ardupilot/ArduCopter/takeoff.cpp

190 lines
5.9 KiB
C++

#include "Copter.h"
Copter::Mode::_TakeOff Copter::Mode::takeoff;
// This file contains the high-level takeoff logic for Loiter, PosHold, AltHold, Sport modes.
// The take-off can be initiated from a GCS NAV_TAKEOFF command which includes a takeoff altitude
// A safe takeoff speed is calculated and used to calculate a time_ms
// the pos_control target is then slowly increased until time_ms expires
bool Copter::Mode::do_user_takeoff_start(float takeoff_alt_cm)
{
copter.flightmode->takeoff.start(takeoff_alt_cm);
return true;
}
// initiate user takeoff - called when MAVLink TAKEOFF command is received
bool Copter::Mode::do_user_takeoff(float takeoff_alt_cm, bool must_navigate)
{
if (!copter.motors->armed()) {
return false;
}
if (!ap.land_complete) {
// can't takeoff again!
return false;
}
if (!has_user_takeoff(must_navigate)) {
// this mode doesn't support user takeoff
return false;
}
if (takeoff_alt_cm <= copter.current_loc.alt) {
// can't takeoff downwards...
return false;
}
#if FRAME_CONFIG == HELI_FRAME
// Helicopters should return false if MAVlink takeoff command is received while the rotor is not spinning
if (!copter.motors->rotor_runup_complete()) {
return false;
}
#endif
if (!do_user_takeoff_start(takeoff_alt_cm)) {
return false;
}
copter.set_auto_armed(true);
return true;
}
// start takeoff to specified altitude above home in centimeters
void Copter::Mode::_TakeOff::start(float alt_cm)
{
// calculate climb rate
const float speed = MIN(copter.wp_nav->get_default_speed_up(), MAX(copter.g.pilot_speed_up*2.0f/3.0f, copter.g.pilot_speed_up-50.0f));
// sanity check speed and target
if (running() || speed <= 0.0f || alt_cm <= 0.0f) {
return;
}
// initialise takeoff state
_running = true;
max_speed = speed;
start_ms = millis();
alt_delta = alt_cm;
}
// stop takeoff
void Copter::Mode::_TakeOff::stop()
{
_running = false;
start_ms = 0;
}
// returns pilot and takeoff climb rates
// pilot_climb_rate is both an input and an output
// takeoff_climb_rate is only an output
// has side-effect of turning takeoff off when timeout as expired
void Copter::Mode::_TakeOff::get_climb_rates(float& pilot_climb_rate,
float& takeoff_climb_rate)
{
// return pilot_climb_rate if take-off inactive
if (!_running) {
takeoff_climb_rate = 0.0f;
return;
}
// acceleration of 50cm/s/s
static constexpr float TAKEOFF_ACCEL = 50.0f;
const float takeoff_minspeed = MIN(50.0f, max_speed);
const float time_elapsed = (millis() - start_ms) * 1.0e-3f;
const float speed = MIN(time_elapsed * TAKEOFF_ACCEL + takeoff_minspeed, max_speed);
const float time_to_max_speed = (max_speed - takeoff_minspeed) / TAKEOFF_ACCEL;
float height_gained;
if (time_elapsed <= time_to_max_speed) {
height_gained = 0.5f * TAKEOFF_ACCEL * sq(time_elapsed) + takeoff_minspeed * time_elapsed;
} else {
height_gained = 0.5f * TAKEOFF_ACCEL * sq(time_to_max_speed) + takeoff_minspeed * time_to_max_speed +
(time_elapsed - time_to_max_speed) * max_speed;
}
// check if the takeoff is over
if (height_gained >= alt_delta) {
stop();
}
// if takeoff climb rate is zero return
if (speed <= 0.0f) {
takeoff_climb_rate = 0.0f;
return;
}
// default take-off climb rate to maximum speed
takeoff_climb_rate = speed;
// if pilot's commands descent
if (pilot_climb_rate < 0.0f) {
// if overall climb rate is still positive, move to take-off climb rate
if (takeoff_climb_rate + pilot_climb_rate > 0.0f) {
takeoff_climb_rate = takeoff_climb_rate + pilot_climb_rate;
pilot_climb_rate = 0.0f;
} else {
// if overall is negative, move to pilot climb rate
pilot_climb_rate = pilot_climb_rate + takeoff_climb_rate;
takeoff_climb_rate = 0.0f;
}
} else { // pilot commands climb
// pilot climb rate is zero until it surpasses the take-off climb rate
if (pilot_climb_rate > takeoff_climb_rate) {
pilot_climb_rate = pilot_climb_rate - takeoff_climb_rate;
} else {
pilot_climb_rate = 0.0f;
}
}
}
void Copter::Mode::auto_takeoff_set_start_alt(void)
{
// start with our current altitude
auto_takeoff_no_nav_alt_cm = inertial_nav.get_altitude();
if (!motors->armed() || !ap.auto_armed || !motors->get_interlock() || ap.land_complete) {
// we are not flying, add the wp_navalt_min
auto_takeoff_no_nav_alt_cm += g2.wp_navalt_min * 100;
}
}
/*
call attitude controller for automatic takeoff, limiting roll/pitch
if below wp_navalt_min
*/
void Copter::Mode::auto_takeoff_attitude_run(float target_yaw_rate)
{
float nav_roll, nav_pitch;
if (g2.wp_navalt_min > 0 && inertial_nav.get_altitude() < auto_takeoff_no_nav_alt_cm) {
// we haven't reached the takeoff navigation altitude yet
nav_roll = 0;
nav_pitch = 0;
#if FRAME_CONFIG == HELI_FRAME
// prevent hover roll starting till past specified altitude
copter.hover_roll_trim_scalar_slew = 0;
#endif
// tell the position controller that we have limited roll/pitch demand to prevent integrator buildup
pos_control->set_limit_accel_xy();
} else {
nav_roll = wp_nav->get_roll();
nav_pitch = wp_nav->get_pitch();
}
// roll & pitch from waypoint controller, yaw rate from pilot
attitude_control->input_euler_angle_roll_pitch_euler_rate_yaw(nav_roll, nav_pitch, target_yaw_rate);
}
bool Copter::Mode::is_taking_off() const
{
if (!has_user_takeoff(false)) {
return false;
}
if (ap.land_complete) {
return false;
}
if (takeoff.running()) {
return true;
}
return false;
}