mirror of https://github.com/ArduPilot/ardupilot
379 lines
13 KiB
C++
379 lines
13 KiB
C++
// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
|
|
|
|
#ifndef PARAMETERS_H
|
|
#define PARAMETERS_H
|
|
|
|
#include <AP_Common.h>
|
|
|
|
// Global parameter class.
|
|
//
|
|
class Parameters {
|
|
public:
|
|
// The version of the layout as described by the parameter enum.
|
|
//
|
|
// When changing the parameter enum in an incompatible fashion, this
|
|
// value should be incremented by one.
|
|
//
|
|
// The increment will prevent old parameters from being used incorrectly
|
|
// by newer code.
|
|
//
|
|
static const uint16_t k_format_version = 105;
|
|
|
|
// The parameter software_type is set up solely for ground station use
|
|
// and identifies the software type (eg ArduPilotMega versus ArduCopterMega)
|
|
// GCS will interpret values 0-9 as ArduPilotMega. Developers may use
|
|
// values within that range to identify different branches.
|
|
//
|
|
static const uint16_t k_software_type = 10; // 0 for APM trunk
|
|
|
|
//
|
|
// Parameter identities.
|
|
//
|
|
// The enumeration defined here is used to ensure that every parameter
|
|
// or parameter group has a unique ID number. This number is used by
|
|
// AP_Var to store and locate parameters in EEPROM.
|
|
//
|
|
// Note that entries without a number are assigned the next number after
|
|
// the entry preceding them. When adding new entries, ensure that they
|
|
// don't overlap.
|
|
//
|
|
// Try to group related variables together, and assign them a set
|
|
// range in the enumeration. Place these groups in numerical order
|
|
// at the end of the enumeration.
|
|
//
|
|
// WARNING: Care should be taken when editing this enumeration as the
|
|
// AP_Var load/save code depends on the values here to identify
|
|
// variables saved in EEPROM.
|
|
//
|
|
//
|
|
enum {
|
|
// Layout version number, always key zero.
|
|
//
|
|
k_param_format_version = 0,
|
|
k_param_software_type,
|
|
|
|
|
|
// Misc
|
|
//
|
|
k_param_log_bitmask,
|
|
|
|
// 110: Telemetry control
|
|
//
|
|
k_param_streamrates_port0 = 110,
|
|
k_param_streamrates_port3,
|
|
k_param_sysid_this_mav,
|
|
k_param_sysid_my_gcs,
|
|
|
|
//
|
|
// 140: Sensor parameters
|
|
//
|
|
k_param_IMU_calibration = 140,
|
|
k_param_battery_monitoring,
|
|
k_param_pack_capacity,
|
|
k_param_compass_enabled,
|
|
k_param_compass,
|
|
k_param_sonar,
|
|
k_param_frame_orientation,
|
|
k_param_top_bottom_ratio,
|
|
k_param_optflow_enabled,
|
|
|
|
//
|
|
// 160: Navigation parameters
|
|
//
|
|
k_param_crosstrack_entry_angle = 160,
|
|
k_param_pitch_max,
|
|
k_param_RTL_altitude,
|
|
|
|
//
|
|
// 180: Radio settings
|
|
//
|
|
k_param_rc_1 = 180,
|
|
k_param_rc_2,
|
|
k_param_rc_3,
|
|
k_param_rc_4,
|
|
k_param_rc_5,
|
|
k_param_rc_6,
|
|
k_param_rc_7,
|
|
k_param_rc_8,
|
|
k_param_rc_9,
|
|
k_param_rc_10,
|
|
k_param_throttle_min,
|
|
k_param_throttle_max,
|
|
k_param_throttle_fs_enabled,
|
|
k_param_throttle_fs_action,
|
|
k_param_throttle_fs_value,
|
|
k_param_throttle_cruise,
|
|
k_param_esc_calibrate,
|
|
|
|
|
|
#if FRAME_CONFIG == HELI_FRAME
|
|
//
|
|
// 200: Heli
|
|
//
|
|
k_param_heli_servo_1 = 200,
|
|
k_param_heli_servo_2,
|
|
k_param_heli_servo_3,
|
|
k_param_heli_servo_4,
|
|
k_param_heli_servo1_pos ,
|
|
k_param_heli_servo2_pos,
|
|
k_param_heli_servo3_pos,
|
|
k_param_heli_roll_max,
|
|
k_param_heli_pitch_max,
|
|
k_param_heli_collective_min,
|
|
k_param_heli_collective_max,
|
|
k_param_heli_collective_mid,
|
|
k_param_heli_ext_gyro_enabled,
|
|
k_param_heli_ext_gyro_gain, // 213
|
|
#endif
|
|
|
|
|
|
//
|
|
// 210: flight modes
|
|
//
|
|
k_param_flight_mode1,
|
|
k_param_flight_mode2,
|
|
k_param_flight_mode3,
|
|
k_param_flight_mode4,
|
|
k_param_flight_mode5,
|
|
k_param_flight_mode6,
|
|
|
|
|
|
//
|
|
// 220: Waypoint data
|
|
//
|
|
k_param_waypoint_mode = 220,
|
|
k_param_waypoint_total,
|
|
k_param_waypoint_index,
|
|
k_param_command_must_index,
|
|
k_param_waypoint_radius,
|
|
k_param_loiter_radius,
|
|
k_param_waypoint_speed_max,
|
|
|
|
//
|
|
// 240: PID Controllers
|
|
//
|
|
// Heading-to-roll PID:
|
|
// heading error from commnd to roll command deviation from trim
|
|
// (bank to turn strategy)
|
|
//
|
|
k_param_pid_rate_roll = 240,
|
|
k_param_pid_rate_pitch,
|
|
k_param_pid_rate_yaw,
|
|
k_param_pid_stabilize_roll,
|
|
k_param_pid_stabilize_pitch,
|
|
k_param_pid_stabilize_yaw,
|
|
k_param_pid_nav_lat,
|
|
k_param_pid_nav_lon,
|
|
k_param_pid_nav_wp,
|
|
k_param_pid_throttle,
|
|
k_param_pid_crosstrack,
|
|
|
|
|
|
// 255: reserved
|
|
};
|
|
|
|
AP_Int16 format_version;
|
|
AP_Int8 software_type;
|
|
|
|
// Telemetry control
|
|
//
|
|
AP_Int16 sysid_this_mav;
|
|
AP_Int16 sysid_my_gcs;
|
|
|
|
|
|
// Crosstrack navigation
|
|
//
|
|
AP_Int16 crosstrack_entry_angle;
|
|
|
|
// Waypoints
|
|
//
|
|
AP_Int8 waypoint_mode;
|
|
AP_Int8 waypoint_total;
|
|
AP_Int8 waypoint_index;
|
|
AP_Int8 command_must_index;
|
|
AP_Int8 waypoint_radius;
|
|
AP_Int8 loiter_radius;
|
|
AP_Int16 waypoint_speed_max;
|
|
|
|
// Throttle
|
|
//
|
|
AP_Int16 throttle_min;
|
|
AP_Int16 throttle_max;
|
|
AP_Int8 throttle_fs_enabled;
|
|
AP_Int8 throttle_fs_action;
|
|
AP_Int16 throttle_fs_value;
|
|
AP_Int16 throttle_cruise;
|
|
|
|
// Flight modes
|
|
//
|
|
AP_Int8 flight_mode1;
|
|
AP_Int8 flight_mode2;
|
|
AP_Int8 flight_mode3;
|
|
AP_Int8 flight_mode4;
|
|
AP_Int8 flight_mode5;
|
|
AP_Int8 flight_mode6;
|
|
|
|
// Radio settings
|
|
//
|
|
//AP_Var_group pwm_roll;
|
|
//AP_Var_group pwm_pitch;
|
|
//AP_Var_group pwm_throttle;
|
|
//AP_Var_group pwm_yaw;
|
|
|
|
AP_Int16 pitch_max;
|
|
|
|
// Misc
|
|
//
|
|
AP_Int16 log_bitmask;
|
|
AP_Int16 RTL_altitude;
|
|
|
|
AP_Int8 sonar_enabled;
|
|
AP_Int8 battery_monitoring; // 0=disabled, 1=3 cell lipo, 2=4 cell lipo, 3=total voltage only, 4=total voltage and current
|
|
AP_Int16 pack_capacity; // Battery pack capacity less reserve
|
|
AP_Int8 compass_enabled;
|
|
AP_Int8 esc_calibrate;
|
|
AP_Int8 frame_orientation;
|
|
AP_Float top_bottom_ratio;
|
|
AP_Int8 optflow_enabled;
|
|
|
|
#if FRAME_CONFIG == HELI_FRAME
|
|
// Heli
|
|
RC_Channel heli_servo_1, heli_servo_2, heli_servo_3, heli_servo_4; // servos for swash plate and tail
|
|
AP_Int16 heli_servo1_pos, heli_servo2_pos, heli_servo3_pos; // servo positions (3 because we don't need pos for tail servo)
|
|
AP_Int16 heli_roll_max, heli_pitch_max; // maximum allowed roll and pitch of swashplate
|
|
AP_Int16 heli_coll_min, heli_coll_max, heli_coll_mid; // min and max collective. mid = main blades at zero pitch
|
|
AP_Int8 heli_ext_gyro_enabled; // 0 = no external tail gyro, 1 = external tail gyro
|
|
AP_Int16 heli_ext_gyro_gain; // radio output 1000~2000 (value output on CH_7)
|
|
#endif
|
|
|
|
// RC channels
|
|
RC_Channel rc_1;
|
|
RC_Channel rc_2;
|
|
RC_Channel rc_3;
|
|
RC_Channel rc_4;
|
|
RC_Channel rc_5;
|
|
RC_Channel rc_6;
|
|
RC_Channel rc_7;
|
|
RC_Channel rc_8;
|
|
RC_Channel rc_camera_pitch;
|
|
RC_Channel rc_camera_roll;
|
|
|
|
// PID controllers
|
|
PID pid_rate_roll;
|
|
PID pid_rate_pitch;
|
|
PID pid_rate_yaw;
|
|
PID pid_stabilize_roll;
|
|
PID pid_stabilize_pitch;
|
|
PID pid_stabilize_yaw;
|
|
PID pid_nav_lat;
|
|
PID pid_nav_lon;
|
|
PID pid_nav_wp;
|
|
PID pid_throttle;
|
|
PID pid_crosstrack;
|
|
|
|
uint8_t junk;
|
|
|
|
// Note: keep initializers here in the same order as they are declared above.
|
|
Parameters() :
|
|
// variable default key name
|
|
//-------------------------------------------------------------------------------------------------------------------
|
|
format_version (k_format_version, k_param_format_version, PSTR("SYSID_SW_MREV")),
|
|
software_type (k_software_type, k_param_software_type, PSTR("SYSID_SW_TYPE")),
|
|
|
|
sysid_this_mav (MAV_SYSTEM_ID, k_param_sysid_this_mav, PSTR("SYSID_THISMAV")),
|
|
sysid_my_gcs (255, k_param_sysid_my_gcs, PSTR("SYSID_MYGCS")),
|
|
|
|
//crosstrack_gain (XTRACK_GAIN * 100, k_param_crosstrack_gain, PSTR("XTRK_GAIN_SC")),
|
|
crosstrack_entry_angle (XTRACK_ENTRY_ANGLE * 100, k_param_crosstrack_entry_angle, PSTR("XTRK_ANGLE_CD")),
|
|
|
|
sonar_enabled (DISABLED, k_param_sonar, PSTR("SONAR_ENABLE")),
|
|
battery_monitoring (DISABLED, k_param_battery_monitoring, PSTR("BATT_MONITOR")),
|
|
pack_capacity (HIGH_DISCHARGE, k_param_pack_capacity, PSTR("BATT_CAPACITY")),
|
|
compass_enabled (MAGNETOMETER, k_param_compass_enabled, PSTR("MAG_ENABLE")),
|
|
optflow_enabled (OPTFLOW, k_param_optflow_enabled, PSTR("FLOW_ENABLE")),
|
|
|
|
waypoint_mode (0, k_param_waypoint_mode, PSTR("WP_MODE")),
|
|
waypoint_total (0, k_param_waypoint_total, PSTR("WP_TOTAL")),
|
|
waypoint_index (0, k_param_waypoint_index, PSTR("WP_INDEX")),
|
|
command_must_index (0, k_param_command_must_index, PSTR("WP_MUST_INDEX")),
|
|
waypoint_radius (WP_RADIUS_DEFAULT, k_param_waypoint_radius, PSTR("WP_RADIUS")),
|
|
loiter_radius (LOITER_RADIUS_DEFAULT, k_param_loiter_radius, PSTR("WP_LOITER_RAD")),
|
|
waypoint_speed_max (WAYPOINT_SPEED_MAX, k_param_waypoint_speed_max, PSTR("WP_SPEED_MAX")),
|
|
|
|
throttle_min (0, k_param_throttle_min, PSTR("THR_MIN")),
|
|
throttle_max (1000, k_param_throttle_max, PSTR("THR_MAX")),
|
|
throttle_fs_enabled (THROTTLE_FAILSAFE, k_param_throttle_fs_enabled, PSTR("THR_FAILSAFE")),
|
|
throttle_fs_action (THROTTLE_FAILSAFE_ACTION, k_param_throttle_fs_action, PSTR("THR_FS_ACTION")),
|
|
throttle_fs_value (THROTTLE_FS_VALUE, k_param_throttle_fs_value, PSTR("THR_FS_VALUE")),
|
|
throttle_cruise (100, k_param_throttle_cruise, PSTR("TRIM_THROTTLE")),
|
|
|
|
flight_mode1 (FLIGHT_MODE_1, k_param_flight_mode1, PSTR("FLTMODE1")),
|
|
flight_mode2 (FLIGHT_MODE_2, k_param_flight_mode2, PSTR("FLTMODE2")),
|
|
flight_mode3 (FLIGHT_MODE_3, k_param_flight_mode3, PSTR("FLTMODE3")),
|
|
flight_mode4 (FLIGHT_MODE_4, k_param_flight_mode4, PSTR("FLTMODE4")),
|
|
flight_mode5 (FLIGHT_MODE_5, k_param_flight_mode5, PSTR("FLTMODE5")),
|
|
flight_mode6 (FLIGHT_MODE_6, k_param_flight_mode6, PSTR("FLTMODE6")),
|
|
|
|
pitch_max (PITCH_MAX * 100, k_param_pitch_max, PSTR("PITCH_MAX")),
|
|
|
|
log_bitmask (MASK_LOG_SET_DEFAULTS, k_param_log_bitmask, PSTR("LOG_BITMASK")),
|
|
RTL_altitude (ALT_HOLD_HOME * 100, k_param_RTL_altitude, PSTR("ALT_HOLD_RTL")),
|
|
esc_calibrate (0, k_param_esc_calibrate, PSTR("ESC")),
|
|
frame_orientation (FRAME_ORIENTATION, k_param_frame_orientation, PSTR("FRAME")),
|
|
top_bottom_ratio (TOP_BOTTOM_RATIO, k_param_top_bottom_ratio, PSTR("TB_RATIO")),
|
|
|
|
#if FRAME_CONFIG == HELI_FRAME
|
|
heli_servo_1 (k_param_heli_servo_1, PSTR("HS1_")),
|
|
heli_servo_2 (k_param_heli_servo_2, PSTR("HS2_")),
|
|
heli_servo_3 (k_param_heli_servo_3, PSTR("HS3_")),
|
|
heli_servo_4 (k_param_heli_servo_4, PSTR("HS4_")),
|
|
heli_servo1_pos (-60, k_param_heli_servo1_pos, PSTR("SV1_POS_")),
|
|
heli_servo2_pos (60, k_param_heli_servo2_pos, PSTR("SV2_POS_")),
|
|
heli_servo3_pos (180, k_param_heli_servo3_pos, PSTR("SV3_POS_")),
|
|
heli_roll_max (4500, k_param_heli_roll_max, PSTR("ROL_MAX_")),
|
|
heli_pitch_max (4500, k_param_heli_pitch_max, PSTR("PIT_MAX_")),
|
|
heli_coll_min (1000, k_param_heli_collective_min, PSTR("COL_MIN_")),
|
|
heli_coll_max (2000, k_param_heli_collective_max, PSTR("COL_MAX_")),
|
|
heli_coll_mid (1500, k_param_heli_collective_mid, PSTR("COL_MID_")),
|
|
heli_ext_gyro_enabled (0, k_param_heli_ext_gyro_enabled, PSTR("GYR_ENABLE_")),
|
|
heli_ext_gyro_gain (1000, k_param_heli_ext_gyro_gain, PSTR("GYR_GAIN_")),
|
|
#endif
|
|
|
|
// RC channel group key name
|
|
//----------------------------------------------------------------------
|
|
rc_1 (k_param_rc_1, PSTR("RC1_")),
|
|
rc_2 (k_param_rc_2, PSTR("RC2_")),
|
|
rc_3 (k_param_rc_3, PSTR("RC3_")),
|
|
rc_4 (k_param_rc_4, PSTR("RC4_")),
|
|
rc_5 (k_param_rc_5, PSTR("RC5_")),
|
|
rc_6 (k_param_rc_6, PSTR("RC6_")),
|
|
rc_7 (k_param_rc_7, PSTR("RC7_")),
|
|
rc_8 (k_param_rc_8, PSTR("RC8_")),
|
|
rc_camera_pitch (k_param_rc_9, PSTR("RC_CP_")),
|
|
rc_camera_roll (k_param_rc_10, PSTR("RC_CR_")),
|
|
|
|
// PID controller group key name initial P initial I initial D initial imax
|
|
//--------------------------------------------------------------------------------------------------------------------------------------------------------------------
|
|
pid_rate_roll (k_param_pid_rate_roll, PSTR("RATE_RLL_"), RATE_ROLL_P, RATE_ROLL_I, 0, RATE_ROLL_IMAX * 100),
|
|
pid_rate_pitch (k_param_pid_rate_pitch, PSTR("RATE_PIT_"), RATE_PITCH_P, RATE_PITCH_I, 0, RATE_PITCH_IMAX * 100),
|
|
pid_rate_yaw (k_param_pid_rate_yaw, PSTR("RATE_YAW_"), RATE_YAW_P, RATE_YAW_I, 0, RATE_YAW_IMAX * 100),
|
|
|
|
pid_stabilize_roll (k_param_pid_stabilize_roll, PSTR("STB_RLL_"), STABILIZE_ROLL_P, STABILIZE_ROLL_I, 0, STABILIZE_ROLL_IMAX * 100),
|
|
pid_stabilize_pitch (k_param_pid_stabilize_pitch, PSTR("STB_PIT_"), STABILIZE_PITCH_P, STABILIZE_PITCH_I, 0, STABILIZE_PITCH_IMAX * 100),
|
|
pid_stabilize_yaw (k_param_pid_stabilize_yaw, PSTR("STB_YAW_"), STABILIZE_YAW_P, STABILIZE_YAW_I, 0, STABILIZE_YAW_IMAX * 100),
|
|
|
|
pid_nav_lat (k_param_pid_nav_lat, PSTR("NAV_LAT_"), NAV_LOITER_P, NAV_LOITER_I, NAV_LOITER_D, NAV_LOITER_IMAX * 100),
|
|
pid_nav_lon (k_param_pid_nav_lon, PSTR("NAV_LON_"), NAV_LOITER_P, NAV_LOITER_I, NAV_LOITER_D, NAV_LOITER_IMAX * 100),
|
|
pid_nav_wp (k_param_pid_nav_wp, PSTR("NAV_WP_"), NAV_WP_P, NAV_WP_I, NAV_WP_D, NAV_WP_IMAX * 100),
|
|
|
|
pid_throttle (k_param_pid_throttle, PSTR("THR_BAR_"), THROTTLE_P, THROTTLE_I, THROTTLE_D, THROTTLE_IMAX),
|
|
pid_crosstrack (k_param_pid_crosstrack, PSTR("XTRACK_"), XTRACK_P, XTRACK_I, XTRACK_D, XTRACK_IMAX),
|
|
|
|
|
|
junk(0) // XXX just so that we can add things without worrying about the trailing comma
|
|
{
|
|
}
|
|
};
|
|
|
|
#endif // PARAMETERS_H
|