mirror of https://github.com/ArduPilot/ardupilot
93 lines
2.8 KiB
C++
93 lines
2.8 KiB
C++
#include "Blimp.h"
|
|
|
|
#define ARM_DELAY 20 // called at 10hz so 2 seconds
|
|
#define DISARM_DELAY 20 // called at 10hz so 2 seconds
|
|
#define AUTO_TRIM_DELAY 100 // called at 10hz so 10 seconds
|
|
#define LOST_VEHICLE_DELAY 10 // called at 10hz so 1 second
|
|
|
|
// arm_motors_check - checks for pilot input to arm or disarm the blimp
|
|
// called at 10hz
|
|
void Blimp::arm_motors_check()
|
|
{
|
|
static int16_t arming_counter;
|
|
|
|
// check if arming/disarm using rudder is allowed
|
|
AP_Arming::RudderArming arming_rudder = arming.get_rudder_arming_type();
|
|
if (arming_rudder == AP_Arming::RudderArming::IS_DISABLED) {
|
|
return;
|
|
}
|
|
|
|
// ensure throttle is down
|
|
if (channel_up->get_control_in() > 0) { //MIR what dow we do with this?
|
|
arming_counter = 0;
|
|
return;
|
|
}
|
|
|
|
int16_t yaw_in = channel_yaw->get_control_in();
|
|
|
|
// full right
|
|
if (yaw_in > 900) {
|
|
|
|
// increase the arming counter to a maximum of 1 beyond the auto trim counter
|
|
if (arming_counter <= AUTO_TRIM_DELAY) {
|
|
arming_counter++;
|
|
}
|
|
|
|
// arm the motors and configure for flight
|
|
if (arming_counter == ARM_DELAY && !motors->armed()) {
|
|
// reset arming counter if arming fail
|
|
if (!arming.arm(AP_Arming::Method::RUDDER)) {
|
|
arming_counter = 0;
|
|
}
|
|
}
|
|
|
|
// arm the motors and configure for flight
|
|
if (arming_counter == AUTO_TRIM_DELAY && motors->armed() && control_mode == Mode::Number::MANUAL) {
|
|
gcs().send_text(MAV_SEVERITY_INFO, "AutoTrim start");
|
|
auto_trim_counter = 250;
|
|
auto_trim_started = false;
|
|
}
|
|
|
|
// full left and rudder disarming is enabled
|
|
} else if ((yaw_in < -900) && (arming_rudder == AP_Arming::RudderArming::ARMDISARM)) {
|
|
if (!flightmode->has_manual_throttle() && !ap.land_complete) {
|
|
arming_counter = 0;
|
|
return;
|
|
}
|
|
|
|
// increase the counter to a maximum of 1 beyond the disarm delay
|
|
if (arming_counter <= DISARM_DELAY) {
|
|
arming_counter++;
|
|
}
|
|
|
|
// disarm the motors
|
|
if (arming_counter == DISARM_DELAY && motors->armed()) {
|
|
arming.disarm(AP_Arming::Method::RUDDER);
|
|
}
|
|
|
|
// Yaw is centered so reset arming counter
|
|
} else {
|
|
arming_counter = 0;
|
|
}
|
|
}
|
|
|
|
|
|
// motors_output - send output to motors library which will adjust and send to ESCs and servos
|
|
void Blimp::motors_output()
|
|
{
|
|
// output any servo channels
|
|
SRV_Channels::calc_pwm();
|
|
|
|
// cork now, so that all channel outputs happen at once
|
|
SRV_Channels::cork();
|
|
|
|
// update output on any aux channels, for manual passthru
|
|
SRV_Channels::output_ch_all();
|
|
|
|
// send output signals to motors
|
|
motors->output();
|
|
|
|
// push all channels
|
|
AP::srv().push();
|
|
}
|