ardupilot/libraries/AP_HAL_Linux/RCOutput_ZYNQ.cpp

97 lines
2.4 KiB
C++

#include <AP_HAL/AP_HAL.h>
#include "RCOutput_ZYNQ.h"
#include <dirent.h>
#include <fcntl.h>
#include <linux/spi/spidev.h>
#include <signal.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <unistd.h>
using namespace Linux;
#define PWM_CHAN_COUNT 8
#define RCOUT_ZYNQ_PWM_BASE 0x43c00000
#define PWM_CMD_CONFIG 0 /* full configuration in one go */
#define PWM_CMD_ENABLE 1 /* enable a pwm */
#define PWM_CMD_DISABLE 2 /* disable a pwm */
#define PWM_CMD_MODIFY 3 /* modify a pwm */
#define PWM_CMD_SET 4 /* set a pwm output explicitly */
#define PWM_CMD_CLR 5 /* clr a pwm output explicitly */
#define PWM_CMD_TEST 6 /* various crap */
static void catch_sigbus(int sig)
{
AP_HAL::panic("RCOutput.cpp:SIGBUS error gernerated\n");
}
void RCOutput_ZYNQ::init()
{
uint32_t mem_fd;
signal(SIGBUS,catch_sigbus);
mem_fd = open("/dev/mem", O_RDWR|O_SYNC);
sharedMem_cmd = (struct pwm_cmd *) mmap(0, 0x1000, PROT_READ|PROT_WRITE,
MAP_SHARED, mem_fd, RCOUT_ZYNQ_PWM_BASE);
close(mem_fd);
// all outputs default to 50Hz, the top level vehicle code
// overrides this when necessary
set_freq(0xFFFFFFFF, 50);
}
void RCOutput_ZYNQ::set_freq(uint32_t chmask, uint16_t freq_hz) //LSB corresponds to CHAN_1
{
uint8_t i;
unsigned long tick=TICK_PER_S/(unsigned long)freq_hz;
for (i=0;i<PWM_CHAN_COUNT;i++) {
if (chmask & (1U<<i)) {
sharedMem_cmd->periodhi[i].period=tick;
}
}
}
uint16_t RCOutput_ZYNQ::get_freq(uint8_t ch)
{
return TICK_PER_S/sharedMem_cmd->periodhi[ch].period;;
}
void RCOutput_ZYNQ::enable_ch(uint8_t ch)
{
// sharedMem_cmd->enmask |= 1U<<chan_pru_map[ch];
}
void RCOutput_ZYNQ::disable_ch(uint8_t ch)
{
// sharedMem_cmd->enmask &= !(1U<<chan_pru_map[ch]);
}
void RCOutput_ZYNQ::write(uint8_t ch, uint16_t period_us)
{
sharedMem_cmd->periodhi[ch].hi = TICK_PER_US*period_us;
}
uint16_t RCOutput_ZYNQ::read(uint8_t ch)
{
return (sharedMem_cmd->periodhi[ch].hi/TICK_PER_US);
}
void RCOutput_ZYNQ::read(uint16_t* period_us, uint8_t len)
{
uint8_t i;
if(len>PWM_CHAN_COUNT){
len = PWM_CHAN_COUNT;
}
for(i=0;i<len;i++){
period_us[i] = sharedMem_cmd->periodhi[i].hi/TICK_PER_US;
}
}