.. |
CUAV-Nora
|
HAL_ChibiOS: update power VALID pins
|
2020-06-04 09:51:27 +10:00 |
CUAV-X7
|
HAL_ChibiOS: make PowerC primary power on CUAV-X7
|
2020-10-24 08:27:21 +11:00 |
CUAV_GPS
|
HAL_ChibiOS: hwdef: modify to use HAL CAN driver instead of ChibiOS's
|
2020-09-24 12:32:19 +10:00 |
CUAVv5
|
AP_HAL_ChibiOS: Correct the README.md for fmuv5 boards
|
2019-07-12 10:59:48 +01:00 |
CUAVv5Nano
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
CubeBlack
|
HAL_ChibiOS: add support for adding board validation test
|
2020-04-10 07:04:21 +10:00 |
CubeBlack+
|
ChibiOS: fix cubeblack+ name and usbid
|
2020-10-24 08:26:55 +11:00 |
CubeBlack-periph
|
hwdef: add support for CubeBlack-periph
|
2020-10-08 09:31:35 +11:00 |
CubeGreen-solo
|
Frame_params: Updated solo params for Copter 4
|
2019-11-08 07:28:17 +08:00 |
CubeOrange
|
hwdef: CubeOrange: do power reset on peripherals and sensor at boot
|
2020-09-16 18:08:08 +10:00 |
CubeOrange-periph
|
AP_Bootloader: use new hal CAN interface for CAN support
|
2020-09-24 12:32:19 +10:00 |
CubePurple
|
HAL_ChibiOS: added sensor config for cube varients
|
2019-05-30 15:39:57 +10:00 |
CubeSolo
|
Frame_params: Updated solo params for Copter 4
|
2019-11-08 07:28:17 +08:00 |
CubeYellow
|
HAL_ChibiOS: define polarity of 3.3/5v selection for PWM
|
2020-07-21 08:47:27 +10:00 |
DrotekP3Pro
|
AP_HAL_ChibiOS: DrotekP3Pro serial5 to mavlink2
|
2020-06-30 09:42:49 +10:00 |
Durandal
|
HAL_ChibiOS: enable telem3 on Durandal
|
2020-10-03 20:22:56 +10:00 |
F4BY
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
F35Lightning
|
HAL_ChibiOS: fixed fast sampling on F32Lightning
|
2020-09-02 06:42:44 +10:00 |
KakuteF4
|
AP_HAL_ChibiOS: disable AP_Mount on "mini" boards
|
2020-08-04 09:18:14 +10:00 |
KakuteF7
|
AP_HAL_ChibiOS: disable OSD parameters on F7 1Mb boards with SD cards
|
2020-09-10 18:10:32 +10:00 |
KakuteF7Mini
|
AP_HAL_ChibiOS: fix kakutef7/mini motor glitch when using dshot
|
2020-09-08 18:57:30 +10:00 |
MatekF405
|
HAL_ChibiOS: removed EKF2 define, not needed any more
|
2020-05-10 15:09:54 +10:00 |
MatekF405-STD
|
HAL_ChibiOS: convert matek boards
|
2019-05-30 15:39:57 +10:00 |
MatekF405-Wing
|
HAL_ChibiOS: Add DPS310 for MatekF405-WING,F765-WING and H743
|
2020-06-22 19:35:01 +10:00 |
MatekF765-Wing
|
HAL_ChibiOS: Add DPS310 for MatekF405-WING,F765-WING and H743
|
2020-06-22 19:35:01 +10:00 |
MatekH743
|
HAL_ChibiOS: Add DPS310 for MatekF405-WING,F765-WING and H743
|
2020-06-22 19:35:01 +10:00 |
MazzyStarDrone
|
AP_HAL_ChibiOS:add mazzy star drone hwdef
|
2020-11-17 17:57:07 +11:00 |
NucleoH743
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
OMNIBUSF7V2
|
AP_ChibiOS: fix configuration number in OmnibusF7V2 hwdef
|
2020-09-23 07:35:22 +10:00 |
OmnibusNanoV6
|
AP_HAL_ChibiOS: add USART3 as alt config on OmnibusNanoV6
|
2020-09-07 15:34:01 +10:00 |
PH4-mini
|
HAL_ChibiOS: Correct a typo and Update product link url for PH4-mini
|
2020-11-24 12:48:11 +11:00 |
Pix32v5
|
HAL_ChibiOS: added BL suffix to bootloader USB IDs for two boards
|
2020-10-13 17:59:13 +11:00 |
Pixhawk1
|
HAL_ChibiOS: fixed Pixhawk1 gyro orientation
|
2019-08-27 19:29:37 +10:00 |
Pixhawk1-1M
|
AP_HAL_ChibiOS: avoid referencing flash sector/page 22 on 1MB boards
|
2020-03-03 10:13:53 +11:00 |
Pixhawk4
|
HAL_ChibiOS: fixed dshot docs for Pixhawk4
|
2020-02-08 14:15:37 +11:00 |
Pixracer
|
AP_HAL_ChibiOS: remove fmuv4 and update Pixracer
|
2020-07-13 15:24:54 +10:00 |
QioTekZealotF427
|
HAL_ChibiOS: add QMC5883L on QioTekZealotF427
|
2020-11-22 06:10:34 +11:00 |
R9Pilot
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
STM32CubeConf
|
HAL_ChibiOS: added new STM32Cube configs
|
2020-07-10 13:33:51 +10:00 |
SuccexF4
|
HAL_ChibiOS: removed EKF2 define, not needed any more
|
2020-05-10 15:09:54 +10:00 |
TBS-Colibri-F7
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
VRBrain-v51
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
VRBrain-v52
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
VRBrain-v54
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
VRCore-v10
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
VRUBrain-v51
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
ZubaxGNSS
|
HAL_ChibiOS: hwdef: modify to use HAL CAN driver instead of ChibiOS's
|
2020-09-24 12:32:19 +10:00 |
airbotf4
|
HAL_ChibiOS: removed EKF2 define, not needed any more
|
2020-05-10 15:09:54 +10:00 |
common
|
HAL_ChibiOS: added check for overwrite of nullptr on H7
|
2020-11-18 17:14:43 +11:00 |
crazyflie2
|
AP_HAL_ChibiOS: Added support for Bitcraze Crazyflie 2.1
|
2020-06-07 07:49:37 +10:00 |
f103-ADSB
|
HAL_ChibiOS: use DNA by default for all AP_Periph builds
|
2020-02-22 12:28:16 +11:00 |
f103-Airspeed
|
HAL_ChibiOS: added f103-Airspeed sensor
|
2020-08-25 09:59:15 +10:00 |
f103-GPS
|
AP_HAL_ChibiOS: enable all I2C compasses by default for f103 boards
|
2020-09-24 12:32:19 +10:00 |
f103-HWESC
|
HAL_ChibiOS: fixed build warnings for bootloader builds
|
2020-04-28 10:32:23 +10:00 |
f103-RangeFinder
|
HAL_ChibiOS: use DNA by default for all AP_Periph builds
|
2020-02-22 12:28:16 +11:00 |
f103-Trigger
|
HAL_ChibiOS: use DNA by default for all AP_Periph builds
|
2020-02-22 12:28:16 +11:00 |
f103-periph
|
AP_HAL_ChibiOS: add app start offset to leave space for params
|
2020-09-24 12:32:19 +10:00 |
f303-GPS
|
HAL_ChibiOS: use DNA by default for all AP_Periph builds
|
2020-02-22 12:28:16 +11:00 |
f303-HWESC
|
HAL_ChibiOS: fixed build warnings for bootloader builds
|
2020-04-28 10:32:23 +10:00 |
f303-M10025
|
hwdef: switch to (0) DNA as the default NODEID
|
2020-02-17 12:48:37 +11:00 |
f303-M10070
|
HAL_ChibiOS: fixed orientation of compass on M10070B
|
2020-11-08 16:13:17 +11:00 |
f303-MatekGPS
|
HAL_ChibiOS: fixed f303-MatekGPS build
|
2020-09-24 12:32:19 +10:00 |
f303-Universal
|
HAL_ChibiOS: use DNA by default for all AP_Periph builds
|
2020-02-22 12:28:16 +11:00 |
f303-periph
|
AP_HAL_ChibiOS/hwdef: fix misprint in comment
|
2020-11-14 08:00:40 +11:00 |
fmuv2
|
HAL_ChibiOS: removed EKF2 define, not needed any more
|
2020-05-10 15:09:54 +10:00 |
fmuv3
|
HAL_ChibiOS: update power VALID pins
|
2020-06-04 09:51:27 +10:00 |
fmuv5
|
HAL_ChibiOS: update power VALID pins
|
2020-06-04 09:51:27 +10:00 |
iomcu
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
luminousbee4
|
AP_HAL_ChibiOS: luminousbee4 serial5 to mavlink2
|
2020-06-30 09:42:49 +10:00 |
mRoControlZeroF7
|
HAL_ChibiOS: update power VALID pins
|
2020-06-04 09:51:27 +10:00 |
mRoControlZeroOEMH7
|
HAL_ChibiOS: Added support for mRo ControlZero OEM H7 flight controller
|
2020-11-18 18:28:24 +11:00 |
mRoNexus
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
mRoPixracerPro
|
hwdef:PixracerPro - Fix analog volt pin assignments
|
2020-11-03 08:17:54 +11:00 |
mRoX21
|
HAL_ChibiOS: changed optimisation of higher end boards to -O2
|
2019-09-28 08:57:26 +10:00 |
mRoX21-777
|
HAL_ChibiOS: added BL suffix to bootloader USB IDs for two boards
|
2020-10-13 17:59:13 +11:00 |
mindpx-v2
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
mini-pix
|
HAL_ChibiOS: update power VALID pins
|
2020-06-04 09:51:27 +10:00 |
omnibusf4
|
AP_HAL_ChibiOS: disable AP_Mount on "mini" boards
|
2020-08-04 09:18:14 +10:00 |
omnibusf4pro
|
AP_HAL_ChibiOS: hold buzzer ping low in bootloader for omnibusf4pro
|
2020-06-30 17:58:35 +10:00 |
omnibusf4v6
|
HAL_ChibiOS: removed EKF2 define, not needed any more
|
2020-05-10 15:09:54 +10:00 |
revo-mini
|
HAL_ChibiOS: removed EKF2 define, not needed any more
|
2020-05-10 15:09:54 +10:00 |
scripts
|
HAL_ChibiOS: Add af_parse for CubeMX pinout csv
|
2020-11-18 18:39:07 +11:00 |
skyviper-f412-rev1
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
skyviper-journey
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
skyviper-v2450
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
sparky2
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
speedybeef4
|
HAL_ChibiOS: removed EKF2 define, not needed any more
|
2020-05-10 15:09:54 +10:00 |