mirror of https://github.com/ArduPilot/ardupilot
131 lines
5.0 KiB
C
131 lines
5.0 KiB
C
/*
|
|
* This file is free software: you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
* See the GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*
|
|
* This board that does not contain any sensors (but pins are active), it is a great help for a novice user,
|
|
* by flashing an empty board, you can connect via Mavlink (Mission Planner - MP) and gradually add sensors.
|
|
* If you had some sensor configured and it doesn't work then the MP connection does not work and then you may not know what to do next.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#define HAL_ESP32_BOARD_NAME "esp32-empty"
|
|
|
|
#define TRUE 1
|
|
#define FALSE 0
|
|
|
|
//Protocols
|
|
//list of protocols/enum: ardupilot/libraries/AP_SerialManager/AP_SerialManager.h
|
|
//default protocols: ardupilot/libraries/AP_SerialManager/AP_SerialManager.cpp
|
|
//ESP32 serials: AP_HAL_ESP32/HAL_ESP32_Class.cpp
|
|
|
|
//#define DEFAULT_SERIAL0_PROTOCOL SerialProtocol_MAVLink2 //A UART0: Always: Console, MAVLink2
|
|
//#define DEFAULT_SERIAL0_BAUD AP_SERIALMANAGER_CONSOLE_BAUD/1000 //115200
|
|
|
|
//#define DEFAULT_SERIAL1_PROTOCOL SerialProtocol_MAVLink2 //C WiFi: TCP, UDP, or disable (depends on HAL_ESP32_WIFI)
|
|
//#define DEFAULT_SERIAL1_BAUD AP_SERIALMANAGER_MAVLINK_BAUD/1000 //57600
|
|
|
|
#define DEFAULT_SERIAL2_PROTOCOL SerialProtocol_MAVLink2 //D UART2: Always: MAVLink2 on ESP32
|
|
//#define DEFAULT_SERIAL2_BAUD AP_SERIALMANAGER_MAVLINK_BAUD/1000 //57600
|
|
|
|
#define DEFAULT_SERIAL3_PROTOCOL SerialProtocol_GPS //B UART1: GPS1
|
|
//#define DEFAULT_SERIAL4_BAUD AP_SERIALMANAGER_GPS_BAUD/1000 //38400, Can not define default baudrate here (by config only)
|
|
|
|
#define DEFAULT_SERIAL4_PROTOCOL SerialProtocol_None //E
|
|
//#define DEFAULT_SERIAL4_BAUD AP_SERIALMANAGER_GPS_BAUD/1000 //38400, Can not define default baudrate here (by config only)
|
|
|
|
#define DEFAULT_SERIAL5_PROTOCOL SerialProtocol_None //F
|
|
#define DEFAULT_SERIAL5_BAUD (115200/1000)
|
|
|
|
#define DEFAULT_SERIAL6_PROTOCOL SerialProtocol_None //G
|
|
#define DEFAULT_SERIAL6_BAUD (115200/1000)
|
|
|
|
#define DEFAULT_SERIAL7_PROTOCOL SerialProtocol_None //H
|
|
#define DEFAULT_SERIAL7_BAUD (115200/1000)
|
|
|
|
#define DEFAULT_SERIAL8_PROTOCOL SerialProtocol_None //I
|
|
#define DEFAULT_SERIAL8_BAUD (115200/1000)
|
|
|
|
#define DEFAULT_SERIAL9_PROTOCOL SerialProtocol_None //J
|
|
#define DEFAULT_SERIAL9_BAUD (115200/1000)
|
|
|
|
//Inertial sensors
|
|
//#define HAL_INS_DEFAULT HAL_INS_MPU9250_I2C
|
|
//#define PROBE_IMU_I2C(driver, bus, addr, args ...) ADD_BACKEND(AP_InertialSensor_ ## driver::probe(*this,GET_I2C_DEVICE(bus, addr),##args))
|
|
//#define HAL_INS_PROBE_LIST PROBE_IMU_I2C(Invensense, 0, 0x68, ROTATION_NONE)
|
|
|
|
//I2C Buses
|
|
#define HAL_ESP32_I2C_BUSES {.port=I2C_NUM_0, .sda=GPIO_NUM_13, .scl=GPIO_NUM_14, .speed=400*KHZ, .internal=true, .soft=true}
|
|
|
|
//SPI Buses
|
|
#define HAL_ESP32_SPI_BUSES {}
|
|
|
|
//SPI Devices
|
|
#define HAL_ESP32_SPI_DEVICES {}
|
|
|
|
//RCIN
|
|
#define HAL_ESP32_RCIN GPIO_NUM_36
|
|
|
|
//RCOUT
|
|
#define HAL_ESP32_RCOUT { GPIO_NUM_25, GPIO_NUM_27, GPIO_NUM_33, GPIO_NUM_32, GPIO_NUM_22, GPIO_NUM_21 }
|
|
|
|
//BAROMETER
|
|
#define HAL_BARO_ALLOW_INIT_NO_BARO 1
|
|
|
|
//COMPASS
|
|
#define ALLOW_ARM_NO_COMPASS
|
|
|
|
//WIFI
|
|
#define HAL_ESP32_WIFI 1 //1-TCP, 2-UDP, comment this line = without wifi
|
|
#define WIFI_SSID "ardupilot-empty"
|
|
#define WIFI_PWD "ardupilot-empty"
|
|
|
|
//UARTs
|
|
#define HAL_ESP32_UART_DEVICES \
|
|
{.port=UART_NUM_0, .rx=GPIO_NUM_3 , .tx=GPIO_NUM_1 },\
|
|
{.port=UART_NUM_1, .rx=GPIO_NUM_34, .tx=GPIO_NUM_18},\
|
|
{.port=UART_NUM_2, .rx=GPIO_NUM_35, .tx=GPIO_NUM_19}
|
|
|
|
//ADC
|
|
#define HAL_DISABLE_ADC_DRIVER 1
|
|
#define HAL_USE_ADC 0
|
|
|
|
//LED
|
|
#define DEFAULT_NTF_LED_TYPES Notify_LED_None
|
|
|
|
//RMT pin number
|
|
#define HAL_ESP32_RMT_RX_PIN_NUMBER 4
|
|
|
|
//SD CARD
|
|
// Do u want to use mmc or spi mode for the sd card, this is board specific ,
|
|
// as mmc uses specific pins but is quicker,
|
|
// and spi is more flexible pinouts.... dont forget vspi/hspi should be selected to NOT conflict with HAL_ESP32_SPI_BUSES
|
|
|
|
//#define HAL_ESP32_SDCARD //after enabled, uncomment one of below
|
|
//#define HAL_ESP32_SDMMC
|
|
//#define HAL_ESP32_SDSPI {.host=VSPI_HOST, .dma_ch=2, .mosi=GPIO_NUM_2, .miso=GPIO_NUM_15, .sclk=GPIO_NUM_26, .cs=GPIO_NUM_21}
|
|
|
|
#define HAL_LOGGING_FILESYSTEM_ENABLED 0
|
|
#define HAL_LOGGING_DATAFLASH_ENABLED 0
|
|
#define HAL_LOGGING_MAVLINK_ENABLED 0
|
|
|
|
#define HAL_BOARD_LOG_DIRECTORY "/SDCARD/APM/LOGS"
|
|
#define HAL_BOARD_STORAGE_DIRECTORY "/SDCARD/APM/STORAGE"
|
|
#define HAL_BOARD_LOG_DIRECTORY "/SDCARD/APM/LOGS"
|
|
#define HAL_BOARD_TERRAIN_DIRECTORY "/SDCARD/APM/TERRAIN"
|
|
|
|
#define HAL_LOGGING_BACKENDS_DEFAULT 1
|
|
|