| .. |
|
examples/Airspeed
|
AP_Airspeed: add AP_AIRSPEED_ENABLED
|
2022-01-19 18:21:32 +11:00 |
|
models
|
AP_Airspeed: remove duplicated words from comments
|
2022-02-07 08:24:14 +09:00 |
|
AP_Airspeed.cpp
|
AP_Airspeed: correct metadata for params for non-Plane vehicles
|
2022-04-05 09:58:10 +10:00 |
|
AP_Airspeed.h
|
AP_Airspeed: disable AUTOCAL if airspeed is disabled
|
2022-03-15 08:52:37 +11:00 |
|
AP_Airspeed_ASP5033.cpp
|
AP_Airspeed: added DEVID parameters for airspeed
|
2021-07-12 17:14:59 +10:00 |
|
AP_Airspeed_ASP5033.h
|
AP_Airspeed: added ASP5033 driver
|
2021-03-28 07:50:34 +11:00 |
|
AP_Airspeed_Backend.cpp
|
AP_Airspeed: support 3 I2C addresses for MS4525
|
2021-07-12 17:14:59 +10:00 |
|
AP_Airspeed_Backend.h
|
AP_Airspeed: added ARSPD_OPTIONS bit for disabling voltage correction
|
2021-07-12 17:14:59 +10:00 |
|
AP_Airspeed_DLVR.cpp
|
AP_Airspeed: Sanity check DLVR raw data before accumulating it
|
2022-02-09 09:00:22 +11:00 |
|
AP_Airspeed_DLVR.h
|
AP_Airspeed: allow for an AIRSPEED list in hwdef.dat
|
2021-09-21 13:51:40 +10:00 |
|
AP_Airspeed_Health.cpp
|
AP_Airspeed: Health: use reading from correct airspeed sensor
|
2022-03-02 16:14:50 +11:00 |
|
AP_Airspeed_MS4525.cpp
|
AP_Airspeed: make MAV_SEVERITY levels higher
|
2021-11-03 18:06:48 -07:00 |
|
AP_Airspeed_MS4525.h
|
AP_Airspeed: support 3 I2C addresses for MS4525
|
2021-07-12 17:14:59 +10:00 |
|
AP_Airspeed_MS5525.cpp
|
AP_Airspeed: make MAV_SEVERITY levels higher
|
2021-11-03 18:06:48 -07:00 |
|
AP_Airspeed_MS5525.h
|
AP_Airspeed: removed #include duplicates
|
2019-01-03 09:40:50 +09:00 |
|
AP_Airspeed_MSP.cpp
|
AP_Airspeed: added DEVID parameters for airspeed
|
2021-07-12 17:14:59 +10:00 |
|
AP_Airspeed_MSP.h
|
AP_Airspeed: added MSP backend
|
2020-12-08 20:41:12 +11:00 |
|
AP_Airspeed_NMEA.cpp
|
AP_Airspeed: added DEVID parameters for airspeed
|
2021-07-12 17:14:59 +10:00 |
|
AP_Airspeed_NMEA.h
|
AP_Airspeed: add NMEA water speed backend
|
2020-10-27 11:24:49 +11:00 |
|
AP_Airspeed_SDP3X.cpp
|
AP_Airspeed: make C_TO_KELVIN a function macro; create KELVIN_TO_C
|
2022-01-13 18:31:46 +11:00 |
|
AP_Airspeed_SDP3X.h
|
AP_Airspeed: remove size warning on SDP3X crc function.
|
2020-10-14 07:52:02 +11:00 |
|
AP_Airspeed_UAVCAN.cpp
|
AP_Airspeed: make C_TO_KELVIN a function macro; create KELVIN_TO_C
|
2022-01-13 18:31:46 +11:00 |
|
AP_Airspeed_UAVCAN.h
|
AP_Airspeed: enable for use in AP_Periph
|
2019-10-21 19:12:01 +11:00 |
|
AP_Airspeed_analog.cpp
|
AP_Airspeed: analog: check valid pin
|
2021-10-06 18:42:51 +11:00 |
|
AP_Airspeed_analog.h
|
AP_Airspeed: support dual airspeed sensors
|
2018-01-16 07:14:20 +11:00 |
|
Airspeed_Calibration.cpp
|
AP_Airspeed: add inflight airspeed cal rc switch
|
2020-11-25 21:30:15 +11:00 |
fa81f7813c