mirror of https://github.com/ArduPilot/ardupilot
452 lines
12 KiB
C
452 lines
12 KiB
C
/*
|
|
* This file is free software: you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
* See the GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "stm32_util.h"
|
|
#include <stdint.h>
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
#include <stm32_dma.h>
|
|
#include <hrt.h>
|
|
|
|
static int64_t utc_time_offset;
|
|
|
|
/*
|
|
setup the timer capture digital filter for a channel
|
|
*/
|
|
void stm32_timer_set_input_filter(stm32_tim_t *tim, uint8_t channel, uint8_t filter_mode)
|
|
{
|
|
switch (channel) {
|
|
case 0:
|
|
tim->CCMR1 |= STM32_TIM_CCMR1_IC1F(filter_mode);
|
|
break;
|
|
case 1:
|
|
tim->CCMR1 |= STM32_TIM_CCMR1_IC2F(filter_mode);
|
|
break;
|
|
case 2:
|
|
tim->CCMR2 |= STM32_TIM_CCMR2_IC3F(filter_mode);
|
|
break;
|
|
case 3:
|
|
tim->CCMR2 |= STM32_TIM_CCMR2_IC4F(filter_mode);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
set the input source of a timer channel
|
|
*/
|
|
void stm32_timer_set_channel_input(stm32_tim_t *tim, uint8_t channel, uint8_t input_source)
|
|
{
|
|
switch (channel) {
|
|
case 0:
|
|
tim->CCER &= ~STM32_TIM_CCER_CC1E;
|
|
tim->CCMR1 &= ~STM32_TIM_CCMR1_CC1S_MASK;
|
|
tim->CCMR1 |= STM32_TIM_CCMR1_CC1S(input_source);
|
|
tim->CCER |= STM32_TIM_CCER_CC1E;
|
|
break;
|
|
case 1:
|
|
tim->CCER &= ~STM32_TIM_CCER_CC2E;
|
|
tim->CCMR1 &= ~STM32_TIM_CCMR1_CC2S_MASK;
|
|
tim->CCMR1 |= STM32_TIM_CCMR1_CC2S(input_source);
|
|
tim->CCER |= STM32_TIM_CCER_CC2E;
|
|
break;
|
|
case 2:
|
|
tim->CCER &= ~STM32_TIM_CCER_CC3E;
|
|
tim->CCMR2 &= ~STM32_TIM_CCMR2_CC3S_MASK;
|
|
tim->CCMR2 |= STM32_TIM_CCMR2_CC3S(input_source);
|
|
tim->CCER |= STM32_TIM_CCER_CC3E;
|
|
break;
|
|
case 3:
|
|
tim->CCER &= ~STM32_TIM_CCER_CC4E;
|
|
tim->CCMR2 &= ~STM32_TIM_CCMR2_CC4S_MASK;
|
|
tim->CCMR2 |= STM32_TIM_CCMR2_CC4S(input_source);
|
|
tim->CCER |= STM32_TIM_CCER_CC4E;
|
|
break;
|
|
}
|
|
}
|
|
|
|
#if CH_DBG_ENABLE_STACK_CHECK == TRUE && !defined(HAL_BOOTLOADER_BUILD)
|
|
void show_stack_usage(void)
|
|
{
|
|
thread_t *tp;
|
|
|
|
tp = chRegFirstThread();
|
|
do {
|
|
uint32_t stklimit = (uint32_t)tp->wabase;
|
|
uint8_t *p = (uint8_t *)tp->wabase;
|
|
while (*p == CH_DBG_STACK_FILL_VALUE) {
|
|
p++;
|
|
}
|
|
uint32_t stack_left = ((uint32_t)p) - stklimit;
|
|
printf("%s %u\n", tp->name, (unsigned)stack_left);
|
|
tp = chRegNextThread(tp);
|
|
} while (tp != NULL);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
set the utc time
|
|
*/
|
|
void stm32_set_utc_usec(uint64_t time_utc_usec)
|
|
{
|
|
uint64_t now = hrt_micros64();
|
|
if (now <= time_utc_usec) {
|
|
utc_time_offset = time_utc_usec - now;
|
|
}
|
|
}
|
|
|
|
/*
|
|
get system clock in UTC microseconds
|
|
*/
|
|
uint64_t stm32_get_utc_usec()
|
|
{
|
|
return hrt_micros64() + utc_time_offset;
|
|
}
|
|
|
|
struct utc_tm {
|
|
uint8_t tm_year; // since 1900
|
|
uint8_t tm_mon; // zero based
|
|
uint8_t tm_mday; // zero based
|
|
uint8_t tm_hour;
|
|
uint8_t tm_min;
|
|
uint8_t tm_sec;
|
|
};
|
|
|
|
|
|
/*
|
|
return true if a year is a leap year
|
|
*/
|
|
static bool is_leap(uint32_t y)
|
|
{
|
|
y += 1900;
|
|
return (y % 4) == 0 && ((y % 100) != 0 || (y % 400) == 0);
|
|
}
|
|
|
|
static const uint8_t ndays[2][12] ={
|
|
{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31},
|
|
{31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}};
|
|
|
|
/*
|
|
parse a seconds since 1970 into a utc_tm structure
|
|
code based on _der_gmtime from samba
|
|
*/
|
|
static void parse_utc_seconds(uint64_t utc_sec, struct utc_tm *tm)
|
|
{
|
|
uint32_t secday = utc_sec % (3600U * 24U);
|
|
uint32_t days = utc_sec / (3600U * 24U);
|
|
|
|
memset(tm, 0, sizeof(*tm));
|
|
|
|
tm->tm_sec = secday % 60U;
|
|
tm->tm_min = (secday % 3600U) / 60U;
|
|
tm->tm_hour = secday / 3600U;
|
|
tm->tm_year = 70;
|
|
|
|
if (days > (2000 * 365)) {
|
|
// don't look for dates too far into the future
|
|
return;
|
|
}
|
|
|
|
while (true) {
|
|
unsigned dayinyear = (is_leap(tm->tm_year) ? 366 : 365);
|
|
if (days < dayinyear) {
|
|
break;
|
|
}
|
|
tm->tm_year += 1;
|
|
days -= dayinyear;
|
|
}
|
|
tm->tm_mon = 0;
|
|
|
|
while (true) {
|
|
unsigned daysinmonth = ndays[is_leap(tm->tm_year)?1:0][tm->tm_mon];
|
|
if (days < daysinmonth) {
|
|
break;
|
|
}
|
|
days -= daysinmonth;
|
|
tm->tm_mon++;
|
|
}
|
|
tm->tm_mday = days + 1;
|
|
}
|
|
|
|
|
|
/*
|
|
get time for fat filesystem. This is based on
|
|
rtcConvertDateTimeToFAT from the ChibiOS RTC driver. We don't use
|
|
the hw RTC clock as it is very inaccurate
|
|
*/
|
|
uint32_t get_fattime()
|
|
{
|
|
if (utc_time_offset == 0) {
|
|
// return a fixed time
|
|
return ((uint32_t)0 | (1 << 16)) | (1 << 21);
|
|
}
|
|
uint64_t utc_usec = stm32_get_utc_usec();
|
|
uint64_t utc_sec = utc_usec / 1000000UL;
|
|
struct utc_tm tm;
|
|
|
|
parse_utc_seconds(utc_sec, &tm);
|
|
|
|
uint32_t fattime;
|
|
|
|
fattime = tm.tm_sec >> 1U;
|
|
fattime |= tm.tm_min << 5U;
|
|
fattime |= tm.tm_hour << 11U;
|
|
fattime |= tm.tm_mday << 16U;
|
|
fattime |= (tm.tm_mon+1) << 21U;
|
|
fattime |= (uint32_t)((tm.tm_year-80) << 25U);
|
|
|
|
return fattime;
|
|
}
|
|
|
|
#if !defined(NO_FASTBOOT)
|
|
|
|
// get RTC backup registers starting at given idx
|
|
void get_rtc_backup(uint8_t idx, uint32_t *v, uint8_t n)
|
|
{
|
|
while (n--) {
|
|
#if defined(STM32F1)
|
|
__IO uint32_t *dr = (__IO uint32_t *)&BKP->DR1;
|
|
*v++ = (dr[n/2]&0xFFFF) | (dr[n/2+1]<<16);
|
|
#else
|
|
*v++ = ((__IO uint32_t *)&RTC->BKP0R)[idx++];
|
|
#endif
|
|
}
|
|
}
|
|
|
|
// set n RTC backup registers starting at given idx
|
|
void set_rtc_backup(uint8_t idx, const uint32_t *v, uint8_t n)
|
|
{
|
|
#if !defined(STM32F1)
|
|
if ((RCC->BDCR & RCC_BDCR_RTCEN) == 0) {
|
|
RCC->BDCR |= STM32_RTCSEL;
|
|
RCC->BDCR |= RCC_BDCR_RTCEN;
|
|
}
|
|
#ifdef PWR_CR_DBP
|
|
PWR->CR |= PWR_CR_DBP;
|
|
#else
|
|
PWR->CR1 |= PWR_CR1_DBP;
|
|
#endif
|
|
#endif
|
|
while (n--) {
|
|
#if defined(STM32F1)
|
|
__IO uint32_t *dr = (__IO uint32_t *)&BKP->DR1;
|
|
dr[n/2] = (*v) & 0xFFFF;
|
|
dr[n/2+1] = (*v) >> 16;
|
|
#else
|
|
((__IO uint32_t *)&RTC->BKP0R)[idx++] = *v++;
|
|
#endif
|
|
}
|
|
}
|
|
|
|
// see if RTC registers is setup for a fast reboot
|
|
enum rtc_boot_magic check_fast_reboot(void)
|
|
{
|
|
uint32_t v;
|
|
get_rtc_backup(0, &v, 1);
|
|
return (enum rtc_boot_magic)v;
|
|
}
|
|
|
|
// set RTC register for a fast reboot
|
|
void set_fast_reboot(enum rtc_boot_magic v)
|
|
{
|
|
if (check_fast_reboot() != v) {
|
|
uint32_t vv = (uint32_t)v;
|
|
set_rtc_backup(0, &vv, 1);
|
|
}
|
|
}
|
|
|
|
#else // NO_FASTBOOT
|
|
|
|
// set n RTC backup registers starting at given idx
|
|
void set_rtc_backup(uint8_t idx, const uint32_t *v, uint8_t n)
|
|
{
|
|
}
|
|
|
|
// get RTC backup registers starting at given idx
|
|
void get_rtc_backup(uint8_t idx, uint32_t *v, uint8_t n)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif // NO_FASTBOOT
|
|
|
|
/*
|
|
enable peripheral power if needed This is done late to prevent
|
|
problems with CTS causing SiK radios to stay in the bootloader. A
|
|
SiK radio will stay in the bootloader if CTS is held to GND on boot
|
|
*/
|
|
void peripheral_power_enable(void)
|
|
{
|
|
#if defined(HAL_GPIO_PIN_nVDD_5V_PERIPH_EN) || defined(HAL_GPIO_PIN_nVDD_5V_HIPOWER_EN) || defined(HAL_GPIO_PIN_VDD_3V3_SENSORS_EN) || defined(HAL_GPIO_PIN_nVDD_3V3_SD_CARD_EN) || defined(HAL_GPIO_PIN_VDD_3V3_SD_CARD_EN)
|
|
// we don't know what state the bootloader had the CTS pin in, so
|
|
// wait here with it pulled up from the PAL table for enough time
|
|
// for the radio to be definately powered down
|
|
uint8_t i;
|
|
for (i=0; i<100; i++) {
|
|
// use a loop as this may be a 16 bit timer
|
|
chThdSleep(chTimeMS2I(1));
|
|
}
|
|
#ifdef HAL_GPIO_PIN_nVDD_5V_PERIPH_EN
|
|
palWriteLine(HAL_GPIO_PIN_nVDD_5V_PERIPH_EN, 0);
|
|
#endif
|
|
#ifdef HAL_GPIO_PIN_nVDD_5V_HIPOWER_EN
|
|
palWriteLine(HAL_GPIO_PIN_nVDD_5V_HIPOWER_EN, 0);
|
|
#endif
|
|
#ifdef HAL_GPIO_PIN_VDD_3V3_SENSORS_EN
|
|
// the TBS-Colibri-F7 needs PE3 low at power on
|
|
palWriteLine(HAL_GPIO_PIN_VDD_3V3_SENSORS_EN, 1);
|
|
#endif
|
|
#ifdef HAL_GPIO_PIN_nVDD_3V3_SD_CARD_EN
|
|
// the TBS-Colibri-F7 needs PG7 low for SD card
|
|
palWriteLine(HAL_GPIO_PIN_nVDD_3V3_SD_CARD_EN, 0);
|
|
#endif
|
|
#ifdef HAL_GPIO_PIN_VDD_3V3_SD_CARD_EN
|
|
// others need it active high
|
|
palWriteLine(HAL_GPIO_PIN_VDD_3V3_SD_CARD_EN, 1);
|
|
#endif
|
|
for (i=0; i<20; i++) {
|
|
// give 20ms for sensors to settle
|
|
chThdSleep(chTimeMS2I(1));
|
|
}
|
|
#endif
|
|
}
|
|
|
|
#if defined(STM32F7) || defined(STM32H7) || defined(STM32F4) || defined(STM32F3)
|
|
/*
|
|
read mode of a pin. This allows a pin config to be read, changed and
|
|
then written back
|
|
*/
|
|
iomode_t palReadLineMode(ioline_t line)
|
|
{
|
|
ioportid_t port = PAL_PORT(line);
|
|
uint8_t pad = PAL_PAD(line);
|
|
iomode_t ret = 0;
|
|
ret |= (port->MODER >> (pad*2)) & 0x3;
|
|
ret |= ((port->OTYPER >> pad)&1) << 2;
|
|
ret |= ((port->OSPEEDR >> (pad*2))&3) << 3;
|
|
ret |= ((port->PUPDR >> (pad*2))&3) << 5;
|
|
if (pad < 8) {
|
|
ret |= ((port->AFRL >> (pad*4))&0xF) << 7;
|
|
} else {
|
|
ret |= ((port->AFRH >> ((pad-8)*4))&0xF) << 7;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
set pin as pullup, pulldown or floating
|
|
*/
|
|
void palLineSetPushPull(ioline_t line, enum PalPushPull pp)
|
|
{
|
|
ioportid_t port = PAL_PORT(line);
|
|
uint8_t pad = PAL_PAD(line);
|
|
port->PUPDR = (port->PUPDR & ~(3<<(pad*2))) | (pp<<(pad*2));
|
|
}
|
|
|
|
#endif // F7, H7, F4
|
|
|
|
void stm32_cacheBufferInvalidate(const void *p, size_t size)
|
|
{
|
|
cacheBufferInvalidate(p, size);
|
|
}
|
|
|
|
void stm32_cacheBufferFlush(const void *p, size_t size)
|
|
{
|
|
cacheBufferFlush(p, size);
|
|
}
|
|
|
|
|
|
#ifdef HAL_GPIO_PIN_FAULT
|
|
/*
|
|
optional support for hard-fault debugging using soft-serial output to a pin
|
|
To use this setup a pin like this:
|
|
|
|
Pxx FAULT OUTPUT HIGH
|
|
|
|
for some pin Pxx
|
|
|
|
On a STM32F405 the baudrate will be around 42kBaud. Use the
|
|
auto-baud function on your logic analyser to decode
|
|
*/
|
|
/*
|
|
send one bit out a debug line
|
|
*/
|
|
static void fault_send_bit(ioline_t line, uint8_t b)
|
|
{
|
|
palWriteLine(line, b);
|
|
for (uint32_t i=0; i<1000; i++) {
|
|
palWriteLine(line, b);
|
|
}
|
|
}
|
|
|
|
/*
|
|
send a byte out a debug line
|
|
*/
|
|
static void fault_send_byte(ioline_t line, uint8_t b)
|
|
{
|
|
fault_send_bit(line, 0); // start bit
|
|
for (uint8_t i=0; i<8; i++) {
|
|
uint8_t bit = (b & (1U<<i))?1:0;
|
|
fault_send_bit(line, bit);
|
|
}
|
|
fault_send_bit(line, 1); // stop bit
|
|
}
|
|
|
|
/*
|
|
send a string out a debug line
|
|
*/
|
|
static void fault_send_string(const char *str)
|
|
{
|
|
while (*str) {
|
|
fault_send_byte(HAL_GPIO_PIN_FAULT, (uint8_t)*str++);
|
|
}
|
|
fault_send_byte(HAL_GPIO_PIN_FAULT, (uint8_t)'\n');
|
|
}
|
|
|
|
void fault_printf(const char *fmt, ...)
|
|
{
|
|
static char buffer[100];
|
|
va_list ap;
|
|
va_start(ap, fmt);
|
|
vsnprintf(buffer, sizeof(buffer), fmt, ap);
|
|
va_end(ap);
|
|
fault_send_string(buffer);
|
|
}
|
|
#endif // HAL_GPIO_PIN_HARDFAULT
|
|
|
|
void system_halt_hook(void)
|
|
{
|
|
#ifdef HAL_GPIO_PIN_FAULT
|
|
// optionally print the message on a fault pin
|
|
while (true) {
|
|
fault_printf("PANIC:%s\n", ch.dbg.panic_msg);
|
|
fault_printf("RA0:0x%08x\n", __builtin_return_address(0));
|
|
}
|
|
#endif
|
|
}
|
|
|
|
// hook for stack overflow
|
|
void stack_overflow(thread_t *tp)
|
|
{
|
|
#if !defined(HAL_BOOTLOADER_BUILD) && !defined(IOMCU_FW)
|
|
extern void AP_stack_overflow(const char *thread_name);
|
|
AP_stack_overflow(tp->name);
|
|
// if we get here then we are armed and got a stack overflow. We
|
|
// will report an internal error and keep trying to fly. We are
|
|
// quite likely to crash anyway due to memory corruption. The
|
|
// watchdog data should record the thread name and fault type
|
|
#else
|
|
(void)tp;
|
|
#endif
|
|
}
|