mirror of https://github.com/ArduPilot/ardupilot
64 lines
1.9 KiB
Plaintext
64 lines
1.9 KiB
Plaintext
###########################################################################################################################################################
|
|
# mRo Pixracer Pro Flight Controller
|
|
# STM32H743IIK6
|
|
# 8 PWM / IO - DMA capable and hardware and/or software switchable 3.3v / 5v Logic (hardware default)
|
|
# Logic level set in hardware: No Solder for 5v, Solder 1-2 for 3.3v, Solder 2-3 for 3.3v / 5v software switchable
|
|
# Exposed JST GH Connectors: GPS UART+I2C connector, 6 Available UARTS (2 with Flow Control), 2 FDCAN, SPI, I2C, Power with analog current and voltage sense
|
|
# 3 IMUs (ICM20602 6DOF, ICM20948 9DOF, BMI088 6DOF)
|
|
# Baro, FRAM (256kb), SDCARD Socket, TC2030 JTAG, USB-C
|
|
# Onboard 3 color LED and buzzer
|
|
# Uncased weight and dimensions:
|
|
# Weight (with headers): 11.3g (.40oz)
|
|
# Length: 36mm (1.42in)
|
|
# Width: 36mm (1.42in)
|
|
# Mounting holes: 31.5mm x 31.5mm 4mm grommeted mounting holes for 3mm fasteners
|
|
# M10064C - Initial Release
|
|
###########################################################################################################################################################
|
|
|
|
# MCU class and specific type
|
|
MCU STM32H7xx STM32H743xx
|
|
|
|
# USB setup
|
|
USB_STRING_MANUFACTURER "mRo"
|
|
|
|
# crystal frequency
|
|
OSCILLATOR_HZ 24000000
|
|
|
|
# board ID for firmware load
|
|
APJ_BOARD_ID 1017
|
|
|
|
FLASH_SIZE_KB 2048
|
|
|
|
# bootloader is installed at zero offset
|
|
FLASH_RESERVE_START_KB 0
|
|
|
|
# the location where the bootloader will put the firmware
|
|
FLASH_BOOTLOADER_LOAD_KB 128
|
|
|
|
PB11 LED_BOOTLOADER OUTPUT
|
|
|
|
# define all 3 to make LED output White.
|
|
PB1 LED_ACTIVITY OUTPUT
|
|
PB3 LED_ACTIVITY2 OUTPUT
|
|
# PB11 LED_ACTIVITY3 OUTPUT
|
|
|
|
define HAL_LED_ON 0
|
|
|
|
# order of UARTs (and USB)
|
|
SERIAL_ORDER OTG1
|
|
|
|
PA11 OTG_FS_DM OTG1
|
|
PA12 OTG_FS_DP OTG1
|
|
|
|
PA13 JTMS-SWDIO SWD
|
|
PA14 JTCK-SWCLK SWD
|
|
|
|
# Add CS pins to ensure they are high in bootloader
|
|
PC2 ICM_20602_CS CS
|
|
PD7 BARO_CS CS
|
|
PD10 FRAM_CS CS SPEED_VERYLOW NODMA
|
|
PE15 ICM_20948_CS CS
|
|
PF10 BMI088_GYRO_CS CS
|
|
PF6 BMI088_ACCEL_CS CS
|
|
PG9 EXT_SPI_CS CS
|