ardupilot/ArduCopter/surface_tracking.cpp

113 lines
4.3 KiB
C++

#include "Copter.h"
#if AP_RANGEFINDER_ENABLED
// update_surface_offset - manages the vertical offset of the position controller to follow the measured ground or ceiling
// level measured using the range finder.
void Copter::SurfaceTracking::update_surface_offset()
{
// check for timeout
const uint32_t now_ms = millis();
const bool timeout = (now_ms - last_update_ms) > SURFACE_TRACKING_TIMEOUT_MS;
// check tracking state and that range finders are healthy
if (((surface == Surface::GROUND) && copter.rangefinder_alt_ok() && (copter.rangefinder_state.glitch_count == 0)) ||
((surface == Surface::CEILING) && copter.rangefinder_up_ok() && (copter.rangefinder_up_state.glitch_count == 0))) {
// Get the appropriate surface distance state, the terrain offset is calculated in the surface distance lib.
AP_SurfaceDistance &rf_state = (surface == Surface::GROUND) ? copter.rangefinder_state : copter.rangefinder_up_state;
// update position controller target offset to the surface's alt above the EKF origin
copter.pos_control->set_pos_offset_target_z_cm(rf_state.terrain_offset_cm);
last_update_ms = now_ms;
valid_for_logging = true;
// reset target altitude if this controller has just been engaged
// target has been changed between upwards vs downwards
// or glitch has cleared
if (timeout ||
reset_target ||
(last_glitch_cleared_ms != rf_state.glitch_cleared_ms)) {
copter.pos_control->set_pos_offset_z_cm(rf_state.terrain_offset_cm);
reset_target = false;
last_glitch_cleared_ms = rf_state.glitch_cleared_ms;
}
} else {
// reset position controller offsets if surface tracking is inactive
// flag target should be reset when/if it next becomes active
if (timeout) {
copter.pos_control->set_pos_offset_z_cm(0);
copter.pos_control->set_pos_offset_target_z_cm(0);
reset_target = true;
}
}
}
// get target altitude (in cm) above ground
// returns true if there is a valid target
bool Copter::SurfaceTracking::get_target_alt_cm(float &target_alt_cm) const
{
// fail if we are not tracking downwards
if (surface != Surface::GROUND) {
return false;
}
// check target has been updated recently
if (AP_HAL::millis() - last_update_ms > SURFACE_TRACKING_TIMEOUT_MS) {
return false;
}
target_alt_cm = (copter.pos_control->get_pos_target_z_cm() - copter.pos_control->get_pos_offset_z_cm());
return true;
}
// set target altitude (in cm) above ground
void Copter::SurfaceTracking::set_target_alt_cm(float _target_alt_cm)
{
// fail if we are not tracking downwards
if (surface != Surface::GROUND) {
return;
}
copter.pos_control->set_pos_offset_z_cm(copter.inertial_nav.get_position_z_up_cm() - _target_alt_cm);
last_update_ms = AP_HAL::millis();
}
bool Copter::SurfaceTracking::get_target_dist_for_logging(float &target_dist) const
{
if (!valid_for_logging || (surface == Surface::NONE)) {
return false;
}
const float dir = (surface == Surface::GROUND) ? 1.0f : -1.0f;
target_dist = dir * (copter.pos_control->get_pos_target_z_cm() - copter.pos_control->get_pos_offset_z_cm()) * 0.01f;
return true;
}
float Copter::SurfaceTracking::get_dist_for_logging() const
{
return ((surface == Surface::CEILING) ? copter.rangefinder_up_state.alt_cm : copter.rangefinder_state.alt_cm) * 0.01f;
}
// set direction
void Copter::SurfaceTracking::set_surface(Surface new_surface)
{
if (surface == new_surface) {
return;
}
// check we have a range finder in the correct direction
if ((new_surface == Surface::GROUND) && !copter.rangefinder.has_orientation(ROTATION_PITCH_270)) {
copter.gcs().send_text(MAV_SEVERITY_WARNING, "SurfaceTracking: no downward rangefinder");
AP_Notify::events.user_mode_change_failed = 1;
return;
}
if ((new_surface == Surface::CEILING) && !copter.rangefinder.has_orientation(ROTATION_PITCH_90)) {
copter.gcs().send_text(MAV_SEVERITY_WARNING, "SurfaceTracking: no upward rangefinder");
AP_Notify::events.user_mode_change_failed = 1;
return;
}
surface = new_surface;
reset_target = true;
}
#endif // AP_RANGEFINDER_ENABLED