // returns true if sample should be added to buffer
    bool accept_sample(const Vector3f &sample, uint16_t skip_index = UINT16_MAX);
    bool accept_sample(const CompassSample &sample, uint16_t skip_index = UINT16_MAX);

    // returns true if fit is acceptable
    bool fit_acceptable();

    // clear sample buffer and reset offsets and scaling to their defaults
    void reset_state();

    // initialize fitness before starting a fit
    void initialize_fit();

    // true if enough samples have been collected and fitting has begun (aka runniong())
    bool fitting() const;

    // thins out samples between step one and step two
    void thin_samples();

    // calc the fitness of a single sample vs a set of parameters (offsets, diagonals, off diagonals)
    float calc_residual(const Vector3f& sample, const param_t& params) const;

    // calc the fitness of the parameters (offsets, diagonals, off diagonals) vs all the samples collected
    // returns 1.0e30f if the sample buffer is empty
    float calc_mean_squared_residuals(const param_t& params) const;

    // calculate initial offsets by simply taking the average values of the samples
    void calc_initial_offset();

    // run sphere fit to calculate diagonals and offdiagonals
    void calc_sphere_jacob(const Vector3f& sample, const param_t& params, float* ret) const;
    void run_sphere_fit();

    // run ellipsoid fit to calculate diagonals and offdiagonals
    void calc_ellipsoid_jacob(const Vector3f& sample, const param_t& params, float* ret) const;
    void run_ellipsoid_fit();

    // update the completion mask based on a single sample
    void update_completion_mask(const Vector3f& sample);

    // reset and updated the completion mask using all samples in the sample buffer
    void update_completion_mask();

    // calculate compass orientation
    Vector3f calculate_earth_field(CompassSample &sample, enum Rotation r);
    bool calculate_orientation();

    // fix radius to compensate for sensor scaling errors
    bool fix_radius();

    uint8_t _compass_idx;                   // index of the compass providing data
    Status _status;                         // current state of calibrator
    uint32_t _last_sample_ms;               // system time of last sample received for timeout

    // values provided by caller
    float _delay_start_sec;                 // seconds to delay start of calibration (provided by caller)
    bool _retry;                            // true if calibration should be restarted on failured (provided by caller)
    float _tolerance = 5.0;                 // worst acceptable RMS tolerance (aka fitness).  see set_tolerance()
    uint16_t _offset_max;                   // maximum acceptable offsets (provided by caller)

    // behavioral state
    uint32_t _start_time_ms;                // system time start() function was last called
    uint8_t _attempt;                       // number of attempts have been made to calibrate
    completion_mask_t _completion_mask;     // bitmask of directions in which we have samples
    CompassSample *_sample_buffer;          // buffer of sensor values
    uint16_t _samples_collected;            // number of samples in buffer
    uint16_t _samples_thinned;              // number of samples removed by the thin_samples() call (called before step 2 begins)

    // fit state
    class param_t _params;                  // latest calibration outputs
    uint16_t _fit_step;                     // step during RUNNING_STEP_ONE/TWO which performs sphere fit and ellipsoid fit
    float _fitness;                         // fitness (mean squared residuals) of current parameters
    float _initial_fitness;                 // fitness before latest "fit" was attempted (used to determine if fit was an improvement)
    float _sphere_lambda;                   // sphere fit's lambda
    float _ellipsoid_lambda;                // ellipsoid fit's lambda

    // variables for orientation checking
    enum Rotation _orientation;             // latest detected orientation
    enum Rotation _orig_orientation;        // original orientation provided by caller
    bool _is_external;                      // true if compass is external (provided by caller)
    bool _check_orientation;                // true if orientation should be automatically checked
    bool _fix_orientation;                  // true if orientation should be fixed if necessary
    float _orientation_confidence;          // measure of confidence in automatic orientation detection
};