Andrew Tridgell 999919424b hwdef: allow for MCO pin to be configured ... this allows for hwdef.dat lines like this: PA8 MCO1 RCC PC9 MCO2 RCC you can control the scaling by defining the following: - STM32_MCO1SEL - STM32_MCO1PRE_VALUE - STM32_MCO2SEL - STM32_MCO2PRE_VALUE		2023-08-25 07:37:12 +10:00
..
hwdef	hwdef: allow for MCO pin to be configured	2023-08-25 07:37:12 +10:00
AP_HAL_ChibiOS.h	…
AP_HAL_ChibiOS_Namespace.h	…
AP_HAL_ChibiOS_Private.h	…
AnalogIn.cpp	HAL_ChibiOS: fixed asserts in AnalogIn driver	2023-05-06 07:24:58 +10:00
AnalogIn.h	HAL_ChibiOS: fixed asserts in AnalogIn driver	2023-05-06 07:24:58 +10:00
CANFDIface.cpp	HAL_ChibiOS: disable CANFD bits if CANFD not enabled	2023-07-12 18:54:45 +10:00
CANFDIface.h	…
CANIface.h	…
CanIface.cpp	HAL_ChibiOS: don't consider a MAVCAN send failure as a send failure	2023-06-08 10:15:50 +10:00
DSP.cpp	…
DSP.h	…
Device.cpp	…
Device.h	…
EventSource.cpp	…
EventSource.h	…
Flash.h	…
GPIO.cpp	…
GPIO.h	…
HAL_ChibiOS_Class.cpp	HAL_ChibiOS: revert recent USB changes	2023-06-03 16:50:30 +10:00
HAL_ChibiOS_Class.h	…
I2CDevice.cpp	…
I2CDevice.h	…
LogStructure.h	…
RCInput.cpp	AP_HAL_ChibiOS: add and use AP_RCPROTOCOL_ENABLED	2023-05-16 09:16:37 +10:00
RCInput.h	…
RCOutput.cpp	AP_HAL_ChibiOS: explicitly set dshot rate when using iomcu	2023-08-15 06:53:48 +10:00
RCOutput.h	HAL_ChibiOS: removed ESC scaling, moved to AP_HAL	2023-08-24 13:06:40 +10:00
RCOutput_bdshot.cpp	AP_HAL_ChibiOS: use unsigned math as appropriate	2023-06-27 09:28:33 +10:00
RCOutput_serial.cpp	AP_HAL_ChibiOS: ensure reverse and reversible masks are applied to iomcu	2023-08-15 06:53:48 +10:00
SPIDevice.cpp	…
SPIDevice.h	…
Scheduler.cpp	AP_HAL_ChibiOS: improve gating of use of AP_InternalError library	2023-08-17 09:16:46 +10:00
Scheduler.h	HAL_ChibiOS: support recovery from a mutex deadlock	2023-06-27 10:11:46 +10:00
Semaphores.cpp	…
Semaphores.h	…
SoftSigReader.cpp	…
SoftSigReader.h	…
SoftSigReaderInt.cpp	…
SoftSigReaderInt.h	…
Storage.cpp	…
Storage.h	…
UARTDriver.cpp	HAL_ChibiOS: added a method for just changing port owner	2023-08-02 17:44:39 +10:00
UARTDriver.h	HAL_ChibiOS: moved uart locking up to AP_HAL	2023-07-12 17:06:02 +10:00
Util.cpp	AP_HAL_ChibiOS: add support for DShot on IOMCU	2023-08-15 06:53:48 +10:00
Util.h	AP_HAL_ChibiOS: add support for get_persistent_param_by_name	2023-06-17 14:49:22 +10:00
WSPIDevice.cpp	AP_HAL_ChibiOS: correct OSPI clock in WSPIDevice	2023-04-28 08:31:15 +10:00
WSPIDevice.h	AP_HAL_ChibiOS: support is_busy() on WSPI device	2023-04-28 08:31:15 +10:00
bxcan.hpp	…
sdcard.cpp	HAL_ChibiOS: revert recent USB changes	2023-06-03 16:50:30 +10:00
sdcard.h	…
shared_dma.cpp	…
shared_dma.h	…
stdio.cpp	…
system.cpp	AP_HAL_ChibiOS: removed native_millis/micros	2023-08-24 13:06:40 +10:00