Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
ardupilot/ArduCopter/motors_octa.pde

328 lines
9.8 KiB
Plaintext
Raw Blame History

/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
#if FRAME_CONFIG == OCTA_FRAME
static void init_motors_out()
{
#if INSTANT_PWM == 0
APM_RC.SetFastOutputChannels(_BV(MOT_1) | _BV(MOT_2) | _BV(MOT_3) | _BV(MOT_4)
| _BV(MOT_5) | _BV(MOT_6) | _BV(MOT_7) | _BV(MOT_8),
g.rc_speed);
#endif
}
static void motors_output_enable()
{
APM_RC.enable_out(MOT_1);
APM_RC.enable_out(MOT_2);
APM_RC.enable_out(MOT_3);
APM_RC.enable_out(MOT_4);
APM_RC.enable_out(MOT_5);
APM_RC.enable_out(MOT_6);
APM_RC.enable_out(MOT_7);
APM_RC.enable_out(MOT_8);
}
static void output_motors_armed()
{
int roll_out, pitch_out;
int out_min = g.rc_3.radio_min;
int out_max = g.rc_3.radio_max;
// Throttle is 0 to 1000 only
g.rc_3.servo_out = constrain(g.rc_3.servo_out, 0, MAXIMUM_THROTTLE);
if(g.rc_3.servo_out > 0)
out_min = g.rc_3.radio_min + MINIMUM_THROTTLE;
g.rc_1.calc_pwm();
g.rc_2.calc_pwm();
g.rc_3.calc_pwm();
g.rc_4.calc_pwm();
if(g.frame_orientation == X_FRAME){
roll_out = (float)g.rc_1.pwm_out * 0.4;
pitch_out = (float)g.rc_2.pwm_out * 0.4;
//Front side
motor_out[MOT_1] = g.rc_3.radio_out + g.rc_2.pwm_out - roll_out; // CW FRONT RIGHT
motor_out[MOT_5] = g.rc_3.radio_out + g.rc_2.pwm_out + roll_out; // CCW FRONT LEFT
//Back side
motor_out[MOT_2] = g.rc_3.radio_out - g.rc_2.pwm_out + roll_out; // CW BACK LEFT
motor_out[MOT_4] = g.rc_3.radio_out - g.rc_2.pwm_out - roll_out; // CCW BACK RIGHT
//Left side
motor_out[MOT_7] = g.rc_3.radio_out + g.rc_1.pwm_out + pitch_out; // CW LEFT FRONT
motor_out[MOT_6] = g.rc_3.radio_out + g.rc_1.pwm_out - pitch_out; // CCW LEFT BACK
//Right side
motor_out[MOT_8] = g.rc_3.radio_out - g.rc_1.pwm_out - pitch_out; // CW RIGHT BACK
motor_out[MOT_3] = g.rc_3.radio_out - g.rc_1.pwm_out + pitch_out; // CCW RIGHT FRONT
}else if(g.frame_orientation == PLUS_FRAME){
roll_out = (float)g.rc_1.pwm_out * 0.71;
pitch_out = (float)g.rc_2.pwm_out * 0.71;
//Front side
motor_out[MOT_1] = g.rc_3.radio_out + g.rc_2.pwm_out; // CW FRONT
motor_out[MOT_3] = g.rc_3.radio_out - roll_out + pitch_out; // CCW FRONT RIGHT
motor_out[MOT_5] = g.rc_3.radio_out + roll_out + pitch_out; // CCW FRONT LEFT
//Left side
motor_out[MOT_7] = g.rc_3.radio_out + g.rc_1.pwm_out; // CW LEFT
//Right side
motor_out[MOT_8] = g.rc_3.radio_out - g.rc_1.pwm_out; // CW RIGHT
//Back side
motor_out[MOT_2] = g.rc_3.radio_out - g.rc_2.pwm_out; // CW BACK
motor_out[MOT_4] = g.rc_3.radio_out - roll_out - pitch_out; // CCW BACK RIGHT
motor_out[MOT_6] = g.rc_3.radio_out + roll_out - pitch_out; // CCW BACK LEFT
}else if(g.frame_orientation == V_FRAME){
int roll_out2, pitch_out2;
int roll_out3, pitch_out3;
int roll_out4, pitch_out4;
roll_out = g.rc_1.pwm_out;
pitch_out = g.rc_2.pwm_out;
roll_out2 = (float)g.rc_1.pwm_out * 0.833;
pitch_out2 = (float)g.rc_2.pwm_out * 0.34;
roll_out3 = (float)g.rc_1.pwm_out * 0.666;
pitch_out3 = (float)g.rc_2.pwm_out * 0.32;
roll_out4 = g.rc_1.pwm_out / 2;
pitch_out4 = (float)g.rc_2.pwm_out * 0.98;
//Front side
motor_out[MOT_7] = g.rc_3.radio_out + g.rc_2.pwm_out - roll_out; // CW FRONT RIGHT
motor_out[MOT_5] = g.rc_3.radio_out + g.rc_2.pwm_out + roll_out; // CCW FRONT LEFT
//Left side
motor_out[MOT_1] = g.rc_3.radio_out + g.rc_1.pwm_out + pitch_out2; // CW LEFT FRONT
motor_out[MOT_3] = g.rc_3.radio_out + g.rc_1.pwm_out - pitch_out3; // CCW LEFT BACK
//Right side
motor_out[MOT_2] = g.rc_3.radio_out - g.rc_1.pwm_out - pitch_out3; // CW RIGHT BACK
motor_out[MOT_6] = g.rc_3.radio_out - g.rc_1.pwm_out + pitch_out2; // CCW RIGHT FRONT
//Back side
motor_out[MOT_8] = g.rc_3.radio_out - g.rc_2.pwm_out + roll_out4; // CW BACK LEFT
motor_out[MOT_4] = g.rc_3.radio_out - g.rc_2.pwm_out - roll_out4; // CCW BACK RIGHT
}
// Yaw
motor_out[MOT_3] += g.rc_4.pwm_out; // CCW
motor_out[MOT_4] += g.rc_4.pwm_out; // CCW
motor_out[MOT_5] += g.rc_4.pwm_out; // CCW
motor_out[MOT_6] += g.rc_4.pwm_out; // CCW
motor_out[MOT_1] -= g.rc_4.pwm_out; // CW
motor_out[MOT_2] -= g.rc_4.pwm_out; // CW
motor_out[MOT_7] -= g.rc_4.pwm_out; // CW
motor_out[MOT_8] -= g.rc_4.pwm_out; // CW
// TODO add stability patch
motor_out[MOT_1] = min(motor_out[MOT_1], out_max);
motor_out[MOT_2] = min(motor_out[MOT_2], out_max);
motor_out[MOT_3] = min(motor_out[MOT_3], out_max);
motor_out[MOT_4] = min(motor_out[MOT_4], out_max);
motor_out[MOT_5] = min(motor_out[MOT_5], out_max);
motor_out[MOT_6] = min(motor_out[MOT_6], out_max);
motor_out[MOT_7] = min(motor_out[MOT_7], out_max);
motor_out[MOT_8] = min(motor_out[MOT_8], out_max);
// limit output so motors don't stop
motor_out[MOT_1] = max(motor_out[MOT_1], out_min);
motor_out[MOT_2] = max(motor_out[MOT_2], out_min);
motor_out[MOT_3] = max(motor_out[MOT_3], out_min);
motor_out[MOT_4] = max(motor_out[MOT_4], out_min);
motor_out[MOT_5] = max(motor_out[MOT_5], out_min);
motor_out[MOT_6] = max(motor_out[MOT_6], out_min);
motor_out[MOT_7] = max(motor_out[MOT_7], out_min);
motor_out[MOT_8] = max(motor_out[MOT_8], out_min);
#if CUT_MOTORS == ENABLED
// if we are not sending a throttle output, we cut the motors
if(g.rc_3.servo_out == 0){
motor_out[MOT_1] = g.rc_3.radio_min;
motor_out[MOT_2] = g.rc_3.radio_min;
motor_out[MOT_3] = g.rc_3.radio_min;
motor_out[MOT_4] = g.rc_3.radio_min;
motor_out[MOT_5] = g.rc_3.radio_min;
motor_out[MOT_6] = g.rc_3.radio_min;
motor_out[MOT_7] = g.rc_3.radio_min;
motor_out[MOT_8] = g.rc_3.radio_min;
}
#endif
// this filter slows the acceleration of motors vs the deceleration
// Idea by Denny Rowland to help with his Yaw issue
for(int8_t m = 1; m <= 8; m++){
int c = ch_of_mot(m);
if(motor_filtered[c] < motor_out[c]){
motor_filtered[c] = (motor_out[c] + motor_filtered[c]) / 2;
}else{
// don't filter
motor_filtered[c] = motor_out[c];
}
}
APM_RC.OutputCh(MOT_1, motor_filtered[MOT_1]);
APM_RC.OutputCh(MOT_2, motor_filtered[MOT_2]);
APM_RC.OutputCh(MOT_3, motor_filtered[MOT_3]);
APM_RC.OutputCh(MOT_4, motor_filtered[MOT_4]);
APM_RC.OutputCh(MOT_5, motor_filtered[MOT_5]);
APM_RC.OutputCh(MOT_6, motor_filtered[MOT_6]);
APM_RC.OutputCh(MOT_7, motor_filtered[MOT_7]);
APM_RC.OutputCh(MOT_8, motor_filtered[MOT_8]);
#if INSTANT_PWM == 1
// InstantPWM
APM_RC.Force_Out0_Out1();
APM_RC.Force_Out2_Out3();
APM_RC.Force_Out6_Out7();
#endif
}
static void output_motors_disarmed()
{
if(g.rc_3.control_in > 0){
// we have pushed up the throttle
// remove safety
motor_auto_armed = true;
}
// fill the motor_out[] array for HIL use
for (unsigned char i = 0; i < 11; i++){
motor_out[i] = g.rc_3.radio_min;
}
// Send commands to motors
APM_RC.OutputCh(MOT_1, g.rc_3.radio_min);
APM_RC.OutputCh(MOT_2, g.rc_3.radio_min);
APM_RC.OutputCh(MOT_5, g.rc_3.radio_min);
APM_RC.OutputCh(MOT_6, g.rc_3.radio_min);
APM_RC.OutputCh(MOT_8, g.rc_3.radio_min);
APM_RC.OutputCh(MOT_3, g.rc_3.radio_min);
APM_RC.OutputCh(MOT_4, g.rc_3.radio_min);
APM_RC.OutputCh(MOT_7, g.rc_3.radio_min);
}
static void output_motor_test()
{
motor_out[MOT_1] = g.rc_3.radio_min;
motor_out[MOT_2] = g.rc_3.radio_min;
motor_out[MOT_3] = g.rc_3.radio_min;
motor_out[MOT_4] = g.rc_3.radio_min;
motor_out[MOT_5] = g.rc_3.radio_min;
motor_out[MOT_6] = g.rc_3.radio_min;
motor_out[MOT_7] = g.rc_3.radio_min;
motor_out[MOT_8] = g.rc_3.radio_min;
if(g.frame_orientation == X_FRAME || g.frame_orientation == PLUS_FRAME){
APM_RC.OutputCh(MOT_5, g.rc_3.radio_min);
delay(4000);
APM_RC.OutputCh(MOT_1, g.rc_3.radio_min + 100);
delay(300);
APM_RC.OutputCh(MOT_1, g.rc_3.radio_min);
delay(2000);
APM_RC.OutputCh(MOT_3, g.rc_3.radio_min + 100);
delay(300);
APM_RC.OutputCh(MOT_3, g.rc_3.radio_min);
delay(2000);
APM_RC.OutputCh(MOT_8, g.rc_3.radio_min + 100);
delay(300);
APM_RC.OutputCh(MOT_8, g.rc_3.radio_min);
delay(2000);
APM_RC.OutputCh(MOT_4, g.rc_3.radio_min + 100);
delay(300);
APM_RC.OutputCh(MOT_4, g.rc_3.radio_min);
delay(2000);
APM_RC.OutputCh(MOT_2, g.rc_3.radio_min + 100);
delay(300);
APM_RC.OutputCh(MOT_2, g.rc_3.radio_min);
delay(2000);
APM_RC.OutputCh(MOT_6, g.rc_3.radio_min + 100);
delay(300);
APM_RC.OutputCh(MOT_6, g.rc_3.radio_min);
delay(2000);
APM_RC.OutputCh(MOT_7, g.rc_3.radio_min + 100);
delay(300);
APM_RC.OutputCh(MOT_7, g.rc_3.radio_min);
delay(2000);
APM_RC.OutputCh(MOT_5, g.rc_3.radio_min + 100);
delay(300);
}
if(g.frame_orientation == V_FRAME){
APM_RC.OutputCh(MOT_5, g.rc_3.radio_min);
delay(4000);
APM_RC.OutputCh(MOT_7, g.rc_3.radio_min + 100);
delay(300);
APM_RC.OutputCh(MOT_7, g.rc_3.radio_min);
delay(2000);
APM_RC.OutputCh(MOT_6, g.rc_3.radio_min + 100);
delay(300);
APM_RC.OutputCh(MOT_6, g.rc_3.radio_min);
delay(2000);
APM_RC.OutputCh(MOT_2, g.rc_3.radio_min + 100);
delay(300);
APM_RC.OutputCh(MOT_2, g.rc_3.radio_min);
delay(2000);
APM_RC.OutputCh(MOT_4, g.rc_3.radio_min + 100);
delay(300);
APM_RC.OutputCh(MOT_4, g.rc_3.radio_min);
delay(2000);
APM_RC.OutputCh(MOT_8, g.rc_3.radio_min + 100);
delay(300);
APM_RC.OutputCh(MOT_8, g.rc_3.radio_min);
delay(2000);
APM_RC.OutputCh(MOT_3, g.rc_3.radio_min + 100);
delay(300);
APM_RC.OutputCh(MOT_3, g.rc_3.radio_min);
delay(2000);
APM_RC.OutputCh(MOT_1, g.rc_3.radio_min + 100);
delay(300);
APM_RC.OutputCh(MOT_1, g.rc_3.radio_min);
delay(2000);
APM_RC.OutputCh(MOT_5, g.rc_3.radio_min + 100);
delay(300);
}
APM_RC.OutputCh(MOT_1, motor_out[MOT_1]);
APM_RC.OutputCh(MOT_2, motor_out[MOT_2]);
APM_RC.OutputCh(MOT_3, motor_out[MOT_3]);
APM_RC.OutputCh(MOT_4, motor_out[MOT_4]);
APM_RC.OutputCh(MOT_5, motor_out[MOT_5]);
APM_RC.OutputCh(MOT_6, motor_out[MOT_6]);
APM_RC.OutputCh(MOT_7, motor_out[MOT_7]);
APM_RC.OutputCh(MOT_8, motor_out[MOT_8]);
}
#endif
Reference in New Issue View Git Blame Copy Permalink