Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
ardupilot/ArduCopter/config.h

837 lines
20 KiB
C
Raw Blame History

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
//
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
//
// WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
//
// DO NOT EDIT this file to adjust your configuration. Create your own
// APM_Config.h and use APM_Config.h.example as a reference.
//
// WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
///
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
//
// Default and automatic configuration details.
//
// Notes for maintainers:
//
// - Try to keep this file organised in the same order as APM_Config.h.example
//
#include "defines.h"
///
/// DO NOT EDIT THIS INCLUDE - if you want to make a local change, make that
/// change in your local copy of APM_Config.h.
///
#include "APM_Config.h" // <== THIS INCLUDE, DO NOT EDIT IT. EVER.
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
// HARDWARE CONFIGURATION AND CONNECTIONS
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
// APM HARDWARE
//
#ifndef CONFIG_APM_HARDWARE
# define CONFIG_APM_HARDWARE APM_HARDWARE_APM1
#endif
//////////////////////////////////////////////////////////////////////////////
// APM2 HARDWARE DEFAULTS
//
#if CONFIG_APM_HARDWARE == APM_HARDWARE_APM2
# define CONFIG_IMU_TYPE CONFIG_IMU_MPU6000
# define CONFIG_PUSHBUTTON DISABLED
# define CONFIG_RELAY DISABLED
# define MAG_ORIENTATION AP_COMPASS_APM2_SHIELD
# define CONFIG_SONAR_SOURCE SONAR_SOURCE_ANALOG_PIN
# ifdef APM2_BETA_HARDWARE
# define CONFIG_BARO AP_BARO_BMP085
# else // APM2 Production Hardware (default)
# define CONFIG_BARO AP_BARO_MS5611
# endif
#endif
//////////////////////////////////////////////////////////////////////////////
// FRAME_CONFIG
//
#ifndef FRAME_CONFIG
# define FRAME_CONFIG QUAD_FRAME
#endif
#ifndef FRAME_ORIENTATION
# define FRAME_ORIENTATION PLUS_FRAME
#endif
//////////////////////////////////////////////////////////////////////////////
// IMU Selection
//
#ifndef CONFIG_IMU_TYPE
# define CONFIG_IMU_TYPE CONFIG_IMU_OILPAN
#endif
#if CONFIG_IMU_TYPE == CONFIG_IMU_MPU6000
# ifndef CONFIG_MPU6000_CHIP_SELECT_PIN
# define CONFIG_MPU6000_CHIP_SELECT_PIN 53
# endif
#endif
//////////////////////////////////////////////////////////////////////////////
// ADC Enable - used to eliminate for systems which don't have ADC.
//
#ifndef CONFIG_ADC
# if CONFIG_IMU_TYPE == CONFIG_IMU_OILPAN
# define CONFIG_ADC ENABLED
# else
# define CONFIG_ADC DISABLED
# endif
#endif
//////////////////////////////////////////////////////////////////////////////
// PWM control
//
#ifndef INSTANT_PWM
# define INSTANT_PWM DISABLED
#endif
// LED and IO Pins
//
#if CONFIG_APM_HARDWARE == APM_HARDWARE_APM1
# define A_LED_PIN 37
# define B_LED_PIN 36
# define C_LED_PIN 35
# define LED_ON HIGH
# define LED_OFF LOW
# define SLIDE_SWITCH_PIN 40
# define PUSHBUTTON_PIN 41
# define USB_MUX_PIN -1
# define CLI_SLIDER_ENABLED DISABLED
#elif CONFIG_APM_HARDWARE == APM_HARDWARE_APM2
# define A_LED_PIN 27
# define B_LED_PIN 26
# define C_LED_PIN 25
# define LED_ON LOW
# define LED_OFF HIGH
# define SLIDE_SWITCH_PIN (-1)
# define PUSHBUTTON_PIN (-1)
# define CLI_SLIDER_ENABLED DISABLED
# define USB_MUX_PIN 23
#endif
//////////////////////////////////////////////////////////////////////////////
// Pushbutton & Relay
//
#ifndef CONFIG_PUSHBUTTON
# define CONFIG_PUSHBUTTON ENABLED
#endif
#ifndef CONFIG_RELAY
# define CONFIG_RELAY ENABLED
#endif
//////////////////////////////////////////////////////////////////////////////
// Barometer
//
#ifndef CONFIG_BARO
# define CONFIG_BARO AP_BARO_BMP085
#endif
//////////////////////////////////////////////////////////////////////////////
// Sonar
//
#ifndef CONFIG_SONAR_SOURCE
# define CONFIG_SONAR_SOURCE SONAR_SOURCE_ADC
#endif
#if CONFIG_SONAR_SOURCE == SONAR_SOURCE_ADC && CONFIG_ADC == DISABLED
# warning Cannot use ADC for CONFIG_SONAR_SOURCE, becaude CONFIG_ADC is DISABLED
# warning Defaulting CONFIG_SONAR_SOURCE to ANALOG_PIN
# undef CONFIG_SONAR_SOURCE
# define CONFIG_SONAR_SOURCE SONAR_SOURCE_ANALOG_PIN
#endif
#if CONFIG_SONAR_SOURCE == SONAR_SOURCE_ADC
# ifndef CONFIG_SONAR_SOURCE_ADC_CHANNEL
# define CONFIG_SONAR_SOURCE_ADC_CHANNEL 7
# endif
#elif CONFIG_SONAR_SOURCE == SONAR_SOURCE_ANALOG_PIN
# ifndef CONFIG_SONAR_SOURCE_ANALOG_PIN
# define CONFIG_SONAR_SOURCE_ANALOG_PIN AN4
# endif
#else
# warning Invalid value for CONFIG_SONAR_SOURCE, disabling sonar
# undef SONAR_ENABLED
# define SONAR_ENABLED DISABLED
#endif
#ifndef CONFIG_SONAR
# define CONFIG_SONAR ENABLED
#endif
//////////////////////////////////////////////////////////////////////////////
// Acrobatics
//
#ifndef CH7_OPTION
# define CH7_OPTION CH7_SAVE_WP
#endif
//////////////////////////////////////////////////////////////////////////////
// AIRSPEED_SENSOR
// AIRSPEED_RATIO
//
#ifndef AIRSPEED_SENSOR
# define AIRSPEED_SENSOR DISABLED
#endif
#ifndef AIRSPEED_RATIO
# define AIRSPEED_RATIO 1.9936 // Note - this varies from the value in ArduPilot due to the difference in ADC resolution
#endif
//////////////////////////////////////////////////////////////////////////////
// HIL_MODE OPTIONAL
#ifndef HIL_MODE
#define HIL_MODE HIL_MODE_DISABLED
#endif
#if HIL_MODE != HIL_MODE_DISABLED // we are in HIL mode
# undef GPS_PROTOCOL
# define GPS_PROTOCOL GPS_PROTOCOL_NONE
#undef CONFIG_SONAR
#define CONFIG_SONAR DISABLED
#endif
//////////////////////////////////////////////////////////////////////////////
// GPS_PROTOCOL
//
#ifndef GPS_PROTOCOL
# define GPS_PROTOCOL GPS_PROTOCOL_AUTO
#endif
#ifndef MAV_SYSTEM_ID
# define MAV_SYSTEM_ID 1
#endif
//////////////////////////////////////////////////////////////////////////////
// Serial port speeds.
//
#ifndef SERIAL0_BAUD
# define SERIAL0_BAUD 115200
#endif
#ifndef SERIAL3_BAUD
# define SERIAL3_BAUD 57600
#endif
//////////////////////////////////////////////////////////////////////////////
// Battery monitoring
//
#ifndef BATTERY_EVENT
# define BATTERY_EVENT DISABLED
#endif
#ifndef LOW_VOLTAGE
# define LOW_VOLTAGE 9.6
#endif
#ifndef VOLT_DIV_RATIO
# define VOLT_DIV_RATIO 3.56
#endif
#ifndef CURR_AMP_PER_VOLT
# define CURR_AMP_PER_VOLT 27.32
#endif
#ifndef CURR_AMPS_OFFSET
# define CURR_AMPS_OFFSET 0.0
#endif
#ifndef HIGH_DISCHARGE
# define HIGH_DISCHARGE 1760
#endif
#ifndef PIEZO
# define PIEZO ENABLED //Enables Piezo Code and beeps once on Startup to verify operation
#endif
#ifndef PIEZO_LOW_VOLTAGE
# define PIEZO_LOW_VOLTAGE ENABLED //Enables Tone on reaching low battery or current alert
#endif
#ifndef PIEZO_ARMING
# define PIEZO_ARMING ENABLED //Two tones on ARM, 1 Tone on disarm
#endif
//////////////////////////////////////////////////////////////////////////////
// INPUT_VOLTAGE
//
#ifndef INPUT_VOLTAGE
# define INPUT_VOLTAGE 5.0
#endif
//////////////////////////////////////////////////////////////////////////////
// MAGNETOMETER
#ifndef MAGNETOMETER
# define MAGNETOMETER DISABLED
#endif
#ifndef MAG_ORIENTATION
# define MAG_ORIENTATION AP_COMPASS_COMPONENTS_DOWN_PINS_FORWARD
#endif
//////////////////////////////////////////////////////////////////////////////
// CAMERA GAINS
#ifndef CAM_ROLL_GAIN
# define CAM_ROLL_GAIN 1.0
#endif
#ifndef CAM_PITCH_GAIN
# define CAM_PITCH_GAIN 1.0
#endif
//////////////////////////////////////////////////////////////////////////////
// OPTICAL_FLOW
#if defined( __AVR_ATmega2560__ ) // determines if optical flow code is included
#define OPTFLOW_ENABLED
#endif
#ifndef OPTFLOW // sets global enabled/disabled flag for optflow (as seen in CLI)
# define OPTFLOW DISABLED
#endif
#ifndef OPTFLOW_ORIENTATION
# define OPTFLOW_ORIENTATION AP_OPTICALFLOW_ADNS3080_PINS_FORWARD
#endif
#ifndef OPTFLOW_FOV
# define OPTFLOW_FOV AP_OPTICALFLOW_ADNS3080_08_FOV
#endif
//////////////////////////////////////////////////////////////////////////////
// RADIO CONFIGURATION
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
// FLIGHT_MODE
//
#if !defined(FLIGHT_MODE_1)
# define FLIGHT_MODE_1 STABILIZE
#endif
#if !defined(FLIGHT_MODE_2)
# define FLIGHT_MODE_2 STABILIZE
#endif
#if !defined(FLIGHT_MODE_3)
# define FLIGHT_MODE_3 STABILIZE
#endif
#if !defined(FLIGHT_MODE_4)
# define FLIGHT_MODE_4 STABILIZE
#endif
#if !defined(FLIGHT_MODE_5)
# define FLIGHT_MODE_5 STABILIZE
#endif
#if !defined(FLIGHT_MODE_6)
# define FLIGHT_MODE_6 STABILIZE
#endif
//////////////////////////////////////////////////////////////////////////////
// THROTTLE_FAILSAFE
// THROTTLE_FS_VALUE
// THROTTLE_FAILSAFE_ACTION
//
#ifndef THROTTLE_FAILSAFE
# define THROTTLE_FAILSAFE DISABLED
#endif
#ifndef THROTTE_FS_VALUE
# define THROTTLE_FS_VALUE 975
#endif
#ifndef THROTTLE_FAILSAFE_ACTION
# define THROTTLE_FAILSAFE_ACTION 2
#endif
#ifndef MINIMUM_THROTTLE
# define MINIMUM_THROTTLE 130
#endif
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
// STARTUP BEHAVIOUR
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
// GROUND_START_DELAY
//
#ifndef GROUND_START_DELAY
# define GROUND_START_DELAY 3
#endif
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
// FLIGHT AND NAVIGATION CONTROL
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
// Y6 Support
#ifndef TOP_BOTTOM_RATIO
# define TOP_BOTTOM_RATIO 1.00
#endif
//////////////////////////////////////////////////////////////////////////////
// Attitude Control
//
// Alt Hold Mode
#ifndef ALT_HOLD_YAW
# define ALT_HOLD_YAW YAW_HOLD
#endif
#ifndef ALT_HOLD_RP
# define ALT_HOLD_RP ROLL_PITCH_STABLE
#endif
#ifndef ALT_HOLD_THR
# define ALT_HOLD_THR THROTTLE_HOLD
#endif
// AUTO Mode
#ifndef AUTO_YAW
# define AUTO_YAW YAW_AUTO
#endif
#ifndef AUTO_RP
# define AUTO_RP ROLL_PITCH_AUTO
#endif
#ifndef AUTO_THR
# define AUTO_THR THROTTLE_AUTO
#endif
// CIRCLE Mode
#ifndef CIRCLE_YAW
# define CIRCLE_YAW YAW_AUTO
#endif
#ifndef CIRCLE_RP
# define CIRCLE_RP ROLL_PITCH_AUTO
#endif
#ifndef CIRCLE_THR
# define CIRCLE_THR THROTTLE_HOLD
#endif
// LOITER Mode
#ifndef LOITER_YAW
# define LOITER_YAW YAW_HOLD
#endif
#ifndef LOITER_RP
# define LOITER_RP ROLL_PITCH_AUTO
#endif
#ifndef LOITER_THR
# define LOITER_THR THROTTLE_HOLD
#endif
// RTL Mode
#ifndef RTL_YAW
# define RTL_YAW YAW_HOLD
#endif
#ifndef RTL_RP
# define RTL_RP ROLL_PITCH_AUTO
#endif
#ifndef RTL_THR
# define RTL_THR THROTTLE_HOLD
#endif
#ifndef SUPER_SIMPLE
# define SUPER_SIMPLE DISABLED
#endif
//////////////////////////////////////////////////////////////////////////////
// Attitude Control
//
// Extra motor values that are changed from time to time by jani @ jDrones as software
// and charachteristics changes.
#ifdef MOTORS_JD880
# define STABILIZE_ROLL_P 3.6
# define STABILIZE_ROLL_I 0.0
# define STABILIZE_ROLL_IMAX 40.0 // degrees
# define STABILIZE_PITCH_P 3.6
# define STABILIZE_PITCH_I 0.0
# define STABILIZE_PITCH_IMAX 40.0 // degrees
#endif
#ifdef MOTORS_JD850
# define STABILIZE_ROLL_P 4.0
# define STABILIZE_ROLL_I 0.0
# define STABILIZE_ROLL_IMAX 40.0 // degrees
# define STABILIZE_PITCH_P 4.0
# define STABILIZE_PITCH_I 0.0
# define STABILIZE_PITCH_IMAX 40.0 // degrees
#endif
// Jasons default values that are good for smaller payload motors.
#ifndef STABILIZE_ROLL_P
# define STABILIZE_ROLL_P 4.6
#endif
#ifndef STABILIZE_ROLL_I
# define STABILIZE_ROLL_I 0.02
#endif
#ifndef STABILIZE_ROLL_IMAX
# define STABILIZE_ROLL_IMAX 40 // degrees
#endif
#ifndef STABILIZE_PITCH_P
# define STABILIZE_PITCH_P 4.6
#endif
#ifndef STABILIZE_PITCH_I
# define STABILIZE_PITCH_I 0.02
#endif
#ifndef STABILIZE_PITCH_IMAX
# define STABILIZE_PITCH_IMAX 40 // degrees
#endif
//////////////////////////////////////////////////////////////////////////////
// Acro Rate Control
//
#ifndef ACRO_ROLL_P
# define ACRO_ROLL_P 0.145
#endif
#ifndef ACRO_ROLL_I
# define ACRO_ROLL_I 0.0
#endif
#ifndef ACRO_ROLL_IMAX
# define ACRO_ROLL_IMAX 15 // degrees
#endif
#ifndef ACRO_PITCH_P
# define ACRO_PITCH_P 0.145
#endif
#ifndef ACRO_PITCH_I
# define ACRO_PITCH_I 0 //0.18
#endif
#ifndef ACRO_PITCH_IMAX
# define ACRO_PITCH_IMAX 15 // degrees
#endif
//////////////////////////////////////////////////////////////////////////////
// Stabilize Rate Control
//
#ifndef RATE_ROLL_P
# define RATE_ROLL_P 0.145
#endif
#ifndef RATE_ROLL_I
# define RATE_ROLL_I 0.0
#endif
#ifndef RATE_ROLL_IMAX
# define RATE_ROLL_IMAX 15 // degrees
#endif
#ifndef RATE_PITCH_P
# define RATE_PITCH_P 0.145
#endif
#ifndef RATE_PITCH_I
# define RATE_PITCH_I 0 //0.18
#endif
#ifndef RATE_PITCH_IMAX
# define RATE_PITCH_IMAX 15 // degrees
#endif
//////////////////////////////////////////////////////////////////////////////
// YAW Control
//
#ifndef STABILIZE_YAW_P
# define STABILIZE_YAW_P 7 // increase for more aggressive Yaw Hold, decrease if it's bouncy
#endif
#ifndef STABILIZE_YAW_I
# define STABILIZE_YAW_I 0.01 // set to .0001 to try and get over user's steady state error caused by poor balance
#endif
#ifndef STABILIZE_YAW_IMAX
# define STABILIZE_YAW_IMAX 8 // degrees * 100
#endif
#ifndef RATE_YAW_P
# define RATE_YAW_P .13 // used to control response in turning
#endif
#ifndef RATE_YAW_I
# define RATE_YAW_I 0.0
#endif
#ifndef RATE_YAW_IMAX
# define RATE_YAW_IMAX 50
#endif
//////////////////////////////////////////////////////////////////////////////
// Navigation control gains
//
#ifndef LOITER_P
# define LOITER_P .3 //
#endif
#ifndef LOITER_I
# define LOITER_I 0.01 //
#endif
#ifndef LOITER_IMAX
# define LOITER_IMAX 30 // degrees°
#endif
#ifndef NAV_P
# define NAV_P 3.0 //
#endif
#ifndef NAV_I
# define NAV_I 0.14 // Lowerd from .25 - saw lots of overshoot.
#endif
#ifndef NAV_IMAX
# define NAV_IMAX 30 // degrees
#endif
#ifndef WAYPOINT_SPEED_MAX
# define WAYPOINT_SPEED_MAX 600 // for 6m/s error = 13mph
#endif
//////////////////////////////////////////////////////////////////////////////
// Throttle control gains
//
#ifndef THROTTLE_CRUISE
# define THROTTLE_CRUISE 350 //
#endif
#ifndef THR_HOLD_P
# define THR_HOLD_P 0.4 //
#endif
#ifndef THR_HOLD_I
# define THR_HOLD_I 0.01 // with 4m error, 12.5s windup
#endif
#ifndef THR_HOLD_IMAX
# define THR_HOLD_IMAX 300
#endif
// RATE control
#ifndef THROTTLE_P
# define THROTTLE_P 0.4 //
#endif
#ifndef THROTTLE_I
# define THROTTLE_I 0.0 //
#endif
#ifndef THROTTLE_IMAX
# define THROTTLE_IMAX 300
#endif
//////////////////////////////////////////////////////////////////////////////
// Crosstrack compensation
//
#ifndef CROSSTRACK_GAIN
# define CROSSTRACK_GAIN 40
#endif
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
// DEBUGGING
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////
// DEBUG_LEVEL
//
#ifndef DEBUG_LEVEL
# define DEBUG_LEVEL SEVERITY_LOW
#endif
//////////////////////////////////////////////////////////////////////////////
// Dataflash logging control
//
// Logging must be disabled for 1280 build.
#if defined( __AVR_ATmega1280__ )
# if LOGGING_ENABLED == ENABLED
// If logging was enabled in APM_Config or command line, warn the user.
# warning "Logging is not supported on ATmega1280"
# undef LOGGING_ENABLED
# endif
# ifndef LOGGING_ENABLED
# define LOGGING_ENABLED DISABLED
# endif
#elif !defined(LOGGING_ENABLED)
// Logging is enabled by default for all other builds.
# define LOGGING_ENABLED ENABLED
#endif
#ifndef LOG_ATTITUDE_FAST
# define LOG_ATTITUDE_FAST DISABLED
#endif
#ifndef LOG_ATTITUDE_MED
# define LOG_ATTITUDE_MED ENABLED
#endif
#ifndef LOG_GPS
# define LOG_GPS ENABLED
#endif
#ifndef LOG_PM
# define LOG_PM ENABLED
#endif
#ifndef LOG_CTUN
# define LOG_CTUN ENABLED
#endif
#ifndef LOG_NTUN
# define LOG_NTUN ENABLED
#endif
#ifndef LOG_MODE
# define LOG_MODE ENABLED
#endif
#ifndef LOG_RAW
# define LOG_RAW DISABLED
#endif
#ifndef LOG_CMD
# define LOG_CMD ENABLED
#endif
// current
#ifndef LOG_CUR
# define LOG_CUR DISABLED
#endif
// quad motor PWMs
#ifndef LOG_MOTORS
# define LOG_MOTORS DISABLED
#endif
// guess!
#ifndef LOG_OPTFLOW
# define LOG_OPTFLOW DISABLED
#endif
// calculate the default log_bitmask
#define LOGBIT(_s) (LOG_##_s ? MASK_LOG_##_s : 0)
#define DEFAULT_LOG_BITMASK \
LOGBIT(ATTITUDE_FAST) | \
LOGBIT(ATTITUDE_MED) | \
LOGBIT(GPS) | \
LOGBIT(PM) | \
LOGBIT(CTUN) | \
LOGBIT(NTUN) | \
LOGBIT(MODE) | \
LOGBIT(RAW) | \
LOGBIT(CMD) | \
LOGBIT(CUR) | \
LOGBIT(MOTORS) | \
LOGBIT(OPTFLOW)
// if we are using fast, Disable Medium
//#if LOG_ATTITUDE_FAST == ENABLED
// #undef LOG_ATTITUDE_MED
// #define LOG_ATTITUDE_MED DISABLED
//#endif
#ifndef DEBUG_PORT
# define DEBUG_PORT 0
#endif
#if DEBUG_PORT == 0
# define SendDebug_P(a) Serial.print_P(PSTR(a))
# define SendDebugln_P(a) Serial.println_P(PSTR(a))
# define SendDebug Serial.print
# define SendDebugln Serial.println
#elif DEBUG_PORT == 1
# define SendDebug_P(a) Serial1.print_P(PSTR(a))
# define SendDebugln_P(a) Serial1.println_P(PSTR(a))
# define SendDebug Serial1.print
# define SendDebugln Serial1.println
#elif DEBUG_PORT == 2
# define SendDebug_P(a) Serial2.print_P(PSTR(a))
# define SendDebugln_P(a) Serial2.println_P(PSTR(a))
# define SendDebug Serial2.print
# define SendDebugln Serial2.println
#elif DEBUG_PORT == 3
# define SendDebug_P(a) Serial3.print_P(PSTR(a))
# define SendDebugln_P(a) Serial3.println_P(PSTR(a))
# define SendDebug Serial3.print
# define SendDebugln Serial3.println
#endif
//////////////////////////////////////////////////////////////////////////////
// Navigation defaults
//
#ifndef WP_RADIUS_DEFAULT
# define WP_RADIUS_DEFAULT 1
#endif
#ifndef LOITER_RADIUS
# define LOITER_RADIUS 10 // meters for circle mode
#endif
#ifndef ALT_HOLD_HOME
# define ALT_HOLD_HOME 0 // height to return to Home, 0 = Maintain current altitude
#endif
#ifndef USE_CURRENT_ALT
# define USE_CURRENT_ALT FALSE
#endif
#ifndef AUTO_RESET_LOITER
# define AUTO_RESET_LOITER 1 // enables Loiter to reset it's current location based on stick input.
#endif
#ifndef CUT_MOTORS
# define CUT_MOTORS 1 // do we cut the motors with no throttle?
#endif
#ifndef MOTOR_LEDS
# define MOTOR_LEDS 1 // 0 = off, 1 = on
#endif
//////////////////////////////////////////////////////////////////////////////
// RC override
//
#ifndef ALLOW_RC_OVERRIDE
# define ALLOW_RC_OVERRIDE DISABLED
#endif
//////////////////////////////////////////////////////////////////////////////
// Developer Items
//
// use this to completely disable the CLI
#ifndef CLI_ENABLED
# define CLI_ENABLED ENABLED
#endif
// use this to disable the CLI slider switch
#ifndef CLI_SLIDER_ENABLED
# define CLI_SLIDER_ENABLED ENABLED
#endif
// delay to prevent Xbee bricking, in milliseconds
#ifndef MAVLINK_TELEMETRY_PORT_DELAY
# define MAVLINK_TELEMETRY_PORT_DELAY 2000
#endif
Reference in New Issue View Git Blame Copy Permalink