mirror of
https://github.com/ArduPilot/ardupilot
synced 2025-01-08 08:58:29 -04:00
127 lines
4.3 KiB
Plaintext
127 lines
4.3 KiB
Plaintext
2013-09-23
|
|
|
|
These notes describe the steps take to port ArduPilot to the Flymaple platform
|
|
http://www.open-drone.org/flymaple
|
|
|
|
Flymaple has an ARM based Cortex-3 STM32F103RE, 72MHz processor with 10DOF builtin sensors
|
|
|
|
|
|
Implementation
|
|
|
|
Unlike the Arduino versions of ArduPlane, the Flymaple port uses portions of
|
|
the libmaple library, including the stm32f1 core and some other libaries like
|
|
Wire, HardwareTimer, HArdwareSPI etc.
|
|
|
|
Most of the changes are confined to new directory libraries/AP_HAL_FLYMAPLE
|
|
which contains the Flymaple specific code. All the HAL modules have
|
|
been ported, sometimes based on HAL_AVR, sometimes HAL_PX4:
|
|
AnalogIn
|
|
AnalogSource
|
|
Console
|
|
GPIO
|
|
I2CDriver
|
|
RCInput
|
|
RCOoutput
|
|
Scheduler
|
|
Semaphores
|
|
SPIDriver
|
|
Storage
|
|
UARTDriver
|
|
Utility
|
|
|
|
The implementation of Storage uses EEPROM emulation code that uses 2 pages of
|
|
Flymaple FLASH ROM as EEPROM. It was copied from
|
|
AeroQuad_v3.2 to libraries/AP_HAL_FLYMAPLE/utility and slightly modified:
|
|
libraries/AP_HAL_FLYMAPLE/utility/EEPROM.*
|
|
libraries/AP_HAL_FLYMAPLE/utility/flash_stm32.*
|
|
|
|
Unlike other HAL ports, the namespace for Flymaple defined in
|
|
AP_HAL_FLYMAPLE_Namespace.h has a more extensive name: 'AP_HAL_FLYMAPLE_NS' else
|
|
get complaints from gcc 4.4.1 caused by collisions with other class names.
|
|
|
|
New board makefile mk/board/flymaple.mk, plus some other minor changes in
|
|
mk/*.mk
|
|
|
|
In other parts of the ArduPlane tree, the changes have been #ifdefed for
|
|
Flymaple except:
|
|
|
|
- ArduPlane/compat.pde
|
|
All the wiring compatibility functions have been inline-d, else get
|
|
contamination of the namespace at link time (multiple definitions of delay()
|
|
etc)
|
|
|
|
- libraries/AP_Compass/AP_Compass_HMC5843.cpp
|
|
- libraries/AP_Compass/Compass.h
|
|
- libraries/AP_Baro/AP_Baro_BMP085.cpp
|
|
Minor changes to raw data fetches to make them 32bit compatible. Should not
|
|
affect other platforms.
|
|
|
|
Some other minor edits to eliminate compiler warnings
|
|
|
|
Resource usage
|
|
Resources on the Flymaple board have been allocated by the HAL:
|
|
|
|
Pins
|
|
0 GPS Rx in
|
|
6 Receiver PPM in
|
|
7 GCS Rx in
|
|
8 GCS Tx out
|
|
15 3.3V board VCC analog in
|
|
16 Airspeed analog in (if available)
|
|
19 Battery current analog in (if available)
|
|
20 Battery voltage analog in (on-board divider connected to board VIN)
|
|
|
|
Timers
|
|
SysTick 100Hz normal timers
|
|
1 RCInput
|
|
2 Failsafe timer
|
|
3,4 RCOut
|
|
8 not used
|
|
|
|
Installation on Linux
|
|
|
|
Tested with:
|
|
libmaple https://github.com/leaflabs/libmaple http://leaflabs.com/docs/unix-toolchain.html
|
|
arm-none-eabi-g++ toolchain, version 4.4.1
|
|
on OpenSuSE 12.3
|
|
Mission Planner 1.2.78
|
|
|
|
You need a number of additional resources to build ArduPlane for Flymaple. I
|
|
have assumed that you will install them in your home directory, but they can really
|
|
go anywhere provided you make the appropriate changes
|
|
|
|
cd ~
|
|
git clone https://github.com/leaflabs/libmaple.git
|
|
cd libmaple
|
|
wget http://static.leaflabs.com/pub/codesourcery/gcc-arm-none-eabi-latest-linux32.tar.gz
|
|
tar xvzf gcc-arm-none-eabi-latest-linux32.tar.gz
|
|
export PATH=$PATH:~/libmaple/arm/bin
|
|
|
|
edit ArduPlane/config.mk to be something like:
|
|
#config.mk START
|
|
# Select maple_RET6 for Flymaple
|
|
BOARD = maple_RET6
|
|
# HAL_BOARD determines default HAL target.
|
|
HAL_BOARD ?= HAL_BOARD_FLYMAPLE
|
|
# The communication port used to communicate with the Flymaple
|
|
PORT = /dev/ttyACM0
|
|
# You must provide the path to the libmaple library directory:
|
|
LIBMAPLE_PATH = $(HOME)/libmaple
|
|
# Also, the ARM compiler tools MUST be in your current PATH
|
|
#config.mk END
|
|
|
|
Remaining issues:
|
|
|
|
1. For reasons I do not yet understand, the magnetic heading reported by
|
|
ArduPlance is 90 degrees away from what I think it should be.
|
|
The sensors on the Flymaple are all aligned with the nominal X, Y and Z axes
|
|
collinear. Pitch and roll axes point to the _corners_ of the board, not the
|
|
flat sides as might be considered normal for a sensor board.
|
|
Orientation is set to NONE, and yes, the reading of compass sensor registers
|
|
is in teh right order for the HMC5883.
|
|
|
|
2. Many alignment warnings emitted by the compiler from libraries/GCS_MAVLink
|
|
protocol.h eg:
|
|
mnt/disk2/src/ArduPlane-2.74b/libraries/GCS_MAVLink/include/mavlink/v1.0/ardupilotmega/../protocol.h: In function 'uint16_t _MAV_RETURN_uint16_t(const mavlink_message_t*, uint8_t)':
|
|
/mnt/disk2/src/ArduPlane-2.74b/libraries/GCS_MAVLink/include/mavlink/v1.0/ardupilotmega/../protocol.h:267: warning: cast from 'const char*' to 'const uint16_t*' increases required alignment of target type
|