ardupilot/libraries/AP_HAL_FLYMAPLE/SPIDriver.cpp

102 lines
2.3 KiB
C++

/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
Flymaple port by Mike McCauley
*/
#include <AP_HAL.h>
#if CONFIG_HAL_BOARD == HAL_BOARD_FLYMAPLE
// Flymaple SPI driver
// Flymaple has no actual SPI devices, so this generic
#include "SPIDriver.h"
#include "FlymapleWirish.h"
using namespace AP_HAL_FLYMAPLE_NS;
#define FLYMAPLE_SPI_CS_PIN 8
// Only one port so far:
#define FLYMAPLE_SPI_PORT 1
HardwareSPI spi(FLYMAPLE_SPI_PORT);
FLYMAPLESPIDeviceDriver::FLYMAPLESPIDeviceDriver()
{}
void FLYMAPLESPIDeviceDriver::init()
{
spi.begin(SPI_9MHZ, MSBFIRST, SPI_MODE_0);
digitalWrite(FLYMAPLE_SPI_CS_PIN, 1);
pinMode(FLYMAPLE_SPI_CS_PIN, OUTPUT);
}
AP_HAL::Semaphore* FLYMAPLESPIDeviceDriver::get_semaphore()
{
return &_semaphore;
}
void FLYMAPLESPIDeviceDriver::transaction(const uint8_t *tx, uint8_t *rx, uint16_t len)
{
cs_assert();
if (rx == NULL) {
for (uint16_t i = 0; i < len; i++) {
transfer(tx[i]);
}
} else {
for (uint16_t i = 0; i < len; i++) {
rx[i] = transfer(tx[i]);
}
}
cs_release();
}
void FLYMAPLESPIDeviceDriver::cs_assert()
{
digitalWrite(FLYMAPLE_SPI_CS_PIN, 0);
}
void FLYMAPLESPIDeviceDriver::cs_release()
{
digitalWrite(FLYMAPLE_SPI_CS_PIN, 1);
}
uint8_t FLYMAPLESPIDeviceDriver::transfer (uint8_t data)
{
return spi.transfer(data);
}
void FLYMAPLESPIDeviceDriver::transfer (const uint8_t *data, uint16_t len)
{
spi.write(data, len);
}
FLYMAPLESPIDeviceManager::FLYMAPLESPIDeviceManager()
{
}
void FLYMAPLESPIDeviceManager::init(void *)
{
}
AP_HAL::SPIDeviceDriver* FLYMAPLESPIDeviceManager::device(enum AP_HAL::SPIDevice)
{
_device.init(); // Defer this until GPIO pin 13 is set up else its a slave
return &_device;
}
#endif