ardupilot/libraries/AP_Soaring/AP_Soaring.cpp

336 lines
12 KiB
C++

#include "AP_Soaring.h"
#include <GCS_MAVLink/GCS.h>
#include <stdint.h>
extern const AP_HAL::HAL& hal;
// ArduSoar parameters
const AP_Param::GroupInfo SoaringController::var_info[] = {
// @Param: ENABLE
// @DisplayName: Is the soaring mode enabled or not
// @Description: Toggles the soaring mode on and off
// @Values: 0:Disable,1:Enable
// @User: Advanced
AP_GROUPINFO_FLAGS("ENABLE", 1, SoaringController, soar_active, 0, AP_PARAM_FLAG_ENABLE),
// @Param: VSPEED
// @DisplayName: Vertical v-speed
// @Description: Rate of climb to trigger themalling speed
// @Units: m/s
// @Range: 0 10
// @User: Advanced
AP_GROUPINFO("VSPEED", 2, SoaringController, thermal_vspeed, 0.7f),
// @Param: Q1
// @DisplayName: Process noise
// @Description: Standard deviation of noise in process for strength
// @Units:
// @Range: 0 10
// @User: Advanced
AP_GROUPINFO("Q1", 3, SoaringController, thermal_q1, 0.001f),
// @Param: Q2
// @DisplayName: Process noise
// @Description: Standard deviation of noise in process for position and radius
// @Units:
// @Range: 0 10
// @User: Advanced
AP_GROUPINFO("Q2", 4, SoaringController, thermal_q2, 0.03f),
// @Param: R
// @DisplayName: Measurement noise
// @Description: Standard deviation of noise in measurement
// @Units:
// @Range: 0 10
// @User: Advanced
AP_GROUPINFO("R", 5, SoaringController, thermal_r, 0.45f),
// @Param: DIST_AHEAD
// @DisplayName: Distance to thermal center
// @Description: Initial guess of the distance to the thermal center
// @Units: m
// @Range: 0 100
// @User: Advanced
AP_GROUPINFO("DIST_AHEAD", 6, SoaringController, thermal_distance_ahead, 5.0f),
// @Param: MIN_THML_S
// @DisplayName: Minimum thermalling time
// @Description: Minimum number of seconds to spend thermalling
// @Units: s
// @Range: 0 32768
// @User: Advanced
AP_GROUPINFO("MIN_THML_S", 7, SoaringController, min_thermal_s, 20),
// @Param: MIN_CRSE_S
// @DisplayName: Minimum cruising time
// @Description: Minimum number of seconds to spend cruising
// @Units: s
// @Range: 0 32768
// @User: Advanced
AP_GROUPINFO("MIN_CRSE_S", 8, SoaringController, min_cruise_s, 30),
// @Param: POLAR_CD0
// @DisplayName: Zero lift drag coef.
// @Description: Zero lift drag coefficient
// @Units:
// @Range: 0 0.5
// @User: Advanced
AP_GROUPINFO("POLAR_CD0", 9, SoaringController, polar_CD0, 0.027),
// @Param: POLAR_B
// @DisplayName: Induced drag coeffient
// @Description: Induced drag coeffient
// @Units:
// @Range: 0 0.5
// @User: Advanced
AP_GROUPINFO("POLAR_B", 10, SoaringController, polar_B, 0.031),
// @Param: POLAR_K
// @DisplayName: Cl factor
// @Description: Cl factor 2*m*g/(rho*S)
// @Units: m.m/s/s
// @Range: 0 0.5
// @User: Advanced
AP_GROUPINFO("POLAR_K", 11, SoaringController, polar_K, 25.6),
// @Param: ALT_MAX
// @DisplayName: Maximum soaring altitude, relative to the home location
// @Description: Don't thermal any higher than this.
// @Units: m
// @Range: 0 1000.0
// @User: Advanced
AP_GROUPINFO("ALT_MAX", 12, SoaringController, alt_max, 350.0),
// @Param: ALT_MIN
// @DisplayName: Minimum soaring altitude, relative to the home location
// @Description: Don't get any lower than this.
// @Units: m
// @Range: 0 1000.0
// @User: Advanced
AP_GROUPINFO("ALT_MIN", 13, SoaringController, alt_min, 50.0),
// @Param: ALT_CUTOFF
// @DisplayName: Maximum power altitude, relative to the home location
// @Description: Cut off throttle at this alt.
// @Units: m
// @Range: 0 1000.0
// @User: Advanced
AP_GROUPINFO("ALT_CUTOFF", 14, SoaringController, alt_cutoff, 250.0),
// @Param: ENABLE_CH
// @DisplayName: (Optional) RC channel that toggles the soaring controller on and off
// @Description: Toggles the soaring controller on and off. This parameter has any effect only if SOAR_ENABLE is set to 1 and this parameter is set to a valid non-zero channel number. When set, soaring will be activated when RC input to the specified channel is greater than or equal to 1700.
// @Range: 0 16
// @User: Advanced
AP_GROUPINFO("ENABLE_CH", 15, SoaringController, soar_active_ch, 0),
AP_GROUPEND
};
SoaringController::SoaringController(AP_AHRS &ahrs, AP_SpdHgtControl &spdHgt, const AP_Vehicle::FixedWing &parms) :
_ahrs(ahrs),
_spdHgt(spdHgt),
_vario(ahrs,parms),
_loiter_rad(parms.loiter_radius),
_throttle_suppressed(true)
{
AP_Param::setup_object_defaults(this, var_info);
}
void SoaringController::get_target(Location &wp)
{
wp = _prev_update_location;
wp.offset(_ekf.X[2], _ekf.X[3]);
}
bool SoaringController::suppress_throttle()
{
float alt = 0;
get_altitude_wrt_home(&alt);
if (_throttle_suppressed && (alt < alt_min)) {
// Time to throttle up
_throttle_suppressed = false;
} else if ((!_throttle_suppressed) && (alt > alt_cutoff)) {
// Start glide
_throttle_suppressed = true;
// Zero the pitch integrator - the nose is currently raised to climb, we need to go back to glide.
_spdHgt.reset_pitch_I();
_cruise_start_time_us = AP_HAL::micros64();
// Reset the filtered vario rate - it is currently elevated due to the climb rate and would otherwise take a while to fall again,
// leading to false positives.
_vario.filtered_reading = 0;
}
return _throttle_suppressed;
}
bool SoaringController::check_thermal_criteria()
{
return (soar_active
&& ((AP_HAL::micros64() - _cruise_start_time_us) > ((unsigned)min_cruise_s * 1e6))
&& _vario.filtered_reading > thermal_vspeed
&& _vario.alt < alt_max
&& _vario.alt > alt_min);
}
bool SoaringController::check_cruise_criteria()
{
float thermalability = (_ekf.X[0]*expf(-powf(_loiter_rad / _ekf.X[1], 2))) - EXPECTED_THERMALLING_SINK;
float alt = _vario.alt;
if (soar_active && (AP_HAL::micros64() - _thermal_start_time_us) > ((unsigned)min_thermal_s * 1e6) && thermalability < McCready(alt)) {
gcs().send_text(MAV_SEVERITY_INFO, "Thermal weak, recommend quitting: W %f R %f th %f alt %f Mc %f", (double)_ekf.X[0], (double)_ekf.X[1], (double)thermalability, (double)alt, (double)McCready(alt));
return true;
} else if (soar_active && (alt>alt_max || alt<alt_min)) {
gcs().send_text(MAV_SEVERITY_ALERT, "Out of allowable altitude range, beginning cruise. Alt = %f", (double)alt);
return true;
}
return false;
}
bool SoaringController::check_init_thermal_criteria()
{
if (soar_active && (AP_HAL::micros64() - _thermal_start_time_us) < ((unsigned)min_thermal_s * 1e6)) {
return true;
}
return false;
}
void SoaringController::init_thermalling()
{
// Calc filter matrices - so that changes to parameters can be updated by switching in and out of thermal mode
float r = powf(thermal_r, 2);
float cov_q1 = powf(thermal_q1, 2); // State covariance
float cov_q2 = powf(thermal_q2, 2); // State covariance
const float init_q[4] = {cov_q1, cov_q2, cov_q2, cov_q2};
const MatrixN<float,4> q{init_q};
const float init_p[4] = {INITIAL_STRENGTH_COVARIANCE, INITIAL_RADIUS_COVARIANCE, INITIAL_POSITION_COVARIANCE, INITIAL_POSITION_COVARIANCE};
const MatrixN<float,4> p{init_p};
// New state vector filter will be reset. Thermal location is placed in front of a/c
const float init_xr[4] = {INITIAL_THERMAL_STRENGTH,
INITIAL_THERMAL_RADIUS,
thermal_distance_ahead * cosf(_ahrs.yaw),
thermal_distance_ahead * sinf(_ahrs.yaw)};
const VectorN<float,4> xr{init_xr};
// Also reset covariance matrix p so filter is not affected by previous data
_ekf.reset(xr, p, q, r);
_ahrs.get_position(_prev_update_location);
_prev_update_time = AP_HAL::micros64();
_thermal_start_time_us = AP_HAL::micros64();
}
void SoaringController::init_cruising()
{
if (is_active() && suppress_throttle()) {
_cruise_start_time_us = AP_HAL::micros64();
// Start glide. Will be updated on the next loop.
_throttle_suppressed = true;
}
}
void SoaringController::get_wind_corrected_drift(const Location *current_loc, const Vector3f *wind, float *wind_drift_x, float *wind_drift_y, float *dx, float *dy)
{
Vector2f diff = location_diff(_prev_update_location, *current_loc); // get distances from previous update
*dx = diff.x;
*dy = diff.y;
// Wind correction
*wind_drift_x = wind->x * (AP_HAL::micros64() - _prev_update_time) * 1e-6;
*wind_drift_y = wind->y * (AP_HAL::micros64() - _prev_update_time) * 1e-6;
*dx -= *wind_drift_x;
*dy -= *wind_drift_y;
}
void SoaringController::get_altitude_wrt_home(float *alt)
{
_ahrs.get_relative_position_D_home(*alt);
*alt *= -1.0f;
}
void SoaringController::update_thermalling()
{
struct Location current_loc;
_ahrs.get_position(current_loc);
if (_vario.new_data) {
float dx = 0;
float dy = 0;
float dx_w = 0;
float dy_w = 0;
Vector3f wind = _ahrs.wind_estimate();
get_wind_corrected_drift(&current_loc, &wind, &dx_w, &dy_w, &dx, &dy);
#if (0)
// Print32_t filter info for debugging
int32_t i;
for (i = 0; i < 4; i++) {
gcs().send_text(MAV_SEVERITY_INFO, "%e ", (double)_ekf.P[i][i]);
}
for (i = 0; i < 4; i++) {
gcs().send_text(MAV_SEVERITY_INFO, "%e ", (double)_ekf.X[i]);
}
#endif
// write log - save the data.
AP::logger().Write("SOAR", "TimeUS,nettorate,dx,dy,x0,x1,x2,x3,lat,lng,alt,dx_w,dy_w", "QfffffffLLfff",
AP_HAL::micros64(),
(double)_vario.reading,
(double)dx,
(double)dy,
(double)_ekf.X[0],
(double)_ekf.X[1],
(double)_ekf.X[2],
(double)_ekf.X[3],
current_loc.lat,
current_loc.lng,
(double)_vario.alt,
(double)dx_w,
(double)dy_w);
//log_data();
_ekf.update(_vario.reading,dx, dy); // update the filter
_prev_update_location = current_loc; // save for next time
_prev_update_time = AP_HAL::micros64();
_vario.new_data = false;
}
}
void SoaringController::update_cruising()
{
// Reserved for future tasks that need to run continuously while in FBWB or AUTO mode,
// for example, calculation of optimal airspeed and flap angle.
}
void SoaringController::update_vario()
{
_vario.update(polar_K, polar_CD0, polar_B);
}
float SoaringController::McCready(float alt)
{
// A method shell to be filled in later
return thermal_vspeed;
}
bool SoaringController::is_active() const
{
if (!soar_active) {
return false;
}
if (soar_active_ch <= 0) {
// no activation channel
return true;
}
// active when above 1700
return RC_Channels::get_radio_in(soar_active_ch-1) >= 1700;
}