mirror of https://github.com/ArduPilot/ardupilot
85 lines
2.0 KiB
Plaintext
85 lines
2.0 KiB
Plaintext
/*
|
|
LiquidCrystal Library - Hello World
|
|
|
|
Demonstrates the use a 16x2 LCD display. The LiquidCrystal
|
|
library works with all LCD displays that are compatible with the
|
|
Hitachi HD44780 driver. There are many of them out there, and you
|
|
can usually tell them by the 16-pin interface.
|
|
|
|
This sketch prints "Hello World!" to the LCD
|
|
and shows the time.
|
|
|
|
The circuit:
|
|
* LCD RS pin to digital pin 12
|
|
* LCD Enable pin to digital pin 11
|
|
* LCD D4 pin to digital pin 5
|
|
* LCD D5 pin to digital pin 4
|
|
* LCD D6 pin to digital pin 3
|
|
* LCD D7 pin to digital pin 2
|
|
* LCD R/W pin to ground
|
|
* 10K resistor:
|
|
* ends to +5V and ground
|
|
* wiper to LCD VO pin (pin 3)
|
|
|
|
Library originally added 18 Apr 2008
|
|
by David A. Mellis
|
|
library modified 5 Jul 2009
|
|
by Limor Fried (http://www.ladyada.net)
|
|
example added 9 Jul 2009
|
|
by Tom Igoe
|
|
modified 22 Nov 2010
|
|
by Tom Igoe
|
|
|
|
This example code is in the public domain.
|
|
|
|
http://www.arduino.cc/en/Tutorial/LiquidCrystal
|
|
*/
|
|
|
|
// include the library code:
|
|
|
|
#include <AP_Common.h>
|
|
#include <AP_Math.h>
|
|
#include <AP_Param.h>
|
|
#include <AP_Progmem.h>
|
|
|
|
#include <AP_HAL.h>
|
|
#include <AP_HAL_AVR.h>
|
|
|
|
#include "LCrystal.h"
|
|
|
|
#if CONFIG_HAL_BOARD == HAL_BOARD_APM2
|
|
const AP_HAL::HAL& hal = AP_HAL_AVR_APM2;
|
|
#elif CONFIG_HAL_BOARD == HAL_BOARD_APM1
|
|
const AP_HAL::HAL& hal = AP_HAL_AVR_APM1;
|
|
#endif
|
|
|
|
// initialize the library with the numbers of the interface pins
|
|
LiquidCrystal lcd(8, 9, 4, 5, 6, 7);
|
|
|
|
void setup() {
|
|
/* pin 54 is A0 on the mega */
|
|
hal.gpio->pinMode(54, GPIO_INPUT);
|
|
// set up the LCD's number of columns and rows:
|
|
lcd.begin(16, 2);
|
|
// Print a message to the LCD.
|
|
lcd.print("hello, world!");
|
|
}
|
|
|
|
void loop() {
|
|
// set the cursor to column 0, line 1
|
|
// (note: line 1 is the second row, since counting begins with 0):
|
|
lcd.setCursor(0, 1);
|
|
// print the number of seconds since reset:
|
|
lcd.print(hal.scheduler->millis()/1000);
|
|
|
|
|
|
lcd.setCursor(8, 1); /* Halfway over second row */
|
|
if (hal.gpio->read(54)) {
|
|
lcd.print("high");
|
|
} else {
|
|
lcd.print("low ");
|
|
}
|
|
}
|
|
|
|
AP_HAL_MAIN();
|